From: Olivier Galibert <galibert@pobox.com>
To: James Bottomley <James.Bottomley@SteelEye.com>
Cc: SCSI Mailing List <linux-scsi@vger.kernel.org>,
"Hack inc." <linux-kernel@vger.kernel.org>
Subject: Re: Infinite interrupt loop, INTSTAT = 0
Date: Mon, 3 Oct 2005 15:42:10 +0200 [thread overview]
Message-ID: <20051003134210.GA10641@dspnet.fr.eu.org> (raw)
In-Reply-To: <1128175434.4921.9.camel@mulgrave>
On Sat, Oct 01, 2005 at 09:03:54AM -0500, James Bottomley wrote:
> The first thing to try here is to bring the offset down to 63 like all
> the other devices. You can do this by
>
> echo 63 > /sys/class/spi_transport/target1\:0\:0/max_offset
> echo 1 > /sys/class/spi_transport/target1\:0\:0/revalidate
>
> Which should retrigger the above domain validation but this time come
> back with an offset of 63.
Well, retriggering the DV blows:
Oct 3 15:39:03 m82 kernel: target1:0:0: Beginning Domain Validation
Oct 3 15:39:03 m82 kernel: target1:0:0: asynchronous.
Oct 3 15:39:03 m82 kernel: scsi1: Returning to Idle Loop
Oct 3 15:39:13 m82 kernel: scsi1:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x62 0x0
Oct 3 15:39:13 m82 kernel: scsi1: At time of recovery, card was not paused
Oct 3 15:39:13 m82 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Oct 3 15:39:13 m82 kernel: scsi1: Dumping Card State at program address 0x26 Mode 0x22
Oct 3 15:39:13 m82 kernel: Card was paused
Oct 3 15:39:13 m82 kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11]
Oct 3 15:39:13 m82 kernel: DFFSTAT[0x33] SCSISIGI[0x86] SCSIPHASE[0x10] SCSIBUS[0x0]
Oct 3 15:39:13 m82 kernel: LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0]
Oct 3 15:39:13 m82 kernel: SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0]
Oct 3 15:39:13 m82 kernel: SSTAT0[0x2] SSTAT1[0x19] SSTAT2[0x0] SSTAT3[0x0]
Oct 3 15:39:13 m82 kernel: PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0]
Oct 3 15:39:13 m82 kernel: LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
Oct 3 15:39:13 m82 kernel:
Oct 3 15:39:13 m82 kernel: SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0xff80
Oct 3 15:39:13 m82 kernel: qinstart = 85 qinfifonext = 85
Oct 3 15:39:13 m82 kernel: QINFIFO:
Oct 3 15:39:13 m82 kernel: WAITING_TID_QUEUES:
Oct 3 15:39:13 m82 kernel: Pending list:
Oct 3 15:39:13 m82 kernel: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7]
Oct 3 15:39:13 m82 kernel: Total 1
Oct 3 15:39:13 m82 kernel: Kernel Free SCB list: 3 1 0
Oct 3 15:39:13 m82 kernel: Sequencer Complete DMA-inprog list:
Oct 3 15:39:13 m82 kernel: Sequencer Complete list:
Oct 3 15:39:13 m82 kernel: Sequencer DMA-Up and Complete list:
Oct 3 15:39:13 m82 kernel:
Oct 3 15:39:13 m82 kernel: scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x2
Oct 3 15:39:13 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
Oct 3 15:39:13 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
Oct 3 15:39:13 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
Oct 3 15:39:13 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Oct 3 15:39:13 m82 kernel: scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
Oct 3 15:39:13 m82 kernel: SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
Oct 3 15:39:13 m82 kernel: SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
Oct 3 15:39:13 m82 kernel: SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
Oct 3 15:39:13 m82 kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
Oct 3 15:39:13 m82 kernel: LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Oct 3 15:39:13 m82 kernel: scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
Oct 3 15:39:13 m82 kernel: scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
Oct 3 15:39:13 m82 kernel: SIMODE0[0xc]
Oct 3 15:39:13 m82 kernel: CCSCBCTL[0x4]
Oct 3 15:39:13 m82 kernel: scsi1: REG0 == 0x2, SINDEX = 0x107, DINDEX = 0x102
Oct 3 15:39:13 m82 kernel: scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff01
Oct 3 15:39:13 m82 kernel: CDB 12 0 0 0 62 0
Oct 3 15:39:13 m82 kernel: STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Oct 3 15:39:13 m82 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Oct 3 15:39:13 m82 kernel: (scsi1:A:0:0): Device is disconnected, re-queuing SCB
Oct 3 15:39:14 m82 kernel: Recovery code sleeping
Oct 3 15:39:18 m82 kernel: Recovery code awake
Oct 3 15:39:18 m82 kernel: Timer Expired
Oct 3 15:39:18 m82 kernel: aic79xx_abort returns 0x2003
Oct 3 15:39:18 m82 kernel: scsi1:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0x62 0x0
Oct 3 15:39:18 m82 kernel: aic79xx_dev_reset returns 0x2003
Oct 3 15:39:18 m82 kernel: Recovery SCB completes
Oct 3 15:39:28 m82 kernel: target1:0:0: Domain Validation Initial Inquiry Failed
Oct 3 15:39:28 m82 kernel: target1:0:0: Ending Domain Validation
The two echo were done after a fresh reboot with no mount done on sdb
or sbc.
OG.
next prev parent reply other threads:[~2005-10-03 13:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-28 13:45 Infinite interrupt loop, INTSTAT = 0 Olivier Galibert
2005-09-28 15:05 ` James Bottomley
2005-09-28 16:07 ` Olivier Galibert
2005-09-28 16:24 ` James Bottomley
2005-09-28 16:42 ` Olivier Galibert
2005-09-28 17:10 ` Olivier Galibert
2005-09-28 17:13 ` Randy.Dunlap
2005-09-28 17:24 ` Arjan van de Ven
2005-09-28 17:51 ` James Bottomley
2005-09-28 18:33 ` Olivier Galibert
2005-10-01 14:03 ` James Bottomley
2005-10-03 13:42 ` Olivier Galibert [this message]
2005-10-03 16:15 ` James Bottomley
2005-10-04 8:45 ` Olivier Galibert
2005-10-04 13:23 ` James Bottomley
2005-10-04 14:55 ` Olivier Galibert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051003134210.GA10641@dspnet.fr.eu.org \
--to=galibert@pobox.com \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox