public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stephen Street <stephen@streetfiresound.com>
To: linux-kernel@vger.kernel.org
Cc: david-b@pacbell.net, spi-devel-general@lists.sourceforge.net,
	basicmark@yahoo.com, dpervushin@gmail.com
Subject: [PATCH/RFC 0/2] simple SPI controller implementation on PXA2xx SSP port
Date: Tue, 4 Oct 2005 15:28:17 -0700	[thread overview]
Message-ID: <200510041528.17439.stephen@streetfiresound.com> (raw)

Following this will be two patches, releasing an initial "SPI controller" 
implementation running on David Brownell's "simple SPI framework" and a 
prototype "SPI protocol" driver for the Cirrus Logic CS8415A SPD/IF decoder 
chip.  The controller should run on any PXA2xx SSP port and has been tested on
the PXA255 NSSP port.  Complete board setup and description facilities per the
the SPI framework are supported.

Your comments and suggestions encouraged!  You can e-mail me directly if you
have any question regarding running SPI controller on your board.

Thank you David for helping me make this real!

Stephen Street




             reply	other threads:[~2005-10-04 22:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-04 22:28 Stephen Street [this message]
2005-10-05  8:49 ` [PATCH/RFC 0/2] simple SPI controller implementation on PXA2xx SSP port Robert Schwebel
2005-10-05 16:18   ` Stephen Street

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200510041528.17439.stephen@streetfiresound.com \
    --to=stephen@streetfiresound.com \
    --cc=basicmark@yahoo.com \
    --cc=david-b@pacbell.net \
    --cc=dpervushin@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=spi-devel-general@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox