From: Bernhard Rosenkraenzer <bero@arklinux.org>
To: linux-kernel@vger.kernel.org
Subject: sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board
Date: Wed, 14 Dec 2005 15:01:09 +0100 [thread overview]
Message-ID: <200512141501.10093.bero@arklinux.org> (raw)
On an ASRock 939Dual-SATA2 board, the sata_uli driver recognizes the onboard
SATA controller (PCI ID 10b9:5289 rev 10, Subsystem 1849:5289), but fails to
see an attached harddisk (the BIOS identifies the harddisk correctly, so a
hardware failure is unlikely). sata_uli apparently sees _something_ is
attached, but doesn't get further. dmesg says:
libata version 1.20 loaded.
sata_uli 0000:00:12.1: version 0.5
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 209
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE082 bmdma 0xD880 irq 209
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 209
ata1: SATA link up 1.5 Gbps (SStatus 113)
scsi0 : sata_uli
ata2: SATA link down (SStatus 0)
scsi1 : sata_uli
No disks are found, even though the link (on ata1) is detected.
Verified both with an x86 and an x86_64 kernel, and both 2.6.15-rc5 and
2.6.15-rc5-mm2.
Any ideas?
next reply other threads:[~2005-12-14 14:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-14 14:01 Bernhard Rosenkraenzer [this message]
2005-12-14 17:11 ` sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board Randy.Dunlap
2005-12-14 21:11 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200512141501.10093.bero@arklinux.org \
--to=bero@arklinux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox