* 2.6.14-rc5-mm1
@ 2005-10-24 8:48 Andrew Morton
2005-10-24 9:28 ` 2.6.14-rc5-mm1 Magnus Damm
` (17 more replies)
0 siblings, 18 replies; 62+ messages in thread
From: Andrew Morton @ 2005-10-24 8:48 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
- At great personal cost I managed to coax most of the USB devel tree into
compiling and booting. We're hoping that the changes in here will improve
USB-related power management (suspend and resume). Please cc
linux-usb-devel@lists.sourceforge.net on any bug reports (or use bugzilla).
- Added git-blktrace.patch to the -mm lineup: Jens's block-layer tracing
infrastructure. It appears to be undocumented...
- Added git-block.patch to the -mm lineup: Jens's block tree
(drivers/block/*.c, basically).
- Added git-mips.patch to the -mm lineup: Ralf's MIPS development tree.
- Lots more core MM changes from Hugh: mainly to address page_table_lock SMP
scalability issuse. All this code is in place now (I think), so performance
testing time is here.
- Demand-paging for hugetlb pages. Needs very careful testing.
- Added Thomas's ktimer patch.
- A number of tty drivers still won't compile.
Changes since 2.6.14-rc4-mm1:
linus.patch
git-acpi.patch
git-agpgart.patch
git-blktrace.patch
git-block.patch
git-cifs.patch
git-cpufreq.patch
git-drm.patch
git-ia64.patch
git-audit.patch
git-jfs.patch
git-libata-all.patch
git-mips.patch
git-mtd.patch
git-netdev-all.patch
git-nfs.patch
git-ntfs.patch
git-ocfs2.patch
git-scsi-misc.patch
git-sas.patch
git-cryptodev.patch
Subsystem trees
-list-add-missing-rcu_dereference-on-first-element.patch
-ip6_tables-build-fix.patch
-svgatextmode-fix.patch
-fix-vpx3220-offset-issue-in-secam.patch
-fix-black-white-only-svideo-input-in-vpx3220.patch
-revert-orinoco-information-leakage-due-to-incorrect-padding.patch
-better-fixup-for-the-orinoco-driver.patch
-libata-build-fix.patch
-e1000_intr-build-fix.patch
-git-netedv-all-s2io-build-fix.patch
-git-netdev-all-e1000-fix.patch
-guarantee-dma-area-for-alloc_bootmem_low.patch
-mm-hugetlb-truncation-fixes.patch
-switch-sibyte-profiling-driver-to-compat_ioctl.patch
-switch-sibyte-profiling-driver-to-compat_ioctl-fix.patch
-fix-exit_itimers-vs-posix_timer_event-ab-ba-deadlock.patch
-shpchp-use-the-pci-core-for-hotplug-resource-management.patch
-shpchp-remove-redundant-display-of-pci-device-resources.patch
-shpchp-reduce-dependence-on-acpi.patch
-shpchp-detect-shpc-capability-before-doing-a-lot-of-work.patch
-shpchp-dont-save-pci-config-for-hotplug-slots-devices.patch
-shpchp-remove-redundant-data-structures.patch
-shpchp-miscellaneous-cleanups.patch
-shpchp-reduce-debug-message-verbosity.patch
-shpchp-fix-oops-at-driver-unload.patch
-au1100fb-use-preprocessor-instruction-for-error.patch
-cpufreq-kmalloc-memset-kzalloc-conversion.patch
-hwmon-kmalloc-memset-kzalloc-conversion.patch
-i2c-kmalloc-memset-kzalloc-conversion.patch
-kfree-cleanup-documentation.patch
Merged
+alpha-atomic-dependency-fix.patch
Alpha build fix
+git-acpi-build-fix-3.patch
Fix git-acpi.patch
+agp-performance-fixes.patch
+agp-updates-owner-field-of-struct-pci_driver.patch
AGP things
+nm256-reset-workaround-for-latitude-csx.patch
Sound driver fix
+gregkh-driver-class-device.h-documentation.patch
+gregkh-driver-input-register-class_device-sooner.patch
+gregkh-driver-input-input_dev_class-export.patch
+gregkh-driver-input-class_device-move.patch
+gregkh-driver-input_oops_fix.patch
+gregkh-driver-input-remove-input_class.patch
+gregkh-driver-input-rename-input_dev_class.patch
+gregkh-driver-input_backward_compatible_symlink.patch
+gregkh-driver-input-remove-custom-hotplug.patch
+gregkh-driver-drivers-base-fix-sparse-warnings.patch
+gregkh-driver-driver-core-big-kfree-null-check-cleanup-documentation.patch
Driver tree updates
+gregkh-i2c-i2c-owner-field-01-struct-pci-driver.patch
+gregkh-i2c-i2c-owner-field-02-struct-device-driver.patch
+gregkh-i2c-i2c-owner-field-03-i2c-keywest.patch
+gregkh-i2c-i2c-owner-field-04-i2c-core.patch
+gregkh-i2c-i2c-owner-field-05-i2c-isa.patch
+gregkh-i2c-hwmon-smsc47b397-new-id.patch
+gregkh-i2c-hwmon-missing-driver-class.patch
+gregkh-i2c-i2c-x1205.patch
+gregkh-i2c-kzalloc-01-i2c-ixp.patch
+gregkh-i2c-kzalloc-02-hwmon.patch
+gregkh-i2c-kzalloc-03-i2c-other.patch
+gregkh-i2c-kzalloc-04-drop-useless-casts.patch
+gregkh-i2c-kzalloc-05-i2c-amd756-s4882.patch
+gregkh-i2c-kzalloc-06-i2c-documentation-update.patch
I2C tree updates
+input-evdev-allow-querying-ev_sw-from-compat_ioctl.patch
+input-add-logitech-mx3100-to-logips2ppc.patch
Input tree updates
+git-netdev-all-ieee80211_tx-fix.patch
+git-netdev-all-ieee80211_get_payload-warning-fix.patch
+git-netdev-all-b44-build-fix.patch
Fixes for git-netdev-all.patch
+ntfs-printk-warning-fixes.patch
Warning fixes
+serial-remove-unneeded-code-from-serial_corec.patch
Serial driver cleanup
+gregkh-pci-shpc-01-shpc-use-pci-core.patch
+gregkh-pci-shpc-02-remove-redundant-res-display.patch
+gregkh-pci-shpc-03-reduce-acpi-dependence.patch
+gregkh-pci-shpc-04-probe-bail-early.patch
+gregkh-pci-shpc-05-dont-save-pci-configs.patch
+gregkh-pci-shpc-06-remove-redundant-data-structures.patch
+gregkh-pci-shpc-07--misc-cleanup.patch
+gregkh-pci-shpc-08-reduce-dbg-verbosity.patch
+gregkh-pci-shpc-09-remove-sysfs-files-on-unload.patch
+gregkh-pci-pci-fix-edac-drivers-for-radisys-82600-borkage.patch
+gregkh-pci-pci-fixup-pci-driver-shutdown.patch
+gregkh-pci-pci-convert-megaraid-to-use-pci_driver-shutdown-method.patch
+gregkh-pci-acpiphp-allocate-resources-for-adapters-with-bridges.patch
PCI tree updates
+scsi-remove-dead-code-from-src.patch
+scsi_error-thread-exits-in-task_interruptible-state.patch
+scsi-disk-report-size-without-overflow.patch
scsi fixes
+gregkh-usb-usb-pm-01.patch
+gregkh-usb-usb-pm-02.patch
+gregkh-usb-usb-pm-03.patch
+gregkh-usb-usb-pm-04.patch
+gregkh-usb-usb-pm-05.patch
+gregkh-usb-usb-pm-06.patch
+gregkh-usb-usb-pm-07.patch
+gregkh-usb-usb-pm-08.patch
+gregkh-usb-usb-pm-10.patch
+gregkh-usb-usb-pm-11.patch
+gregkh-usb-usb-pm-12.patch
+gregkh-usb-usb-pm-13.patch
+gregkh-usb-usb-rename-hcd-hub_suspend-to-hcd-bus_suspend.patch
+gregkh-usb-uhci-improve-handling-of-iso-tds.patch
+gregkh-usb-usb-storage-another-unusual_devs-entry.patch
+gregkh-usb-usb-buffer-overflow-patch-for-yealink-driver.patch
+gregkh-usb-usb-doc-fix-kernel-doc-warning.patch
+gregkh-usb-omap_udc-dma-off-by-one-fix.patch
+gregkh-usb-fix-hcd-state-assignments-in-uhci-hcd.patch
+gregkh-usb-add-usb-transceiver-set_suspend-method.patch
+gregkh-usb-usb-s3c2410-ohci-add-driver-owner-field.patch
+gregkh-usb-usb-gadget-drivers-add-.owner-initialisation.patch
+gregkh-usb-usb-add-owner-initialisation-to-host-drivers.patch
+gregkh-usb-missing-transfer_flags-setting-in-usbtest.patch
+gregkh-usb-usb-remove-devio-global.patch
+gregkh-usb-usb-notify-devices-and-busses.patch
+gregkh-usb-usb-use-notifier-devio.patch
+gregkh-usb-usb-use-notifier-inode.patch
+gregkh-usb-usb-use-notifier-usbmon.patch
+gregkh-usb-usb-patch-for-usbdevfs_ioctl-from-32-bit-programs.patch
+gregkh-usb-usb-remove-bluetty.patch
+gregkh-usb-usb-serial-driver-cleanup-01.patch
+gregkh-usb-usb-serial-driver-cleanup-02.patch
+gregkh-usb-usb-serial-driver-cleanup-03.patch
+gregkh-usb-usb-serial-driver-cleanup-04.patch
+gregkh-usb-usb-serial-driver-cleanup-05.patch
USB tree updates (gregkh-usb-usb-pm-09.patch breaks one of my machines)
+gregkh-usb-usb-rename-hcd-hub_suspend-to-hcd-bus_suspend-fix.patch
+gregkh-usb-usb-rename-hcd-hub_suspend-to-hcd-bus_suspend-config_pm-fix.patch
+gregkh-usb-usb-serial-driver-cleanup-01-fixes.patch
+gregkh-usb-usb-serial-driver-cleanup-04-fixes.patch
+gregkh-usb-usb-serial-driver-cleanup-04-keyspan-fixes.patch
+gregkh-usb-usb-patch-for-usbdevfs_ioctl-from-32-bit-programs-fix.patch
+gregkh-usb-usb-pm-04-fix.patch
+gregkh-usb-usb-pm-03-fix.patch
+export-usb_suspend_device.patch
All the fixes I had to do, dammit.
+x86_64-intel-multi-core.patch
+x86_64-intel-cache.patch
x86_64 tree updates
+clean-crypto-sha1c-up-a-bit.patch
crypto cleanup
+touchkit-ps-2-touchscreen-driver.patch
+touchkit-ps-2-touchscreen-driver-fixes.patch
New touchscreen driver
+mm-rss-=-file_rss-anon_rss-warning-fix.patch
Fix mm-rss-=-file_rss-anon_rss.patch
+core-remove-pagereserved-fix.patch
Fix core-remove-pagereserved.patch
+mm-i386-sh-sh64-ready-for-split-ptlock.patch
+mm-arm-ready-for-split-ptlock.patch
+mm-parisc-pte-atomicity.patch
+mm-cris-v32-mmu_context_lock.patch
+mm-uml-pte-atomicity.patch
+mm-uml-kill-unused.patch
+mm-split-page-table-lock.patch
+mm-split-page-table-lock-fixes.patch
+mm-split-page-table-lock-fixes-2.patch
+mm-split-page-table-lock-fixes-3.patch
+mm-fix-rss-and-mmlist-locking.patch
+mm-update-comments-to-pte-lock.patch
More core MM rework from Hugh.
+hugetlb-demand-fault-handler.patch
+hugetlb-overcommit-accounting-check.patch
+hugetlb-overcommit-accounting-check-fix.patch
Demand-paging for hugetlb pages
+mm-swap-prefetch-magnify.patch
Swap prefetching tuning
+mm-wider-use-of-for_each_cpu.patch
+mm-filemapcfilemap_populate-move-export.patch
mm cleanups
+net-wider-use-of-for_each_cpu.patch
+netlink-remove-dead-code-in-af_netlinkc.patch
+ipv4-remove-dead-code-from-ip_outputc.patch
+fix-behavior-of-ip6_route_input-for-link-local-address.patch
Net fixes
+3c59x-dont-enable-scatter-gather-w-o-checksum.patch
3Com net driver fix
+revert-orinoco-information-leakage-due-to-incorrect-padding.patch
+better-fixup-for-the-orinoco-driver.patch
Orinoco driver tweaks
+e1000-fixes-e1000_suspend-warning-when-config_pm-is-not.patch
Warning fix
+acx-update-2.patch
Update to the acx1xx wireless driver in -mm.
+selinux-remove-unecessary-size_t-checks-in-selinuxfs.patch
Cleanup
+ppc32-85xx-phy-platform-update.patch
+ppc32-ppc_sys-fixes-for-8xx-and-82xx.patch
ppc32 updates
+various-powerpc-32bit-ppc64-build-fixes.patch
+ppc64-reenable-make-install-with-defconfig.patch
+ppc64-change-name-of-target-file-during-make-install.patch
+ppc64-remove-duplicate-local-variable-in-set_preferred_console.patch
ppc64 updates
+i386-move-apic-init-in-init_irqs-fix.patch
Fix i386-move-apic-init-in-init_irqs.patch
+x86-inline-spin_unlock-if-not-config_debug_spinlock-and-not-config_preempt.patch
+x86-inline-spin_unlock_irq-if-not-config_debug_spinlock-and-not-config_preempt.patch
+allow-users-to-force-a-panic-on-nmi.patch
x86 tweaks
+wistron-laptop-button-driver.patch
+wistron-laptop-button-driver-x86_64-fix.patch
Little laptop button driver
+x86_64-two-timer-entries-in-sys.patch
Fix duplicated sysfs entry on x86_64
+sharp-sl-5500-touchscreen-support.patch
+support-pcmcia-slot-on-sharp-sl-5500.patch
Sharp SL driver work
+swsusp-reduce-the-use-of-global-variables.patch
+swsusp-remove-unneccessary-includes.patch
+swsusp-cleanups.patch
+swsusp-get-rid-of-unnecessary-wrapper-function.patch
+swsusp-two-simplifications.patch
swsusp stuff
+get-rid-of-the-obsolete-tri-level-suspend-resume-callbacks-tda9887-fix.patch
Fix get-rid-of-the-obsolete-tri-level-suspend-resume-callbacks.patch
+cpuset-remove-depth-counted-locking-hack.patch
+cpuset-dual-semaphore-locking-overhaul.patch
+cpuset-simple-rename.patch
+cpuset-confine-pdflush-to-its-cpuset.patch
cpusets updates
+keys-get-rid-of-warning-in-kmodc-if-keys-disabled.patch
key management warning fix
+setkeys-needs-root.patch
The setkeys command now requires elevated caps
+extable-remove-needless-declaration.patch
Cleanup
+modules-fix-sparse-warning-for-every-module_parm.patch
sparse fixes
+compat-fcntl-fixes.patch
Fix compat_fcntl()
+fix-nr_unused-accounting-and-avoid-recursing-in-iput-with-i_will_free-set.patch
Fix dcache accounting
+test-for-sb_getblk-return-value.patch
+test-for-sb_getblk-return-value-fixes.patch
Check for sb_getblk() errors.
+fix-vgacon-blanking.patch
Fix blanking on the VGA console
+ktimers-kt2.patch
+ktimers-kt2-gcc-295-fix.patch
+ktimers-kt2-sparc64-fix.patch
Kernel timer infrastructure
+epca-updates-owner-field-of-struct-pci_driver.patch
+synclink-adapters-updates-owner-field-of-struct-pci_driver.patch
+watchdog-update-owner-field-of-struct-pci_driver.patch
sysfs friendliness for a few drivers
+include-linux-kernelhbuild_bug_on-fix-a-comment.patch
Comment fix
+fs-attrc-remove-bug.patch
Removed redundant check
+rcu-torture-testing-kernel-module.patch
In-kernel testbed for the RCU core
+propogate-gfp_t-changes-further.patch
Warning fixes
+ib-add-idr_destroy-calls-on-module-unload.patch
Infiniband microleak fix
+posix-cpu-timers-fix-overrun-reporting.patch
Fix posix CPU timers
-edac-drivers-for-radisys-82600-gregkh-borkage.patch
Dropped
+edac-core-edac-support-code-fixes-2.patch
+edac-core-edac-support-code-fixes-3.patch
+edac-clean-up-atomic-stuff.patch
EDAC driver updates
+hpet-allow-hpet-fixed_mem32-resource-type.patch
+hpet-use-hpet-physical-addresses-for-dup.patch
+hpet-hpet-driver-cleanups.patch
HPET updates
+remove-duplicate-code-in-signalc.patch
Cleanup
+ipmi-use-refcount-in-message-handler.patch
+ipmi-various-si-cleanup.patch
+ipmi-watchdog-parms-in-sysfs.patch
+ipmi-poweroff-cleanups.patch
+ipmi-more-dell-fixes.patch
+ipmi-si-start-transaction-hook.patch
+ipmi-bt-restart-reset-fixes.patch
+ipmi-kcs-error0-delay.patch
+ipmi-add-timer-thread.patch
IPMI updates
+udf-fix-issues-reported-by-coverity-in-inodec.patch
+udf-fix-issues-reported-by-coverity-in-nameic.patch
+ipmi-fix-issues-reported-by-coverity-in-ipmi_msghandlerc.patch
+kernel-modulec-removed-dead-code.patch
Fix a few things from the Coverity checker
+dvb-usb-urb-printk-fix.patch
Warning fix
-deprecate-openfoo-3.patch
Dropped (it got a reject and I'm not really convinced about it)
+reiser4-page-private-fixes.patch
Update reiser4 for mm changes.
+serial-new-hp-diva-console-port.patch
Serial driver update
+rocketpoint-1520-fails-clock-stabilization-fix.patch
Fix rocketpoint-1520-fails-clock-stabilization.patch
+ide-explain-the-pci-bus-test.patch
Comment update
+nvidiafb-fix-mode-setting-ppc-support-fix.patch
Fix nvidiafb-fix-mode-setting-ppc-support.patch
+fbcon-fbdev-move-softcursor-out-of-fbdev-to-fbcon.patch
+fbcon-consolidate-redundant-code.patch
+fbcon-use-helper-function-when-filling-out-var-structure.patch
+fbcon-initialize-new-driver-when-old-driver-is-released.patch
+fbdev-remove-software-clipping-from-drawing.patch
+vesafb-fix-color-palette-handling.patch
+atyfb-get-initial-mode-timings-from-lcd-bios.patch
+savagefb-convert-from-vga-io-access-to-mmio-access.patch
+pm2fb-manual-configuration-of-timings-for-elsa-winner.patch
+fbdev-workaround-for-buggy-edid-blocks.patch
+nvidiafb-fix-empty-macro.patch
+fbdev-fix-the-fb_find_nearest_mode-function.patch
+s3c2410fb-initialise-device_driver-owner.patch
+vesafb-disable-mtrr-as-the-default.patch
+i810fb-cleanup-i2c-code.patch
+console-fix-compile-error.patch
+fbcon-add-rl-roman-large-font.patch
fbdev updates
+doc-hpettxt-change-to-80-columns.patch
+more-kernel-doc-cleanups-additions.patch
kerneldoc updates
+serial-disable-jsm-in-ppc64-defconfig.patch
Disable one currently-broken tty driver in defconfig
+isicom-pci-probing-added-fix.patch
Fix isicom-pci-probing-added.patch
All 1059 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/patch-list
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
@ 2005-10-24 9:28 ` Magnus Damm
2005-10-24 9:34 ` 2.6.14-rc5-mm1 Benoit Boissinot
` (16 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Magnus Damm @ 2005-10-24 9:28 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew,
Could you please consider including the following in your -mm tree?
srat fix on i386, simple fix - no interest.
http://lkml.org/lkml/2005/9/16/14
cpusets on non-smp hardware, acked by Paul Jackson.
http://lkml.org/lkml/2005/10/3/48
Both applies on top of 2.6.14-rc5-mm1.
Many thanks,
/ magnus
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
2005-10-24 9:28 ` 2.6.14-rc5-mm1 Magnus Damm
@ 2005-10-24 9:34 ` Benoit Boissinot
2005-10-24 12:23 ` 2.6.14-rc5-mm1 Jens Axboe
` (15 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Benoit Boissinot @ 2005-10-24 9:34 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Ingo Molnar
On 10/24/05, Andrew Morton <akpm@osdl.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
>
> +x86-inline-spin_unlock-if-not-config_debug_spinlock-and-not-config_preempt.patch
> +x86-inline-spin_unlock_irq-if-not-config_debug_spinlock-and-not-config_preempt.patch
>
> x86 tweaks
>
those two breaks on UP since the lock can be NULL and it deferences it.
regards,
Benoit
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
2005-10-24 9:28 ` 2.6.14-rc5-mm1 Magnus Damm
2005-10-24 9:34 ` 2.6.14-rc5-mm1 Benoit Boissinot
@ 2005-10-24 12:23 ` Jens Axboe
2005-10-24 14:09 ` 2.6.14-rc5-mm1 Jasper Spaans
` (14 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Jens Axboe @ 2005-10-24 12:23 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Mon, Oct 24 2005, Andrew Morton wrote:
> - Added git-blktrace.patch to the -mm lineup: Jens's block-layer tracing
> infrastructure. It appears to be undocumented...
If 20 pages of pdf documentation is undocumented, then we've raised the
bar a lot when it comes to documentation :-)
If you pull the blktrace tools, there's a README in there and if you
do a make docs it will generate a users manual for you.
I will update the in-kernel documentation, it does need a little work in
the Kconfig section. And I'll add a pointer to the user tool repo which
has a lot more info.
--
Jens Axboe
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (2 preceding siblings ...)
2005-10-24 12:23 ` 2.6.14-rc5-mm1 Jens Axboe
@ 2005-10-24 14:09 ` Jasper Spaans
2005-10-24 15:40 ` 2.6.14-rc5-mm1 Badari Pulavarty
` (13 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Jasper Spaans @ 2005-10-24 14:09 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hiya,
On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
> +clean-crypto-sha1c-up-a-bit.patch
>
> crypto cleanup
It seems this one breaks sha1 (on my AMD Sempron); quoting dmesg:
testing sha1
test 1:
9c80d0f72a11fe6f3919c20ced200a71ea6a9a93
fail
test 2:
ac94a4c354401d31f6642a6d53fe732c0cdca39a
fail
testing sha1 across pages
test 1:
ac94a4c354401d31f6642a6d53fe732c0cdca39a
fail
Cheers,
--
Jasper Spaans http://jsp.vs19.net/
16:03:17 up 10477 days, 6:50, 0 users, load average: 5.00 5.19 6.10
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (3 preceding siblings ...)
2005-10-24 14:09 ` 2.6.14-rc5-mm1 Jasper Spaans
@ 2005-10-24 15:40 ` Badari Pulavarty
2005-10-24 15:43 ` 2.6.14-rc5-mm1 Adrian Bunk
2005-10-24 16:06 ` 2.6.14-rc5-mm1 Yoichi Yuasa
` (12 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Badari Pulavarty @ 2005-10-24 15:40 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml, alan
On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
Compile problems.
Thanks,
Badari
elm3b29:/usr/src/linux-2.6.14-rc5 # make -j40 modules
CHK include/linux/version.h
CC [M] drivers/serial/jsm/jsm_tty.o
drivers/serial/jsm/jsm_tty.c: In function `jsm_input':
drivers/serial/jsm/jsm_tty.c:592: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:619: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:620: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:623: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:624: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:667: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:668: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:669: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:670: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:671: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:672: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:674: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:677: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:680: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:681: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:682: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:691: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:692: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:693: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:694: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:695: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:696: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:698: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:701: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:742: error: structure has no member named
`flip'
drivers/serial/jsm/jsm_tty.c:742: error: structure has no member named
`flip'
make[3]: *** [drivers/serial/jsm/jsm_tty.o] Error 1
make[2]: *** [drivers/serial/jsm] Error 2
make[1]: *** [drivers/serial] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 15:40 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-24 15:43 ` Adrian Bunk
2005-10-24 17:21 ` 2.6.14-rc5-mm1 Alan Cox
0 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-10-24 15:43 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: Andrew Morton, lkml, alan
On Mon, Oct 24, 2005 at 08:40:34AM -0700, Badari Pulavarty wrote:
> On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
> Compile problems.
>
> Thanks,
> Badari
>
> elm3b29:/usr/src/linux-2.6.14-rc5 # make -j40 modules
> CHK include/linux/version.h
> CC [M] drivers/serial/jsm/jsm_tty.o
> drivers/serial/jsm/jsm_tty.c: In function `jsm_input':
> drivers/serial/jsm/jsm_tty.c:592: error: structure has no member named
> `flip'
>...
Quoting Andrew's announcement:
- A number of tty drivers still won't compile.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (4 preceding siblings ...)
2005-10-24 15:40 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-24 16:06 ` Yoichi Yuasa
2005-10-24 17:51 ` 2.6.14-rc5-mm1 Lexington Luthor
` (11 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Yoichi Yuasa @ 2005-10-24 16:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: yuasa, linux-kernel
Hi Andrew,
On Mon, 24 Oct 2005 01:48:38 -0700
Andrew Morton <akpm@osdl.org> wrote:
>
> - Added git-mips.patch to the -mm lineup: Ralf's MIPS development tree.
This patch thrust back vr41xx to old Kconfig.
Also tb0287_config has been removed.
Please apply this patch.
Yoichi
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
diff -Npru -X dontdiff mm1-orig/arch/mips/Kconfig mm1/arch/mips/Kconfig
--- mm1-orig/arch/mips/Kconfig 2005-10-25 00:35:48.000000000 +0900
+++ mm1/arch/mips/Kconfig 2005-10-24 23:57:54.000000000 +0900
@@ -458,7 +458,9 @@ config DDB5477
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "Support for NEC VR41XX-based machines"
+ bool "Support for NEC VR4100 series based machines"
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
bool "Support for PMC-Sierra Yosemite eval board"
@@ -937,9 +939,6 @@ config MIPS_L1_CACHE_SHIFT
config HAVE_STD_PC_SERIAL_PORT
bool
-config VR4181
- bool
-
config ARC_CONSOLE
bool "ARC console support"
depends on SGI_IP22 || SNI_RM200_PCI
@@ -1044,7 +1043,7 @@ config CPU_VR41XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
help
- The options selects support for the NEC VR41xx series of processors.
+ The options selects support for the NEC VR4100 series of processors.
Only choose this option if you have one of these processors as a
kernel built with this option will not run on any other type of
processor or vice versa.
diff -Npru -X dontdiff mm1-orig/arch/mips/configs/tb0287_defconfig mm1/arch/mips/configs/tb0287_defconfig
--- mm1-orig/arch/mips/configs/tb0287_defconfig 1970-01-01 09:00:00.000000000 +0900
+++ mm1/arch/mips/configs/tb0287_defconfig 2005-10-25 01:00:14.000000000 +0900
@@ -0,0 +1,1105 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-mm1
+# Tue Oct 25 00:20:22 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_CMP=m
+CONFIG_IEEE1394_AMDTP=m
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_KGDBOE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_GOTEMP is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+# CONFIG_EDAC is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISER4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+# CONFIG_XFS_SECURITY is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_QUOTACTL=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
diff -Npru -X dontdiff mm1-orig/arch/mips/vr41xx/Kconfig mm1/arch/mips/vr41xx/Kconfig
--- mm1-orig/arch/mips/vr41xx/Kconfig 2005-10-25 00:35:48.000000000 +0900
+++ mm1/arch/mips/vr41xx/Kconfig 2005-10-25 00:09:44.000000000 +0900
@@ -1,31 +1,9 @@
-config NEC_CMBVR4133
- bool "Support for NEC CMB-VR4133"
- depends on MACH_VR41XX
- select CPU_VR41XX
- select DMA_NONCOHERENT
- select IRQ_CPU
- select HW_HAS_PCI
- select PCI_VR41XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config ROCKHOPPER
- bool "Support for Rockhopper baseboard"
- depends on NEC_CMBVR4133
- select I8259
- select HAVE_STD_PC_SERIAL_PORT
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
config CASIO_E55
bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
depends on MACH_VR41XX
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
config IBM_WORKPAD
@@ -34,34 +12,52 @@ config IBM_WORKPAD
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+config NEC_CMBVR4133
+ bool "Support for NEC CMB-VR4133"
+ depends on MACH_VR41XX
+ select CPU_VR41XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select HW_HAS_PCI
+
+config ROCKHOPPER
+ bool "Support for Rockhopper baseboard"
+ depends on NEC_CMBVR4133
+ select I8259
+ select HAVE_STD_PC_SERIAL_PORT
+
config TANBAC_TB022X
- bool "Support for TANBAC TB0225 (VR4131 multichip module) and TB0229 (VR4131DIMM)"
+ bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
depends on MACH_VR41XX
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
help
- The TANBAC TB0225 (VR4131 multichip module) and TB0229 (VR4131DIMM)
- are MIPS-based platforms manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about
- VR4131 Multi-chip module and VR4131DIMM.
+ The TANBAC VR4131 multichip module(TB0225) and
+ the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/>
+ about VR4131 multichip module and VR4131DIMM.
config TANBAC_TB0226
- bool "Support for TANBAC TB0226 (Mbase)"
+ bool "Support for TANBAC Mbase(TB0226)"
depends on TANBAC_TB022X
- select PCI
- select PCI_VR41XX
select GPIO_VR41XX
help
- The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by
- TANBAC. Please refer to <http://www.tanbac.co.jp/> about Mbase.
+ The TANBAC Mbase(TB0226) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
+
+config TANBAC_TB0287
+ bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
+ depends on TANBAC_TB022X
+ help
+ The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
config VICTOR_MPC30X
bool "Support for Victor MP-C303/304"
@@ -69,10 +65,7 @@ config VICTOR_MPC30X
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
- depends on MACH_VR41XX
config ZAO_CAPCELLA
bool "Support for ZAO Networks Capcella"
@@ -80,13 +73,13 @@ config ZAO_CAPCELLA
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && PCI
+ depends on MACH_VR41XX && HW_HAS_PCI
+ default y
+ select PCI
config VRC4173
tristate "Add NEC VRC4173 companion chip support"
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 15:43 ` 2.6.14-rc5-mm1 Adrian Bunk
@ 2005-10-24 17:21 ` Alan Cox
2005-10-25 9:54 ` 2.6.14-rc5-mm1 Adrian Bunk
0 siblings, 1 reply; 62+ messages in thread
From: Alan Cox @ 2005-10-24 17:21 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Badari Pulavarty, Andrew Morton, lkml
On Llu, 2005-10-24 at 17:43 +0200, Adrian Bunk wrote:
> > CC [M] drivers/serial/jsm/jsm_tty.o
> > drivers/serial/jsm/jsm_tty.c: In function `jsm_input':
> > drivers/serial/jsm/jsm_tty.c:592: error: structure has no member named
> > `flip'
> >...
>
> Quoting Andrew's announcement:
>
> - A number of tty drivers still won't compile.
Should only be jsm that won't compile for any mainstream platform, if
you find others that don't please email me.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (5 preceding siblings ...)
2005-10-24 16:06 ` 2.6.14-rc5-mm1 Yoichi Yuasa
@ 2005-10-24 17:51 ` Lexington Luthor
2005-10-24 19:05 ` 2.6.14-rc5-mm1 Benoit Boissinot
2005-10-24 20:48 ` 2.6.14-rc5-mm1 Badari Pulavarty
` (10 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Lexington Luthor @ 2005-10-24 17:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
> - At great personal cost I managed to coax most of the USB devel tree into
> compiling and booting. We're hoping that the changes in here will improve
> USB-related power management (suspend and resume). Please cc
> linux-usb-devel@lists.sourceforge.net on any bug reports (or use bugzilla).
>
> - Added git-blktrace.patch to the -mm lineup: Jens's block-layer tracing
> infrastructure. It appears to be undocumented...
>
> - Added git-block.patch to the -mm lineup: Jens's block tree
> (drivers/block/*.c, basically).
>
> - Added git-mips.patch to the -mm lineup: Ralf's MIPS development tree.
>
> - Lots more core MM changes from Hugh: mainly to address page_table_lock SMP
> scalability issuse. All this code is in place now (I think), so performance
> testing time is here.
>
> - Demand-paging for hugetlb pages. Needs very careful testing.
>
> - Added Thomas's ktimer patch.
>
> - A number of tty drivers still won't compile.
>
(Second try at sending this message. The first one got eaten by the
gmane server. Apologies for the noise if you receive this twice.)
Hi,
This release has a number of build errors for me. I used the vanilla
2.6.14-rc5 + 2.6.14-rc5-mm1 patch + CK's 1GB lowmem patch.
Here is the make output and the .config listing:
$ make
CHK include/linux/version.h
UPD include/linux/version.h
SYMLINK include/asm -> include/asm-i386
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/i386/kernel/asm-offsets.s
GEN include/asm-i386/asm-offsets.h
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
HOSTCC scripts/conmakehash
CC init/main.o
In file included from init/main.c:50:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
CC init/do_mounts.o
LD init/mounts.o
CC init/initramfs.o
CC init/calibrate.o
LD init/built-in.o
HOSTCC usr/gen_init_cpio
CHK usr/initramfs_list
UPD usr/initramfs_list
CPIO usr/initramfs_data.cpio
GZIP usr/initramfs_data.cpio.gz
AS usr/initramfs_data.o
LD usr/built-in.o
CC arch/i386/kernel/process.o
CC arch/i386/kernel/semaphore.o
CC arch/i386/kernel/signal.o
AS arch/i386/kernel/entry.o
CC arch/i386/kernel/traps.o
CC arch/i386/kernel/irq.o
CC arch/i386/kernel/vm86.o
CC arch/i386/kernel/ptrace.o
arch/i386/kernel/ptrace.c: In function `sys_ptrace':
arch/i386/kernel/ptrace.c:383: warning: implicit declaration of function
`__raw_read_unlock'
CC arch/i386/kernel/time.o
CC arch/i386/kernel/ioport.o
CC arch/i386/kernel/ldt.o
CC arch/i386/kernel/setup.o
CC arch/i386/kernel/i8259.o
CC arch/i386/kernel/sys_i386.o
CC arch/i386/kernel/pci-dma.o
CC arch/i386/kernel/i386_ksyms.o
CC arch/i386/kernel/i387.o
CC arch/i386/kernel/dmi_scan.o
CC arch/i386/kernel/bootflag.o
CC arch/i386/kernel/doublefault.o
CC arch/i386/kernel/quirks.o
CC arch/i386/kernel/i8237.o
CC arch/i386/kernel/cpu/common.o
CC arch/i386/kernel/cpu/proc.o
CC arch/i386/kernel/cpu/amd.o
CC arch/i386/kernel/cpu/cyrix.o
CC arch/i386/kernel/cpu/centaur.o
CC arch/i386/kernel/cpu/transmeta.o
CC arch/i386/kernel/cpu/intel.o
CC arch/i386/kernel/cpu/intel_cacheinfo.o
CC arch/i386/kernel/cpu/rise.o
CC arch/i386/kernel/cpu/nexgen.o
CC arch/i386/kernel/cpu/umc.o
CC arch/i386/kernel/cpu/mcheck/mce.o
CC arch/i386/kernel/cpu/mcheck/k7.o
CC arch/i386/kernel/cpu/mcheck/p4.o
CC arch/i386/kernel/cpu/mcheck/p5.o
CC arch/i386/kernel/cpu/mcheck/p6.o
CC arch/i386/kernel/cpu/mcheck/winchip.o
CC arch/i386/kernel/cpu/mcheck/non-fatal.o
LD arch/i386/kernel/cpu/mcheck/built-in.o
CC arch/i386/kernel/cpu/mtrr/main.o
CC arch/i386/kernel/cpu/mtrr/if.o
CC arch/i386/kernel/cpu/mtrr/generic.o
CC arch/i386/kernel/cpu/mtrr/state.o
CC arch/i386/kernel/cpu/mtrr/amd.o
CC arch/i386/kernel/cpu/mtrr/cyrix.o
CC arch/i386/kernel/cpu/mtrr/centaur.o
LD arch/i386/kernel/cpu/mtrr/built-in.o
LD arch/i386/kernel/cpu/built-in.o
CC arch/i386/kernel/timers/timer.o
CC arch/i386/kernel/timers/timer_none.o
CC arch/i386/kernel/timers/timer_tsc.o
CC arch/i386/kernel/timers/timer_pit.o
CC arch/i386/kernel/timers/common.o
CC arch/i386/kernel/timers/timer_hpet.o
LD arch/i386/kernel/timers/built-in.o
CC arch/i386/kernel/reboot.o
CC arch/i386/kernel/apm.o
arch/i386/kernel/apm.c: In function `suspend':
arch/i386/kernel/apm.c:1186: warning: `pm_send_all' is deprecated
(declared at include/linux/pm.h:122)
arch/i386/kernel/apm.c:1240: warning: `pm_send_all' is deprecated
(declared at include/linux/pm.h:122)
arch/i386/kernel/apm.c: In function `check_events':
arch/i386/kernel/apm.c:1361: warning: `pm_send_all' is deprecated
(declared at include/linux/pm.h:122)
CC arch/i386/kernel/mpparse.o
CC arch/i386/kernel/apic.o
CC arch/i386/kernel/nmi.o
CC arch/i386/kernel/io_apic.o
CC arch/i386/kernel/module.o
CC arch/i386/kernel/sysenter.o
LDS arch/i386/kernel/vsyscall.lds
AS arch/i386/kernel/vsyscall-int80.o
AS arch/i386/kernel/vsyscall-note.o
SYSCALL arch/i386/kernel/vsyscall-int80.so
AS arch/i386/kernel/vsyscall-sysenter.o
SYSCALL arch/i386/kernel/vsyscall-sysenter.so
AS arch/i386/kernel/vsyscall.o
CC arch/i386/kernel/time_hpet.o
CC arch/i386/kernel/early_printk.o
SYSCALL arch/i386/kernel/vsyscall-syms.o
LD arch/i386/kernel/built-in.o
AS arch/i386/kernel/head.o
CC arch/i386/kernel/init_task.o
LDS arch/i386/kernel/vmlinux.lds
CC arch/i386/mm/init.o
CC arch/i386/mm/pgtable.o
CC arch/i386/mm/fault.o
CC arch/i386/mm/ioremap.o
arch/i386/mm/ioremap.c: In function `iounmap':
arch/i386/mm/ioremap.c:257: warning: implicit declaration of function
`__raw_write_unlock'
CC arch/i386/mm/extable.o
CC arch/i386/mm/pageattr.o
CC arch/i386/mm/mmap.o
LD arch/i386/mm/built-in.o
CC arch/i386/mach-default/setup.o
CC arch/i386/mach-default/topology.o
LD arch/i386/mach-default/built-in.o
LD arch/i386/crypto/built-in.o
CC kernel/sched.o
kernel/sched.c: In function `do_sched_setscheduler':
kernel/sched.c:3805: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/fork.o
kernel/fork.c: In function `__copy_fs_struct':
kernel/fork.c:542: warning: implicit declaration of function
`__raw_read_unlock'
kernel/fork.c: In function `copy_process':
kernel/fork.c:1070: warning: implicit declaration of function
`__raw_write_unlock'
CC kernel/exec_domain.o
kernel/exec_domain.c: In function `lookup_exec_domain':
kernel/exec_domain.c:70: warning: implicit declaration of function
`__raw_read_unlock'
kernel/exec_domain.c: In function `register_exec_domain':
kernel/exec_domain.c:110: warning: implicit declaration of function
`__raw_write_unlock'
CC kernel/panic.o
CC kernel/printk.o
CC kernel/profile.o
CC kernel/exit.o
kernel/exit.c: In function `release_task':
kernel/exit.c:104: warning: implicit declaration of function
`__raw_write_unlock'
kernel/exit.c: In function `session_of_pgrp':
kernel/exit.c:151: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/itimer.o
kernel/itimer.c: In function `do_getitimer':
kernel/itimer.c:78: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/time.o
CC kernel/softirq.o
CC kernel/resource.o
kernel/resource.c: In function `r_stop':
kernel/resource.c:73: warning: implicit declaration of function
`__raw_read_unlock'
kernel/resource.c: In function `request_resource':
kernel/resource.c:207: warning: implicit declaration of function
`__raw_write_unlock'
CC kernel/sysctl.o
CC kernel/capability.o
kernel/capability.c: In function `sys_capget':
kernel/capability.c:81: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/ptrace.o
kernel/ptrace.c: In function `ptrace_check_attach':
kernel/ptrace.c:114: warning: implicit declaration of function
`__raw_read_unlock'
kernel/ptrace.c: In function `ptrace_attach':
kernel/ptrace.c:176: warning: implicit declaration of function
`__raw_write_unlock'
CC kernel/timer.o
CC kernel/user.o
CC kernel/signal.o
kernel/signal.c: In function `exit_sighand':
kernel/signal.c:339: warning: implicit declaration of function
`__raw_write_unlock'
kernel/signal.c: In function `kill_pg_info':
kernel/signal.c:1137: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/sys.o
kernel/sys.c: In function `notifier_chain_register':
kernel/sys.c:119: warning: implicit declaration of function
`__raw_write_unlock'
kernel/sys.c: In function `sys_setpriority':
kernel/sys.c:298: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/kmod.o
CC kernel/workqueue.o
kernel/workqueue.c: In function `current_is_keventd':
kernel/workqueue.c:460: warning: unused variable `cpu'
CC kernel/pid.o
CC kernel/rcupdate.o
CC kernel/intermodule.o
kernel/intermodule.c:178: warning: `inter_module_register' is deprecated
(declared at kernel/intermodule.c:38)
kernel/intermodule.c:179: warning: `inter_module_unregister' is
deprecated (declared at kernel/intermodule.c:78)
kernel/intermodule.c:181: warning: `inter_module_put' is deprecated
(declared at kernel/intermodule.c:159)
CC kernel/extable.o
CC kernel/params.o
CC kernel/posix-timers.o
kernel/posix-timers.c: In function `sys_timer_create':
kernel/posix-timers.c:546: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/kthread.o
CC kernel/wait.o
CC kernel/kfifo.o
CC kernel/sys_ni.o
CC kernel/posix-cpu-timers.o
kernel/posix-cpu-timers.c: In function `check_clock':
kernel/posix-cpu-timers.c:28: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/ktimers.o
CC kernel/futex.o
CC kernel/dma.o
CC kernel/uid16.o
CC kernel/module.o
CC kernel/irq/handle.o
CC kernel/irq/manage.o
CC kernel/irq/spurious.o
CC kernel/irq/autoprobe.o
CC kernel/irq/proc.o
LD kernel/irq/built-in.o
CC kernel/power/main.o
CC kernel/power/process.o
kernel/power/process.c: In function `freeze_processes':
kernel/power/process.c:82: warning: implicit declaration of function
`__raw_read_unlock'
CC kernel/power/console.o
CC kernel/power/pm.o
kernel/power/pm.c:258: warning: `pm_register' is deprecated (declared at
kernel/power/pm.c:62)
kernel/power/pm.c:259: warning: `pm_unregister' is deprecated (declared
at kernel/power/pm.c:85)
kernel/power/pm.c:260: warning: `pm_unregister_all' is deprecated
(declared at kernel/power/pm.c:114)
kernel/power/pm.c:261: warning: `pm_send_all' is deprecated (declared at
kernel/power/pm.c:233)
LD kernel/power/built-in.o
CC kernel/ksysfs.o
CC kernel/seccomp.o
LD kernel/built-in.o
CC mm/bootmem.o
CC mm/filemap.o
mm/filemap.c: In function `remove_from_page_cache':
mm/filemap.c:130: warning: implicit declaration of function
`__raw_write_unlock'
mm/filemap.c: In function `find_get_page':
mm/filemap.c:532: warning: implicit declaration of function
`__raw_read_unlock'
CC mm/mempool.o
CC mm/oom_kill.o
mm/oom_kill.c: In function `out_of_memory':
mm/oom_kill.c:286: warning: implicit declaration of function
`__raw_read_unlock'
CC mm/fadvise.o
CC mm/page_alloc.o
CC mm/page-writeback.o
mm/page-writeback.c: In function `__set_page_dirty_nobuffers':
mm/page-writeback.c:633: warning: implicit declaration of function
`__raw_write_unlock'
CC mm/pdflush.o
CC mm/readahead.o
mm/readahead.c: In function `__do_page_cache_readahead':
mm/readahead.c:287: warning: implicit declaration of function
`__raw_read_unlock'
CC mm/slab.o
CC mm/swap.o
CC mm/truncate.o
mm/truncate.c: In function `invalidate_complete_page':
mm/truncate.c:79: warning: implicit declaration of function
`__raw_write_unlock'
CC mm/vmscan.o
mm/vmscan.c: In function `shrink_list':
mm/vmscan.c:532: warning: implicit declaration of function
`__raw_write_unlock'
CC mm/prio_tree.o
CC mm/fremap.o
CC mm/highmem.o
CC mm/madvise.o
CC mm/memory.o
CC mm/mincore.o
CC mm/mlock.o
CC mm/mmap.o
CC mm/mprotect.o
CC mm/mremap.o
CC mm/msync.o
CC mm/rmap.o
CC mm/vmalloc.o
mm/vmalloc.c: In function `__get_vm_area_node':
mm/vmalloc.c:221: warning: implicit declaration of function
`__raw_write_unlock'
mm/vmalloc.c: In function `vread':
mm/vmalloc.c:594: warning: implicit declaration of function
`__raw_read_unlock'
CC mm/page_io.o
CC mm/swap_state.o
mm/swap_state.c: In function `__add_to_swap_cache':
mm/swap_state.c:90: warning: implicit declaration of function
`__raw_write_unlock'
CC mm/swapfile.o
mm/swapfile.c: In function `remove_exclusive_swap_page':
mm/swapfile.c:355: warning: implicit declaration of function
`__raw_write_unlock'
CC mm/thrash.o
CC mm/swap_prefetch.o
mm/swap_prefetch.c: In function `trickle_swap_cache_async':
mm/swap_prefetch.c:232: warning: implicit declaration of function
`__raw_read_unlock'
CC mm/shmem.o
LD mm/built-in.o
CC fs/open.o
CC fs/read_write.o
CC fs/file_table.o
CC fs/buffer.o
fs/buffer.c: In function `__set_page_dirty_buffers':
fs/buffer.c:871: warning: implicit declaration of function
`__raw_write_unlock'
CC fs/bio.o
CC fs/super.o
CC fs/block_dev.o
CC fs/char_dev.o
CC fs/stat.o
CC fs/exec.o
fs/exec.c: In function `register_binfmt':
fs/exec.c:80: warning: implicit declaration of function `__raw_write_unlock'
fs/exec.c: In function `sys_uselib':
fs/exec.c:156: warning: implicit declaration of function `__raw_read_unlock'
CC fs/pipe.o
CC fs/namei.o
fs/namei.c: In function `walk_init_root':
fs/namei.c:463: warning: implicit declaration of function
`__raw_read_unlock'
fs/namei.c: In function `set_fs_altroot':
fs/namei.c:1026: warning: implicit declaration of function
`__raw_write_unlock'
CC fs/fcntl.o
fs/fcntl.c: In function `f_modown':
fs/fcntl.c:259: warning: implicit declaration of function
`__raw_write_unlock'
fs/fcntl.c: In function `send_sigio':
fs/fcntl.c:489: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/ioctl.o
CC fs/readdir.o
CC fs/select.o
CC fs/fifo.o
CC fs/locks.o
CC fs/dcache.o
fs/dcache.c: In function `d_path':
fs/dcache.c:1601: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/inode.o
CC fs/attr.o
CC fs/bad_inode.o
CC fs/file.o
CC fs/filesystems.o
fs/filesystems.c: In function `register_filesystem':
fs/filesystems.c:83: warning: implicit declaration of function
`__raw_write_unlock'
fs/filesystems.c: In function `fs_index':
fs/filesystems.c:141: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/namespace.o
fs/namespace.c: In function `set_fs_root':
fs/namespace.c:1210: warning: implicit declaration of function
`__raw_write_unlock'
fs/namespace.c: In function `chroot_fs_refs':
fs/namespace.c:1260: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/aio.o
fs/aio.c: In function `ioctx_alloc':
fs/aio.c:244: warning: implicit declaration of function `__raw_write_unlock'
fs/aio.c: In function `lookup_ioctx':
fs/aio.c:545: warning: implicit declaration of function `__raw_read_unlock'
CC fs/seq_file.o
CC fs/xattr.o
CC fs/libfs.o
CC fs/fs-writeback.o
CC fs/mpage.o
CC fs/direct-io.o
CC fs/ioprio.o
fs/ioprio.c: In function `sys_ioprio_set':
fs/ioprio.c:116: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/eventpoll.o
CC fs/nfsctl.o
CC fs/binfmt_script.o
CC fs/binfmt_elf.o
fs/binfmt_elf.c: In function `elf_core_dump':
fs/binfmt_elf.c:1459: warning: implicit declaration of function
`__raw_read_unlock'
LD fs/cifs/built-in.o
CC [M] fs/cifs/cifsfs.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifsfs.c:36:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
fs/cifs/cifsfs.c: At top level:
fs/cifs/cifsfs.c:409: warning: 'cifs_umount_begin' defined but not used
CC [M] fs/cifs/cifssmb.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifssmb.c:35:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/cifs_debug.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifs_debug.c:28:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/connect.o
In file included from include/linux/tcp.h:180,
from include/linux/ipv6.h:177,
from fs/cifs/connect.c:26:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/dir.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/dir.c:28:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/file.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/file.c:35:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/inode.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/inode.c:27:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/link.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/link.c:25:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/misc.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/misc.c:25:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/netmisc.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/netmisc.c:34:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/smbdes.o
CC [M] fs/cifs/smbencrypt.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/smbencrypt.c:32:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/transport.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/transport.c:30:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/asn1.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/asn1.c:26:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/md4.o
CC [M] fs/cifs/md5.o
CC [M] fs/cifs/cifs_unicode.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifs_unicode.c:24:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/nterr.o
CC [M] fs/cifs/xattr.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/xattr.c:25:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/cifsencrypt.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifsencrypt.c:23:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/fcntl.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/cifsglob.h:56,
from fs/cifs/fcntl.c:26:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/readdir.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/readdir.c:26:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/cifs/ioctl.o
In file included from fs/cifs/cifspdu.h:25,
from fs/cifs/ioctl.c:26:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
LD [M] fs/cifs/cifs.o
CC fs/devpts/inode.o
LD fs/devpts/devpts.o
LD fs/devpts/built-in.o
LD fs/exportfs/built-in.o
CC [M] fs/exportfs/expfs.o
LD [M] fs/exportfs/exportfs.o
LD fs/ext2/built-in.o
CC [M] fs/ext2/balloc.o
fs/ext2/balloc.c: In function `ext2_new_block':
fs/ext2/balloc.c:500: warning: implicit declaration of function
`__raw_write_unlock'
CC [M] fs/ext2/bitmap.o
CC [M] fs/ext2/dir.o
CC [M] fs/ext2/file.o
CC [M] fs/ext2/fsync.o
CC [M] fs/ext2/ialloc.o
CC [M] fs/ext2/inode.o
fs/ext2/inode.c: In function `ext2_discard_prealloc':
fs/ext2/inode.c:102: warning: implicit declaration of function
`__raw_write_unlock'
fs/ext2/inode.c: In function `ext2_get_branch':
fs/ext2/inode.c:287: warning: implicit declaration of function
`__raw_read_unlock'
CC [M] fs/ext2/ioctl.o
CC [M] fs/ext2/namei.o
CC [M] fs/ext2/super.o
CC [M] fs/ext2/symlink.o
LD [M] fs/ext2/ext2.o
LD fs/fat/built-in.o
CC [M] fs/fat/cache.o
CC [M] fs/fat/dir.o
CC [M] fs/fat/fatent.o
CC [M] fs/fat/file.o
CC [M] fs/fat/inode.o
CC [M] fs/fat/misc.o
LD [M] fs/fat/fat.o
LD fs/fuse/built-in.o
CC [M] fs/fuse/dev.o
CC [M] fs/fuse/dir.o
CC [M] fs/fuse/file.o
CC [M] fs/fuse/inode.o
LD [M] fs/fuse/fuse.o
LD fs/isofs/built-in.o
CC [M] fs/isofs/namei.o
CC [M] fs/isofs/inode.o
CC [M] fs/isofs/dir.o
CC [M] fs/isofs/util.o
CC [M] fs/isofs/rock.o
CC [M] fs/isofs/export.o
CC [M] fs/isofs/joliet.o
LD [M] fs/isofs/isofs.o
LD fs/lockd/built-in.o
CC [M] fs/lockd/clntlock.o
CC [M] fs/lockd/clntproc.o
CC [M] fs/lockd/host.o
CC [M] fs/lockd/svc.o
CC [M] fs/lockd/svclock.o
CC [M] fs/lockd/svcshare.o
CC [M] fs/lockd/svcproc.o
CC [M] fs/lockd/svcsubs.o
CC [M] fs/lockd/mon.o
CC [M] fs/lockd/xdr.o
CC [M] fs/lockd/xdr4.o
CC [M] fs/lockd/svc4proc.o
LD [M] fs/lockd/lockd.o
LD fs/nfs/built-in.o
CC [M] fs/nfs/dir.o
CC [M] fs/nfs/file.o
CC [M] fs/nfs/inode.o
CC [M] fs/nfs/nfs2xdr.o
CC [M] fs/nfs/pagelist.o
CC [M] fs/nfs/proc.o
CC [M] fs/nfs/read.o
CC [M] fs/nfs/symlink.o
CC [M] fs/nfs/unlink.o
CC [M] fs/nfs/write.o
CC [M] fs/nfs/nfs3proc.o
CC [M] fs/nfs/nfs3xdr.o
LD [M] fs/nfs/nfs.o
LD fs/nfs_common/built-in.o
LD fs/nfsd/built-in.o
CC [M] fs/nfsd/nfssvc.o
CC [M] fs/nfsd/nfsctl.o
CC [M] fs/nfsd/nfsproc.o
CC [M] fs/nfsd/nfsfh.o
CC [M] fs/nfsd/vfs.o
CC [M] fs/nfsd/export.o
fs/nfsd/export.c: In function `svc_expkey_lookup':
fs/nfsd/export.c:259: warning: implicit declaration of function
`__raw_write_unlock'
fs/nfsd/export.c:259: warning: implicit declaration of function
`__raw_read_unlock'
CC [M] fs/nfsd/auth.o
CC [M] fs/nfsd/lockd.o
CC [M] fs/nfsd/nfscache.o
CC [M] fs/nfsd/nfsxdr.o
CC [M] fs/nfsd/stats.o
CC [M] fs/nfsd/nfs3proc.o
CC [M] fs/nfs/nfs3xdr.o
LD [M] fs/nfs/nfs.o
LD fs/nfs_common/built-in.o
LD fs/nfsd/built-in.o
CC [M] fs/nfsd/nfssvc.o
CC [M] fs/nfsd/nfsctl.o
CC [M] fs/nfsd/nfsproc.o
CC [M] fs/nfsd/nfsfh.o
CC [M] fs/nfsd/vfs.o
CC [M] fs/nfsd/export.o
fs/nfsd/export.c: In function `svc_expkey_lookup':
fs/nfsd/export.c:259: warning: implicit declaration of function
`__raw_write_unlock'
fs/nfsd/export.c:259: warning: implicit declaration of function
`__raw_read_unlock'
CC [M] fs/nfsd/auth.o
CC [M] fs/nfsd/lockd.o
CC [M] fs/nfsd/nfscache.o
CC [M] fs/nfsd/nfsxdr.o
CC [M] fs/nfsd/stats.o
CC [M] fs/nfsd/nfs3proc.o
CC [M] fs/nfsd/nfs3xdr.o
LD [M] fs/nfsd/nfsd.o
LD fs/nls/built-in.o
CC [M] fs/nls/nls_base.o
CC fs/partitions/check.o
CC fs/partitions/msdos.o
LD fs/partitions/built-in.o
CC fs/proc/mmu.o
fs/proc/mmu.c: In function `get_vmalloc_info':
fs/proc/mmu.c:75: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/proc/task_mmu.o
CC fs/proc/inode.o
CC fs/proc/root.o
CC fs/proc/base.o
fs/proc/base.c: In function `proc_cwd_link':
fs/proc/base.c:329: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/proc/generic.o
CC fs/proc/array.o
fs/proc/array.c: In function `task_state':
fs/proc/array.c:182: warning: implicit declaration of function
`__raw_read_unlock'
CC fs/proc/kmsg.o
CC fs/proc/proc_tty.o
CC fs/proc/proc_misc.o
LD fs/proc/proc.o
LD fs/proc/built-in.o
CC fs/ramfs/inode.o
LD fs/ramfs/ramfs.o
LD fs/ramfs/built-in.o
CC fs/reiserfs/bitmap.o
CC fs/reiserfs/do_balan.o
CC fs/reiserfs/namei.o
CC fs/reiserfs/inode.o
CC fs/reiserfs/file.o
CC fs/reiserfs/dir.o
CC fs/reiserfs/fix_node.o
CC fs/reiserfs/super.o
CC fs/reiserfs/prints.o
CC fs/reiserfs/objectid.o
CC fs/reiserfs/lbalance.o
CC fs/reiserfs/ibalance.o
CC fs/reiserfs/stree.o
CC fs/reiserfs/hashes.o
CC fs/reiserfs/tail_conversion.o
CC fs/reiserfs/journal.o
CC fs/reiserfs/resize.o
CC fs/reiserfs/item_ops.o
CC fs/reiserfs/ioctl.o
CC fs/reiserfs/procfs.o
LD fs/reiserfs/reiserfs.o
LD fs/reiserfs/built-in.o
CC fs/sysfs/inode.o
CC fs/sysfs/file.o
CC fs/sysfs/dir.o
CC fs/sysfs/symlink.o
CC fs/sysfs/mount.o
CC fs/sysfs/bin.o
CC fs/sysfs/group.o
LD fs/sysfs/built-in.o
LD fs/vfat/built-in.o
CC [M] fs/vfat/namei.o
LD [M] fs/vfat/vfat.o
LD fs/built-in.o
CC ipc/util.o
CC ipc/msgutil.o
CC ipc/msg.o
CC ipc/sem.o
CC ipc/shm.o
LD ipc/built-in.o
CC security/commoncap.o
LD security/built-in.o
LD crypto/built-in.o
CC drivers/base/core.o
CC drivers/base/sys.o
CC drivers/base/bus.o
CC drivers/base/dd.o
CC drivers/base/driver.o
CC drivers/base/class.o
CC drivers/base/platform.o
CC drivers/base/cpu.o
CC drivers/base/firmware.o
CC drivers/base/init.o
CC drivers/base/map.o
CC drivers/base/dmapool.o
CC drivers/base/attribute_container.o
CC drivers/base/transport_class.o
CC drivers/base/power/shutdown.o
CC drivers/base/power/main.o
CC drivers/base/power/suspend.o
CC drivers/base/power/resume.o
CC drivers/base/power/runtime.o
CC drivers/base/power/sysfs.o
LD drivers/base/power/built-in.o
LD drivers/base/built-in.o
CC drivers/block/elevator.o
drivers/block/elevator.c: In function `elv_unregister':
drivers/block/elevator.c:597: warning: implicit declaration of function
`__raw_read_unlock'
CC drivers/block/ll_rw_blk.o
CC drivers/block/ioctl.o
CC drivers/block/genhd.o
CC drivers/block/scsi_ioctl.o
CC drivers/block/noop-iosched.o
CC drivers/block/cfq-iosched.o
LD drivers/block/built-in.o
CC [M] drivers/block/floppy.o
CC [M] drivers/block/loop.o
CC drivers/cdrom/cdrom.o
LD drivers/cdrom/built-in.o
CC drivers/char/mem.o
CC drivers/char/random.o
CC drivers/char/tty_io.o
drivers/char/tty_io.c: In function `do_tty_hangup':
drivers/char/tty_io.c:1085: warning: implicit declaration of function
`__raw_read_unlock'
CC drivers/char/n_tty.o
CC drivers/char/tty_ioctl.o
CC drivers/char/pty.o
CC drivers/char/misc.o
CC drivers/char/vt_ioctl.o
CC drivers/char/vc_screen.o
CC drivers/char/consolemap.o
CONMK drivers/char/consolemap_deftbl.c
CC drivers/char/consolemap_deftbl.o
CC drivers/char/selection.o
CC drivers/char/keyboard.o
CC drivers/char/vt.o
SHIPPED drivers/char/defkeymap.c
CC drivers/char/defkeymap.o
LD drivers/char/built-in.o
LD drivers/firmware/built-in.o
LD drivers/ide/arm/built-in.o
LD drivers/ide/legacy/built-in.o
CC drivers/ide/pci/amd74xx.o
LD drivers/ide/pci/built-in.o
CC drivers/ide/ide.o
CC drivers/ide/ide-io.o
CC drivers/ide/ide-iops.o
CC drivers/ide/ide-lib.o
CC drivers/ide/ide-probe.o
CC drivers/ide/ide-taskfile.o
CC drivers/ide/setup-pci.o
CC drivers/ide/ide-dma.o
CC drivers/ide/ide-proc.o
LD drivers/ide/ide-core.o
CC drivers/ide/ide-disk.o
CC drivers/ide/ide-cd.o
LD drivers/ide/built-in.o
CC drivers/input/input.o
CC drivers/input/keyboard/atkbd.o
LD drivers/input/keyboard/built-in.o
LD drivers/input/built-in.o
CC drivers/input/serio/serio.o
CC drivers/input/serio/i8042.o
CC drivers/input/serio/libps2.o
LD drivers/input/serio/built-in.o
LD drivers/media/common/built-in.o
LD drivers/media/built-in.o
LD drivers/mfd/built-in.o
LD drivers/misc/built-in.o
CC drivers/net/Space.o
CC drivers/net/loopback.o
In file included from drivers/net/loopback.c:53:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
LD drivers/net/built-in.o
CC [M] drivers/net/3c59x.o
CC [M] drivers/net/mii.o
CC [M] drivers/net/dummy.o
CC drivers/pci/access.o
CC drivers/pci/bus.o
CC drivers/pci/probe.o
CC drivers/pci/remove.o
CC drivers/pci/pci.o
CC drivers/pci/quirks.o
CC drivers/pci/pci-driver.o
CC drivers/pci/search.o
CC drivers/pci/pci-sysfs.o
CC drivers/pci/rom.o
CC drivers/pci/setup-res.o
CC drivers/pci/proc.o
CC drivers/pci/setup-bus.o
CC drivers/pci/msi.o
LD drivers/pci/built-in.o
LD drivers/serial/built-in.o
CC drivers/usb/host/pci-quirks.o
LD drivers/usb/host/built-in.o
LD drivers/usb/built-in.o
LD drivers/video/backlight/built-in.o
CC drivers/video/console/dummycon.o
CC drivers/video/console/vgacon.o
LD drivers/video/console/built-in.o
LD drivers/video/built-in.o
LD drivers/built-in.o
LD sound/built-in.o
CC arch/i386/pci/i386.o
CC arch/i386/pci/direct.o
CC arch/i386/pci/fixup.o
CC arch/i386/pci/legacy.o
CC arch/i386/pci/irq.o
CC arch/i386/pci/common.o
LD arch/i386/pci/built-in.o
CC arch/i386/power/cpu.o
LD arch/i386/power/built-in.o
CC net/socket.o
In file included from net/socket.c:97:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/802/p8023.o
CC net/802/sysctl_net_802.o
LD net/802/built-in.o
CC net/core/sock.o
In file included from include/linux/tcp.h:180,
from net/core/sock.c:112:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/request_sock.o
In file included from include/net/request_sock.h:22,
from net/core/request_sock.c:19:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/skbuff.o
In file included from net/core/skbuff.c:64:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/iovec.o
In file included from net/core/iovec.c:30:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/datagram.o
In file included from net/core/datagram.c:55:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/stream.o
In file included from include/linux/tcp.h:180,
from net/core/stream.c:18:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/scm.o
In file included from net/core/scm.c:32:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/gen_stats.o
CC net/core/gen_estimator.o
In file included from net/core/gen_estimator.c:34:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/sysctl_net_core.o
In file included from net/core/sysctl_net_core.c:13:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/dev.o
In file included from net/core/dev.c:94:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/ethtool.o
CC net/core/dev_mcast.o
In file included from include/net/request_sock.h:22,
from include/linux/ip.h:84,
from include/net/ip.h:28,
from net/core/dev_mcast.c:46:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/dst.o
CC net/core/neighbour.o
In file included from net/core/neighbour.c:32:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/rtnetlink.o
In file included from include/net/request_sock.h:22,
from include/linux/ip.h:84,
from include/net/ip.h:28,
from net/core/rtnetlink.c:45:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/utils.o
CC net/core/link_watch.o
In file included from net/core/link_watch.c:18:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/filter.o
In file included from include/net/request_sock.h:22,
from include/linux/ip.h:84,
from include/net/ip.h:28,
from net/core/filter.c:28:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/core/net-sysfs.o
In file included from net/core/net-sysfs.c:16:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
LD net/core/built-in.o
CC net/ethernet/eth.o
In file included from include/net/request_sock.h:22,
from include/linux/ip.h:84,
from net/ethernet/eth.c:49:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
CC net/ethernet/sysctl_net_ether.o
LD net/ethernet/built-in.o
CC net/ipv4/route.o
In file included from include/linux/mroute.h:129,
from net/ipv4/route.c:89:
include/net/sock.h: In function `sk_dst_get':
include/net/sock.h:972: warning: implicit declaration of function
`__raw_read_unlock'
include/net/sock.h: In function `sk_dst_set':
include/net/sock.h:991: warning: implicit declaration of function
`__raw_write_unlock'
net/ipv4/route.c: In function `rt_check_expire':
net/ipv4/route.c:663: warning: dereferencing `void *' pointer
net/ipv4/route.c:663: error: request for member `raw_lock' in something
not a structure or union
make[2]: *** [net/ipv4/route.o] Error 1
make[1]: *** [net/ipv4] Error 2
make: *** [net] Error 2
And the .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc5-mm1
# Mon Oct 24 18:12:00 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-minerva1"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_1GLOWMEM=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=m
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
# CONFIG_HOSTAP is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
- LL
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 17:51 ` 2.6.14-rc5-mm1 Lexington Luthor
@ 2005-10-24 19:05 ` Benoit Boissinot
0 siblings, 0 replies; 62+ messages in thread
From: Benoit Boissinot @ 2005-10-24 19:05 UTC (permalink / raw)
To: Lexington Luthor; +Cc: Andrew Morton, linux-kernel
On 10/24/05, Lexington Luthor <lexington.luthor@gmail.com> wrote:
> Hi,
>
> This release has a number of build errors for me. I used the vanilla
> 2.6.14-rc5 + 2.6.14-rc5-mm1 patch + CK's 1GB lowmem patch.
you should revert those two patches:
+x86-inline-spin_unlock-if-not-config_debug_spinlock-and-not-config_preempt.patch
+x86-inline-spin_unlock_irq-if-not-config_debug_spinlock-and-not-config_preempt.patch
>
> Here is the make output and the .config listing:
> $ make
> [snip]
> net/ipv4/route.c: In function `rt_check_expire':
> net/ipv4/route.c:663: warning: dereferencing `void *' pointer
> net/ipv4/route.c:663: error: request for member `raw_lock' in something
> not a structure or union
> make[2]: *** [net/ipv4/route.o] Error 1
> make[1]: *** [net/ipv4] Error 2
> make: *** [net] Error 2
regards,
Benoit
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (6 preceding siblings ...)
2005-10-24 17:51 ` 2.6.14-rc5-mm1 Lexington Luthor
@ 2005-10-24 20:48 ` Badari Pulavarty
2005-10-24 21:16 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 5:13 ` intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1 Valdis.Kletnieks
` (9 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Badari Pulavarty @ 2005-10-24 20:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml
On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
I can't seem to keep my AMD64 machine up with 2.6.14-rc5-mm1.
Keep running into following. qlogic driver problem ?
Thanks,
Badari
NMI Watchdog detected LOCKUP on CPU 0
CPU 0
Modules linked in: qlogicfc qla2300 qla2200 qla2xxx firmware_class
ohci_hcd hw_r andom usbcore dm_mod
Pid: 4414, comm: modprobe Not tainted 2.6.14-rc5-mm1 #3
RIP: 0010:[<ffffffff80401d94>] <ffffffff80401d94>{.text.lock.spinlock
+34}
RSP: 0000:ffff81019da91c28 EFLAGS: 00000086
RAX: 0000000000000000 RBX: ffff81017991f288 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff81017991f290
RBP: ffff81019da91c28 R08: 0000000000000034 R09: 0000000000000000
R10: ffff81019da91c08 R11: 0000000000000000 R12: ffff81017991f290
R13: 00000000fffffff4 R14: ffff81017991c000 R15: 0000000000000100
FS: 00002aaaaade36e0(0000) GS:ffffffff80649800(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000836018 CR3: 00000001bdf2a000 CR4: 00000000000006e0
Process modprobe (pid: 4414, threadinfo ffff81019da90000, task
ffff81019e3bb500)
Stack: ffff81019da91cb8 ffffffff80400dec ffff81019da91c78
ffffffff80142ed0
0000000000000000 0000000000000000 0000000000000001
0000000000000001
ffff81017991c000 0000000000000100
Call Trace:<ffffffff80400dec>{wait_for_completion+28}
<ffffffff80142ed0>{group_s end_sig_info+128}
<ffffffff80142f89>{kill_proc_info+73}
<ffffffff8805753c>{:qla2xxx:qla2x00 _free_device+188}
<ffffffff8805880b>{:qla2xxx:qla2x00_probe_one+4187}
<ffffffff80132ce0>{set_cpus_allowed+336}
<ffffffff8012dca3>{__wake_up_com mon+67}
<ffffffff8029741a>{kobject_get+26}
<ffffffff8807c01d>{:qla2200:qla2200_pr obe_one+13}
<ffffffff802a516c>{pci_device_probe+252}
<ffffffff80308d29>{driver_probe_ device+89}
<ffffffff80308da0>{__driver_attach+0}
<ffffffff80308de2>{__driver_attach+ 66}
<ffffffff803086af>{bus_for_each_dev+79}
<ffffffff80308bbc>{driver_attach+ 28}
<ffffffff80308108>{bus_add_driver+136}
<ffffffff80308f0c>{driver_register +76}
<ffffffff802a4ebe>{pci_register_driver+158}
<ffffffff8804d010>{:qla2200:q la2200_init+16}
<ffffffff80154072>{sys_init_module+274}
<ffffffff8010dd2e>{system_call+12 6}
Code: 83 3f 00 7e f9 e9 67 fd ff ff e8 71 ac e9 ff e9 82 fd ff ff
console shuts up ...
scsi3 : QLogic ISP2200 SCSI on PCI bus 19 device 08 irq 21 base 0x4000
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 20:48 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-24 21:16 ` Andrew Morton
2005-10-25 15:12 ` 2.6.14-rc5-mm1 Badari Pulavarty
` (2 more replies)
0 siblings, 3 replies; 62+ messages in thread
From: Andrew Morton @ 2005-10-24 21:16 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: linux-kernel, linux-scsi, Andrew Vasquez
Badari Pulavarty <pbadari@gmail.com> wrote:
>
> On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
> >
>
> I can't seem to keep my AMD64 machine up with 2.6.14-rc5-mm1.
> Keep running into following. qlogic driver problem ?
I don't know why the qlogic driver has suddenly started doing this - were
there any earlier messages which might tell us? Is it possible to increase
the debugging level?
I can spot one bug in there, but the lockup is just a symptom.
There are no qlogic changes in 2.6.14-rc5-mm1.
> Thanks,
> Badari
>
> NMI Watchdog detected LOCKUP on CPU 0
> CPU 0
> Modules linked in: qlogicfc qla2300 qla2200 qla2xxx firmware_class
> ohci_hcd hw_r andom usbcore dm_mod
> Pid: 4414, comm: modprobe Not tainted 2.6.14-rc5-mm1 #3
> RIP: 0010:[<ffffffff80401d94>] <ffffffff80401d94>{.text.lock.spinlock
> +34}
That's a corrupted spinlock.
> RSP: 0000:ffff81019da91c28 EFLAGS: 00000086
> RAX: 0000000000000000 RBX: ffff81017991f288 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000286 RDI: ffff81017991f290
> RBP: ffff81019da91c28 R08: 0000000000000034 R09: 0000000000000000
> R10: ffff81019da91c08 R11: 0000000000000000 R12: ffff81017991f290
> R13: 00000000fffffff4 R14: ffff81017991c000 R15: 0000000000000100
> FS: 00002aaaaade36e0(0000) GS:ffffffff80649800(0000)
> knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000000836018 CR3: 00000001bdf2a000 CR4: 00000000000006e0
> Process modprobe (pid: 4414, threadinfo ffff81019da90000, task
> ffff81019e3bb500)
> Stack: ffff81019da91cb8 ffffffff80400dec ffff81019da91c78
> ffffffff80142ed0
> 0000000000000000 0000000000000000 0000000000000001
> 0000000000000001
> ffff81017991c000 0000000000000100
> Call Trace:<ffffffff80400dec>{wait_for_completion+28}
> <ffffffff80142ed0>{group_s end_sig_info+128}
> <ffffffff80142f89>{kill_proc_info+73}
> <ffffffff8805753c>{:qla2xxx:qla2x00 _free_device+188}
> <ffffffff8805880b>{:qla2xxx:qla2x00_probe_one+4187}
> <ffffffff80132ce0>{set_cpus_allowed+336}
> <ffffffff8012dca3>{__wake_up_com mon+67}
> <ffffffff8029741a>{kobject_get+26}
> <ffffffff8807c01d>{:qla2200:qla2200_pr obe_one+13}
> <ffffffff802a516c>{pci_device_probe+252}
> <ffffffff80308d29>{driver_probe_ device+89}
> <ffffffff80308da0>{__driver_attach+0}
> <ffffffff80308de2>{__driver_attach+ 66}
> <ffffffff803086af>{bus_for_each_dev+79}
> <ffffffff80308bbc>{driver_attach+ 28}
> <ffffffff80308108>{bus_add_driver+136}
> <ffffffff80308f0c>{driver_register +76}
> <ffffffff802a4ebe>{pci_register_driver+158}
> <ffffffff8804d010>{:qla2200:q la2200_init+16}
> <ffffffff80154072>{sys_init_module+274}
> <ffffffff8010dd2e>{system_call+12 6}
qla2x00_probe_one() has called qla2x00_free_device() and
qla2x00_free_device() has locked up in
wait_for_completion(&ha->dpc_exited);
Presumably, ha->dpc_exited is not initialised yet.
The first `goto probe_failed' in qla2x00_probe_one() will cause
qla2x00_free_device() to run wait_for_completion() against an uninitialised
completion struct. Because ha->dpc_pid will be >= 0.
This patch might fix the lockup, but if so, qla2x00_iospace_config()
failed. Please debug that a bit for us?
Andrew, this driver should be converted to use the kthread API - using
kill_proc() from within a driver to terminate a kernel thread is kinda
gross.
diff -puN drivers/scsi/qla2xxx/qla_os.c~qlogic-lockup-fix drivers/scsi/qla2xxx/qla_os.c
--- 25/drivers/scsi/qla2xxx/qla_os.c~qlogic-lockup-fix Mon Oct 24 14:14:20 2005
+++ 25-akpm/drivers/scsi/qla2xxx/qla_os.c Mon Oct 24 14:14:37 2005
@@ -1325,6 +1325,8 @@ int qla2x00_probe_one(struct pci_dev *pd
ha->brd_info = brd_info;
sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
+ ha->dpc_pid = -1;
+
/* Configure PCI I/O space */
ret = qla2x00_iospace_config(ha);
if (ret)
@@ -1448,7 +1450,6 @@ int qla2x00_probe_one(struct pci_dev *pd
*/
spin_lock_init(&ha->mbx_reg_lock);
- ha->dpc_pid = -1;
init_completion(&ha->dpc_inited);
init_completion(&ha->dpc_exited);
_
^ permalink raw reply [flat|nested] 62+ messages in thread
* intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (7 preceding siblings ...)
2005-10-24 20:48 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-25 5:13 ` Valdis.Kletnieks
2005-10-25 5:32 ` Andrew Morton
2005-10-25 17:55 ` 2.6.14-rc5-mm1 Avuton Olrich
` (8 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Valdis.Kletnieks @ 2005-10-25 5:13 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 799 bytes --]
On Mon, 24 Oct 2005 01:48:38 PDT, Andrew Morton said:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
> +agp-updates-owner-field-of-struct-pci_driver.patch
intel-agp would hang during modprobe until I backed this one out.
Am still seeing a hang trying to modprobe yenta-socket during early boot. I'm
not seeing any obvious candidates to back out here - the -rc4-mm1 version is
identical, and -rc4-mm1 boots OK for me.
I wasn't seeing any output from alt-sysrq-T, but it occurs to me that maybe
the console level wasn't set nicely yet - this is happening pretty early in
rc.sysinit.
Is there an undocumented requirement for a newer modprobe? I'm currently
using the Fedora -devel tree's version:
# modprobe -V
module-init-tools version 3.2-pre7
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1
2005-10-25 5:13 ` intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1 Valdis.Kletnieks
@ 2005-10-25 5:32 ` Andrew Morton
2005-10-25 14:07 ` Valdis.Kletnieks
0 siblings, 1 reply; 62+ messages in thread
From: Andrew Morton @ 2005-10-25 5:32 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: linux-kernel, Laurent Riffard
Valdis.Kletnieks@vt.edu wrote:
>
> On Mon, 24 Oct 2005 01:48:38 PDT, Andrew Morton said:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
> > +agp-updates-owner-field-of-struct-pci_driver.patch
>
> intel-agp would hang during modprobe until I backed this one out.
A sysrq trace would be nice.
> Am still seeing a hang trying to modprobe yenta-socket during early boot. I'm
> not seeing any obvious candidates to back out here - the -rc4-mm1 version is
> identical, and -rc4-mm1 boots OK for me.
>
> I wasn't seeing any output from alt-sysrq-T, but it occurs to me that maybe
> the console level wasn't set nicely yet - this is happening pretty early in
> rc.sysinit.
Can you wait until the system is fully booted, get sysrq working then
modprobe the module by hand?
> Is there an undocumented requirement for a newer modprobe?
I hope not. I'm using some ancient thing - it works OK.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 17:21 ` 2.6.14-rc5-mm1 Alan Cox
@ 2005-10-25 9:54 ` Adrian Bunk
2005-10-25 13:00 ` 2.6.14-rc5-mm1 Alan Cox
0 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-10-25 9:54 UTC (permalink / raw)
To: Alan Cox; +Cc: Badari Pulavarty, Andrew Morton, lkml
On Mon, Oct 24, 2005 at 06:21:37PM +0100, Alan Cox wrote:
> On Llu, 2005-10-24 at 17:43 +0200, Adrian Bunk wrote:
> > > CC [M] drivers/serial/jsm/jsm_tty.o
> > > drivers/serial/jsm/jsm_tty.c: In function `jsm_input':
> > > drivers/serial/jsm/jsm_tty.c:592: error: structure has no member named
> > > `flip'
> > >...
> >
> > Quoting Andrew's announcement:
> >
> > - A number of tty drivers still won't compile.
>
> Should only be jsm that won't compile for any mainstream platform, if
> you find others that don't please email me.
The other ones I know about on i386 are:
drivers/char/stallion.c
drivers/char/istallion.c
drivers/char/riscom8.c
drivers/char/rio/riointr.c
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-25 9:54 ` 2.6.14-rc5-mm1 Adrian Bunk
@ 2005-10-25 13:00 ` Alan Cox
2005-10-25 13:29 ` 2.6.14-rc5-mm1 Adrian Bunk
0 siblings, 1 reply; 62+ messages in thread
From: Alan Cox @ 2005-10-25 13:00 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Badari Pulavarty, Andrew Morton, lkml
On Maw, 2005-10-25 at 11:54 +0200, Adrian Bunk wrote:
> The other ones I know about on i386 are:
> drivers/char/stallion.c
> drivers/char/istallion.c
> drivers/char/riscom8.c
> drivers/char/rio/riointr.c
Looking at the code I doubt they worked anyway given the cli() use and
the like but the patch is attached for them.
Signed-off-by: Alan Cox <alan@redhat.com>
--- linux.vanilla-2.6.14-rc4-mm1/drivers/char/stallion.c 2005-10-20 16:12:39.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/char/stallion.c 2005-10-25 13:22:06.843730000 +0100
@@ -2902,7 +2902,8 @@
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
portp->stats.ttystate = portp->tty->flags;
- portp->stats.rxbuffered = portp->tty->flip.count;
+ /* No longer available as a statistic */
+ portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */
if (portp->tty->termios != (struct termios *) NULL) {
portp->stats.cflags = portp->tty->termios->c_cflag;
portp->stats.iflags = portp->tty->termios->c_iflag;
@@ -4046,9 +4047,7 @@
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
len = inb(ioaddr + EREG_DATA);
- if ((tty == (struct tty_struct *) NULL) ||
- (tty->flip.char_buf_ptr == (char *) NULL) ||
- ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
len = MIN(len, sizeof(stl_unwanted));
outb((RDSR + portp->uartaddr), ioaddr);
insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
@@ -4057,12 +4056,10 @@
} else {
len = MIN(len, buflen);
if (len > 0) {
+ unsigned char *ptr;
outb((RDSR + portp->uartaddr), ioaddr);
- insb((ioaddr + EREG_DATA), tty->flip.char_buf_ptr, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.flag_buf_ptr += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.count += len;
+ tty_prepare_flip_string(tty, &ptr, len);
+ insb((ioaddr + EREG_DATA), ptr, len);
tty_schedule_flip(tty);
portp->stats.rxtotal += len;
}
@@ -4086,8 +4083,7 @@
portp->stats.txxoff++;
goto stl_rxalldone;
}
- if ((tty != (struct tty_struct *) NULL) &&
- ((portp->rxignoremsk & status) == 0)) {
+ if (tty != NULL && (portp->rxignoremsk & status) == 0) {
if (portp->rxmarkmsk & status) {
if (status & ST_BREAK) {
status = TTY_BREAK;
@@ -4107,14 +4103,8 @@
} else {
status = 0;
}
- if (tty->flip.char_buf_ptr != (char *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr++ = status;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- }
- tty_schedule_flip(tty);
- }
+ tty_insert_flip_char(tty, ch, status);
+ tty_schedule_flip(tty);
}
} else {
printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
@@ -5013,9 +5003,7 @@
len = inb(ioaddr + XP_DATA) + 1;
if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
- if ((tty == (struct tty_struct *) NULL) ||
- (tty->flip.char_buf_ptr == (char *) NULL) ||
- ((buflen = TTY_FLIPBUF_SIZE - tty->flip.count) == 0)) {
+ if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
len = MIN(len, sizeof(stl_unwanted));
outb(GRXFIFO, (ioaddr + XP_ADDR));
insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
@@ -5024,12 +5012,10 @@
} else {
len = MIN(len, buflen);
if (len > 0) {
+ unsigned char *ptr;
outb(GRXFIFO, (ioaddr + XP_ADDR));
- insb((ioaddr + XP_DATA), tty->flip.char_buf_ptr, len);
- memset(tty->flip.flag_buf_ptr, 0, len);
- tty->flip.flag_buf_ptr += len;
- tty->flip.char_buf_ptr += len;
- tty->flip.count += len;
+ tty_prepare_flip_string(tty, &ptr, len);
+ insb((ioaddr + XP_DATA), ptr, len);
tty_schedule_flip(tty);
portp->stats.rxtotal += len;
}
@@ -5097,14 +5083,8 @@
status = 0;
}
- if (tty->flip.char_buf_ptr != (char *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- *tty->flip.flag_buf_ptr++ = status;
- *tty->flip.char_buf_ptr++ = ch;
- tty->flip.count++;
- }
- tty_schedule_flip(tty);
- }
+ tty_insert_flip_char(tty, ch, status);
+ tty_schedule_flip(tty);
if (status == 0)
portp->stats.rxtotal++;
--- linux.vanilla-2.6.14-rc4-mm1/drivers/char/istallion.c 2005-10-20 16:12:39.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/char/istallion.c 2005-10-25 13:22:06.858728000 +0100
@@ -2714,17 +2714,13 @@
stlen = size - tail;
}
- len = MIN(len, (TTY_FLIPBUF_SIZE - tty->flip.count));
+ len = tty_buffer_request_room(tty, len);
+ /* FIXME : iomap ? */
shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset);
while (len > 0) {
stlen = MIN(len, stlen);
- memcpy(tty->flip.char_buf_ptr, (char *) (shbuf + tail), stlen);
- memset(tty->flip.flag_buf_ptr, 0, stlen);
- tty->flip.char_buf_ptr += stlen;
- tty->flip.flag_buf_ptr += stlen;
- tty->flip.count += stlen;
-
+ tty_insert_flip_string(tty, (char *)(shbuf + tail), stlen);
len -= stlen;
tail += stlen;
if (tail >= size) {
@@ -2909,16 +2905,12 @@
if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
if (tty != (struct tty_struct *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
- if (portp->flags & ASYNC_SAK) {
- do_SAK(tty);
- EBRDENABLE(brdp);
- }
- tty_schedule_flip(tty);
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ EBRDENABLE(brdp);
}
+ tty_schedule_flip(tty);
}
}
@@ -4943,7 +4935,7 @@
if (portp->tty != (struct tty_struct *) NULL) {
if (portp->tty->driver_data == portp) {
stli_comstats.ttystate = portp->tty->flags;
- stli_comstats.rxbuffered = portp->tty->flip.count;
+ stli_comstats.rxbuffered = -1 /*portp->tty->flip.count*/;
if (portp->tty->termios != (struct termios *) NULL) {
stli_comstats.cflags = portp->tty->termios->c_cflag;
stli_comstats.iflags = portp->tty->termios->c_iflag;
--- linux.vanilla-2.6.14-rc4-mm1/drivers/char/riscom8.c 2005-10-20 16:12:39.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/char/riscom8.c 2005-10-25 13:22:06.865726000 +0100
@@ -399,7 +399,7 @@
flag = TTY_NORMAL;
tty_insert_flip_char(tty, ch, flag);
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
}
static inline void rc_receive(struct riscom_board const * bp)
@@ -428,7 +428,7 @@
}
tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
}
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_flip_buffer_push(tty);
}
static inline void rc_transmit(struct riscom_board const * bp)
--- linux.vanilla-2.6.14-rc4-mm1/drivers/char/rio/riointr.c 2005-10-20 16:09:44.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/char/rio/riointr.c 2005-10-25 13:22:06.871726000 +0100
@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/string.h>
@@ -560,6 +561,7 @@
struct PKT *PacketP;
register uint DataCnt;
uchar * ptr;
+ unsigned char *buf;
int copied =0;
static int intCount, RxIntCnt;
@@ -657,8 +659,7 @@
** and available space.
*/
- transCount = min_t(unsigned int, PacketP->len & PKT_LEN_MASK,
- TTY_FLIPBUF_SIZE - TtyP->flip.count);
+ transCount = tty_buffer_request_room(TtyP, PacketP->len & PKT_LEN_MASK);
rio_dprintk (RIO_DEBUG_REC, "port %d: Copy %d bytes\n",
PortP->PortNum, transCount);
/*
@@ -678,9 +679,8 @@
#endif
ptr = (uchar *) PacketP->data + PortP->RxDataStart;
- rio_memcpy_fromio (TtyP->flip.char_buf_ptr, ptr, transCount);
- memset(TtyP->flip.flag_buf_ptr, TTY_NORMAL, transCount);
-
+ tty_prepare_flip_string(TtyP, &buf, transCount);
+ rio_memcpy_fromio (buf, ptr, transCount);
#ifdef STATS
/*
** keep a count for statistical purposes
@@ -690,9 +690,6 @@
PortP->RxDataStart += transCount;
PacketP->len -= transCount;
copied += transCount;
- TtyP->flip.count += transCount;
- TtyP->flip.char_buf_ptr += transCount;
- TtyP->flip.flag_buf_ptr += transCount;
#ifdef ___DEBUG_IT___
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-25 13:00 ` 2.6.14-rc5-mm1 Alan Cox
@ 2005-10-25 13:29 ` Adrian Bunk
0 siblings, 0 replies; 62+ messages in thread
From: Adrian Bunk @ 2005-10-25 13:29 UTC (permalink / raw)
To: Alan Cox; +Cc: Badari Pulavarty, Andrew Morton, lkml
On Tue, Oct 25, 2005 at 02:00:15PM +0100, Alan Cox wrote:
> On Maw, 2005-10-25 at 11:54 +0200, Adrian Bunk wrote:
> > The other ones I know about on i386 are:
> > drivers/char/stallion.c
> > drivers/char/istallion.c
> > drivers/char/riscom8.c
> > drivers/char/rio/riointr.c
>
> Looking at the code I doubt they worked anyway given the cli() use and
> the like but the patch is attached for them.
>...
This left the following compile error solved by the trivial patch below:
<-- snip -->
...
CC drivers/char/riscom8.o
...
drivers/char/riscom8.c: In function 'rc_receive_exc':
drivers/char/riscom8.c:401: warning: implicit declaration of function 'tty_insert_flip_char'
drivers/char/riscom8.c: In function 'rc_receive':
drivers/char/riscom8.c:423: warning: implicit declaration of function 'tty_buffer_request_room'
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `rc_interrupt':
riscom8.c:(.text+0x281817): undefined reference to `tty_insert_flip_char'
riscom8.c:(.text+0x28189e): undefined reference to `tty_insert_flip_char'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.14-rc5-mm1/drivers/char/riscom8.c.old 2005-10-25 15:24:24.000000000 +0200
+++ linux-2.6.14-rc5-mm1/drivers/char/riscom8.c 2005-10-25 15:28:08.000000000 +0200
@@ -46,6 +46,7 @@
#include <linux/major.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/tty_flip.h>
#include <asm/uaccess.h>
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1
2005-10-25 5:32 ` Andrew Morton
@ 2005-10-25 14:07 ` Valdis.Kletnieks
2005-10-27 8:07 ` 2.6.14-rc5-mm1 crypto issues (was " Valdis.Kletnieks
0 siblings, 1 reply; 62+ messages in thread
From: Valdis.Kletnieks @ 2005-10-25 14:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Laurent Riffard
[-- Attachment #1: Type: text/plain, Size: 660 bytes --]
On Mon, 24 Oct 2005 22:32:23 PDT, Andrew Morton said:
> > intel-agp would hang during modprobe until I backed this one out.
>
> A sysrq trace would be nice.
Did some further testing, this time passing a loglevel= so I'd see the output,
and sysrq-T showed that both modprobe issues were due to an even earlier
modprobe that went south. Looking like a bad merge of a local patch caused
some locking to get corrupted (always a bad sign when atomic_dec_and_test
throws an "atomic counter underflow" message on a refcount). It's now unclear
why backing out the agp-updates patch allowed modprobe to succeed - it
*shouldn't* have made a difference. Oddness.
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 21:16 ` 2.6.14-rc5-mm1 Andrew Morton
@ 2005-10-25 15:12 ` Badari Pulavarty
2005-10-25 17:57 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 16:13 ` 2.6.14-rc5-mm1 Christoph Hellwig
2005-10-27 15:26 ` 2.6.14-rc5-mm1 Andrew Vasquez
2 siblings, 1 reply; 62+ messages in thread
From: Badari Pulavarty @ 2005-10-25 15:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: lkml, linux-scsi, Andrew Vasquez
On Mon, 2005-10-24 at 14:16 -0700, Andrew Morton wrote:
..
>
> qla2x00_probe_one() has called qla2x00_free_device() and
> qla2x00_free_device() has locked up in
> wait_for_completion(&ha->dpc_exited);
>
> Presumably, ha->dpc_exited is not initialised yet.
>
> The first `goto probe_failed' in qla2x00_probe_one() will cause
> qla2x00_free_device() to run wait_for_completion() against an uninitialised
> completion struct. Because ha->dpc_pid will be >= 0.
>
> This patch might fix the lockup, but if so, qla2x00_iospace_config()
> failed. Please debug that a bit for us?
Yes. This patch helped. Due to power failures, my disk trays are
powered off. qla2x00_iospace_config() is failing and causing the
panic on -mm kernel. For odd reasons, older -mm kernels & mainline
kernels doesn't panic.
Thanks,
Badari
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 21:16 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 15:12 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-25 16:13 ` Christoph Hellwig
2005-10-27 15:26 ` 2.6.14-rc5-mm1 Andrew Vasquez
2 siblings, 0 replies; 62+ messages in thread
From: Christoph Hellwig @ 2005-10-25 16:13 UTC (permalink / raw)
To: Andrew Morton; +Cc: Badari Pulavarty, linux-kernel, linux-scsi, Andrew Vasquez
On Mon, Oct 24, 2005 at 02:16:46PM -0700, Andrew Morton wrote:
> qla2x00_probe_one() has called qla2x00_free_device() and
> qla2x00_free_device() has locked up in
> wait_for_completion(&ha->dpc_exited);
one more reason to use one-for-one goto-style unwinding instead of
calling _free routines ;-)
While we're at it - Andew, would you converting qla2xxx to the
kthread_ API for thread handling?
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (8 preceding siblings ...)
2005-10-25 5:13 ` intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1 Valdis.Kletnieks
@ 2005-10-25 17:55 ` Avuton Olrich
2005-10-25 18:39 ` 2.6.14-rc5-mm1 Alan Cox
2005-10-25 23:49 ` 2.6.14-rc5-mm1 - ide-cs, pcmcia ioctl Damir Perisa
` (7 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Avuton Olrich @ 2005-10-25 17:55 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On 10/24/05, Andrew Morton <akpm@osdl.org> wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
After upgrading to 2.6.14-rc5-mm1 I have been greeted with:
PCI-Bridge- Detected Parity Error on 0000:00:08.0 0000:00:08.0
Which is:
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI
Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: e2000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
... I probably get a new one every minute or so. Is this new, perhaps
part of the new EDAC stuff? And what kind of adverse effect does this
have on my computer (the actual parity error)?
Thanks,
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-25 15:12 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-25 17:57 ` Andrew Morton
0 siblings, 0 replies; 62+ messages in thread
From: Andrew Morton @ 2005-10-25 17:57 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: linux-kernel, linux-scsi, andrew.vasquez
Badari Pulavarty <pbadari@gmail.com> wrote:
>
> On Mon, 2005-10-24 at 14:16 -0700, Andrew Morton wrote:
> ..
> >
> > qla2x00_probe_one() has called qla2x00_free_device() and
> > qla2x00_free_device() has locked up in
> > wait_for_completion(&ha->dpc_exited);
> >
> > Presumably, ha->dpc_exited is not initialised yet.
> >
> > The first `goto probe_failed' in qla2x00_probe_one() will cause
> > qla2x00_free_device() to run wait_for_completion() against an uninitialised
> > completion struct. Because ha->dpc_pid will be >= 0.
> >
> > This patch might fix the lockup, but if so, qla2x00_iospace_config()
> > failed. Please debug that a bit for us?
>
> Yes. This patch helped. Due to power failures, my disk trays are
> powered off. qla2x00_iospace_config() is failing and causing the
> panic on -mm kernel. For odd reasons, older -mm kernels & mainline
> kernels doesn't panic.
OK, thanks. Andrew seems offline and this patch is sufficiently obvious
that I think I'll just jam it into 2.6.14...
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-25 18:39 ` 2.6.14-rc5-mm1 Alan Cox
@ 2005-10-25 18:16 ` Avuton Olrich
2005-10-26 7:48 ` EDAC (was: Re: 2.6.14-rc5-mm1) Sander
1 sibling, 0 replies; 62+ messages in thread
From: Avuton Olrich @ 2005-10-25 18:16 UTC (permalink / raw)
To: Alan Cox; +Cc: Andrew Morton, linux-kernel
On 10/25/05, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> On Maw, 2005-10-25 at 10:55 -0700, Avuton Olrich wrote:
> > After upgrading to 2.6.14-rc5-mm1 I have been greeted with:
> > PCI-Bridge- Detected Parity Error on 0000:00:08.0 0000:00:08.0
>
> > ... I probably get a new one every minute or so. Is this new, perhaps
> > part of the new EDAC stuff? And what kind of adverse effect does this
> > have on my computer (the actual parity error)?
>
> If the parity error is real then it would indicate a bad PCI transfer
> has occurred and data corrupted in the transfer. Unfortunately because
> some vendors don't use PCI parity checking much and some card vendors
> don't debug their products except on that OS there are some cards that
> generate spurious parity errors.
>
> Can you send an lspci -vxx. That'll help the EDAC folk build up a view
> of what needs to be blacklisted.
Thanks for the answer, here's the lspci -vxx:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=32M]
Capabilities: [40] AGP version 2.0
Capabilities: [60] #08 [2001]
00: de 10 e0 01 06 00 b0 00 a2 00 00 06 00 00 80 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: 66Mhz, fast devsel
00: de 10 eb 01 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: 66Mhz, fast devsel
00: de 10 ee 01 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: 66Mhz, fast devsel
00: de 10 ed 01 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: 66Mhz, fast devsel
00: de 10 ec 01 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80ac
Flags: 66Mhz, fast devsel
00: de 10 ef 01 00 00 20 00 a2 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0
Capabilities: [48] #08 [01e1]
00: de 10 60 00 0f 00 b0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ad 80
30: 00 00 00 00 48 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Flags: 66Mhz, fast devsel, IRQ 5
I/O ports at c800 [size=32]
Capabilities: [44] Power Management version 2
00: de 10 64 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 17
Memory at e9080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00: de 10 67 00 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 00 08 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 18
Memory at e9082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00: de 10 67 00 07 00 b0 00 a3 10 03 0c 00 00 80 00
10: 00 20 08 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0c 02 03 01
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 16
Memory at e9083000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
00: de 10 68 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 30 08 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 17
Memory at e9084000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cc00 [size=8]
Capabilities: [44] Power Management version 2
00: de 10 66 00 07 00 b0 00 a1 00 00 02 00 00 00 00
10: 00 40 08 e9 01 cc 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a7 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce
Audio Processing Unit (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 3
Memory at e9000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
00: de 10 6b 00 06 00 b0 00 a2 00 01 04 00 00 00 00
10: 00 00 00 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 01 0c
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
Subsystem: ASUSTeK Computer Inc.: Unknown device 8095
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
I/O ports at c000 [size=256]
I/O ports at c400 [size=128]
Memory at e9081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00: de 10 6a 00 07 00 b0 00 a1 00 01 04 00 00 00 00
10: 01 c0 00 00 01 c4 00 00 00 10 08 e9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 95 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 05
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI
Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: e2000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
00: de 10 6c 00 07 01 a0 00 a3 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 90 a0 80 a2
20: 00 e2 f0 e5 00 e6 f0 e6 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 06
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 0c11
Flags: bus master, 66Mhz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
00: de 10 65 00 05 00 b0 00 a2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev
a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e7000000-e8ffffff
Prefetchable memory behind bridge: 30000000-300fffff
00: de 10 6d 00 07 01 a0 00 a3 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 b0 b0 80 02
20: 00 e7 f0 e8 00 30 00 30 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
00: de 10 e8 01 07 01 20 02 a2 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 20 f0 00 20 22
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
0000:01:07.0 VGA compatible controller: Matrox Graphics, Inc. MGA
1064SG [Mystique] (rev 03) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0000
Flags: bus master, stepping, medium devsel, latency 32, IRQ 7
Memory at e6000000 (32-bit, prefetchable) [size=8M]
Memory at e2000000 (32-bit, non-prefetchable) [size=16K]
Memory at e3000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e68a0000 [disabled] [size=64K]
00: 2b 10 1a 05 87 00 80 02 03 00 00 03 00 20 00 00
10: 08 00 00 e6 00 00 00 e2 00 00 00 e3 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
Subsystem: Creative Labs SB Audigy 2 ZS (SB0350)
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at 9000 [size=64]
Capabilities: [dc] Power Management version 2
00: 02 11 04 00 05 00 90 02 04 00 01 04 00 20 80 00
10: 01 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 02 20
30: 00 00 00 00 dc 00 00 00 00 00 00 00 04 01 02 14
0000:01:09.1 Input device controller: Creative Labs SB Audigy
MIDI/Game port (rev 04)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Flags: bus master, medium devsel, latency 32
I/O ports at 9400 [size=8]
Capabilities: [dc] Power Management version 2
00: 02 11 03 70 05 00 90 02 04 00 80 09 00 20 80 00
10: 01 94 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 40 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
0000:01:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire
Port (rev 04) (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e5004000 (32-bit, non-prefetchable) [size=2K]
Memory at e5000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
00: 02 11 01 40 06 00 10 02 04 10 00 0c 08 20 80 00
10: 00 40 00 e5 00 00 00 e5 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 10 00
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 04
0000:01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 19
I/O ports at 9800 [size=256]
Memory at e5005000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at e6880000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00: ec 10 69 81 17 00 b0 02 10 00 00 02 10 20 00 00
10: 01 98 00 00 00 50 00 e5 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 69 81
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0c 01 20 40
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 20
I/O ports at 9c00 [size=8]
I/O ports at a000 [size=4]
I/O ports at a400 [size=8]
I/O ports at a800 [size=4]
I/O ports at ac00 [size=16]
Memory at e5006000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at e6800000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
00: 95 10 12 31 07 00 b0 02 01 00 04 01 08 20 00 00
10: 01 9c 00 00 01 a0 00 00 01 a4 00 00 01 a8 00 00
20: 01 ac 00 00 00 60 00 e5 00 00 00 00 95 10 12 61
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB
Integrated Fast Ethernet Controller [Tornado] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB
Integrated Fast Ethernet Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at b000 [size=128]
Memory at e8000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00: b7 10 01 92 07 00 10 02 40 00 00 02 08 20 00 00
10: 01 b0 00 00 00 00 00 e8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ab 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 0a 0a
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-25 17:55 ` 2.6.14-rc5-mm1 Avuton Olrich
@ 2005-10-25 18:39 ` Alan Cox
2005-10-25 18:16 ` 2.6.14-rc5-mm1 Avuton Olrich
2005-10-26 7:48 ` EDAC (was: Re: 2.6.14-rc5-mm1) Sander
0 siblings, 2 replies; 62+ messages in thread
From: Alan Cox @ 2005-10-25 18:39 UTC (permalink / raw)
To: Avuton Olrich; +Cc: Andrew Morton, linux-kernel
On Maw, 2005-10-25 at 10:55 -0700, Avuton Olrich wrote:
> On 10/24/05, Andrew Morton <akpm@osdl.org> wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
>
> After upgrading to 2.6.14-rc5-mm1 I have been greeted with:
>
> PCI-Bridge- Detected Parity Error on 0000:00:08.0 0000:00:08.0
> ... I probably get a new one every minute or so. Is this new, perhaps
> part of the new EDAC stuff? And what kind of adverse effect does this
> have on my computer (the actual parity error)?
If the parity error is real then it would indicate a bad PCI transfer
has occurred and data corrupted in the transfer. Unfortunately because
some vendors don't use PCI parity checking much and some card vendors
don't debug their products except on that OS there are some cards that
generate spurious parity errors.
Can you send an lspci -vxx. That'll help the EDAC folk build up a view
of what needs to be blacklisted.
Alan
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1 - ide-cs, pcmcia ioctl
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (9 preceding siblings ...)
2005-10-25 17:55 ` 2.6.14-rc5-mm1 Avuton Olrich
@ 2005-10-25 23:49 ` Damir Perisa
2005-10-27 21:31 ` 2.6.14-rc5-mm1 - ide-cs broken! Damir Perisa
2005-10-28 17:58 ` 2.6.14-rc5-mm1: EDAC: several options without a help text Adrian Bunk
` (6 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Damir Perisa @ 2005-10-25 23:49 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 4703 bytes --]
Le Monday 24 October 2005 10:48, Andrew Morton a écrit :
| - A number of tty drivers still won't compile.
after disabling jsm, i finally build once again a mm-kernel successfully!
booting the fresh kernel26mm, i ran into a problem with ide-cs:
info while booting / start of hotplug:
Oct 26 01:02:28 localhost kernel: [17179579.008000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0185]
Oct 26 01:02:28 localhost kernel: [17179579.160000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Oct 26 01:02:28 localhost kernel: [17179579.184000] Socket status: 30000006
Oct 26 01:02:28 localhost kernel: [17179579.208000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
Oct 26 01:02:28 localhost kernel: [17179579.232000] cs: IO port probe 0x4000-0x8fff: clean.
Oct 26 01:02:28 localhost kernel: [17179579.256000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
Oct 26 01:02:28 localhost kernel: [17179579.280000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff
when i plug in the pcmcia-compact-flash adapter into the laptop:
Oct 26 01:05:10 localhost kernel: [17179767.840000] cs: memory probe 0xf0000000-0xf80fffff: excluding 0xf0000000-0xf87fffff
Oct 26 01:05:11 localhost kernel: [17179767.924000] ide_cs: Unknown symbol cs_error
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_deregister_client
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_first_tuple
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_unregister_driver
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_tuple_data
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_next_tuple
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_register_client
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_configuration_info
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_request_io
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_request_configuration
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_release_configuration
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_parse_tuple
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_release_io
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_register_driver
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_release_irq
Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_request_irq
Oct 26 01:05:11 localhost kernel: [17179768.176000] Probing IDE interface ide2...
Oct 26 01:05:11 localhost kernel: [17179768.464000] hde: 1024MB Flash Card, CFA DISK drive
Oct 26 01:05:12 localhost kernel: [17179769.136000] ide2 at 0x4100-0x4107,0x410e on irq 3
Oct 26 01:05:12 localhost kernel: [17179769.136000] hde: max request size: 128KiB
Oct 26 01:05:12 localhost kernel: [17179769.136000] hde: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63
Oct 26 01:05:12 localhost kernel: [17179769.136000] hde: cache flushes not supported
Oct 26 01:05:12 localhost kernel: [17179769.140000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.148000] ide-cs: hde: Vcc = 3.3, Vpp = 0.0
Oct 26 01:05:12 localhost kernel: [17179769.260000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.292000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.300000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.440000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.532000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.720000] hde: hde1
Oct 26 01:05:12 localhost kernel: [17179769.868000] hde: hde1
Oct 26 01:05:13 localhost kernel: [17179770.016000] hde: hde1
...
and it repeats this untill i either power off the machine or take
out the pcmcia compact flash addapter (what results in a freeze
of everything (unfortunately no log output and no sysrq working
(probably because keyboard also not working)), so powering off is anyway
the only option)
as a semi-professional photographer, i depend on a working ide-cs device.
the last kernel it worked is some months old... until now i never
checked and now i discovered this break.
i use pcmciautils 010
if you need more information, i will try to help wherever i can to help to
make ide-cs work again.
greetings,
Damir
--
If a man has talent and cannot use it, he has failed.
-- Thomas Wolfe
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 62+ messages in thread
* EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-25 18:39 ` 2.6.14-rc5-mm1 Alan Cox
2005-10-25 18:16 ` 2.6.14-rc5-mm1 Avuton Olrich
@ 2005-10-26 7:48 ` Sander
2005-10-26 11:09 ` Alan Cox
1 sibling, 1 reply; 62+ messages in thread
From: Sander @ 2005-10-26 7:48 UTC (permalink / raw)
To: Alan Cox; +Cc: Avuton Olrich, Andrew Morton, linux-kernel
Alan Cox wrote (ao):
> On Maw, 2005-10-25 at 10:55 -0700, Avuton Olrich wrote:
> > After upgrading to 2.6.14-rc5-mm1 I have been greeted with:
> >
> > PCI-Bridge- Detected Parity Error on 0000:00:08.0 0000:00:08.0
>
> > ... I probably get a new one every minute or so. Is this new, perhaps
> > part of the new EDAC stuff? And what kind of adverse effect does this
> > have on my computer (the actual parity error)?
>
> If the parity error is real then it would indicate a bad PCI transfer
> has occurred and data corrupted in the transfer. Unfortunately because
> some vendors don't use PCI parity checking much and some card vendors
> don't debug their products except on that OS there are some cards that
> generate spurious parity errors.
>
> Can you send an lspci -vxx. That'll help the EDAC folk build up a view
> of what needs to be blacklisted.
Stupid question: should EDAC work on a Via Epia board? Because I see the
"Detected Parity Error" messages too (and a lot of them), but figured
that the option is just 'not an option' :-)
If it should work I'll be happy to send the error and lspci if that
helps.
--
Humilis IT Services and Solutions
http://www.humilis.net
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 7:48 ` EDAC (was: Re: 2.6.14-rc5-mm1) Sander
@ 2005-10-26 11:09 ` Alan Cox
2005-10-26 13:11 ` Sander
0 siblings, 1 reply; 62+ messages in thread
From: Alan Cox @ 2005-10-26 11:09 UTC (permalink / raw)
To: sander; +Cc: Avuton Olrich, Andrew Morton, linux-kernel
On Mer, 2005-10-26 at 09:48 +0200, Sander wrote:
> Stupid question: should EDAC work on a Via Epia board? Because I see the
> "Detected Parity Error" messages too (and a lot of them), but figured
> that the option is just 'not an option' :-)
The PCI parity check should work on every correctly built PCI card and
bridge.
> If it should work I'll be happy to send the error and lspci if that
> helps.
Please do. I'm trying to find the common items that cause spurious pci
errors
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 11:09 ` Alan Cox
@ 2005-10-26 13:11 ` Sander
2005-10-26 19:08 ` Doug Thompson
0 siblings, 1 reply; 62+ messages in thread
From: Sander @ 2005-10-26 13:11 UTC (permalink / raw)
To: Alan Cox; +Cc: sander, Avuton Olrich, Andrew Morton, linux-kernel
Alan Cox wrote (ao):
> On Mer, 2005-10-26 at 09:48 +0200, Sander wrote:
> > Stupid question: should EDAC work on a Via Epia board? Because I see the
> > "Detected Parity Error" messages too (and a lot of them), but figured
> > that the option is just 'not an option' :-)
>
> The PCI parity check should work on every correctly built PCI card and
> bridge.
>
> > If it should work I'll be happy to send the error and lspci if that
> > helps.
>
> Please do. I'm trying to find the common items that cause spurious pci
> errors
Via Epia MII 10000, kernel 2.6.14-rc4-mm1:
$ grep EDAC .config
# EDAC - error detection and reporting (RAS)
CONFIG_EDAC=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
[42949380.590000] Freeing unused kernel memory: 168k freed
[42949381.350000] PCI- Detected Parity Error on 0000:00:01.0 0000:00:01.0
[42949382.350000] PCI- Detected Parity Error on 0000:00:01.0 0000:00:01.0
[42949383.350000] PCI- Detected Parity Error on 0000:00:01.0 0000:00:01.0
[42949384.350000] PCI- Detected Parity Error on 0000:00:01.0 0000:00:01.0
etc
lspci -vxx:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at e7000000 (32-bit, prefetchable) [size=4M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00: 06 11 23 31 06 00 30 22 00 00 00 06 00 08 00 00
10: 08 00 00 e7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e0000000-e3ffffff
Capabilities: [80] Power Management version 2
00: 06 11 91 b0 07 01 30 a2 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 a2
20: 00 e4 f0 e5 00 e0 f0 e3 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
0000:00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e742b000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 42000000-43fff000 (prefetchable)
I/O window 0: 00001000-00001fff
I/O window 1: 00002000-00002fff
16-bit legacy interface ports at 0001
00: 80 11 76 04 07 00 10 02 80 00 07 06 00 20 82 00
10: 00 b0 42 e7 dc 00 00 02 00 02 05 b0 00 00 00 40
20: 00 f0 ff 41 00 00 00 42 00 f0 ff 43 00 10 00 00
30: fc 1f 00 00 00 20 00 00 fc 2f 00 00 05 01 80 07
40: 06 11 01 aa 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 12
Memory at e7423000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 44000000-45fff000 (prefetchable)
Memory window 1: 46000000-47fff000 (prefetchable)
I/O window 0: 00003000-00003fff
I/O window 1: 00004000-00004fff
16-bit legacy interface ports at 0001
00: 80 11 76 04 07 00 10 02 80 00 07 06 00 20 82 00
10: 00 30 42 e7 dc 00 00 02 00 06 09 b0 00 00 00 44
20: 00 f0 ff 45 00 00 00 46 00 f0 ff 47 00 30 00 00
30: fc 3f 00 00 00 40 00 00 fc 4f 00 00 0c 02 80 07
40: 06 11 01 aa 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at c000 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 c0 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 c4 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 80 00 00 00 00 00 00 00 0c 02 00 00
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 7
I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
00: 06 11 38 30 07 00 10 02 80 00 03 0c 08 20 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 c8 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 03 00 00
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at e7428000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00: 06 11 04 31 07 00 10 02 82 20 03 0c 08 20 00 00
10: 00 80 42 e7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30: 00 00 00 00 80 00 00 00 00 00 00 00 09 04 00 00
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.: Unknown device aa01
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at cc00 [size=16]
Capabilities: [c0] Power Management version 2
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 cc 00 00 00 00 00 00 00 00 00 00 06 11 01 aa
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=256]
Memory at e7429000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
00: 06 11 65 30 07 00 10 02 74 00 00 02 08 20 00 00
10: 01 d4 00 00 00 90 42 e7 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 03 08
0000:00:14.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Flags: bus master, 66MHz, medium devsel, latency 96, IRQ 12
I/O ports at d800 [size=64]
I/O ports at dc00 [size=16]
I/O ports at e000 [size=128]
Memory at e742a000 (32-bit, non-prefetchable) [size=4K]
Memory at e7400000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at 48000000 [disabled] [size=16K]
Capabilities: [60] Power Management version 2
00: 5a 10 18 33 07 00 30 02 02 00 80 01 90 60 00 00
10: 01 d8 00 00 01 dc 00 00 01 e0 00 00 00 a0 42 e7
20: 00 00 40 e7 00 00 00 00 00 00 00 00 5a 10 18 33
30: 00 00 00 00 60 00 00 00 00 00 00 00 0c 01 04 12
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) (prog-if 00 [VGA])
Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 2.0
00: 06 11 22 31 07 00 30 02 03 00 00 03 00 20 00 00
10: 08 00 00 e0 00 00 00 e4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 22 31
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 02 00
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 13:11 ` Sander
@ 2005-10-26 19:08 ` Doug Thompson
2005-10-26 19:38 ` Sander
0 siblings, 1 reply; 62+ messages in thread
From: Doug Thompson @ 2005-10-26 19:08 UTC (permalink / raw)
To: linux-kernel; +Cc: sander, Avuton Olrich, Andrew Morton
--- Sander <sander@humilis.net> wrote:
> Alan Cox wrote (ao):
> > On Mer, 2005-10-26 at 09:48 +0200, Sander wrote:
> > > Stupid question: should EDAC work on a Via Epia
> board? Because I see the
> > > "Detected Parity Error" messages too (and a lot
> of them), but figured
> > > that the option is just 'not an option' :-)
> >
> > The PCI parity check should work on every
> correctly built PCI card and
> > bridge.
> >
> > > If it should work I'll be happy to send the
> error and lspci if that
> > > helps.
> >
> > Please do. I'm trying to find the common items
> that cause spurious pci
> > errors
>
> Via Epia MII 10000, kernel 2.6.14-rc4-mm1:
>
> $ grep EDAC .config
> # EDAC - error detection and reporting (RAS)
> CONFIG_EDAC=y
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=y
> # CONFIG_EDAC_AMD76X is not set
> # CONFIG_EDAC_E7XXX is not set
> # CONFIG_EDAC_E752X is not set
> # CONFIG_EDAC_I82875P is not set
> # CONFIG_EDAC_I82860 is not set
> # CONFIG_EDAC_R82600 is not set
> CONFIG_EDAC_POLL=y
>
>
> [42949380.590000] Freeing unused kernel memory: 168k
> freed
> [42949381.350000] PCI- Detected Parity Error on
> 0000:00:01.0 0000:00:01.0
> [42949382.350000] PCI- Detected Parity Error on
> 0000:00:01.0 0000:00:01.0
> [42949383.350000] PCI- Detected Parity Error on
> 0000:00:01.0 0000:00:01.0
> [42949384.350000] PCI- Detected Parity Error on
> 0000:00:01.0 0000:00:01.0
>
> etc
>
The EDAC scanning code first scans the STATUS register
of all the PCI devices in the system. This status
register reflects operations on the main bus.
Second, the code scans the SECONDARY STATUS register
of all bridge devices, which reflects operations on
the sub-bus.
This instance (0000:00:01.0) of output shows me the
VIA VT8633 is generating the parity bit. The default
poll interval if 1000 ms and the above output shows
this. This bridge is either having a parity error on
the main bus OR more likely is generating false
positives. How to determine which? More investigation
is needed.
But at least there is some DETECTION occurring. If it
is false positives, then this device could be placed
on the "future" blacklist list and at boot time fed to
the EDAC module.
There is a difference between "detecting" the parity
and "handling" it. Currently edac is setup to detect
and report.
doug thompson
>
> lspci -vxx:
>
<snip>
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc.
> VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal
> decode])
> Flags: bus master, 66MHz, medium devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01,
> sec-latency=0
> Memory behind bridge: e4000000-e5ffffff
> Prefetchable memory behind bridge:
> e0000000-e3ffffff
> Capabilities: [80] Power Management version 2
> 00: 06 11 91 b0 07 01 30 a2 00 00 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 a2
> 20: 00 e4 f0 e5 00 e0 f0 e3 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00
"If you think Education is expensive, just try Ignorance"
"Don't tell people HOW to do things, tell them WHAT you
want and they will surprise you with their ingenuity."
Gen George Patton
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 19:08 ` Doug Thompson
@ 2005-10-26 19:38 ` Sander
2005-10-26 20:22 ` Doug Thompson
0 siblings, 1 reply; 62+ messages in thread
From: Sander @ 2005-10-26 19:38 UTC (permalink / raw)
To: Doug Thompson; +Cc: linux-kernel, sander, Avuton Olrich, Andrew Morton
Doug Thompson wrote (ao):
> --- Sander <sander@humilis.net> wrote:
> > Via Epia MII 10000, kernel 2.6.14-rc4-mm1:
> The EDAC scanning code first scans the STATUS register
> of all the PCI devices in the system. This status
> register reflects operations on the main bus.
> Second, the code scans the SECONDARY STATUS register
> of all bridge devices, which reflects operations on
> the sub-bus.
>
> This instance (0000:00:01.0) of output shows me the
> VIA VT8633 is generating the parity bit. The default
> poll interval if 1000 ms and the above output shows
> this. This bridge is either having a parity error on
> the main bus OR more likely is generating false
> positives. How to determine which? More investigation
> is needed.
Anything I can do? And will blacklisting make EDAC useless? If so, does
it make more sense not to configure EDAC?
--
Humilis IT Services and Solutions
http://www.humilis.net
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 19:38 ` Sander
@ 2005-10-26 20:22 ` Doug Thompson
2005-10-27 6:23 ` Sander
2005-10-27 16:50 ` Roger Heflin
0 siblings, 2 replies; 62+ messages in thread
From: Doug Thompson @ 2005-10-26 20:22 UTC (permalink / raw)
To: sander; +Cc: linux-kernel, sander, Avuton Olrich, Andrew Morton
--- Sander <sander@humilis.net> wrote:
> Doug Thompson wrote (ao):
> > --- Sander <sander@humilis.net> wrote:
> > > Via Epia MII 10000, kernel 2.6.14-rc4-mm1:
>
> > The EDAC scanning code first scans the STATUS
> register
> > of all the PCI devices in the system. This status
> > register reflects operations on the main bus.
> > Second, the code scans the SECONDARY STATUS
> register
> > of all bridge devices, which reflects operations
> on
> > the sub-bus.
> >
> > This instance (0000:00:01.0) of output shows me
> the
> > VIA VT8633 is generating the parity bit. The
> default
> > poll interval if 1000 ms and the above output
> shows
> > this. This bridge is either having a parity error
> on
> > the main bus OR more likely is generating false
> > positives. How to determine which? More
> investigation
> > is needed.
>
> Anything I can do?
To help? Keep an eye for other devices which post
parity errors.
To overcome this on your own system? If you don't want
so many message for the moment, turn off EDAC. Later
when the blacklist is avaliable, put this device in
the blacklist.
> And will blacklisting make EDAC useless?
No, just less closure, less complete. If we were SURE
all devices followed the rules, then a parity event is
a BAD thing we could then count on. Since it is an
imperfect world, we gather the "blacklist" of cards
that don't follow the PCI spec, send them a blasting
letter, buy alternatives that do work and continue to
scan for parity errors.
This scanning of parity errrors allowed my company to
isolate data corruption between an interconnect in
nodes on a cluster. The fault? The riser card had
failings. With this parity scanner, we isolated the
borderline risers and replaced them. Saved alot of
time. Luckily, the card we had did NOT generate false
positives. We have another high speed interconnect
which does generate false positives, we told them
about it. Helped them reproduce the reporting via
script using 'setpci'. They finally ack'd they had a
firmware problem and will rev the FW in january -
yeah!
> If so, does it make more sense not to configure
EDAC?
depends on your requirements.
we have been living with systems with PCI devices for
a decade now. how many times have events occurred that
had no explaination and are simply dismissed? There
were no detectors.
We assume many things, even today. How many desktops
with gigs of memory have no ECC? I have learned my
lesson while refactoring bluesmoke/edac that ECC is
very important. ECC always in my machines for now on,
for me anyway.
For PCI devices, if you want to "know" data is being
transmitted correctly, then there needs to be
"detector" and "reporter" and "handler" agents of this
bad events to properly notice, report and process
them.
doug thompson
>
> --
> Humilis IT Services and Solutions
> http://www.humilis.net
>
"If you think Education is expensive, just try Ignorance"
"Don't tell people HOW to do things, tell them WHAT you
want and they will surprise you with their ingenuity."
Gen George Patton
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 20:22 ` Doug Thompson
@ 2005-10-27 6:23 ` Sander
2005-10-27 16:59 ` Roger Heflin
2005-10-27 16:50 ` Roger Heflin
1 sibling, 1 reply; 62+ messages in thread
From: Sander @ 2005-10-27 6:23 UTC (permalink / raw)
To: Doug Thompson; +Cc: linux-kernel
(Cc: trimmed)
Doug Thompson wrote (ao):
> --- Sander <sander@humilis.net> wrote:
> > Doug Thompson wrote (ao):
> > > This bridge is either having a parity error on
> > > the main bus OR more likely is generating false
> > > positives. How to determine which? More investigation
> > > is needed.
> >
> > Anything I can do?
>
> To help? Keep an eye for other devices which post
> parity errors.
Ok :-) But you also say more investigation is needed. Is this something
I can help with, as an owner of this hardware?
And is there an EDAC list which reports should go to or is lkml fine?
There is no MAINTAINERS entry or info in Documentation (in
2.6.14-rc4-mm1).
If not, is it useful if I make a website and collect reports?
> > If so, does it make more sense not to configure EDAC?
>
> depends on your requirements.
>
> we have been living with systems with PCI devices for
> a decade now. how many times have events occurred that
> had no explaination and are simply dismissed? There
> were no detectors.
>
> We assume many things, even today. How many desktops
> with gigs of memory have no ECC? I have learned my
> lesson while refactoring bluesmoke/edac that ECC is
> very important. ECC always in my machines for now on,
> for me anyway.
>
> For PCI devices, if you want to "know" data is being
> transmitted correctly, then there needs to be
> "detector" and "reporter" and "handler" agents of this
> bad events to properly notice, report and process
> them.
I'd better configure EDAC :-)
Thanks for your answers Doug.
--
Humilis IT Services and Solutions
http://www.humilis.net
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1 crypto issues (was Re: intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1
2005-10-25 14:07 ` Valdis.Kletnieks
@ 2005-10-27 8:07 ` Valdis.Kletnieks
0 siblings, 0 replies; 62+ messages in thread
From: Valdis.Kletnieks @ 2005-10-27 8:07 UTC (permalink / raw)
To: Andrew Morton, Nicolas Pitre; +Cc: linux-kernel, Laurent Riffard
[-- Attachment #1: Type: text/plain, Size: 892 bytes --]
I finally tracked down the root cause of the hangs - I had applied the modsign
patches from the Fedora kernel, and hit several bugs.
1) The hangs in modprobe were caused by a bug in RedHat code (a function returned
a bum pointer instead of NULL, and things went pear-shaped). I've reported this
as bug 171835 in RedHat's bugzilla system. Redhat problem, not yours or lkml's.
2) It turns out that the issue in 171835 only bites if other things have already
gone bad. It turns out that a patch in -rc5-mm1 causes the indigestion.
clean-crypto-sha1c-up-a-bit.patch gives the modsign patches indigestion. I'm not
sure why yet, or who's code is busticated. All I've verified for sure is that
modsign allocates a 20-byte buffer, and with the cleanup patch applied, I'm
seeing different values in buffer[12..19].
It's 4AM, and I'm not going to chase this any further until evening. *yawn* ;)
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-24 21:16 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 15:12 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-25 16:13 ` 2.6.14-rc5-mm1 Christoph Hellwig
@ 2005-10-27 15:26 ` Andrew Vasquez
2005-10-27 15:44 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-27 19:02 ` 2.6.14-rc5-mm1 Christoph Hellwig
2 siblings, 2 replies; 62+ messages in thread
From: Andrew Vasquez @ 2005-10-27 15:26 UTC (permalink / raw)
To: Andrew Morton; +Cc: Badari Pulavarty, linux-kernel, linux-scsi
On Mon, 24 Oct 2005, Andrew Morton wrote:
> Badari Pulavarty <pbadari@gmail.com> wrote:
> >
> > On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
> > >
> >
> > I can't seem to keep my AMD64 machine up with 2.6.14-rc5-mm1.
> > Keep running into following. qlogic driver problem ?
>
> I don't know why the qlogic driver has suddenly started doing this - were
> there any earlier messages which might tell us? Is it possible to increase
> the debugging level?
>
> I can spot one bug in there, but the lockup is just a symptom.
>
> There are no qlogic changes in 2.6.14-rc5-mm1.
>
> > Thanks,
> > Badari
> >
> > NMI Watchdog detected LOCKUP on CPU 0
> > CPU 0
> > Modules linked in: qlogicfc qla2300 qla2200 qla2xxx firmware_class
qlogicfc attaches to both 2100 and 2200 ISPs. It seems you're then
trying to load qla2xxx driver along with the 2300 and 2200 firmware
loader modules. The pci_request_regions() call during 2200 probing
fails.
> > <ffffffff8010dd2e>{system_call+12 6}
>
> qla2x00_probe_one() has called qla2x00_free_device() and
> qla2x00_free_device() has locked up in
> wait_for_completion(&ha->dpc_exited);
>
> Presumably, ha->dpc_exited is not initialised yet.
>
Causing this cleanup badness.
> The first `goto probe_failed' in qla2x00_probe_one() will cause
> qla2x00_free_device() to run wait_for_completion() against an uninitialised
> completion struct. Because ha->dpc_pid will be >= 0.
>
> This patch might fix the lockup, but if so, qla2x00_iospace_config()
> failed. Please debug that a bit for us?
Badari, is there some reason you are using qlogicfc? THe qla2xxx
driver supports all QLogic ISP parts.
> Andrew, this driver should be converted to use the kthread API - using
> kill_proc() from within a driver to terminate a kernel thread is kinda
> gross.
I'll look into this as well
Thanks,
Andrew Vasquez
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-27 15:26 ` 2.6.14-rc5-mm1 Andrew Vasquez
@ 2005-10-27 15:44 ` Badari Pulavarty
2005-10-27 16:48 ` 2.6.14-rc5-mm1 Andrew Vasquez
2005-10-27 19:02 ` 2.6.14-rc5-mm1 Christoph Hellwig
1 sibling, 1 reply; 62+ messages in thread
From: Badari Pulavarty @ 2005-10-27 15:44 UTC (permalink / raw)
To: Andrew Vasquez; +Cc: Andrew Morton, lkml, linux-scsi
On Thu, 2005-10-27 at 08:26 -0700, Andrew Vasquez wrote:
> On Mon, 24 Oct 2005, Andrew Morton wrote:
>
> > Badari Pulavarty <pbadari@gmail.com> wrote:
> > >
> > > On Mon, 2005-10-24 at 01:48 -0700, Andrew Morton wrote:
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc5/2.6.14-rc5-mm1/
> > > >
> > >
> > > I can't seem to keep my AMD64 machine up with 2.6.14-rc5-mm1.
> > > Keep running into following. qlogic driver problem ?
> >
> > I don't know why the qlogic driver has suddenly started doing this - were
> > there any earlier messages which might tell us? Is it possible to increase
> > the debugging level?
> >
> > I can spot one bug in there, but the lockup is just a symptom.
> >
> > There are no qlogic changes in 2.6.14-rc5-mm1.
> >
> > > Thanks,
> > > Badari
> > >
> > > NMI Watchdog detected LOCKUP on CPU 0
> > > CPU 0
> > > Modules linked in: qlogicfc qla2300 qla2200 qla2xxx firmware_class
>
>
> qlogicfc attaches to both 2100 and 2200 ISPs. It seems you're then
> trying to load qla2xxx driver along with the 2300 and 2200 firmware
> loader modules. The pci_request_regions() call during 2200 probing
> fails.
Hmm. This is happening because I have both qlogicfc and qla2200 as
modules ?
>
> > > <ffffffff8010dd2e>{system_call+12 6}
> >
> > qla2x00_probe_one() has called qla2x00_free_device() and
> > qla2x00_free_device() has locked up in
> > wait_for_completion(&ha->dpc_exited);
> >
> > Presumably, ha->dpc_exited is not initialised yet.
> >
>
> Causing this cleanup badness.
>
> > The first `goto probe_failed' in qla2x00_probe_one() will cause
> > qla2x00_free_device() to run wait_for_completion() against an uninitialised
> > completion struct. Because ha->dpc_pid will be >= 0.
> >
> > This patch might fix the lockup, but if so, qla2x00_iospace_config()
> > failed. Please debug that a bit for us?
>
> Badari, is there some reason you are using qlogicfc? THe qla2xxx
> driver supports all QLogic ISP parts.
Not intentionally. I have qla2200, qla2300 cards in my machine.
I build all the qlogic drivers as modules.
I hate to admit it - but I do use modules for qlogic disks.
I can't seem to compile the qlogic drivers (2200, 2300) into the
kernel and boot without problems (consistently on all my machines
- I run into few issues):
(1) Between kernels, sometimes probing order changes and my local
disks get probed last and screws up my boot process - I don't
think this is a qlogic problem.
(2) Sometimes, one of the driver complains something like
"PCI region already in use" and hangs on boot.
BTW, (2) happens even if its modules and I can't boot my
machine. Sometimes I had to boot with old kernel and hide
the modules - so boot process can't find them to workaround
the problem.
Is there a "dont-load-modules" option or don't load a specific
module option on boot ?
Thanks,
Badari
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-27 15:44 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-27 16:48 ` Andrew Vasquez
0 siblings, 0 replies; 62+ messages in thread
From: Andrew Vasquez @ 2005-10-27 16:48 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: Linux-SCSI Mailing List, Linux Kernel Mailing List
On Thu, 27 Oct 2005, Badari Pulavarty wrote:
> On Thu, 2005-10-27 at 08:26 -0700, Andrew Vasquez wrote:
> > qlogicfc attaches to both 2100 and 2200 ISPs. It seems you're then
> > trying to load qla2xxx driver along with the 2300 and 2200 firmware
> > loader modules. The pci_request_regions() call during 2200 probing
> > fails.
>
> Hmm. This is happening because I have both qlogicfc and qla2200 as
> modules ?
Yes. You don't need (unless there is a compeling reason) to compile
qlogicfc (CONFIG_SCSI_QLOGIC_FC) as the qla2xxx driver along with the
2200 and 2300 firmware mofules:
CONFIG_SCSI_QLA2XXX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
will be fine.
> > Badari, is there some reason you are using qlogicfc? THe qla2xxx
> > driver supports all QLogic ISP parts.
>
> Not intentionally. I have qla2200, qla2300 cards in my machine.
> I build all the qlogic drivers as modules.
Could you send me your .config file? I have a fealing you have and
entry similar to the following:
CONFIG_SCSI_QLOGIC_FC=m
in there. Don't compile the qlogicfc driver.
> I hate to admit it - but I do use modules for qlogic disks.
Thats fine.
> I can't seem to compile the qlogic drivers (2200, 2300) into the
> kernel and boot without problems (consistently on all my machines
> - I run into few issues):
>
> (1) Between kernels, sometimes probing order changes and my local
> disks get probed last and screws up my boot process - I don't
> think this is a qlogic problem.
Not sure there, but the removal of the qlogicfc driver could help
clear up some of the noise, like...
> (2) Sometimes, one of the driver complains something like
> "PCI region already in use" and hangs on boot.
this. the qlogicfc driver is being loaded before qla2xxx and the
supporting 2200 firmware module.
> BTW, (2) happens even if its modules and I can't boot my
> machine. Sometimes I had to boot with old kernel and hide
> the modules - so boot process can't find them to workaround
> the problem.
>
> Is there a "dont-load-modules" option or don't load a specific
> module option on boot ?
--
Andrew Vasquez
^ permalink raw reply [flat|nested] 62+ messages in thread
* RE: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-26 20:22 ` Doug Thompson
2005-10-27 6:23 ` Sander
@ 2005-10-27 16:50 ` Roger Heflin
1 sibling, 0 replies; 62+ messages in thread
From: Roger Heflin @ 2005-10-27 16:50 UTC (permalink / raw)
To: 'Doug Thompson', sander
Cc: linux-kernel, sander, 'Avuton Olrich',
'Andrew Morton'
> depends on your requirements.
>
> we have been living with systems with PCI devices for a
> decade now. how many times have events occurred that had no
> explaination and are simply dismissed? There were no detectors.
>
> We assume many things, even today. How many desktops with
> gigs of memory have no ECC? I have learned my lesson while
> refactoring bluesmoke/edac that ECC is very important. ECC
> always in my machines for now on, for me anyway.
The bigger question is how many machines have ecc but no one is
watching it for errors of any sort, the answer for this question
is almost all. On opteron's mcelog does a decent job of alerting
people to memory issues, but not even all Enterprise distributions
include mcelog, but on the Xeons there is almost nothing
warning any of ecc failures, unless someone checks the bios event
logs on the few machinces that work, and this is fairly difficult,
so almost no one does.
>
> For PCI devices, if you want to "know" data is being
> transmitted correctly, then there needs to be "detector" and
> "reporter" and "handler" agents of this bad events to
> properly notice, report and process them.
And there are other PCI cards/motherboards that have timing issues
also, I know because I have personally found and debugged a
couple of them, one was nasty enough that it corrupted data on every
5-10GB of reads, and it was *ALL* motherboards of this type with a
certain given card running at 133mhz. With a different manufacturer's
similar card it crashed with a MTBF of about when one would expect corrupted
data.
Roger
^ permalink raw reply [flat|nested] 62+ messages in thread
* RE: EDAC (was: Re: 2.6.14-rc5-mm1)
2005-10-27 6:23 ` Sander
@ 2005-10-27 16:59 ` Roger Heflin
0 siblings, 0 replies; 62+ messages in thread
From: Roger Heflin @ 2005-10-27 16:59 UTC (permalink / raw)
To: sander; +Cc: linux-kernel
> Ok :-) But you also say more investigation is needed. Is
> this something I can help with, as an owner of this hardware?
You might try something like HPL or some other benchmark that validates
its results, I have found that if you have PCI parity errors, even
potentially
on cards that the benchmark should not be using, it will usually cause
invalid results in the benchmark when it is ran over several days.
This is even worse if the benchmark is using an interconnect board with
a lot of its communication going across the board.
>
> And is there an EDAC list which reports should go to or is lkml fine?
> There is no MAINTAINERS entry or info in Documentation (in
> 2.6.14-rc4-mm1).
>
Lists.sourceforge.net
Search for bluesmoke, the original name. It may be in the process
of being changed to EDAC.
>
> I'd better configure EDAC :-)
>
> Thanks for your answers Doug.
If you have ECC ram, just the ECC monitoring is important enough
even without the PCI parity stuff working.
Roger
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-27 15:26 ` 2.6.14-rc5-mm1 Andrew Vasquez
2005-10-27 15:44 ` 2.6.14-rc5-mm1 Badari Pulavarty
@ 2005-10-27 19:02 ` Christoph Hellwig
2005-10-27 21:53 ` 2.6.14-rc5-mm1 Andrew Vasquez
1 sibling, 1 reply; 62+ messages in thread
From: Christoph Hellwig @ 2005-10-27 19:02 UTC (permalink / raw)
To: Andrew Vasquez; +Cc: Andrew Morton, Badari Pulavarty, linux-kernel, linux-scsi
On Thu, Oct 27, 2005 at 08:26:37AM -0700, Andrew Vasquez wrote:
> qlogicfc attaches to both 2100 and 2200 ISPs. It seems you're then
> trying to load qla2xxx driver along with the 2300 and 2200 firmware
> loader modules. The pci_request_regions() call during 2200 probing
> fails.
Btw, now that devfs is gone and thus DaveM's host renumbering issues
are modd we'd like to kill qlogicfc. I vaguely remember people complaing
qla2xxx made trouble on qla2100 hardware. Andrew do you have any success
or error reports for that hardware?
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1 - ide-cs broken!
2005-10-25 23:49 ` 2.6.14-rc5-mm1 - ide-cs, pcmcia ioctl Damir Perisa
@ 2005-10-27 21:31 ` Damir Perisa
2005-10-27 22:03 ` Andrew Morton
0 siblings, 1 reply; 62+ messages in thread
From: Damir Perisa @ 2005-10-27 21:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 156 bytes --]
isn't anybody else using ide-cs? i feel lonely!
greetings,
Damir
--
Oh this age! How tasteless and ill-bred it is.
-- Gaius Valerius Catullus
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1
2005-10-27 19:02 ` 2.6.14-rc5-mm1 Christoph Hellwig
@ 2005-10-27 21:53 ` Andrew Vasquez
2005-10-28 22:51 ` HEADS UP for QLA2100 users Christoph Hellwig
0 siblings, 1 reply; 62+ messages in thread
From: Andrew Vasquez @ 2005-10-27 21:53 UTC (permalink / raw)
To: Christoph Hellwig, Andrew Morton, Badari Pulavarty, linux-kernel,
linux-scsi
On Thu, 27 Oct 2005, Christoph Hellwig wrote:
> On Thu, Oct 27, 2005 at 08:26:37AM -0700, Andrew Vasquez wrote:
> > qlogicfc attaches to both 2100 and 2200 ISPs. It seems you're then
> > trying to load qla2xxx driver along with the 2300 and 2200 firmware
> > loader modules. The pci_request_regions() call during 2200 probing
> > fails.
>
> Btw, now that devfs is gone and thus DaveM's host renumbering issues
> are modd we'd like to kill qlogicfc. I vaguely remember people complaing
> qla2xxx made trouble on qla2100 hardware. Andrew do you have any success
> or error reports for that hardware?
A couple of months ago I had worked with a 2100 user who was having
some serious problems within a configuration. I was able to reproduce
something similar in-house and (to make a long-story, short), it turns
out there are some error-recovery problems in the firmware version
currently shipping in qla2xxx (1.19.25 TP firmware to be exact).
After numerous trial and error efforts, we were able to find a
reasonbly stable release with which the customer's configuration could
recover and run (1.17.38 EF, quite old).
In any case, formally, QLogic has dropped *all* support for ISP2100
cards, and thus, it's quite difficult to get any type of traction
from the firmware folk to begin to root-cause the failures.
I'm still in the process of ironing out the .bin distribution details
locally, but perhaps once we migrate to firmware-loading exclusively
via request_firmware(), the (small?) contigent of 2100 could use the
EF variant I referenced above.
Could I get another informal count of 2100 users who are still having
problems with qla2xxx?
Regards,
Andrew Vasquez
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1 - ide-cs broken!
2005-10-27 21:31 ` 2.6.14-rc5-mm1 - ide-cs broken! Damir Perisa
@ 2005-10-27 22:03 ` Andrew Morton
2005-10-27 23:18 ` Damir Perisa
0 siblings, 1 reply; 62+ messages in thread
From: Andrew Morton @ 2005-10-27 22:03 UTC (permalink / raw)
To: Damir Perisa; +Cc: linux-kernel
Damir Perisa <damir.perisa@solnet.ch> wrote:
>
> isn't anybody else using ide-cs? i feel lonely!
>
That's called "stunned silence".
> booting the fresh kernel26mm, i ran into a problem with ide-cs:
>
> info while booting / start of hotplug:
> Oct 26 01:02:28 localhost kernel: [17179579.008000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0185]
> Oct 26 01:02:28 localhost kernel: [17179579.160000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
> Oct 26 01:02:28 localhost kernel: [17179579.184000] Socket status: 30000006
> Oct 26 01:02:28 localhost kernel: [17179579.208000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
> Oct 26 01:02:28 localhost kernel: [17179579.232000] cs: IO port probe 0x4000-0x8fff: clean.
> Oct 26 01:02:28 localhost kernel: [17179579.256000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
> Oct 26 01:02:28 localhost kernel: [17179579.280000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf80fffff
>
> when i plug in the pcmcia-compact-flash adapter into the laptop:
> Oct 26 01:05:10 localhost kernel: [17179767.840000] cs: memory probe 0xf0000000-0xf80fffff: excluding 0xf0000000-0xf87fffff
> Oct 26 01:05:11 localhost kernel: [17179767.924000] ide_cs: Unknown symbol cs_error
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_deregister_client
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_first_tuple
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_unregister_driver
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_tuple_data
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_next_tuple
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_register_client
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_get_configuration_info
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_request_io
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_request_configuration
> Oct 26 01:05:11 localhost kernel: [17179767.928000] ide_cs: Unknown symbol pcmcia_release_configuration
>
I'd have thought this was basically impossible. It's saying that
drivers/pcmcia/ds.c isn't present. What's the setting of CONFIG_PCMCIA in
your .config?
Perhaps the modprobe dependencies are screwed up. Try modprobing pcmcia.o
by hand before inserting the card?
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1 - ide-cs broken!
2005-10-27 22:03 ` Andrew Morton
@ 2005-10-27 23:18 ` Damir Perisa
0 siblings, 0 replies; 62+ messages in thread
From: Damir Perisa @ 2005-10-27 23:18 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Le Friday 28 October 2005 00:03, Andrew Morton a écrit :
| Damir Perisa <damir.perisa@solnet.ch> wrote:
| > isn't anybody else using ide-cs? i feel lonely!
|
| That's called "stunned silence".
ah ... then it's ok ;-)
| | [...]
|
| I'd have thought this was basically impossible. It's saying that
| drivers/pcmcia/ds.c isn't present. What's the setting of
| CONFIG_PCMCIA in your .config?
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_PCMCIA_PROBE=y
all other PCMCIA are modules ( =m)
| Perhaps the modprobe dependencies are screwed up. Try modprobing
| pcmcia.o by hand before inserting the card?
[17194333.620000] cs: memory probe 0xf0000000-0xf80fffff: excluding
0xf0000000-0xf87fffff
[17194333.644000] pcmcia: Detected deprecated PCMCIA ioctl usage.
[17194333.644000] pcmcia: This interface will soon be removed from the
kernel; please expect breakage unless you upgrade to new tools.
[17194333.644000] pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
[17194334.032000] Probing IDE interface ide2...
[17194334.320000] hde: 1024MB Flash Card, CFA DISK drive
[17194334.992000] ide2 at 0x4100-0x4107,0x410e on irq 3
[17194334.992000] hde: max request size: 128KiB
[17194334.992000] hde: 2001888 sectors (1024 MB) w/1KiB Cache,
CHS=1986/16/63
[17194334.992000] hde: cache flushes not supported
[17194334.992000] hde: hde1
[17194335.004000] ide-cs: hde: Vcc = 3.3, Vpp = 0.0
[17194335.224000] hde: hde1
[17194335.632000] hde: hde1
[17194335.736000] hde: hde1
[17194335.744000] hde: hde1
... ("hde: hde1" repeating)...
ok, now the situation is less lethal, but still no proper ide-cs working.
there are no unknown symbols now, but the other output in dmesg is the
same. especially, the loop to output "hde: hde1" is here, but if i remove
the card, it stops and the system is still responsible.
i checked something i forgot to check before... is the hde device seen
in /sys somewhere, when the card is plugged in. the answer is yes!:
/sys/block/hde/hde1/
presents itself fully normal like other ide drives. in
/sys/block/hde/hde1/sample.sh
i found "mknod /dev/hde1 b 33 1" and tried to run it. successfully!
the result is: in dmesg, the "hde: hde1" output loop stopped and my card
is working again!!!
so the trouble seems not only (or not at all) related to the kernel but
(also) to udev (i use 071), hotplug (mine is 2004_09_23), pcmciautils
(010) or something else.
can somebody tell me, what state of this process (discovering device,
loading needed modules, udev creating node under /dev) is the output
"hde: hde1" to dmesg and how can it be possible that it loops?
it seems that this chain of processing is stuck somewhere and needs a
execution of the command to create the node under /dev by hand to finish.
please anybody around with more experience with this systems help or
suggest where to search.
thank you in advance + greetings,
Damir
--
Penicillin doesn't kill bacteria. Technically, it keeps it from
reproducing.
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1: EDAC: several options without a help text
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (10 preceding siblings ...)
2005-10-25 23:49 ` 2.6.14-rc5-mm1 - ide-cs, pcmcia ioctl Damir Perisa
@ 2005-10-28 17:58 ` Adrian Bunk
2005-10-31 15:26 ` Alan Cox
2005-10-29 19:46 ` 2.6.14-rc5-mm1: reiser4: ICE with gcc 2.95 Adrian Bunk
` (5 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-10-28 17:58 UTC (permalink / raw)
To: Andrew Morton, Alan Cox; +Cc: linux-kernel
Hi Alan,
the hardware-specific EDAC drivers don't have a help text.
Can you add help texts?
TIA
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* HEADS UP for QLA2100 users
2005-10-27 21:53 ` 2.6.14-rc5-mm1 Andrew Vasquez
@ 2005-10-28 22:51 ` Christoph Hellwig
2005-10-28 23:03 ` Andrew Vasquez
0 siblings, 1 reply; 62+ messages in thread
From: Christoph Hellwig @ 2005-10-28 22:51 UTC (permalink / raw)
To: Andrew Vasquez; +Cc: Andrew Morton, linux-kernel, linux-scsi
On Thu, Oct 27, 2005 at 02:53:13PM -0700, Andrew Vasquez wrote:
> After numerous trial and error efforts, we were able to find a
> reasonbly stable release with which the customer's configuration could
> recover and run (1.17.38 EF, quite old).
>
> In any case, formally, QLogic has dropped *all* support for ISP2100
> cards, and thus, it's quite difficult to get any type of traction
> from the firmware folk to begin to root-cause the failures.
Sure. We're all very happy that you invest time to help these users
anyway, and will allow us to get rid of one more unmaintained driver.
> I'm still in the process of ironing out the .bin distribution details
> locally, but perhaps once we migrate to firmware-loading exclusively
> via request_firmware(), the (small?) contigent of 2100 could use the
> EF variant I referenced above.
You know, I'm in favour of getting firmware images in the kernel image,
but what's the problem of simply downgrading the 2100 firmware until
we get rid of the builtin firmware for all qla2xxx variants?
> Could I get another informal count of 2100 users who are still having
> problems with qla2xxx?
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: HEADS UP for QLA2100 users
2005-10-28 22:51 ` HEADS UP for QLA2100 users Christoph Hellwig
@ 2005-10-28 23:03 ` Andrew Vasquez
2005-10-28 23:35 ` Badari Pulavarty
0 siblings, 1 reply; 62+ messages in thread
From: Andrew Vasquez @ 2005-10-28 23:03 UTC (permalink / raw)
To: Christoph Hellwig, Andrew Morton, linux-kernel, linux-scsi
On Fri, 28 Oct 2005, Christoph Hellwig wrote:
> On Thu, Oct 27, 2005 at 02:53:13PM -0700, Andrew Vasquez wrote:
>
> > I'm still in the process of ironing out the .bin distribution details
> > locally, but perhaps once we migrate to firmware-loading exclusively
> > via request_firmware(), the (small?) contigent of 2100 could use the
> > EF variant I referenced above.
>
> You know, I'm in favour of getting firmware images in the kernel image,
> but what's the problem of simply downgrading the 2100 firmware until
> we get rid of the builtin firmware for all qla2xxx variants?
I have no problems with submitting 1.17.38 EF for inclusion upstream.
My only hope is that for the (other) 2100 user out there that use the
latest 2100 firmware and are not experiencing problems, the downgrade
does not break anything.
That's another reason I posed the following question:
> > Could I get another informal count of 2100 users who are still having
> > problems with qla2xxx?
Perhaps I should also ask:
Who's running 2100 cards with the latest qla2xxx driver and
are experiencing no problems?
--
AV
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: HEADS UP for QLA2100 users
2005-10-28 23:03 ` Andrew Vasquez
@ 2005-10-28 23:35 ` Badari Pulavarty
2006-02-04 22:58 ` Adrian Bunk
0 siblings, 1 reply; 62+ messages in thread
From: Badari Pulavarty @ 2005-10-28 23:35 UTC (permalink / raw)
To: Andrew Vasquez; +Cc: Christoph Hellwig, Andrew Morton, lkml, linux-scsi
On Fri, 2005-10-28 at 16:03 -0700, Andrew Vasquez wrote:
> On Fri, 28 Oct 2005, Christoph Hellwig wrote:
>
> > On Thu, Oct 27, 2005 at 02:53:13PM -0700, Andrew Vasquez wrote:
> >
> > > I'm still in the process of ironing out the .bin distribution details
> > > locally, but perhaps once we migrate to firmware-loading exclusively
> > > via request_firmware(), the (small?) contigent of 2100 could use the
> > > EF variant I referenced above.
> >
> > You know, I'm in favour of getting firmware images in the kernel image,
> > but what's the problem of simply downgrading the 2100 firmware until
> > we get rid of the builtin firmware for all qla2xxx variants?
>
> I have no problems with submitting 1.17.38 EF for inclusion upstream.
> My only hope is that for the (other) 2100 user out there that use the
> latest 2100 firmware and are not experiencing problems, the downgrade
> does not break anything.
>
> That's another reason I posed the following question:
>
> > > Could I get another informal count of 2100 users who are still having
> > > problems with qla2xxx?
>
> Perhaps I should also ask:
>
> Who's running 2100 cards with the latest qla2xxx driver and
> are experiencing no problems?
Hmm.. I thought qla2xxx driver doesn't like qla2100. I had troubles
getting my qla2100 cards to work with qal2xxx (9 months ago) and
gave up and using only qla2200 and qla2300 card.
Is there a point in me going back and trying qla2100 ? (Ofcourse,
I need to locate those cards).
Thanks,
Badari
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1: reiser4: ICE with gcc 2.95
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (11 preceding siblings ...)
2005-10-28 17:58 ` 2.6.14-rc5-mm1: EDAC: several options without a help text Adrian Bunk
@ 2005-10-29 19:46 ` Adrian Bunk
2005-10-29 19:59 ` 2.6.14-rc5-mm1: SAS: compile error " Adrian Bunk
` (4 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Adrian Bunk @ 2005-10-29 19:46 UTC (permalink / raw)
To: Andrew Morton, reiserfs-dev; +Cc: linux-kernel
Trying to compile 2.6.14-rc5-mm1 with gcc 2.95 and
CONFIG_REISER4_DEBUG=y results in the following ICE:
<-- snip -->
...
CC fs/reiser4/plugin/space/bitmap.o
fs/reiser4/plugin/space/bitmap.c: In function `parse_blocknr':
fs/reiser4/plugin/space/bitmap.c:608: Internal compiler error:
fs/reiser4/plugin/space/bitmap.c:608: internal error--unrecognizable
insn:
(insn 93 266 269 (parallel[
(set (reg:SI 0 %eax)
(asm_operands ("") ("=a") 0[
(reg:DI 1 %edx)
]
[
(asm_input:DI ("A"))
] ("fs/reiser4/plugin/space/bitmap.c") 603))
(set (reg:SI 1 %edx)
(asm_operands ("") ("=d") 1[
(reg:DI 1 %edx)
]
[
(asm_input:DI ("A"))
] ("fs/reiser4/plugin/space/bitmap.c") 603))
] ) -1 (insn_list 83 (nil))
(nil))
make[2]: *** [fs/reiser4/plugin/space/bitmap.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
<-- snip -->
Although this is technically an error in gcc 2.95, the code should be
fixed to work around this issue since gcc 2.95 is a supported compiler
for compiling kernel 2.6.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* 2.6.14-rc5-mm1: SAS: compile error with gcc 2.95
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (12 preceding siblings ...)
2005-10-29 19:46 ` 2.6.14-rc5-mm1: reiser4: ICE with gcc 2.95 Adrian Bunk
@ 2005-10-29 19:59 ` Adrian Bunk
2005-10-29 20:15 ` Luben Tuikov
2005-10-29 20:48 ` [-mm patch] EDAC drivers: missing PCI dependencies Adrian Bunk
` (3 subsequent siblings)
17 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-10-29 19:59 UTC (permalink / raw)
To: Andrew Morton, Luben Tuikov; +Cc: linux-kernel, linux-scsi
On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.14-rc4-mm1:
>...
> git-sas.patch
>...
> Subsystem trees
>...
This gives the following compile error with gcc 2.95:
<-- snip -->
...
CC drivers/scsi/aic94xx/aic94xx_init.o
In file included from include/scsi/sas/sas.h:90,
from include/scsi/sas/sas_class.h:33,
from include/scsi/sas/sas_discover.h:29,
from drivers/scsi/aic94xx/aic94xx.h:33,
from drivers/scsi/aic94xx/aic94xx_init.c:36:
include/scsi/sas/sas_frames.h:46: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames.h:47: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames.h:55: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames.h:70: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames.h:71: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames.h:79: warning: unnamed struct/union that defines no instances
In file included from include/scsi/sas/sas_frames.h:90,
from include/scsi/sas/sas.h:90,
from include/scsi/sas/sas_class.h:33,
from include/scsi/sas/sas_discover.h:29,
from drivers/scsi/aic94xx/aic94xx.h:33,
from drivers/scsi/aic94xx/aic94xx_init.c:36:
include/scsi/sas/sas_frames_le.h:51: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames_le.h:53: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames_le.h:63: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames_le.h:65: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_frames_le.h:219: warning: unnamed struct/union that defines no instances
In file included from drivers/scsi/aic94xx/aic94xx.h:33,
from drivers/scsi/aic94xx/aic94xx_init.c:36:
include/scsi/sas/sas_discover.h:157: warning: unnamed struct/union that defines no instances
include/scsi/sas/sas_discover.h: In function `sas_init_dev':
include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
In file included from drivers/scsi/aic94xx/aic94xx_hwi.h:36,
from drivers/scsi/aic94xx/aic94xx_reg.h:32,
from drivers/scsi/aic94xx/aic94xx_init.c:37:
drivers/scsi/aic94xx/aic94xx_sas.h: At top level:
drivers/scsi/aic94xx/aic94xx_sas.h:363: warning: unnamed struct/union that defines no instances
drivers/scsi/aic94xx/aic94xx_sas.h:643: warning: unnamed struct/union that defines no instances
make[3]: *** [drivers/scsi/aic94xx/aic94xx_init.o] Error 1
<-- snip -->
Since gcc 2.95 is a supported compiler for 2.6, the code has to be
changed to compile with gcc 2.95.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1: SAS: compile error with gcc 2.95
2005-10-29 19:59 ` 2.6.14-rc5-mm1: SAS: compile error " Adrian Bunk
@ 2005-10-29 20:15 ` Luben Tuikov
0 siblings, 0 replies; 62+ messages in thread
From: Luben Tuikov @ 2005-10-29 20:15 UTC (permalink / raw)
To: Adrian Bunk, Andrew Morton, Luben Tuikov; +Cc: linux-kernel, linux-scsi
--- Adrian Bunk <bunk@stusta.de> wrote:
> On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.14-rc4-mm1:
> >...
> > git-sas.patch
> >...
> > Subsystem trees
> >...
>
> This gives the following compile error with gcc 2.95:
>
> <-- snip -->
>
> ...
> CC drivers/scsi/aic94xx/aic94xx_init.o
> In file included from include/scsi/sas/sas.h:90,
> from include/scsi/sas/sas_class.h:33,
> from include/scsi/sas/sas_discover.h:29,
> from drivers/scsi/aic94xx/aic94xx.h:33,
> from drivers/scsi/aic94xx/aic94xx_init.c:36:
> include/scsi/sas/sas_frames.h:46: warning: unnamed struct/union that defines
> no instances
> include/scsi/sas/sas_frames.h:47: warning: unnamed struct/union that defines
> no instances
> include/scsi/sas/sas_frames.h:55: warning: unnamed struct/union that defines
> no instances
> include/scsi/sas/sas_frames.h:70: warning: unnamed struct/union that defines
> no instances
> include/scsi/sas/sas_frames.h:71: warning: unnamed struct/union that defines
> no instances
> include/scsi/sas/sas_frames.h:79: warning: unnamed struct/union that defines
> no instances
> In file included from include/scsi/sas/sas_frames.h:90,
> from include/scsi/sas/sas.h:90,
> from include/scsi/sas/sas_class.h:33,
> from include/scsi/sas/sas_discover.h:29,
> from drivers/scsi/aic94xx/aic94xx.h:33,
> from drivers/scsi/aic94xx/aic94xx_init.c:36:
> include/scsi/sas/sas_frames_le.h:51: warning: unnamed struct/union that
> defines no instances
> include/scsi/sas/sas_frames_le.h:53: warning: unnamed struct/union that
> defines no instances
> include/scsi/sas/sas_frames_le.h:63: warning: unnamed struct/union that
> defines no instances
> include/scsi/sas/sas_frames_le.h:65: warning: unnamed struct/union that
> defines no instances
> include/scsi/sas/sas_frames_le.h:219: warning: unnamed struct/union that
> defines no instances
> In file included from drivers/scsi/aic94xx/aic94xx.h:33,
> from drivers/scsi/aic94xx/aic94xx_init.c:36:
> include/scsi/sas/sas_discover.h:157: warning: unnamed struct/union that
> defines no instances
> include/scsi/sas/sas_discover.h: In function `sas_init_dev':
> include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
> include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
> include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
> include/scsi/sas/sas_discover.h:201: structure has no member named `end_dev'
> include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
> include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
> include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
> include/scsi/sas/sas_discover.h:205: structure has no member named `ex_dev'
> include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
> include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
> include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
> include/scsi/sas/sas_discover.h:210: structure has no member named `sata_dev'
> In file included from drivers/scsi/aic94xx/aic94xx_hwi.h:36,
> from drivers/scsi/aic94xx/aic94xx_reg.h:32,
> from drivers/scsi/aic94xx/aic94xx_init.c:37:
> drivers/scsi/aic94xx/aic94xx_sas.h: At top level:
> drivers/scsi/aic94xx/aic94xx_sas.h:363: warning: unnamed struct/union that
> defines no instances
> drivers/scsi/aic94xx/aic94xx_sas.h:643: warning: unnamed struct/union that
> defines no instances
> make[3]: *** [drivers/scsi/aic94xx/aic94xx_init.o] Error 1
>
> <-- snip -->
>
> Since gcc 2.95 is a supported compiler for 2.6, the code has to be
> changed to compile with gcc 2.95.
Yes, I've been meaning to add names to unions to fix compilation with
gcc 2.95 for some time now. Andrew has pointed that out to me before.
I'll submit a patch shortly.
Luben
--
http://linux.adaptec.com/sas/
http://www.adaptec.com/sas/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [-mm patch] EDAC drivers: missing PCI dependencies
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (13 preceding siblings ...)
2005-10-29 19:59 ` 2.6.14-rc5-mm1: SAS: compile error " Adrian Bunk
@ 2005-10-29 20:48 ` Adrian Bunk
2005-10-30 15:53 ` [-mm patch] fs/namei.c: make path_lookup_create() static Adrian Bunk
` (2 subsequent siblings)
17 siblings, 0 replies; 62+ messages in thread
From: Adrian Bunk @ 2005-10-29 20:48 UTC (permalink / raw)
To: Andrew Morton, Alan Cox; +Cc: linux-kernel
This patch fixes the following compile errors with CONFIG_PCI=n:
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `amd76x_probe1':
amd76x_edac.c:(.text+0x56dc56): undefined reference to `pci_dev_get'
drivers/built-in.o: In function `e752x_probe1':
e752x_edac.c:(.text+0x56f152): undefined reference to `pci_scan_single_device'
e752x_edac.c:(.text+0x56f330): undefined reference to `pci_dev_get'
drivers/built-in.o: In function `i82875p_probe1':
i82875p_edac.c:(.text+0x56f6b4): undefined reference to `pci_scan_single_device'
i82875p_edac.c:(.text+0x56f6dd): undefined reference to `pci_release_regions'
i82875p_edac.c:(.text+0x56f6ef): undefined reference to `pci_proc_attach_device'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.14-rc5-mm1/drivers/edac/Kconfig.old 2005-10-29 22:42:51.000000000 +0200
+++ linux-2.6.14-rc5-mm1/drivers/edac/Kconfig 2005-10-29 22:44:22.000000000 +0200
@@ -43,7 +43,7 @@
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
- depends on EDAC
+ depends on EDAC && PCI
config EDAC_E7XXX
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
@@ -51,11 +51,11 @@
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320)"
- depends on EDAC
+ depends on EDAC && PCI
config EDAC_I82875P
tristate "Intel 82875p (D82875P, E7210)"
- depends on EDAC
+ depends on EDAC && PCI
config EDAC_I82860
tristate "Intel 82860"
^ permalink raw reply [flat|nested] 62+ messages in thread
* [-mm patch] fs/namei.c: make path_lookup_create() static
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (14 preceding siblings ...)
2005-10-29 20:48 ` [-mm patch] EDAC drivers: missing PCI dependencies Adrian Bunk
@ 2005-10-30 15:53 ` Adrian Bunk
2005-10-30 15:58 ` Trond Myklebust
2005-11-02 0:53 ` [-mm patch] fix NET_RADIO=n, IEEE80211=y compile Adrian Bunk
2005-11-02 16:24 ` [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info Adrian Bunk
17 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-10-30 15:53 UTC (permalink / raw)
To: Andrew Morton, trond.myklebust; +Cc: linux-kernel
On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.14-rc4-mm1:
>...
> git-nfs.patch
>...
> Subsystem trees
>...
<-- snip -->
This patch makes the needlessly global function path_lookup_create()
static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.14-rc5-mm1-full/fs/namei.c.old 2005-10-30 16:24:01.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/fs/namei.c 2005-10-30 16:24:25.000000000 +0100
@@ -1109,8 +1109,9 @@
* @open_flags: open intent flags
* @create_mode: create intent flags
*/
-int path_lookup_create(const char *name, unsigned int lookup_flags,
- struct nameidata *nd, int open_flags, int create_mode)
+static int path_lookup_create(const char *name, unsigned int lookup_flags,
+ struct nameidata *nd, int open_flags,
+ int create_mode)
{
return __path_lookup_intent_open(name, lookup_flags|LOOKUP_CREATE, nd,
open_flags, create_mode);
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [-mm patch] fs/namei.c: make path_lookup_create() static
2005-10-30 15:53 ` [-mm patch] fs/namei.c: make path_lookup_create() static Adrian Bunk
@ 2005-10-30 15:58 ` Trond Myklebust
0 siblings, 0 replies; 62+ messages in thread
From: Trond Myklebust @ 2005-10-30 15:58 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
su den 30.10.2005 klokka 16:53 (+0100) skreiv Adrian Bunk:
> On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
> >...
> > Changes since 2.6.14-rc4-mm1:
> >...
> > git-nfs.patch
> >...
> > Subsystem trees
> >...
>
>
> <-- snip -->
>
>
> This patch makes the needlessly global function path_lookup_create()
> static.
ACK...
Trond
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: 2.6.14-rc5-mm1: EDAC: several options without a help text
2005-10-28 17:58 ` 2.6.14-rc5-mm1: EDAC: several options without a help text Adrian Bunk
@ 2005-10-31 15:26 ` Alan Cox
0 siblings, 0 replies; 62+ messages in thread
From: Alan Cox @ 2005-10-31 15:26 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Gwe, 2005-10-28 at 19:58 +0200, Adrian Bunk wrote:
> Hi Alan,
>
> the hardware-specific EDAC drivers don't have a help text.
>
> Can you add help texts?
Done
Signed-off-by: Alan Cox <alan@redhat.com>
--- drivers/edac/Kconfig~ 2005-10-31 14:49:10.707520192 +0000
+++ drivers/edac/Kconfig 2005-10-31 14:49:10.707520192 +0000
@@ -44,26 +44,44 @@
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
depends on EDAC
+ help
+ Support for error detection and correction on the AMD 76x
+ series of chipsets used with the Athlon processor.
config EDAC_E7XXX
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
depends on EDAC
+ help
+ Support for error detection and correction on the Intel
+ E7205, E7500, E7501 and E7505 server chipsets.
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320)"
depends on EDAC
+ help
+ Support for error detection and correction on the Intel
+ E7520, E7525, E7320 server chipsets.
config EDAC_I82875P
tristate "Intel 82875p (D82875P, E7210)"
depends on EDAC
+ help
+ Support for error detection and correction on the Intel
+ DP82785P and E7210 server chipsets.
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC
+ help
+ Support for error detection and correction on the Intel
+ 82860 chipset.
config EDAC_R82600
tristate "Radisys 82600 embedded chipset"
depends on EDAC
+ help
+ Support for error detection and correction on the Radisys
+ 82600 embedded chipset.
choice
prompt "Error detecting method"
^ permalink raw reply [flat|nested] 62+ messages in thread
* [-mm patch] fix NET_RADIO=n, IEEE80211=y compile
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (15 preceding siblings ...)
2005-10-30 15:53 ` [-mm patch] fs/namei.c: make path_lookup_create() static Adrian Bunk
@ 2005-11-02 0:53 ` Adrian Bunk
2005-11-02 16:24 ` [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info Adrian Bunk
17 siblings, 0 replies; 62+ messages in thread
From: Adrian Bunk @ 2005-11-02 0:53 UTC (permalink / raw)
To: Andrew Morton, jgarzik; +Cc: linux-kernel, netdev
On Mon, Oct 24, 2005 at 01:48:38AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.14-rc4-mm1:
>...
> git-netdev-all.patch
>...
> Subsystem trees
>...
<-- snip -->
This patch fixes the following compile error with CONFIG_NET_RADIO=n and
CONFIG_IEEE80211=y:
LD .tmp_vmlinux1
net/built-in.o: In function `ieee80211_rx':
: undefined reference to `wireless_spy_update'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.14-rc5-mm1-full/net/ieee80211/ieee80211_rx.c.old 2005-11-01 22:17:45.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/net/ieee80211/ieee80211_rx.c 2005-11-01 22:17:01.000000000 +0100
@@ -370,6 +370,7 @@
/* Put this code here so that we avoid duplicating it in all
* Rx paths. - Jean II */
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
+#ifdef CONFIG_NET_RADIO
/* If spy monitoring on */
if (ieee->spy_data.spy_number > 0) {
struct iw_quality wstats;
@@ -396,6 +397,7 @@
/* Update spy records */
wireless_spy_update(ieee->dev, hdr->addr2, &wstats);
}
+#endif /* CONFIG_NET_RADIO */
#endif /* IW_WIRELESS_SPY */
#ifdef NOT_YET
^ permalink raw reply [flat|nested] 62+ messages in thread
* [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
` (16 preceding siblings ...)
2005-11-02 0:53 ` [-mm patch] fix NET_RADIO=n, IEEE80211=y compile Adrian Bunk
@ 2005-11-02 16:24 ` Adrian Bunk
2005-11-02 17:44 ` Alan Cox
17 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2005-11-02 16:24 UTC (permalink / raw)
To: Andrew Morton, Alan Cox; +Cc: linux-kernel
While fixing a compile error with CONFIG_PROC_FS=n in the EDAC code, I
discovered that the proc_ent member of struct mem_ctl_info is only used
in a debug printk.
Is this patch to remove proc_ent OK?
Signed-off-by: Adrian Bunk <bunk@stusta.de>
drivers/edac/edac_mc.c | 8 ++------
drivers/edac/edac_mc.h | 3 ---
2 files changed, 2 insertions(+), 9 deletions(-)
--- linux-2.6.14-rc5-mm1-modular-2.95/drivers/edac/edac_mc.h.old 2005-11-02 02:38:08.000000000 +0100
+++ linux-2.6.14-rc5-mm1-modular-2.95/drivers/edac/edac_mc.h 2005-11-02 02:38:19.000000000 +0100
@@ -313,9 +313,6 @@
const char *mod_ver;
const char *ctl_name;
char proc_name[MC_PROC_NAME_MAX_LEN + 1];
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc_ent;
-#endif
void *pvt_info;
u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
u32 ce_noinfo_count; /* Correctable Errors w/o info */
--- linux-2.6.14-rc5-mm1-modular-2.95/drivers/edac/edac_mc.c.old 2005-11-02 02:38:30.000000000 +0100
+++ linux-2.6.14-rc5-mm1-modular-2.95/drivers/edac/edac_mc.c 2005-11-02 02:39:44.000000000 +0100
@@ -362,8 +362,6 @@
printk(KERN_INFO "\tpdev = %p\n", mci->pdev);
printk(KERN_INFO "\tmod_name:ctl_name = %s:%s\n",
mci->mod_name, mci->ctl_name);
- printk(KERN_INFO "\tproc_name = %s, proc_ent = %p\n",
- mci->proc_name, mci->proc_ent);
printk(KERN_INFO "\tpvt_info = %p\n\n", mci->pvt_info);
}
@@ -575,10 +573,8 @@
goto finish;
}
- mci->proc_ent = create_proc_read_entry(mci->proc_name, 0, proc_mc,
- mc_read_proc, (void *) mci);
-
- if (mci->proc_ent == NULL) {
+ if(create_proc_read_entry(mci->proc_name, 0, proc_mc,
+ mc_read_proc, (void *) mci) == NULL) {
printk(KERN_WARNING
"MC%d: failed to create proc entry for controller\n",
mci->mc_idx);
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info
2005-11-02 16:24 ` [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info Adrian Bunk
@ 2005-11-02 17:44 ` Alan Cox
0 siblings, 0 replies; 62+ messages in thread
From: Alan Cox @ 2005-11-02 17:44 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Mer, 2005-11-02 at 17:24 +0100, Adrian Bunk wrote:
> While fixing a compile error with CONFIG_PROC_FS=n in the EDAC code, I
> discovered that the proc_ent member of struct mem_ctl_info is only used
> in a debug printk.
>
> Is this patch to remove proc_ent OK?
Looks sane to me.
>
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alan Cox <alan@redhat.com>
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: HEADS UP for QLA2100 users
2005-10-28 23:35 ` Badari Pulavarty
@ 2006-02-04 22:58 ` Adrian Bunk
2006-02-14 0:14 ` [2.6 patch] schedule the SCSI qlogicfc driver for removal Adrian Bunk
0 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2006-02-04 22:58 UTC (permalink / raw)
To: Badari Pulavarty
Cc: Andrew Vasquez, Christoph Hellwig, Andrew Morton, lkml,
linux-scsi
On Fri, Oct 28, 2005 at 04:35:43PM -0700, Badari Pulavarty wrote:
> On Fri, 2005-10-28 at 16:03 -0700, Andrew Vasquez wrote:
> > On Fri, 28 Oct 2005, Christoph Hellwig wrote:
> >
> > > On Thu, Oct 27, 2005 at 02:53:13PM -0700, Andrew Vasquez wrote:
> > >
> > > > I'm still in the process of ironing out the .bin distribution details
> > > > locally, but perhaps once we migrate to firmware-loading exclusively
> > > > via request_firmware(), the (small?) contigent of 2100 could use the
> > > > EF variant I referenced above.
> > >
> > > You know, I'm in favour of getting firmware images in the kernel image,
> > > but what's the problem of simply downgrading the 2100 firmware until
> > > we get rid of the builtin firmware for all qla2xxx variants?
> >
> > I have no problems with submitting 1.17.38 EF for inclusion upstream.
> > My only hope is that for the (other) 2100 user out there that use the
> > latest 2100 firmware and are not experiencing problems, the downgrade
> > does not break anything.
> >
> > That's another reason I posed the following question:
> >
> > > > Could I get another informal count of 2100 users who are still having
> > > > problems with qla2xxx?
> >
> > Perhaps I should also ask:
> >
> > Who's running 2100 cards with the latest qla2xxx driver and
> > are experiencing no problems?
>
> Hmm.. I thought qla2xxx driver doesn't like qla2100. I had troubles
> getting my qla2100 cards to work with qal2xxx (9 months ago) and
> gave up and using only qla2200 and qla2300 card.
>
> Is there a point in me going back and trying qla2100 ? (Ofcourse,
> I need to locate those cards).
Now that in 2.6.16-rc the recommended method for firmware loading in
qla2xxx is to load it from userspace, the firmware version problems
should have become non-issues.
If ypu have hardware that works in 2.6.16-rc2 with the qlogicfc driver
but not with the qal2xxx driver, a bug report would be appreciated.
> Thanks,
> Badari
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
* [2.6 patch] schedule the SCSI qlogicfc driver for removal
2006-02-04 22:58 ` Adrian Bunk
@ 2006-02-14 0:14 ` Adrian Bunk
2006-02-14 17:43 ` Christoph Hellwig
0 siblings, 1 reply; 62+ messages in thread
From: Adrian Bunk @ 2006-02-14 0:14 UTC (permalink / raw)
To: Badari Pulavarty
Cc: Andrew Vasquez, Christoph Hellwig, Andrew Morton, lkml,
linux-scsi
As usual, there isn't much feedback regarding problems with one driver
from people using an obsolete driver for the same hardware.
So schedule the SCSI qlogicfc driver for removal and let the
flames^Wfeedback begin...
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
Documentation/feature-removal-schedule.txt | 7 +++++++
drivers/scsi/qlogicfc.c | 1 +
2 files changed, 8 insertions(+)
--- linux-2.6.16-rc2-mm1-full/Documentation/feature-removal-schedule.txt.old 2006-02-14 00:26:21.000000000 +0100
+++ linux-2.6.16-rc2-mm1-full/Documentation/feature-removal-schedule.txt 2006-02-14 00:28:12.000000000 +0100
@@ -153,0 +154,7 @@
+What: SCSI qlogicfc driver
+When: August 2006
+Why: replaced by the qla2xxx driver
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
--- linux-2.6.16-rc2-mm1-full/drivers/scsi/qlogicfc.c.old 2006-02-14 00:29:41.000000000 +0100
+++ linux-2.6.16-rc2-mm1-full/drivers/scsi/qlogicfc.c 2006-02-14 00:34:43.000000000 +0100
@@ -724,6 +724,7 @@
dma_addr_t busaddr;
int i;
+ printk(KERN_WARNING "qlogicfc will be removed soon, please use the qla2xxx driver\n");
ENTER("isp2x00_detect");
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [2.6 patch] schedule the SCSI qlogicfc driver for removal
2006-02-14 0:14 ` [2.6 patch] schedule the SCSI qlogicfc driver for removal Adrian Bunk
@ 2006-02-14 17:43 ` Christoph Hellwig
2006-03-25 18:04 ` Adrian Bunk
0 siblings, 1 reply; 62+ messages in thread
From: Christoph Hellwig @ 2006-02-14 17:43 UTC (permalink / raw)
To: Adrian Bunk
Cc: Badari Pulavarty, Andrew Vasquez, Christoph Hellwig,
Andrew Morton, lkml, linux-scsi
On Tue, Feb 14, 2006 at 01:14:09AM +0100, Adrian Bunk wrote:
> As usual, there isn't much feedback regarding problems with one driver
> from people using an obsolete driver for the same hardware.
>
> So schedule the SCSI qlogicfc driver for removal and let the
> flames^Wfeedback begin...
The driver has been deprecatedd since long before the official deprecation
mechanisms existed. It'll go away for 2.6.17.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [2.6 patch] schedule the SCSI qlogicfc driver for removal
2006-02-14 17:43 ` Christoph Hellwig
@ 2006-03-25 18:04 ` Adrian Bunk
0 siblings, 0 replies; 62+ messages in thread
From: Adrian Bunk @ 2006-03-25 18:04 UTC (permalink / raw)
To: Christoph Hellwig, Badari Pulavarty, Andrew Vasquez,
Andrew Morton, lkml, linux-scsi
On Tue, Feb 14, 2006 at 05:43:09PM +0000, Christoph Hellwig wrote:
> On Tue, Feb 14, 2006 at 01:14:09AM +0100, Adrian Bunk wrote:
> > As usual, there isn't much feedback regarding problems with one driver
> > from people using an obsolete driver for the same hardware.
> >
> > So schedule the SCSI qlogicfc driver for removal and let the
> > flames^Wfeedback begin...
>
> The driver has been deprecatedd since long before the official deprecation
> mechanisms existed. It'll go away for 2.6.17.
Is this patch pending somewhere or should I send a patch?
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 62+ messages in thread
end of thread, other threads:[~2006-03-25 18:04 UTC | newest]
Thread overview: 62+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-24 8:48 2.6.14-rc5-mm1 Andrew Morton
2005-10-24 9:28 ` 2.6.14-rc5-mm1 Magnus Damm
2005-10-24 9:34 ` 2.6.14-rc5-mm1 Benoit Boissinot
2005-10-24 12:23 ` 2.6.14-rc5-mm1 Jens Axboe
2005-10-24 14:09 ` 2.6.14-rc5-mm1 Jasper Spaans
2005-10-24 15:40 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-24 15:43 ` 2.6.14-rc5-mm1 Adrian Bunk
2005-10-24 17:21 ` 2.6.14-rc5-mm1 Alan Cox
2005-10-25 9:54 ` 2.6.14-rc5-mm1 Adrian Bunk
2005-10-25 13:00 ` 2.6.14-rc5-mm1 Alan Cox
2005-10-25 13:29 ` 2.6.14-rc5-mm1 Adrian Bunk
2005-10-24 16:06 ` 2.6.14-rc5-mm1 Yoichi Yuasa
2005-10-24 17:51 ` 2.6.14-rc5-mm1 Lexington Luthor
2005-10-24 19:05 ` 2.6.14-rc5-mm1 Benoit Boissinot
2005-10-24 20:48 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-24 21:16 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 15:12 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-25 17:57 ` 2.6.14-rc5-mm1 Andrew Morton
2005-10-25 16:13 ` 2.6.14-rc5-mm1 Christoph Hellwig
2005-10-27 15:26 ` 2.6.14-rc5-mm1 Andrew Vasquez
2005-10-27 15:44 ` 2.6.14-rc5-mm1 Badari Pulavarty
2005-10-27 16:48 ` 2.6.14-rc5-mm1 Andrew Vasquez
2005-10-27 19:02 ` 2.6.14-rc5-mm1 Christoph Hellwig
2005-10-27 21:53 ` 2.6.14-rc5-mm1 Andrew Vasquez
2005-10-28 22:51 ` HEADS UP for QLA2100 users Christoph Hellwig
2005-10-28 23:03 ` Andrew Vasquez
2005-10-28 23:35 ` Badari Pulavarty
2006-02-04 22:58 ` Adrian Bunk
2006-02-14 0:14 ` [2.6 patch] schedule the SCSI qlogicfc driver for removal Adrian Bunk
2006-02-14 17:43 ` Christoph Hellwig
2006-03-25 18:04 ` Adrian Bunk
2005-10-25 5:13 ` intel-agp and yenta-socket issues (was Re: 2.6.14-rc5-mm1 Valdis.Kletnieks
2005-10-25 5:32 ` Andrew Morton
2005-10-25 14:07 ` Valdis.Kletnieks
2005-10-27 8:07 ` 2.6.14-rc5-mm1 crypto issues (was " Valdis.Kletnieks
2005-10-25 17:55 ` 2.6.14-rc5-mm1 Avuton Olrich
2005-10-25 18:39 ` 2.6.14-rc5-mm1 Alan Cox
2005-10-25 18:16 ` 2.6.14-rc5-mm1 Avuton Olrich
2005-10-26 7:48 ` EDAC (was: Re: 2.6.14-rc5-mm1) Sander
2005-10-26 11:09 ` Alan Cox
2005-10-26 13:11 ` Sander
2005-10-26 19:08 ` Doug Thompson
2005-10-26 19:38 ` Sander
2005-10-26 20:22 ` Doug Thompson
2005-10-27 6:23 ` Sander
2005-10-27 16:59 ` Roger Heflin
2005-10-27 16:50 ` Roger Heflin
2005-10-25 23:49 ` 2.6.14-rc5-mm1 - ide-cs, pcmcia ioctl Damir Perisa
2005-10-27 21:31 ` 2.6.14-rc5-mm1 - ide-cs broken! Damir Perisa
2005-10-27 22:03 ` Andrew Morton
2005-10-27 23:18 ` Damir Perisa
2005-10-28 17:58 ` 2.6.14-rc5-mm1: EDAC: several options without a help text Adrian Bunk
2005-10-31 15:26 ` Alan Cox
2005-10-29 19:46 ` 2.6.14-rc5-mm1: reiser4: ICE with gcc 2.95 Adrian Bunk
2005-10-29 19:59 ` 2.6.14-rc5-mm1: SAS: compile error " Adrian Bunk
2005-10-29 20:15 ` Luben Tuikov
2005-10-29 20:48 ` [-mm patch] EDAC drivers: missing PCI dependencies Adrian Bunk
2005-10-30 15:53 ` [-mm patch] fs/namei.c: make path_lookup_create() static Adrian Bunk
2005-10-30 15:58 ` Trond Myklebust
2005-11-02 0:53 ` [-mm patch] fix NET_RADIO=n, IEEE80211=y compile Adrian Bunk
2005-11-02 16:24 ` [-mm patch] EDAC: remove proc_ent from struct mem_ctl_info Adrian Bunk
2005-11-02 17:44 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox