* linux 2.6.14.4 sparc compile problem @ 2005-12-16 13:33 Gerhard Mack 2005-12-16 22:21 ` Adrian Bunk 0 siblings, 1 reply; 7+ messages in thread From: Gerhard Mack @ 2005-12-16 13:33 UTC (permalink / raw) To: linux-kernel Hello, I tried to compile kernel 2.6.14.4 on my sparc and I got this: drivers/built-in.o(.init.text+0x1184): In function `rtc_init': : undefined reference to `ebus_chain' drivers/built-in.o(.init.text+0x1188): In function `rtc_init': : undefined reference to `ebus_chain' drivers/built-in.o(.init.text+0x1190): In function `rtc_init': : undefined reference to `isa_chain' drivers/built-in.o(.init.text+0x11d4): In function `rtc_init': : undefined reference to `isa_chain' drivers/built-in.o(.init.text+0x11d8): In function `rtc_init': : undefined reference to `isa_chain' make: *** [.tmp_vmlinux1] Error 1 -- Gerhard Mack gmack@innerfire.net <>< As a computer I find your faith in technology amusing. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: linux 2.6.14.4 sparc compile problem 2005-12-16 13:33 linux 2.6.14.4 sparc compile problem Gerhard Mack @ 2005-12-16 22:21 ` Adrian Bunk 2005-12-17 0:10 ` Gerhard Mack 0 siblings, 1 reply; 7+ messages in thread From: Adrian Bunk @ 2005-12-16 22:21 UTC (permalink / raw) To: Gerhard Mack; +Cc: linux-kernel, sparclinux On Fri, Dec 16, 2005 at 08:33:48AM -0500, Gerhard Mack wrote: > Hello, > > I tried to compile kernel 2.6.14.4 on my sparc and I got this: > > drivers/built-in.o(.init.text+0x1184): In function `rtc_init': > : undefined reference to `ebus_chain' > drivers/built-in.o(.init.text+0x1188): In function `rtc_init': > : undefined reference to `ebus_chain' > drivers/built-in.o(.init.text+0x1190): In function `rtc_init': > : undefined reference to `isa_chain' > drivers/built-in.o(.init.text+0x11d4): In function `rtc_init': > : undefined reference to `isa_chain' > drivers/built-in.o(.init.text+0x11d8): In function `rtc_init': > : undefined reference to `isa_chain' > make: *** [.tmp_vmlinux1] Error 1 Please send your .config . > Gerhard Mack cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: linux 2.6.14.4 sparc compile problem 2005-12-16 22:21 ` Adrian Bunk @ 2005-12-17 0:10 ` Gerhard Mack 2005-12-17 14:10 ` [2.6 patch] on sparc{,64}, RTC must depend on PCI Adrian Bunk 0 siblings, 1 reply; 7+ messages in thread From: Gerhard Mack @ 2005-12-17 0:10 UTC (permalink / raw) To: Adrian Bunk; +Cc: linux-kernel, sparclinux [-- Attachment #1: Type: TEXT/PLAIN, Size: 1277 bytes --] I always forget that for some reason. If I disable CONFIG_RTC it compiles cleanly. Gerhard On Fri, 16 Dec 2005, Adrian Bunk wrote: > Date: Fri, 16 Dec 2005 23:21:54 +0100 > From: Adrian Bunk <bunk@stusta.de> > To: Gerhard Mack <gmack@innerfire.net> > Cc: linux-kernel@vger.kernel.org, sparclinux@vger.kernel.org > Subject: Re: linux 2.6.14.4 sparc compile problem > > On Fri, Dec 16, 2005 at 08:33:48AM -0500, Gerhard Mack wrote: > > Hello, > > > > I tried to compile kernel 2.6.14.4 on my sparc and I got this: > > > > drivers/built-in.o(.init.text+0x1184): In function `rtc_init': > > : undefined reference to `ebus_chain' > > drivers/built-in.o(.init.text+0x1188): In function `rtc_init': > > : undefined reference to `ebus_chain' > > drivers/built-in.o(.init.text+0x1190): In function `rtc_init': > > : undefined reference to `isa_chain' > > drivers/built-in.o(.init.text+0x11d4): In function `rtc_init': > > : undefined reference to `isa_chain' > > drivers/built-in.o(.init.text+0x11d8): In function `rtc_init': > > : undefined reference to `isa_chain' > > make: *** [.tmp_vmlinux1] Error 1 > > Please send your .config . > > > Gerhard Mack > > cu > Adrian > > -- Gerhard Mack gmack@innerfire.net <>< As a computer I find your faith in technology amusing. [-- Attachment #2: Type: TEXT/PLAIN, Size: 15817 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14.4 # Fri Dec 16 19:07:03 2005 # CONFIG_SPARC64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_TIME_INTERPOLATION=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_SPARC64_PAGE_SIZE_8KB=y # CONFIG_SPARC64_PAGE_SIZE_64KB is not set # CONFIG_SPARC64_PAGE_SIZE_512KB is not set # CONFIG_SPARC64_PAGE_SIZE_4MB is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # # CONFIG_MODULES is not set CONFIG_SYSVIPC_COMPAT=y # # General machine setup # CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_NR_CPUS=32 # CONFIG_CPU_FREQ is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set CONFIG_SUN_OPENPROMFS=y CONFIG_SPARC32_COMPAT=y CONFIG_COMPAT=y CONFIG_UID16=y CONFIG_BINFMT_ELF32=y # CONFIG_BINFMT_AOUT32 is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_SOLARIS_EMUL is not set # CONFIG_CMDLINE_BOOL is not set # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y CONFIG_INET6_TUNNEL=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_CHR_DEV_OSST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_SUNESP=y # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y CONFIG_DM_ZERO=y CONFIG_DM_MULTIPATH=y CONFIG_DM_MULTIPATH_EMC=y # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # I2O device support # # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_SUNLANCE is not set CONFIG_HAPPYMEAL=y # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # # Ethernet (1000 Mbit) # # CONFIG_MYRI_SBUS is not set # # Ethernet (10000 Mbit) # # # Token Ring devices # # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # # Non-8250 serial port support # CONFIG_SERIAL_SUNCORE=y CONFIG_SERIAL_SUNZILOG=y # CONFIG_SERIAL_SUNZILOG_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # # CONFIG_RAW_DRIVER is not set # # TPM devices # # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # # Multimedia Capabilities Port drivers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_BW2 is not set # CONFIG_FB_CG3 is not set # CONFIG_FB_CG6 is not set CONFIG_FB_SBUS=y CONFIG_FB_FFB=y # CONFIG_FB_TCX is not set # CONFIG_FB_CG14 is not set # CONFIG_FB_P9100 is not set # CONFIG_FB_LEO is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_PROM_CONSOLE=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_SUN_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # # SN Devices # # # Misc Linux/SPARC drivers # CONFIG_SUN_OPENPROMIO=y CONFIG_SUN_MOSTEK_RTC=y CONFIG_OBP_FLASH=y # CONFIG_SUN_BPP is not set # # Fibre Channel support # CONFIG_FC4=y # # FC4 drivers # CONFIG_FC4_SOC=y CONFIG_FC4_SOCAL=y # # FC4 targets # CONFIG_SCSI_PLUTO=y CONFIG_SCSI_FCAL=y # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=y CONFIG_CODA_FS_OLD_API=y # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=y CONFIG_NLS_CODEPAGE_775=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=y CONFIG_NLS_CODEPAGE_860=y CONFIG_NLS_CODEPAGE_861=y CONFIG_NLS_CODEPAGE_862=y CONFIG_NLS_CODEPAGE_863=y CONFIG_NLS_CODEPAGE_864=y CONFIG_NLS_CODEPAGE_865=y CONFIG_NLS_CODEPAGE_866=y CONFIG_NLS_CODEPAGE_869=y CONFIG_NLS_CODEPAGE_936=y CONFIG_NLS_CODEPAGE_950=y CONFIG_NLS_CODEPAGE_932=y CONFIG_NLS_CODEPAGE_949=y CONFIG_NLS_CODEPAGE_874=y CONFIG_NLS_ISO8859_8=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_3=y CONFIG_NLS_ISO8859_4=y CONFIG_NLS_ISO8859_5=y CONFIG_NLS_ISO8859_6=y CONFIG_NLS_ISO8859_7=y CONFIG_NLS_ISO8859_9=y CONFIG_NLS_ISO8859_13=y CONFIG_NLS_ISO8859_14=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_KOI8_R=y CONFIG_NLS_KOI8_U=y CONFIG_NLS_UTF8=y # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_DEBUG_BUGVERBOSE=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y ^ permalink raw reply [flat|nested] 7+ messages in thread
* [2.6 patch] on sparc{,64}, RTC must depend on PCI 2005-12-17 0:10 ` Gerhard Mack @ 2005-12-17 14:10 ` Adrian Bunk 2005-12-19 22:52 ` David S. Miller 0 siblings, 1 reply; 7+ messages in thread From: Adrian Bunk @ 2005-12-17 14:10 UTC (permalink / raw) To: Gerhard Mack, wli, davem, ecd, jj, anton; +Cc: linux-kernel, sparclinux On Fri, Dec 16, 2005 at 07:10:05PM -0500, Gerhard Mack wrote: > > I always forget that for some reason. > If I disable CONFIG_RTC it compiles cleanly. That's expected since this is the driver that breaks the build. The patch below adds the dependency of CONFIG_RTC on CONFIG_PCI on the sparc architecture. > Gerhard cu Adrian BTW: @sparc maintainers: Is there any reason against introducing a SPARC Kconfig symbol that is set on both the sparc and sparc64 architectures? <-- snip --> On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: Adrian Bunk <bunk@stusta.de> --- linux-2.6.14.4/drivers/char/Kconfig.old 2005-12-17 15:03:06.000000000 +0100 +++ linux-2.6.14.4/drivers/char/Kconfig 2005-12-17 15:03:33.000000000 +0100 @@ -687,7 +687,7 @@ config RTC tristate "Enhanced Real Time Clock Support" - depends on !PPC32 && !PARISC && !IA64 && !M68K + depends on !PPC32 && !PARISC && !IA64 && !M68K && (!(SPARC32 || SPARC64) || PCI) ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [2.6 patch] on sparc{,64}, RTC must depend on PCI 2005-12-17 14:10 ` [2.6 patch] on sparc{,64}, RTC must depend on PCI Adrian Bunk @ 2005-12-19 22:52 ` David S. Miller 2005-12-23 2:15 ` [2.6 patch] introduce a SPARC Kconfig symbol Adrian Bunk 0 siblings, 1 reply; 7+ messages in thread From: David S. Miller @ 2005-12-19 22:52 UTC (permalink / raw) To: bunk; +Cc: gmack, wli, ecd, jj, anton, linux-kernel, sparclinux From: Adrian Bunk <bunk@stusta.de> Date: Sat, 17 Dec 2005 15:10:49 +0100 > On sparc and sparc64, the rtc driver doesn't compile with PCI support > disabled. Applied, thanks Adrian. > BTW: @sparc maintainers: > Is there any reason against introducing a SPARC Kconfig symbol > that is set on both the sparc and sparc64 architectures? That's a great idea, I thought we already did this in fact :) ^ permalink raw reply [flat|nested] 7+ messages in thread
* [2.6 patch] introduce a SPARC Kconfig symbol 2005-12-19 22:52 ` David S. Miller @ 2005-12-23 2:15 ` Adrian Bunk 2005-12-23 5:04 ` David S. Miller 0 siblings, 1 reply; 7+ messages in thread From: Adrian Bunk @ 2005-12-23 2:15 UTC (permalink / raw) To: David S. Miller; +Cc: gmack, wli, ecd, jj, anton, linux-kernel, sparclinux On Mon, Dec 19, 2005 at 02:52:54PM -0800, David S. Miller wrote: >... > > BTW: @sparc maintainers: > > Is there any reason against introducing a SPARC Kconfig symbol > > that is set on both the sparc and sparc64 architectures? > > That's a great idea, I thought we already did this in fact :) Patch below. cu Adrian <-- snip --> Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Except for all bugs this patch deliberately introduces ;-) it shouldn't cause any visible change. Signed-off-by: Adrian Bunk <bunk@stusta.de> --- arch/sparc/Kconfig | 4 ++++ arch/sparc64/Kconfig | 4 ++++ drivers/char/Kconfig | 4 ++-- drivers/char/keyboard.c | 10 +++++----- drivers/fc4/Kconfig | 8 ++++---- drivers/input/misc/Kconfig | 2 +- drivers/input/serio/i8042.h | 2 +- drivers/mtd/maps/Kconfig | 2 +- drivers/serial/Kconfig | 10 +++++----- drivers/video/Kconfig | 10 +++++----- drivers/video/console/Kconfig | 20 ++++++++++---------- drivers/video/logo/Kconfig | 2 +- fs/partitions/Kconfig | 2 +- sound/sparc/Kconfig | 2 +- 14 files changed, 45 insertions(+), 37 deletions(-) --- linux-git/arch/sparc/Kconfig.old 2005-12-23 01:59:27.000000000 +0100 +++ linux-git/arch/sparc/Kconfig 2005-12-23 01:59:45.000000000 +0100 @@ -55,6 +55,10 @@ depends on SMP default "32" +config SPARC + bool + default y + # Identify this as a Sparc32 build config SPARC32 bool --- linux-git/arch/sparc64/Kconfig.old 2005-12-23 01:59:55.000000000 +0100 +++ linux-git/arch/sparc64/Kconfig 2005-12-23 02:00:14.000000000 +0100 @@ -5,6 +5,10 @@ mainmenu "Linux/UltraSPARC Kernel Configuration" +config SPARC + bool + default y + config SPARC64 bool default y --- linux-git/drivers/char/Kconfig.old 2005-12-23 02:02:05.000000000 +0100 +++ linux-git/drivers/char/Kconfig 2005-12-23 02:04:01.000000000 +0100 @@ -687,7 +687,7 @@ config RTC tristate "Enhanced Real Time Clock Support" - depends on !PPC32 && !PARISC && !IA64 && !M68K && (!(SPARC32 || SPARC64) || PCI) + depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -735,7 +735,7 @@ config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64 + depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you --- linux-git/drivers/char/keyboard.c.old 2005-12-23 02:02:56.000000000 +0100 +++ linux-git/drivers/char/keyboard.c 2005-12-23 02:16:03.000000000 +0100 @@ -930,8 +930,8 @@ } #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ - defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC32) ||\ - defined(CONFIG_SPARC64) || defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ + defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ + defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ @@ -958,7 +958,7 @@ extern int mac_hid_mouse_emulate_buttons(int, int, int); #endif /* CONFIG_MAC_EMUMOUSEBTN */ -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC static int sparc_l1_a_state = 0; extern void sun_do_break(void); #endif @@ -1045,7 +1045,7 @@ if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT) sysrq_alt = down; -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC if (keycode == KEY_STOP) sparc_l1_a_state = down; #endif @@ -1072,7 +1072,7 @@ return; } #endif -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC if (keycode == KEY_A && sparc_l1_a_state) { sparc_l1_a_state = 0; sun_do_break(); --- linux-git/drivers/fc4/Kconfig.old 2005-12-23 02:04:15.000000000 +0100 +++ linux-git/drivers/fc4/Kconfig 2005-12-23 02:04:40.000000000 +0100 @@ -26,7 +26,7 @@ config FC4_SOC tristate "Sun SOC/Sbus" - depends on FC4!=n && (SPARC32 || SPARC64) + depends on FC4!=n && SPARC help Serial Optical Channel is an interface card with one or two Fibre Optic ports, each of which can be connected to a disk array. Note @@ -38,7 +38,7 @@ config FC4_SOCAL tristate "Sun SOC+ (aka SOCAL)" - depends on FC4!=n && (SPARC32 || SPARC64) + depends on FC4!=n && SPARC ---help--- Serial Optical Channel Plus is an interface card with up to two Fibre Optic ports. This card supports FC Arbitrated Loop (usually @@ -62,7 +62,7 @@ be called pluto. config SCSI_FCAL - tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64 + tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC depends on FC4!=n && SCSI help This driver drives FC-AL disks connected through a Fibre Channel @@ -75,7 +75,7 @@ config SCSI_FCAL prompt "Generic FC-AL disk driver" - depends on FC4!=n && SCSI && !SPARC32 && !SPARC64 + depends on FC4!=n && SCSI && !SPARC endmenu --- linux-git/drivers/input/misc/Kconfig.old 2005-12-23 02:04:49.000000000 +0100 +++ linux-git/drivers/input/misc/Kconfig 2005-12-23 02:04:56.000000000 +0100 @@ -26,7 +26,7 @@ config INPUT_SPARCSPKR tristate "SPARC Speaker support" - depends on PCI && (SPARC32 || SPARC64) + depends on PCI && SPARC help Say Y here if you want the standard Speaker on Sparc PCI systems to be used for bells and whistles. --- linux-git/drivers/input/serio/i8042.h.old 2005-12-23 02:05:07.000000000 +0100 +++ linux-git/drivers/input/serio/i8042.h 2005-12-23 02:05:19.000000000 +0100 @@ -21,7 +21,7 @@ #include "i8042-ip22io.h" #elif defined(CONFIG_PPC) #include "i8042-ppcio.h" -#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#elif defined(CONFIG_SPARC) #include "i8042-sparcio.h" #elif defined(CONFIG_X86) || defined(CONFIG_IA64) #include "i8042-x86ia64io.h" --- linux-git/drivers/mtd/maps/Kconfig.old 2005-12-23 02:05:31.000000000 +0100 +++ linux-git/drivers/mtd/maps/Kconfig 2005-12-23 02:05:57.000000000 +0100 @@ -62,7 +62,7 @@ config MTD_SUN_UFLASH tristate "Sun Microsystems userflash support" - depends on (SPARC32 || SPARC64) && MTD_CFI + depends on SPARC && MTD_CFI help This provides a 'mapping' driver which supports the way in which user-programmable flash chips are connected on various --- linux-git/drivers/serial/Kconfig.old 2005-12-23 02:06:27.000000000 +0100 +++ linux-git/drivers/serial/Kconfig 2005-12-23 02:06:59.000000000 +0100 @@ -10,7 +10,7 @@ # The new 8250/16550 serial drivers config SERIAL_8250 tristate "8250/16550 and compatible serial support" - depends on (BROKEN || !(SPARC64 || SPARC32)) + depends on (BROKEN || !SPARC) select SERIAL_CORE ---help--- This selects whether you want to include the driver for the standard @@ -469,14 +469,14 @@ config SERIAL_SUNCORE bool - depends on SPARC32 || SPARC64 + depends on SPARC select SERIAL_CORE select SERIAL_CORE_CONSOLE default y config SERIAL_SUNZILOG tristate "Sun Zilog8530 serial support" - depends on SPARC32 || SPARC64 + depends on SPARC help This driver supports the Zilog8530 serial ports found on many Sparc systems. Say Y or M if you want to be able to these serial ports. @@ -491,7 +491,7 @@ config SERIAL_SUNSU tristate "Sun SU serial support" - depends on (SPARC32 || SPARC64) && PCI + depends on SPARC && PCI help This driver supports the 8250 serial ports that run the keyboard and mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able @@ -547,7 +547,7 @@ config SERIAL_SUNSAB tristate "Sun Siemens SAB82532 serial support" - depends on (SPARC32 || SPARC64) && PCI + depends on SPARC && PCI help This driver supports the Siemens SAB82532 DUSCC serial ports on newer (PCI) UltraSPARC systems. Say Y or M if you want to be able to these --- linux-git/drivers/video/Kconfig.old 2005-12-23 02:07:15.000000000 +0100 +++ linux-git/drivers/video/Kconfig 2005-12-23 02:07:56.000000000 +0100 @@ -536,13 +536,13 @@ config FB_SBUS bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) + depends on (FB = y) && SPARC help Say Y if you want support for SBUS or UPA based frame buffer device. config FB_BW2 bool "BWtwo support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -551,7 +551,7 @@ config FB_CG3 bool "CGthree support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -560,7 +560,7 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help @@ -1268,7 +1268,7 @@ config FB_PCI bool "PCI framebuffers" - depends on (FB = y) && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" --- linux-git/drivers/video/console/Kconfig.old 2005-12-23 02:08:08.000000000 +0100 +++ linux-git/drivers/video/console/Kconfig 2005-12-23 02:18:30.000000000 +0100 @@ -6,7 +6,7 @@ config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !ARCH_VERSATILE default y help Saying Y here will allow you to use Linux in text mode through a @@ -68,7 +68,7 @@ config PROM_CONSOLE bool "PROM console" - depends on SPARC32 || SPARC64 + depends on SPARC help Say Y to build a console driver for Sun machines that uses the terminal emulation built into their console PROMS. @@ -136,7 +136,7 @@ config FONT_8x8 bool "VGA 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS + default y if !SPARC && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the text console 80x50 (and higher) modes). @@ -150,7 +150,7 @@ config FONT_8x16 bool "VGA 8x16 font" if FONTS depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON - default y if !SPARC32 && !SPARC64 && !FONTS + default y if !SPARC && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the VGA text console 80x25 mode. @@ -160,7 +160,7 @@ config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && MAC + default y if !SPARC && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac framebuffer drivers don't support this one at all. @@ -176,7 +176,7 @@ config FONT_PEARL_8x8 bool "Pearl (old m68k) console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA + default y if !SPARC && !FONTS && AMIGA help Small console font with PC-style control-character and high-half glyphs. @@ -184,24 +184,24 @@ config FONT_ACORN_8x8 bool "Acorn console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN + default y if !SPARC && !FONTS && ARM && ARCH_ACORN help Small console font with PC-style control characters and high-half glyphs. config FONT_MINI_4x6 bool "Mini 4x6 font" - depends on !SPARC32 && !SPARC64 && FONTS + depends on !SPARC && FONTS config FONT_SUN8x16 bool "Sparc console 8x16 font" - depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) + depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC) help This is the high resolution console font for Sun machines. Say Y. config FONT_SUN12x22 bool "Sparc console 12x22 font (not supported by all drivers)" - depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) + depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC) help This is the high resolution console font for Sun machines with very big letters (like the letters used in the SPARC PROM). If the --- linux-git/drivers/video/logo/Kconfig.old 2005-12-23 02:12:31.000000000 +0100 +++ linux-git/drivers/video/logo/Kconfig 2005-12-23 02:12:40.000000000 +0100 @@ -47,7 +47,7 @@ config LOGO_SUN_CLUT224 bool "224-color Sun Linux logo" - depends on LOGO && (SPARC32 || SPARC64) + depends on LOGO && SPARC default y config LOGO_SUPERH_MONO --- linux-git/fs/partitions/Kconfig.old 2005-12-23 02:12:50.000000000 +0100 +++ linux-git/fs/partitions/Kconfig 2005-12-23 02:13:00.000000000 +0100 @@ -203,7 +203,7 @@ config SUN_PARTITION bool "Sun partition tables support" if PARTITION_ADVANCED - default y if (SPARC32 || SPARC64 || SUN3 || SUN3X) + default y if (SPARC || SUN3 || SUN3X) ---help--- Like most systems, SunOS uses its own hard disk partition table format, incompatible with all others. Saying Y here allows you to --- linux-git/sound/sparc/Kconfig.old 2005-12-23 02:13:11.000000000 +0100 +++ linux-git/sound/sparc/Kconfig 2005-12-23 02:13:18.000000000 +0100 @@ -1,7 +1,7 @@ # ALSA Sparc drivers menu "ALSA Sparc devices" - depends on SND!=n && (SPARC32 || SPARC64) + depends on SND!=n && SPARC config SND_SUN_AMD7930 tristate "Sun AMD7930" ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [2.6 patch] introduce a SPARC Kconfig symbol 2005-12-23 2:15 ` [2.6 patch] introduce a SPARC Kconfig symbol Adrian Bunk @ 2005-12-23 5:04 ` David S. Miller 0 siblings, 0 replies; 7+ messages in thread From: David S. Miller @ 2005-12-23 5:04 UTC (permalink / raw) To: bunk; +Cc: gmack, wli, ecd, jj, anton, linux-kernel, sparclinux From: Adrian Bunk <bunk@stusta.de> Date: Fri, 23 Dec 2005 03:15:26 +0100 > Introduce a Kconfig symbol SPARC that is defined on both the sparc and > sparc64 architectures. > > This symbol makes some dependencies more readable. > > Except for all bugs this patch deliberately introduces ;-) it shouldn't > cause any visible change. > > > Signed-off-by: Adrian Bunk <bunk@stusta.de> :-) Applied, thanks Adrian. ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-12-23 5:05 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-16 13:33 linux 2.6.14.4 sparc compile problem Gerhard Mack
2005-12-16 22:21 ` Adrian Bunk
2005-12-17 0:10 ` Gerhard Mack
2005-12-17 14:10 ` [2.6 patch] on sparc{,64}, RTC must depend on PCI Adrian Bunk
2005-12-19 22:52 ` David S. Miller
2005-12-23 2:15 ` [2.6 patch] introduce a SPARC Kconfig symbol Adrian Bunk
2005-12-23 5:04 ` David S. Miller
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox