* Problems with iPaq synchronization
@ 2005-10-08 15:06 Ivan S. Dubrov
2005-10-08 16:14 ` Greg KH
0 siblings, 1 reply; 3+ messages in thread
From: Ivan S. Dubrov @ 2005-10-08 15:06 UTC (permalink / raw)
To: linux-kernel
Hello,
I'm trying to synchronize with my iPaq (rx3715) and get the following error
(in dmesg):
usb 1-1: new full speed USB device using ohci_hcd and address 9
ipaq 1-1:2.0: PocketPC PDA converter detected
drivers/usb/serial/ipaq.c: active config #2 != 1 ??
ipaq: probe of 1-1:2.0 failed with error -5
I have kernel 2.6.12-1-amd64-k8 from the Debian/AMD64 Etch distribution.
P.S. I've read sources a bit and found that the USB active configuration
can be selected by the hotplug, but it is not clear how (and if it can solve
the problem).
WBR,
Ivan Dubrov.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problems with iPaq synchronization
2005-10-08 15:06 Problems with iPaq synchronization Ivan S. Dubrov
@ 2005-10-08 16:14 ` Greg KH
2005-10-09 6:20 ` Ivan S. Dubrov
0 siblings, 1 reply; 3+ messages in thread
From: Greg KH @ 2005-10-08 16:14 UTC (permalink / raw)
To: Ivan S. Dubrov; +Cc: linux-kernel
On Sat, Oct 08, 2005 at 07:06:17PM +0400, Ivan S. Dubrov wrote:
> Hello,
>
> I'm trying to synchronize with my iPaq (rx3715) and get the following error
> (in dmesg):
>
> usb 1-1: new full speed USB device using ohci_hcd and address 9
> ipaq 1-1:2.0: PocketPC PDA converter detected
> drivers/usb/serial/ipaq.c: active config #2 != 1 ??
> ipaq: probe of 1-1:2.0 failed with error -5
>
> I have kernel 2.6.12-1-amd64-k8 from the Debian/AMD64 Etch distribution.
Does this happen when using 2.6.14-rc3?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-10-09 6:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-08 15:06 Problems with iPaq synchronization Ivan S. Dubrov
2005-10-08 16:14 ` Greg KH
2005-10-09 6:20 ` Ivan S. Dubrov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox