From: Ben Dooks <ben@fluff.org.uk>
To: Arthur Othieno <a.othieno@bluewin.ch>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] - create common header for init/main.c called init functions
Date: Wed, 19 Oct 2005 20:50:55 +0100 [thread overview]
Message-ID: <20051019195055.GC32720@home.fluff.org> (raw)
In-Reply-To: <20051018231109.GA15443@krypton>
[-- Attachment #1: Type: text/plain, Size: 1433 bytes --]
On Tue, Oct 18, 2005 at 07:11:09PM -0400, Arthur Othieno wrote:
> On Fri, Oct 14, 2005 at 01:42:10AM +0100, Ben Dooks wrote:
> > init/main.c calls a number of functions externally
> > but declaring them locally. This patch creates a
> > new header (linux/kernel_init.h) and moves all
> > the declarations into it.
>
> These functions are only referenced in init/main.c, and rightfully so.
> In the end, this doesn't change anything much, other than maintainance
> overhead for the new include/linux/kernel_init.h
>
> But, comments within..
>
> > Also removes any old init functions now done by
> > an initcall()
>
> (mca|sbus|tc)_init() removal look good.
>
> > Signed-off-by: Ben Dooks <ben-linux@fluff.org>
>
> > diff -urpN -X ../dontdiff linux-2.6.14-rc4-bjd3b/drivers/acpi/bus.c linux-2.6.14-rc4-bjd3c/drivers/acpi/bus.c
> > --- linux-2.6.14-rc4-bjd3b/drivers/acpi/bus.c 2005-10-11 10:56:31.000000000 +0100
> > +++ linux-2.6.14-rc4-bjd3c/drivers/acpi/bus.c 2005-10-14 01:32:27.000000000 +0100
> > @@ -30,6 +30,7 @@
> > #include <linux/pm.h>
> > #include <linux/device.h>
> > #include <linux/proc_fs.h>
> > +#include <linux/kernel_init.h>
I've attached a pair of patches, the first removes
the unused functions, and the second moves the init
function declarations into include/linux/init.h
(and adds the init to include/linux/prio_tree.h)
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
[-- Attachment #2: init-remove-unused.patch --]
[-- Type: text/plain, Size: 791 bytes --]
diff -urp -X linux-2.6.14-rc4-git7-bjd1/Documentation/dontdiff linux-2.6.14-rc4-git7/init/main.c linux-2.6.14-rc4-git7-bjd1/init/main.c
--- linux-2.6.14-rc4-git7/init/main.c 2005-10-19 12:44:36.000000000 +0100
+++ linux-2.6.14-rc4-git7-bjd1/init/main.c 2005-10-19 12:51:19.000000000 +0100
@@ -82,8 +82,6 @@ static int init(void *);
extern void init_IRQ(void);
extern void fork_init(unsigned long);
-extern void mca_init(void);
-extern void sbus_init(void);
extern void sysctl_init(void);
extern void signals_init(void);
extern void buffer_init(void);
@@ -101,10 +99,6 @@ extern void acpi_early_init(void);
static inline void acpi_early_init(void) { }
#endif
-#ifdef CONFIG_TC
-extern void tc_init(void);
-#endif
-
enum system_states system_state;
EXPORT_SYMBOL(system_state);
[-- Attachment #3: init-move-delarations.patch --]
[-- Type: text/plain, Size: 2790 bytes --]
diff -urp -X linux-2.6.14-rc4-git7-bjd1/Documentation/dontdiff linux-2.6.14-rc4-git7-bjd1/include/linux/init.h linux-2.6.14-rc4-git7-bjd2/include/linux/init.h
--- linux-2.6.14-rc4-git7-bjd1/include/linux/init.h 2005-08-29 00:41:01.000000000 +0100
+++ linux-2.6.14-rc4-git7-bjd2/include/linux/init.h 2005-10-19 14:15:20.000000000 +0100
@@ -143,6 +143,25 @@ struct obs_kernel_param {
/* Relies on saved_command_line being set */
void __init parse_early_param(void);
+
+/* items used by init/main.c */
+
+extern void __init init_IRQ(void);
+extern void __init fork_init(unsigned long);
+extern void __init sysctl_init(void);
+extern void __init signals_init(void);
+extern void __init buffer_init(void);
+extern void __init pidhash_init(void);
+extern void __init pidmap_init(void);
+extern void __init free_initmem(void);
+extern void __init populate_rootfs(void);
+extern void __init driver_init(void);
+extern void __init prepare_namespace(void);
+
+#ifdef CONFIG_ACPI
+extern void __init acpi_early_init(void);
+#endif
+
#endif /* __ASSEMBLY__ */
/**
diff -urp -X linux-2.6.14-rc4-git7-bjd1/Documentation/dontdiff linux-2.6.14-rc4-git7-bjd1/include/linux/prio_tree.h linux-2.6.14-rc4-git7-bjd2/include/linux/prio_tree.h
--- linux-2.6.14-rc4-git7-bjd1/include/linux/prio_tree.h 2005-08-29 00:41:01.000000000 +0100
+++ linux-2.6.14-rc4-git7-bjd2/include/linux/prio_tree.h 2005-10-19 13:31:41.000000000 +0100
@@ -117,4 +117,6 @@ struct prio_tree_node *prio_tree_next(st
#define raw_prio_tree_remove(root, node) \
prio_tree_remove(root, (struct prio_tree_node *) (node))
+extern void __init prio_tree_init(void);
+
#endif /* _LINUX_PRIO_TREE_H */
diff -urp -X linux-2.6.14-rc4-git7-bjd1/Documentation/dontdiff linux-2.6.14-rc4-git7-bjd1/init/main.c linux-2.6.14-rc4-git7-bjd2/init/main.c
--- linux-2.6.14-rc4-git7-bjd1/init/main.c 2005-10-19 12:51:19.000000000 +0100
+++ linux-2.6.14-rc4-git7-bjd2/init/main.c 2005-10-19 14:15:26.000000000 +0100
@@ -47,6 +47,8 @@
#include <linux/rmap.h>
#include <linux/mempolicy.h>
#include <linux/key.h>
+#include <linux/prio_tree.h>
+#include <linux/radix-tree.h>
#include <net/sock.h>
#include <asm/io.h>
@@ -80,22 +82,7 @@
static int init(void *);
-extern void init_IRQ(void);
-extern void fork_init(unsigned long);
-extern void sysctl_init(void);
-extern void signals_init(void);
-extern void buffer_init(void);
-extern void pidhash_init(void);
-extern void pidmap_init(void);
-extern void prio_tree_init(void);
-extern void radix_tree_init(void);
-extern void free_initmem(void);
-extern void populate_rootfs(void);
-extern void driver_init(void);
-extern void prepare_namespace(void);
-#ifdef CONFIG_ACPI
-extern void acpi_early_init(void);
-#else
+#ifndef CONFIG_ACPI
static inline void acpi_early_init(void) { }
#endif
prev parent reply other threads:[~2005-10-19 19:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-14 0:42 [PATCH] - create common header for init/main.c called init functions Ben Dooks
2005-10-18 23:11 ` Arthur Othieno
2005-10-18 23:44 ` Adrian Bunk
2005-10-19 6:30 ` Ben Dooks
2005-10-19 19:50 ` Ben Dooks [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051019195055.GC32720@home.fluff.org \
--to=ben@fluff.org.uk \
--cc=a.othieno@bluewin.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox