From: Chris Rankin <rankincj@yahoo.com>
To: linux-dvb-maintainer@linuxtv.org
Cc: linux-kernel@vger.kernel.org
Subject: [OOPS] Linux 2.6.14.2 and DVB USB
Date: Mon, 14 Nov 2005 21:05:29 +0000 (GMT) [thread overview]
Message-ID: <20051114210530.5657.qmail@web52901.mail.yahoo.com> (raw)
Hi,
My Linux 2.6.14.2-SMP kernel has just exploded on me, after I detached my USB2 DVB USB adapter.
This is on a UP PIII 1GHz Coppermine machine. There was a storm of:
dvb-usb: bulk message failed: -19 (2/0)
messages between the disconnection and the eventual oops. Note also that the DVB device was
attached to a USB2 hub.
Cheers,
Chris
usb 5-5.4: new high speed USB device using ehci_hcd and address 21
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-01.fw' to the 'Cypress FX2'
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usb 5-5.4: USB disconnect, address 21
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 5-5.4: new high speed USB device using ehci_hcd and address 22
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2).
dvb-usb: MAC address: 00:0d:fe:03:77:33
dib3000: Found a DiBcom 3000P.
DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usb 5-5.4: USB disconnect, address 22
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully deinitialized and disconnected.
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
...
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
Unable to handle kernel paging request at virtual address bd83b3c4
printing eip:
bd83b3c4
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: dvb_usb_nova_t_usb2 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb
dvb_core firmware_class dvb_pll snd_usb_audio snd_usb_lib snd_seq_oss snd_seq_midi
snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul mga drm ipv6
floppy snd_pcm_oss snd_mixer_oss snd_seq binfmt_misc matroxfb_maven i2c_matroxfb i2c_algo_bit loop
w83781d hwmon_vid i2c_isa eeprom ide_cd cdrom psmouse pcspkr button processor nfs nfsd exportfs
lockd parport_pc parport ehci_hcd eth1394 ohci_hcd ohci1394 ieee1394 8139too mii emu10k1_gp
gameport snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_ac97_bus
snd_page_alloc snd_util_mem snd_hwdep snd soundcore i2c_i801 i2c_core uhci_hcd usbcore i8xx_tco
intel_agp agpgart sunrpc ext3 jbd
CPU: 0
EIP: 0060:[<bd83b3c4>] Not tainted VLI
EFLAGS: 00010206 (2.6.14.2)
EIP is at 0xbd83b3c4
eax: 3d373417 ebx: 3d373417 ecx: d498b0b8 edx: c0354000
esi: 00000200 edi: c1405de0 ebp: bd83b3c4 esp: c0354fb0
ds: 007b es: 007b ss: 0068
Process setiathome_4.02 (pid: 12144, threadinfo=c0354000 task=d67375a0)
Stack: c0124de2 00000002 010b8f60 00000000 c0317cc0 c0354000 c0354fc8 c0354fc8
c034007b 00000001 c0317cc8 c034dee0 00000000 c0120ab0 0000000a d647efb0
00000046 0001a952 bf80d458 c010505f
Call Trace:
[<c0124de2>] run_timer_softirq+0xe2/0x1c0
[<c0120ab0>] __do_softirq+0x80/0x100
[<c010505f>] do_softirq+0x4f/0x60
=======================
[<c01038c4>] apic_timer_interrupt+0x1c/0x24
Code: Bad EIP value.
<0>Kernel panic - not syncing: Fatal exception in interrupt
___________________________________________________________
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com
next reply other threads:[~2005-11-14 21:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-14 21:05 Chris Rankin [this message]
2005-11-14 23:39 ` [OOPS] Linux 2.6.14.2 and DVB USB David Brigada
2005-11-14 23:51 ` Chris Rankin
2005-11-15 9:00 ` [linux-dvb-maintainer] " Patrick Boettcher
2005-11-15 15:28 ` Johannes Stezenbach
2005-11-15 15:46 ` Patrick Boettcher
2005-11-15 16:43 ` Johannes Stezenbach
2005-11-15 16:52 ` Patrick Boettcher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051114210530.5657.qmail@web52901.mail.yahoo.com \
--to=rankincj@yahoo.com \
--cc=linux-dvb-maintainer@linuxtv.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox