* Mouse stalls with 2.6.5-rc5-mm2
@ 2005-12-11 13:48 Jesper Juhl
2005-12-11 18:27 ` Dmitry Torokhov
0 siblings, 1 reply; 7+ messages in thread
From: Jesper Juhl @ 2005-12-11 13:48 UTC (permalink / raw)
To: LKML List; +Cc: Andrew Morton, Vojtech Pavlik
[-- Attachment #1: Type: text/plain, Size: 1500 bytes --]
With 2.6.5-rc5-mm2 I'm getting regular mouse stalls for short periods
of time ~1sec
I'm also seeing this in dmesg :
[ 117.308573] psmouse.c: resync failed, issuing reconnect request
[ 157.100063] psmouse.c: resync failed, issuing reconnect request
[ 167.583936] psmouse.c: resync failed, issuing reconnect request
[ 278.986267] psmouse.c: resync failed, issuing reconnect request
[ 328.320242] psmouse.c: resync failed, issuing reconnect request
[ 358.117414] psmouse.c: resync failed, issuing reconnect request
[ 472.814321] psmouse.c: resync failed, issuing reconnect request
[ 492.781941] psmouse.c: resync failed, issuing reconnect request
[ 525.788327] psmouse.c: resync failed, issuing reconnect request
[ 542.843044] psmouse.c: resync failed, issuing reconnect request
[ 552.129681] psmouse.c: resync failed, issuing reconnect request
The times correspond nicely to the mouse stalls, every time it stalls
I get a new line, so they are definately related.
2.6.5-rc5-git1 works flawlessly.
No hardware has changed.
Mouse is a Logitech MouseMan Wheel (M/N: M-BD53) connected to a
"Master View PRO" KVM switch.
Comlete dmesg output, .config, ver_linux output, lspci output, lsusb
output and cat /proc/cpuinfo output attached. Please just ask if
anything else is needed.
--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 13945 bytes --]
[4294667.296000] Linux version 2.6.15-rc5-mm2 (juhl@dragon) (gcc version 3.3.6) #1 PREEMPT Sun Dec 11 14:15:18 CET 2005
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[4294667.296000] BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[4294667.296000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131052
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126956 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ASUS ) @ 0x000f69e0
[4294667.296000] ACPI: RSDT (v001 ASUS A7M266 0x30303031 MSFT 0x31313031) @ 0x1ffec000
[4294667.296000] ACPI: FADT (v001 ASUS A7M266 0x30303031 MSFT 0x31313031) @ 0x1ffec080
[4294667.296000] ACPI: BOOT (v001 ASUS A7M266 0x30303031 MSFT 0x31313031) @ 0x1ffec040
[4294667.296000] ACPI: DSDT (v001 ASUS A7M266 0x00001000 MSFT 0x0100000b) @ 0x00000000
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01402000)
[4294667.296000] Enabling fast FPU save and restore... done.
[4294667.296000] Initializing CPU#0
[4294667.296000] Kernel command line: BOOT_IMAGE=2.6.15-rc5-mm2 ro root=801 pci=usepirqmask
[4294667.296000] CPU 0 irqstacks, hard=c03fc000 soft=c03fb000
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[ 0.000000] Detected 1400.282 MHz processor.
[ 23.926053] Using tsc for high-res timesource
[ 23.927637] Console: colour VGA+ 80x25
[ 23.929984] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 23.932523] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 23.957079] Memory: 515512k/524208k available (1981k kernel code, 8184k reserved, 865k data, 180k init, 0k highmem)
[ 23.957152] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.016334] Calibrating delay using timer specific routine.. 2803.71 BogoMIPS (lpj=1401858)
[ 24.016486] Mount-cache hash table entries: 512
[ 24.016683] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[ 24.016694] CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[ 24.016704] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.016759] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.016808] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
[ 24.016816] Intel machine check architecture supported.
[ 24.016867] Intel machine check reporting enabled on CPU#0.
[ 24.016929] mtrr: v2.0 (20020519)
[ 24.016979] CPU: AMD Athlon(tm) Processor stepping 04
[ 24.017094] Checking 'hlt' instruction... OK.
[ 24.028337] ACPI: setting ELCR to 0200 (from 0838)
[ 24.029079] NET: Registered protocol family 16
[ 24.029162] ACPI: bus type pci registered
[ 24.030219] PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1
[ 24.030281] PCI: Using configuration type 1
[ 24.030950] ACPI: Subsystem revision 20050916
[ 24.037076] ACPI: Interpreter enabled
[ 24.037128] ACPI: Using PIC for interrupt routing
[ 24.037952] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 24.038736] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 24.039531] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 24.040298] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 24.042291] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.042656] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 24.044699] PCI quirk: region e300-e37f claimed by vt82c686 HW-mon
[ 24.044755] PCI quirk: region e800-e80f claimed by vt82c686 SMB
[ 24.045123] Boot video device is 0000:01:05.0
[ 24.045163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.117301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 24.123952] SCSI subsystem initialized
[ 24.124009] PCI: Using ACPI for IRQ routing
[ 24.124062] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.136629] PCI: Bridge: 0000:00:01.0
[ 24.136680] IO window: disabled.
[ 24.136732] MEM window: e5000000-e5efffff
[ 24.136781] PREFETCH window: e7f00000-f77fffff
[ 24.136843] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.136930] Simple Boot Flag at 0x3a set to 0x1
[ 24.137036] Machine check exception polling timer started.
[ 24.137197] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 24.137271] apm: overridden by ACPI.
[ 24.138526] io scheduler noop registered
[ 24.138618] io scheduler anticipatory registered
[ 24.138701] io scheduler deadline registered
[ 24.138790] io scheduler cfq registered
[ 24.138877] PCI: Disabling Via external APIC routing
[ 24.142464] Real Time Clock Driver v1.12
[ 24.142805] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.142927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.143035] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[ 24.143502] mice: PS/2 mouse device common for all mice
[ 24.143715] Floppy drive(s): fd0 is 1.44M
[ 24.157943] FDC 0 is a post-1991 82077
[ 24.158970] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[ 24.159050] PCI: Enabling device 0000:00:09.0 (0094 -> 0097)
[ 24.159537] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[ 24.159590] PCI: setting IRQ 3 as level-triggered
[ 24.159597] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[ 24.159745] PCI: Via IRQ fixup for 0000:00:09.0, from 255 to 3
[ 24.163867] eth0: VIA Rhine II at 0xe4800000, 00:50:ba:f2:a3:1d, IRQ 3.
[ 24.164811] eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
[ 24.165352] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 24.165404] PCI: setting IRQ 5 as level-triggered
[ 24.165410] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 24.191806] input: AT Translated Set 2 keyboard as /class/input/input0
[ 24.375385] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 24.375387] <Adaptec 29160N Ultra160 SCSI adapter>
[ 24.375390] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 24.375392]
[ 24.803728] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[ 40.396005] Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
[ 40.397017] Type: CD-ROM ANSI SCSI revision: 02
[ 40.397169] target0:0:4: Beginning Domain Validation
[ 40.400265] target0:0:4: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 40.402211] target0:0:4: Domain Validation skipping write tests
[ 40.402262] target0:0:4: Ending Domain Validation
[ 40.407342] Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
[ 40.408350] Type: CD-ROM ANSI SCSI revision: 02
[ 40.408483] target0:0:5: Beginning Domain Validation
[ 40.410351] target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 40.411575] target0:0:5: Domain Validation skipping write tests
[ 40.411628] target0:0:5: Ending Domain Validation
[ 40.412974] Vendor: IBM Model: DDYS-T36950N Rev: S96H
[ 40.413980] Type: Direct-Access ANSI SCSI revision: 03
[ 40.414114] scsi0:A:6:0: Tagged Queuing enabled. Depth 200
[ 40.414200] target0:0:6: Beginning Domain Validation
[ 40.417055] target0:0:6: wide asynchronous.
[ 40.419217] target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 40.432705] target0:0:6: Ending Domain Validation
[ 42.484356] SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
[ 42.485678] SCSI device sda: drive cache: write back
[ 42.486698] SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
[ 42.488011] SCSI device sda: drive cache: write back
[ 42.488064] sda: sda1 sda2 sda3 sda4
[ 42.501052] sd 0:0:6:0: Attached scsi disk sda
[ 42.503080] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[ 42.503134] Uniform CD-ROM driver Revision: 3.20
[ 42.503262] sr 0:0:4:0: Attached scsi CD-ROM sr0
[ 42.508185] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 42.508282] sr 0:0:5:0: Attached scsi CD-ROM sr1
[ 42.508362] sr 0:0:4:0: Attached scsi generic sg0 type 5
[ 42.508447] sr 0:0:5:0: Attached scsi generic sg1 type 5
[ 42.508532] sd 0:0:6:0: Attached scsi generic sg2 type 0
[ 42.508595] MC: drivers/edac/edac_mc.c version MC $Revision: 1.4.2.10 $
[ 42.508767] MC0: Giving out device to amd76x_edac AMD761: PCI 0000:00:00.0 (0000:00:00.0)
[ 42.508890] NET: Registered protocol family 2
[ 42.518389] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 42.518631] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.519125] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[ 42.519637] TCP: Hash tables configured (established 32768 bind 32768)
[ 42.519689] TCP reno registered
[ 42.519813] TCP bic registered
[ 42.519876] NET: Registered protocol family 1
[ 42.519932] NET: Registered protocol family 17
[ 42.519986] Using IPI Shortcut mode
[ 42.520181] ACPI wakeup devices:
[ 42.520234] PWRB PCI0 PCI1 USB0 USB1
[ 42.520454] ACPI: (supports S0 S1 S4 S5)
[ 42.532494] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.532557] VFS: Mounted root (ext3 filesystem) readonly.
[ 42.532969] Freeing unused kernel memory: 180k freed
[ 42.533034] Write protecting the kernel read-only data: 373k
[ 42.533559] kjournald starting. Commit interval 5 seconds
[ 44.202109] Adding 763076k swap on /dev/sda3. Priority:-1 extents:1 across:763076k
[ 44.286833] EXT3 FS on sda1, internal journal
[ 45.189033] Linux agpgart interface v0.101 (c) Dave Jones
[ 48.504736] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 48.787778] ReiserFS: sda2: using ordered data mode
[ 48.793073] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 48.795422] ReiserFS: sda2: checking transaction log (sda2)
[ 48.807748] ReiserFS: sda2: Using r5 hash to sort names
[ 48.839565] ReiserFS: sda4: found reiserfs format "3.6" with standard journal
[ 49.537162] ReiserFS: sda4: using ordered data mode
[ 49.584241] ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 49.586694] ReiserFS: sda4: checking transaction log (sda4)
[ 49.644802] ReiserFS: sda4: Using r5 hash to sort names
[ 51.591953] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 52.259631] PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
[ 52.259833] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[ 52.663925] usbcore: registered new driver usbfs
[ 52.682803] usbcore: registered new driver hub
[ 52.722065] USB Universal Host Controller Interface driver v2.3
[ 52.740895] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[ 52.741098] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 52.760474] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 52.760663] uhci_hcd 0000:00:04.2: irq 3, io base 0x0000d400
[ 52.779025] usb usb1: configuration #1 chosen from 1 choice
[ 52.800295] hub 1-0:1.0: USB hub found
[ 52.800496] hub 1-0:1.0: 2 ports detected
[ 52.918723] ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[ 52.918924] uhci_hcd 0000:00:04.3: UHCI Host Controller
[ 52.936088] uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
[ 52.936277] uhci_hcd 0000:00:04.3: irq 3, io base 0x0000d000
[ 52.954141] usb usb2: configuration #1 chosen from 1 choice
[ 52.963533] hub 2-0:1.0: USB hub found
[ 52.963744] hub 2-0:1.0: 2 ports detected
[ 117.308573] psmouse.c: resync failed, issuing reconnect request
[ 157.100063] psmouse.c: resync failed, issuing reconnect request
[ 167.583936] psmouse.c: resync failed, issuing reconnect request
[ 278.986267] psmouse.c: resync failed, issuing reconnect request
[ 328.320242] psmouse.c: resync failed, issuing reconnect request
[ 358.117414] psmouse.c: resync failed, issuing reconnect request
[ 472.814321] psmouse.c: resync failed, issuing reconnect request
[ 492.781941] psmouse.c: resync failed, issuing reconnect request
[ 525.788327] psmouse.c: resync failed, issuing reconnect request
[ 542.843044] psmouse.c: resync failed, issuing reconnect request
[ 552.129681] psmouse.c: resync failed, issuing reconnect request
[ 602.945594] psmouse.c: resync failed, issuing reconnect request
[ 646.105203] psmouse.c: resync failed, issuing reconnect request
[ 673.600571] psmouse.c: resync failed, issuing reconnect request
[ 828.893419] psmouse.c: resync failed, issuing reconnect request
[ 842.271094] psmouse.c: resync failed, issuing reconnect request
[ 893.756793] psmouse.c: resync failed, issuing reconnect request
[-- Attachment #3: config.txt --]
[-- Type: text/plain, Size: 27554 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc5-mm2
# Sun Dec 11 14:02:13 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_CS5535 is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=200
CONFIG_AIC7XXX_RESET_DELAY_MS=15001
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI_ARCH_HAS_MASTER=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_IP is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=y
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=865
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
[-- Attachment #4: ver_linux.txt --]
[-- Type: text/plain, Size: 996 bytes --]
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux dragon 2.6.15-rc5-mm2 #1 PREEMPT Sun Dec 11 14:15:18 CET 2005 i686 unknown unknown GNU/Linux
Gnu C 3.3.6
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.38
reiserfsprogs 3.6.19
quota-tools 3.12.
PPP 2.4.4b1
nfs-utils 1.0.7
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Linux C++ Library 5.0.7
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
udev 064
Modules Loaded snd_pcm_oss snd_mixer_oss uhci_hcd usbcore snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd agpgart
[-- Attachment #5: lspci.txt --]
[-- Type: text/plain, Size: 4297 bytes --]
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13)
Flags: bus master, medium devsel, latency 32
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at f7800000 (32-bit, prefetchable) [size=4K]
I/O ports at e000 [disabled] [size=4]
Capabilities: <available only to root>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e5000000-e5efffff
Prefetchable memory behind bridge: e7f00000-f77fffff
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7M266 Mainboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: <available only to root>
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=16]
Capabilities: <available only to root>
00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d400 [size=32]
Capabilities: <available only to root>
00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d000 [size=32]
Capabilities: <available only to root>
00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: ASUSTeK Computer Inc. A7M266 Mainboard
Flags: medium devsel, IRQ 9
Capabilities: <available only to root>
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: ASUSTeK Computer Inc. CMI8738 6ch-MX
Flags: bus master, stepping, medium devsel, latency 32, IRQ 5
I/O ports at a400 [size=256]
Capabilities: <available only to root>
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 42)
Subsystem: D-Link System Inc DFE-530TX rev B
Flags: bus master, stepping, medium devsel, latency 32, IRQ 3
I/O ports at a000 [size=256]
Memory at e4800000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 30020000 [disabled] [size=64K]
Capabilities: <available only to root>
00:0a.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0100
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e6000000 (32-bit, prefetchable) [size=16M]
Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
Memory at e3800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e5ff0000 [disabled] [size=64K]
00:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
BIST result: 00
I/O ports at 9800 [disabled] [size=256]
Memory at e3000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: <available only to root>
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs SBLive! 5.1 eMicro 28028
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at 9400 [size=32]
Capabilities: <available only to root>
00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at 9000 [disabled] [size=8]
Capabilities: <available only to root>
01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA Parhelia AGP (rev 03) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Parhelia 128Mb
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 4
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e5000000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: <available only to root>
[-- Attachment #6: lsusb.txt --]
[-- Type: text/plain, Size: 2922 bytes --]
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
[-- Attachment #7: cpuinfo.txt --]
[-- Type: text/plain, Size: 404 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1400.282
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2803.71
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-11 13:48 Mouse stalls with 2.6.5-rc5-mm2 Jesper Juhl
@ 2005-12-11 18:27 ` Dmitry Torokhov
2005-12-11 19:49 ` Jesper Juhl
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Torokhov @ 2005-12-11 18:27 UTC (permalink / raw)
To: Jesper Juhl; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
On Sunday 11 December 2005 08:48, Jesper Juhl wrote:
> With 2.6.5-rc5-mm2 I'm getting regular mouse stalls for short periods
> of time ~1sec
> I'm also seeing this in dmesg :
>
> [ 117.308573] psmouse.c: resync failed, issuing reconnect request
> [ 157.100063] psmouse.c: resync failed, issuing reconnect request
> [ 167.583936] psmouse.c: resync failed, issuing reconnect request
> [ 278.986267] psmouse.c: resync failed, issuing reconnect request
> [ 328.320242] psmouse.c: resync failed, issuing reconnect request
> [ 358.117414] psmouse.c: resync failed, issuing reconnect request
> [ 472.814321] psmouse.c: resync failed, issuing reconnect request
> [ 492.781941] psmouse.c: resync failed, issuing reconnect request
> [ 525.788327] psmouse.c: resync failed, issuing reconnect request
> [ 542.843044] psmouse.c: resync failed, issuing reconnect request
> [ 552.129681] psmouse.c: resync failed, issuing reconnect request
>
> The times correspond nicely to the mouse stalls, every time it stalls
> I get a new line, so they are definately related.
>
> 2.6.5-rc5-git1 works flawlessly.
> No hardware has changed.
> Mouse is a Logitech MouseMan Wheel (M/N: M-BD53) connected to a
> "Master View PRO" KVM switch.
>
> Comlete dmesg output, .config, ver_linux output, lspci output, lsusb
> output and cat /proc/cpuinfo output attached. Please just ask if
> anything else is needed.
>
Could you please do the following:
1. echo 1 > /sys/modules/i8042/parameters/debug
2. switch away from your linux box
3. wait 5 seconds
4. Switch back to Linux box
5. Move mouse slightly
6. echo 0 > /sys/modules/i8042/parameters/debug
7. Send me dmesg
Also, does the resync fail if you are not using KVM and plug the mouse
directly into the box.
To stop resync attempts do:
echo -n 0 > /sys/bus/serio/devices/serioX/resync_time
where serioX is serio port asociated with your mouse.
Thanks!
--
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-11 18:27 ` Dmitry Torokhov
@ 2005-12-11 19:49 ` Jesper Juhl
2005-12-12 3:50 ` Dmitry Torokhov
2005-12-21 20:59 ` Dmitry Torokhov
0 siblings, 2 replies; 7+ messages in thread
From: Jesper Juhl @ 2005-12-11 19:49 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
[-- Attachment #1: Type: text/plain, Size: 2878 bytes --]
On 12/11/05, Dmitry Torokhov <dtor_core@ameritech.net> wrote:
> On Sunday 11 December 2005 08:48, Jesper Juhl wrote:
> > With 2.6.5-rc5-mm2 I'm getting regular mouse stalls for short periods
> > of time ~1sec
> > I'm also seeing this in dmesg :
> >
> > [ 117.308573] psmouse.c: resync failed, issuing reconnect request
> > [ 157.100063] psmouse.c: resync failed, issuing reconnect request
> > [ 167.583936] psmouse.c: resync failed, issuing reconnect request
> > [ 278.986267] psmouse.c: resync failed, issuing reconnect request
> > [ 328.320242] psmouse.c: resync failed, issuing reconnect request
> > [ 358.117414] psmouse.c: resync failed, issuing reconnect request
> > [ 472.814321] psmouse.c: resync failed, issuing reconnect request
> > [ 492.781941] psmouse.c: resync failed, issuing reconnect request
> > [ 525.788327] psmouse.c: resync failed, issuing reconnect request
> > [ 542.843044] psmouse.c: resync failed, issuing reconnect request
> > [ 552.129681] psmouse.c: resync failed, issuing reconnect request
> >
> > The times correspond nicely to the mouse stalls, every time it stalls
> > I get a new line, so they are definately related.
> >
> > 2.6.5-rc5-git1 works flawlessly.
> > No hardware has changed.
> > Mouse is a Logitech MouseMan Wheel (M/N: M-BD53) connected to a
> > "Master View PRO" KVM switch.
> >
> > Comlete dmesg output, .config, ver_linux output, lspci output, lsusb
> > output and cat /proc/cpuinfo output attached. Please just ask if
> > anything else is needed.
> >
>
> Could you please do the following:
>
Sure thing.
> 1. echo 1 > /sys/modules/i8042/parameters/debug
> 2. switch away from your linux box
> 3. wait 5 seconds
> 4. Switch back to Linux box
> 5. Move mouse slightly
> 6. echo 0 > /sys/modules/i8042/parameters/debug
> 7. Send me dmesg
>
Find dmesg.txt attached.
> Also, does the resync fail if you are not using KVM and plug the mouse
> directly into the box.
>
well, unplugging the mouse from the KVM and plugging it into the PC's
PS/2 port directly resulted in this in dmesg :
[ 567.297724] psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost
synchronization, throwing 1 bytes away.
[ 567.807251] psmouse.c: resync failed, issuing reconnect request
[ 568.015721] logips2pp: Detected unknown logitech mouse model 87
and after that I see no more resync failed messages and the mouse doesn't stall.
> To stop resync attempts do:
>
> echo -n 0 > /sys/bus/serio/devices/serioX/resync_time
>
> where serioX is serio port asociated with your mouse.
>
This cures the problem nicely with no obvious ill effects with the
mouse plugged into the KVM...
--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 4977 bytes --]
2.c: 00 <- i8042 (interrupt, AUX, 12) [245059]
[ 268.723209] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245062]
[ 268.727211] drivers/input/serio/i8042.c: 28 <- i8042 (interrupt, AUX, 12) [245066]
[ 268.729521] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245068]
[ 268.732167] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245071]
[ 268.734511] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245073]
[ 268.738589] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, AUX, 12) [245077]
[ 268.741536] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245080]
[ 268.743954] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245082]
[ 268.746594] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245085]
[ 268.750683] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, AUX, 12) [245089]
[ 268.753074] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245091]
[ 268.755800] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, AUX, 12) [245094]
[ 268.758166] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245097]
[ 268.762243] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, AUX, 12) [245101]
[ 268.765188] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, AUX, 12) [245104]
[ 268.767606] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245106]
[ 268.770243] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245109]
[ 268.774328] drivers/input/serio/i8042.c: 28 <- i8042 (interrupt, AUX, 12) [245113]
[ 268.776719] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245115]
[ 268.779446] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245118]
[ 268.781805] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245120]
[ 268.785807] drivers/input/serio/i8042.c: 28 <- i8042 (interrupt, AUX, 12) [245124]
[ 268.788128] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245127]
[ 268.790744] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245129]
[ 268.793115] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245132]
[ 268.805335] drivers/input/serio/i8042.c: 28 <- i8042 (interrupt, AUX, 12) [245144]
[ 268.807592] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245146]
[ 268.810065] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245148]
[ 268.812687] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245151]
[ 268.832976] drivers/input/serio/i8042.c: 28 <- i8042 (interrupt, AUX, 12) [245171]
[ 268.835442] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245174]
[ 268.837914] drivers/input/serio/i8042.c: ff <- i8042 (interrupt, AUX, 12) [245176]
[ 268.840536] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, AUX, 12) [245179]
[ 269.663493] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [246002]
[ 269.666174] drivers/input/serio/i8042.c: 48 <- i8042 (interrupt, KBD, 1) [246005]
[ 269.790491] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [246130]
[ 269.795865] drivers/input/serio/i8042.c: c8 <- i8042 (interrupt, KBD, 1) [246135]
[ 270.071305] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [246411]
[ 270.073989] drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, KBD, 1) [246413]
[ 270.190480] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [246530]
[ 270.195851] drivers/input/serio/i8042.c: c7 <- i8042 (interrupt, KBD, 1) [246535]
[ 270.408755] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [246748]
[ 270.411434] drivers/input/serio/i8042.c: 4d <- i8042 (interrupt, KBD, 1) [246751]
[ 270.826578] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [247166]
[ 270.829261] drivers/input/serio/i8042.c: 4d <- i8042 (interrupt, KBD, 1) [247169]
[ 270.850274] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [247190]
[ 270.855647] drivers/input/serio/i8042.c: cd <- i8042 (interrupt, KBD, 1) [247195]
[ 271.181472] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [247522]
[ 271.184159] drivers/input/serio/i8042.c: 4d <- i8042 (interrupt, KBD, 1) [247524]
[ 271.285046] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, KBD, 1) [247625]
[ 271.290420] drivers/input/serio/i8042.c: cd <- i8042 (interrupt, KBD, 1) [247631]
[ 271.544161] drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, KBD, 1) [247884]
[ 271.625990] drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, KBD, 1) [247966]
[ 271.797235] drivers/input/serio/i8042.c: 0b <- i8042 (interrupt, KBD, 1) [248138]
[ 271.886895] drivers/input/serio/i8042.c: 8b <- i8042 (interrupt, KBD, 1) [248227]
[ 272.340276] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, KBD, 1) [248681]
[ 322.148576] psmouse.c: resync failed, issuing reconnect request
[ 376.604151] psmouse.c: resync failed, issuing reconnect request
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-11 19:49 ` Jesper Juhl
@ 2005-12-12 3:50 ` Dmitry Torokhov
2005-12-12 17:14 ` Jesper Juhl
2005-12-21 20:59 ` Dmitry Torokhov
1 sibling, 1 reply; 7+ messages in thread
From: Dmitry Torokhov @ 2005-12-12 3:50 UTC (permalink / raw)
To: Jesper Juhl; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
On Sunday 11 December 2005 14:49, Jesper Juhl wrote:
> well, unplugging the mouse from the KVM and plugging it into the PC's
> PS/2 port directly resulted in this in dmesg :
>
> [ 567.297724] psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost
> synchronization, throwing 1 bytes away.
> [ 567.807251] psmouse.c: resync failed, issuing reconnect request
> [ 568.015721] logips2pp: Detected unknown logitech mouse model 87
>
> and after that I see no more resync failed messages and the mouse doesn't stall.
>
Ok, so your KVM fakes the response to POLL command. But normally
(with resync disabled) your mouse works just fine with your KVM,
you can still use wheel after switching between the boxes, right?
If so I will try adjusting my patch.
In the mean time could you please try the tiny patch below - it
shoudl get rid of "unknown logitech mouse" message. Could you send
me your dmesg after applying the patch?
Thanks!
--
Dmitry
Subject: logips2pp: add signature of MouseMan Wheel Mouse (87)
Input: logips2pp - add signature of MouseMan Wheel Mouse (87)
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/logips2pp.c | 1 +
1 files changed, 1 insertion(+)
Index: work/drivers/input/mouse/logips2pp.c
===================================================================
--- work.orig/drivers/input/mouse/logips2pp.c
+++ work/drivers/input/mouse/logips2pp.c
@@ -228,6 +228,7 @@ static struct ps2pp_info *get_model_info
{ 83, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 85, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 86, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
+ { 87, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 88, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 96, 0, 0 },
{ 97, PS2PP_KIND_TP3, PS2PP_WHEEL | PS2PP_HWHEEL },
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-12 3:50 ` Dmitry Torokhov
@ 2005-12-12 17:14 ` Jesper Juhl
0 siblings, 0 replies; 7+ messages in thread
From: Jesper Juhl @ 2005-12-12 17:14 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
On 12/12/05, Dmitry Torokhov <dtor_core@ameritech.net> wrote:
> On Sunday 11 December 2005 14:49, Jesper Juhl wrote:
> > well, unplugging the mouse from the KVM and plugging it into the PC's
> > PS/2 port directly resulted in this in dmesg :
> >
> > [ 567.297724] psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost
> > synchronization, throwing 1 bytes away.
> > [ 567.807251] psmouse.c: resync failed, issuing reconnect request
> > [ 568.015721] logips2pp: Detected unknown logitech mouse model 87
> >
> > and after that I see no more resync failed messages and the mouse doesn't stall.
> >
>
> Ok, so your KVM fakes the response to POLL command. But normally
> (with resync disabled) your mouse works just fine with your KVM,
> you can still use wheel after switching between the boxes, right?
The wheel works fine after switching away and back.
> If so I will try adjusting my patch.
>
> In the mean time could you please try the tiny patch below - it
> shoudl get rid of "unknown logitech mouse" message. Could you send
> me your dmesg after applying the patch?
>
Patch seems to do its job :
$ dmesg | grep -i mouse
[ 24.039229] mice: PS/2 mouse device common for all mice
[ 24.790995] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[ 192.060997] psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost
synchronization, throwing 1 bytes away.
[ 192.569915] psmouse.c: resync failed, issuing reconnect request
Thanks.
--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-11 19:49 ` Jesper Juhl
2005-12-12 3:50 ` Dmitry Torokhov
@ 2005-12-21 20:59 ` Dmitry Torokhov
2005-12-21 21:50 ` Jesper Juhl
1 sibling, 1 reply; 7+ messages in thread
From: Dmitry Torokhov @ 2005-12-21 20:59 UTC (permalink / raw)
To: Jesper Juhl; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
[-- Attachment #1: Type: text/plain, Size: 615 bytes --]
On 12/11/05, Jesper Juhl <jesper.juhl@gmail.com> wrote:
> On 12/11/05, Dmitry Torokhov <dtor_core@ameritech.net> wrote:
>
> > To stop resync attempts do:
> >
> > echo -n 0 > /sys/bus/serio/devices/serioX/resync_time
> >
> > where serioX is serio port asociated with your mouse.
> >
> This cures the problem nicely with no obvious ill effects with the
> mouse plugged into the KVM...
>
Jesper,
Could you please try applying the attached patch to -mm and see if you
still have "resync failed" messages when you don't "echo 0" into
resync_time attribute?
Thank you in advance,
Dmitry
[-- Attachment #2: psmouse-resync-update.patch --]
[-- Type: application/octet-stream, Size: 1159 bytes --]
drivers/input/mouse/psmouse-base.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
Index: linux/drivers/input/mouse/psmouse-base.c
===================================================================
--- linux.orig/drivers/input/mouse/psmouse-base.c
+++ linux/drivers/input/mouse/psmouse-base.c
@@ -1029,6 +1029,23 @@ static int psmouse_switch_protocol(struc
else
psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, 1);
+ /*
+ * If mouse's packet size is 3 there is no point in polling the
+ * device in hopes to detect protocol reset - we won't get less
+ * than 3 bytes response anyhow.
+ */
+ if (psmouse->pktsize == 3)
+ psmouse->resync_time = 0;
+
+ /*
+ * Some smart KVMs fake response to POLL command returning just
+ * 3 bytes and messing up our resync logic, so if initial poll
+ * fails we won't try polling the device anymore. Hopefully
+ * such KVM will maintain initially selected protocol.
+ */
+ if (psmouse->resync_time && psmouse->poll(psmouse))
+ psmouse->resync_time = 0;
+
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Mouse stalls with 2.6.5-rc5-mm2
2005-12-21 20:59 ` Dmitry Torokhov
@ 2005-12-21 21:50 ` Jesper Juhl
0 siblings, 0 replies; 7+ messages in thread
From: Jesper Juhl @ 2005-12-21 21:50 UTC (permalink / raw)
To: dtor_core; +Cc: LKML List, Andrew Morton, Vojtech Pavlik
On 12/21/05, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> On 12/11/05, Jesper Juhl <jesper.juhl@gmail.com> wrote:
> > On 12/11/05, Dmitry Torokhov <dtor_core@ameritech.net> wrote:
> >
> > > To stop resync attempts do:
> > >
> > > echo -n 0 > /sys/bus/serio/devices/serioX/resync_time
> > >
> > > where serioX is serio port asociated with your mouse.
> > >
> > This cures the problem nicely with no obvious ill effects with the
> > mouse plugged into the KVM...
> >
>
> Jesper,
>
> Could you please try applying the attached patch to -mm and see if you
> still have "resync failed" messages when you don't "echo 0" into
> resync_time attribute?
>
I applied the patch to 2.6.15-rc5-mm3, took out the "echo 0 to
resync_time" workaround that I had in rc.local and I no longer see the
"resync failed" messages in dmesg.
With this patch applied everything seems to be working OK with the
mouse attached to the KVM.
> Thank you in advance,
>
Thank /you/ for fixing it. :-)
--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-12-21 21:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-11 13:48 Mouse stalls with 2.6.5-rc5-mm2 Jesper Juhl
2005-12-11 18:27 ` Dmitry Torokhov
2005-12-11 19:49 ` Jesper Juhl
2005-12-12 3:50 ` Dmitry Torokhov
2005-12-12 17:14 ` Jesper Juhl
2005-12-21 20:59 ` Dmitry Torokhov
2005-12-21 21:50 ` Jesper Juhl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox