public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Matthew Garrett <mjg59@srcf.ucam.org>
To: davej@codemonkey.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Add basic PM support for Nvidia and ATI AGP bridges
Date: Thu, 24 Nov 2005 06:00:30 +0000	[thread overview]
Message-ID: <20051124060030.GF28070@srcf.ucam.org> (raw)

I retrieved these from the swsusp2 patchset, but they seem to be 
independently useful. As a result, I'm not sure who the original author 
is - however, they seem to be pretty obvious.

## All lines beginning with `## DP:' are a description of the patch.
## DP: Description: Add suspend/resume support to ATI and Nvidia AGP bridges
## DP: Patch author: Unknown
## DP: Upstream status: Not submitted

. $(dirname $0)/DPATCH

@DPATCH@
diff -ruNp 210-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c 210-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c
--- 210-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c	2005-06-20 11:46:51.000000000 +1000
+++ 210-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c	2005-07-04 23:14:18.000000000 +1000
@@ -507,6 +507,33 @@ static void __devexit agp_ati_remove(str
 	agp_put_bridge(bridge);
 }
 
+#ifdef CONFIG_PM
+
+static int agp_ati_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state (pdev);
+	pci_set_power_state (pdev, 3);
+
+	return 0;
+}
+
+static int agp_ati_resume(struct pci_dev *pdev)
+{
+	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+
+	/* set power state 0 and restore PCI space */
+	pci_set_power_state (pdev, 0);
+	pci_restore_state(pdev);
+
+	/* reconfigure AGP hardware again */
+	if (bridge->driver == &ati_generic_bridge)
+		return ati_configure();
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
 static struct pci_device_id agp_ati_pci_table[] = {
 	{
 	.class		= (PCI_CLASS_BRIDGE_HOST << 8),
@@ -526,6 +553,10 @@ static struct pci_driver agp_ati_pci_dri
 	.id_table	= agp_ati_pci_table,
 	.probe		= agp_ati_probe,
 	.remove		= agp_ati_remove,
+#ifdef CONFIG_PM
+	.suspend	= agp_ati_suspend,
+	.resume		= agp_ati_resume,
+#endif
 };
 
 static int __init agp_ati_init(void)
diff -ruNp 210-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c 210-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c
--- 210-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c	2005-06-20 11:46:51.000000000 +1000
+++ 210-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c	2005-07-04 23:14:18.000000000 +1000
@@ -397,11 +397,40 @@ static struct pci_device_id agp_nvidia_p
 
 MODULE_DEVICE_TABLE(pci, agp_nvidia_pci_table);
 
+#ifdef CONFIG_PM
+static int agp_nvidia_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state (pdev);
+	pci_set_power_state (pdev, 3);
+
+	return 0;
+}
+
+static int agp_nvidia_resume(struct pci_dev *pdev)
+{
+	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+
+	/* set power state 0 and restore PCI space */
+	pci_set_power_state (pdev, 0);
+	pci_restore_state(pdev);
+
+	/* reconfigure AGP hardware again */
+	if (bridge->driver == &nvidia_driver)
+		nvidia_configure();
+
+	return 0;
+}
+#endif
+
 static struct pci_driver agp_nvidia_pci_driver = {
 	.name		= "agpgart-nvidia",
 	.id_table	= agp_nvidia_pci_table,
 	.probe		= agp_nvidia_probe,
 	.remove		= agp_nvidia_remove,
+#ifdef CONFIG_PM
+	.suspend	= agp_nvidia_suspend,
+	.resume		= agp_nvidia_resume,
+#endif
 };
 
 static int __init agp_nvidia_init(void)

-- 
Matthew Garrett | mjg59@srcf.ucam.org

             reply	other threads:[~2005-11-24  6:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-24  6:00 Matthew Garrett [this message]
2005-11-24 11:33 ` [PATCH] Add basic PM support for Nvidia and ATI AGP bridges Rolf Eike Beer
2005-11-25 21:01 ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20051124060030.GF28070@srcf.ucam.org \
    --to=mjg59@srcf.ucam.org \
    --cc=davej@codemonkey.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox