* No Coax digital out with SB Live! and 2.6.15
@ 2006-01-03 18:08 Tino Keitel
2006-01-04 7:26 ` Tino Keitel
0 siblings, 1 reply; 6+ messages in thread
From: Tino Keitel @ 2006-01-03 18:08 UTC (permalink / raw)
To: linux-kernel
Hi folks,
since I upgraded to 2.6.15, the Coax digital output of my SB Live!
stays silent. Analog output works. After reverting to 2.6.14.3 the
digital output works again. Does anyone have a solution for this or at
least the same problem?
Regards,
Tino
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No Coax digital out with SB Live! and 2.6.15
2006-01-03 18:08 No Coax digital out with SB Live! and 2.6.15 Tino Keitel
@ 2006-01-04 7:26 ` Tino Keitel
2006-01-04 7:36 ` Tino Keitel
0 siblings, 1 reply; 6+ messages in thread
From: Tino Keitel @ 2006-01-04 7:26 UTC (permalink / raw)
To: linux-kernel
On Tue, Jan 03, 2006 at 19:08:31 +0100, Tino Keitel wrote:
> Hi folks,
>
> since I upgraded to 2.6.15, the Coax digital output of my SB Live!
> stays silent. Analog output works. After reverting to 2.6.14.3 the
> digital output works again. Does anyone have a solution for this or at
> least the same problem?
I just tried alsa-driver 1.0.11-rc2 and now the digital out works again.
Regards,
Tino
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No Coax digital out with SB Live! and 2.6.15
2006-01-04 7:26 ` Tino Keitel
@ 2006-01-04 7:36 ` Tino Keitel
2006-01-05 22:01 ` Lee Revell
0 siblings, 1 reply; 6+ messages in thread
From: Tino Keitel @ 2006-01-04 7:36 UTC (permalink / raw)
To: linux-kernel
On Wed, Jan 04, 2006 at 08:26:18 +0100, Tino Keitel wrote:
> On Tue, Jan 03, 2006 at 19:08:31 +0100, Tino Keitel wrote:
> > Hi folks,
> >
> > since I upgraded to 2.6.15, the Coax digital output of my SB Live!
> > stays silent. Analog output works. After reverting to 2.6.14.3 the
> > digital output works again. Does anyone have a solution for this or at
> > least the same problem?
>
> I just tried alsa-driver 1.0.11-rc2 and now the digital out works again.
alsa-driver 1.0.10 works, too.
Regards,
Tino
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No Coax digital out with SB Live! and 2.6.15
2006-01-04 7:36 ` Tino Keitel
@ 2006-01-05 22:01 ` Lee Revell
2006-01-06 0:09 ` Tino Keitel
0 siblings, 1 reply; 6+ messages in thread
From: Lee Revell @ 2006-01-05 22:01 UTC (permalink / raw)
To: Tino Keitel; +Cc: linux-kernel
On Wed, 2006-01-04 at 08:36 +0100, Tino Keitel wrote:
> On Wed, Jan 04, 2006 at 08:26:18 +0100, Tino Keitel wrote:
> > On Tue, Jan 03, 2006 at 19:08:31 +0100, Tino Keitel wrote:
> > > Hi folks,
> > >
> > > since I upgraded to 2.6.15, the Coax digital output of my SB Live!
> > > stays silent. Analog output works. After reverting to 2.6.14.3 the
> > > digital output works again. Does anyone have a solution for this or at
> > > least the same problem?
> >
> > I just tried alsa-driver 1.0.11-rc2 and now the digital out works again.
>
> alsa-driver 1.0.10 works, too.
Are you sure it was not a mixer settings issue?
If you can confirm that this is a regression try to narrow it down by
code inspection or binary search by date with ALSA CVS it can be fixed
for 2.6.15.x.
Lee
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No Coax digital out with SB Live! and 2.6.15
2006-01-05 22:01 ` Lee Revell
@ 2006-01-06 0:09 ` Tino Keitel
2006-01-06 9:49 ` Tino Keitel
0 siblings, 1 reply; 6+ messages in thread
From: Tino Keitel @ 2006-01-06 0:09 UTC (permalink / raw)
To: Lee Revell; +Cc: linux-kernel
On Thu, Jan 05, 2006 at 17:01:17 -0500, Lee Revell wrote:
> On Wed, 2006-01-04 at 08:36 +0100, Tino Keitel wrote:
> > On Wed, Jan 04, 2006 at 08:26:18 +0100, Tino Keitel wrote:
> > > On Tue, Jan 03, 2006 at 19:08:31 +0100, Tino Keitel wrote:
> > > > Hi folks,
> > > >
> > > > since I upgraded to 2.6.15, the Coax digital output of my SB Live!
> > > > stays silent. Analog output works. After reverting to 2.6.14.3 the
> > > > digital output works again. Does anyone have a solution for this or at
> > > > least the same problem?
> > >
> > > I just tried alsa-driver 1.0.11-rc2 and now the digital out works again.
> >
> > alsa-driver 1.0.10 works, too.
>
> Are you sure it was not a mixer settings issue?
>
> If you can confirm that this is a regression try to narrow it down by
> code inspection or binary search by date with ALSA CVS it can be fixed
> for 2.6.15.x.
I booted with the 2.6.15 driver and got a silent digital out, like
reported. The headphone which is plugged into the analog output gives
sound.
If I load the 1.0.10 driver, sound works in xmms. If I unload it and
reload the original 2.6.15 driver, sound still works. If I reboot with
the original 2.6.15 driver, the digital out is silent again, while the
analog output works.
However, if I now chose a specific output device in xmms, hw:0,2,
instead of the default device, digital out gives sound. With the 1.0.10
driver, this hw:0,2 device stays completely silent (digital and
analog). With this version, the hw:0,0 device (which seems to be the
default) gives analog and digital sound.
So IMHO this mixup of the devices is a regression, since it breaks
existing setups and is also fixed in newer versions. It would be nice
the see a fix for this in 2.6.15.x.
Regards,
Tino
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No Coax digital out with SB Live! and 2.6.15
2006-01-06 0:09 ` Tino Keitel
@ 2006-01-06 9:49 ` Tino Keitel
0 siblings, 0 replies; 6+ messages in thread
From: Tino Keitel @ 2006-01-06 9:49 UTC (permalink / raw)
To: Lee Revell, linux-kernel
On Fri, Jan 06, 2006 at 01:09:21 +0100, Tino Keitel wrote:
[...]
> I booted with the 2.6.15 driver and got a silent digital out, like
> reported. The headphone which is plugged into the analog output gives
> sound.
>
> If I load the 1.0.10 driver, sound works in xmms. If I unload it and
> reload the original 2.6.15 driver, sound still works. If I reboot with
> the original 2.6.15 driver, the digital out is silent again, while the
> analog output works.
>
> However, if I now chose a specific output device in xmms, hw:0,2,
> instead of the default device, digital out gives sound. With the 1.0.10
> driver, this hw:0,2 device stays completely silent (digital and
> analog). With this version, the hw:0,0 device (which seems to be the
> default) gives analog and digital sound.
The solution looks more simple: just removing and reloading the
original snd-emu10k1 module reorders the devices so that the default
device gives sound on the digital output. The driver is blacklisted in
udev and loaded at boot time in /etc/modules, so the module-init-tools
initscript will load them. However, I have no idea why it behaves
different if loaded at boot time than when reloaded later.
Regards,
Tino
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-01-06 9:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-03 18:08 No Coax digital out with SB Live! and 2.6.15 Tino Keitel
2006-01-04 7:26 ` Tino Keitel
2006-01-04 7:36 ` Tino Keitel
2006-01-05 22:01 ` Lee Revell
2006-01-06 0:09 ` Tino Keitel
2006-01-06 9:49 ` Tino Keitel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox