[2.6 patch] drivers/usb/media/w9968cf.c: remove hooks for the vpp module

[Adrian Bunk <bunk@stusta.de>]

- the w9968cf-vpp module is not intended for inclusion into the kernel
- the upstream w9968cf package shipping the w9968cf-vpp module suggests
  to simply replace the w9968cf module shipped with the kernel

Therefore, there seems to be no good reason spending some bytes of 
kernel memory for hooks for the w9968cf-vpp module.


Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 drivers/usb/media/w9968cf.c     |  128 --------------------------------
 drivers/usb/media/w9968cf.h     |    1 
 drivers/usb/media/w9968cf_vpp.h |    3 
 3 files changed, 1 insertion(+), 131 deletions(-)

--- linux-2.6.15-mm1-full/drivers/usb/media/w9968cf_vpp.h.old	2006-01-06 02:26:01.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/usb/media/w9968cf_vpp.h	2006-01-06 02:26:08.000000000 +0100
@@ -37,7 +37,4 @@
 	u8 busy; /* read-only flag: module is/is not in use */
 };
 
-extern int w9968cf_vppmod_register(struct w9968cf_vpp_t*);
-extern int w9968cf_vppmod_deregister(struct w9968cf_vpp_t*);
-
 #endif /* _W9968CF_VPP_H_ */
--- linux-2.6.15-mm1-full/drivers/usb/media/w9968cf.h.old	2006-01-06 02:52:03.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/usb/media/w9968cf.h	2006-01-06 02:52:08.000000000 +0100
@@ -195,7 +195,6 @@
 };
 
 static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_MUTEX(w9968cf_vppmod_lock);
 static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
 
 static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
--- linux-2.6.15-mm1-full/drivers/usb/media/w9968cf.c.old	2006-01-06 02:26:15.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/usb/media/w9968cf.c	2006-01-06 03:01:55.000000000 +0100
@@ -62,7 +62,6 @@
 MODULE_SUPPORTED_DEVICE("Video");
 
 static int ovmod_load = W9968CF_OVMOD_LOAD;
-static int vppmod_load = W9968CF_VPPMOD_LOAD;
 static unsigned short simcams = W9968CF_SIMCAMS;
 static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
 static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] = 
@@ -107,7 +106,6 @@
 
 #ifdef CONFIG_KMOD
 module_param(ovmod_load, bool, 0644);
-module_param(vppmod_load, bool, 0444);
 #endif
 module_param(simcams, ushort, 0644);
 module_param_array(video_nr, short, &param_nv[0], 0444);
@@ -150,18 +148,6 @@
                  "\ninto memory."
                  "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
                  "\n");
-MODULE_PARM_DESC(vppmod_load, 
-                 "\n<0|1> Automatic 'w9968cf-vpp' module loading."
-                 "\n0 disabled, 1 enabled."
-                 "\nIf enabled, every time an application attempts to open a"
-                 "\ncamera, 'insmod' searches for the video post-processing"
-                 "\nmodule in the system and loads it automatically (if"
-                 "\npresent). The optional 'w9968cf-vpp' module adds extra"
-                 "\n image manipulation functions to the 'w9968cf' module,like"
-                 "\nsoftware up-scaling,colour conversions and video decoding"
-                 "\nfor very high frame rates."
-                 "\nDefault value is "__MODULE_STRING(W9968CF_VPPMOD_LOAD)"."
-                 "\n");
 #endif
 MODULE_PARM_DESC(simcams, 
                  "\n<n> Number of cameras allowed to stream simultaneously."
@@ -492,10 +478,6 @@
 static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
 static void w9968cf_release_resources(struct w9968cf_device*);
 
-/* Intermodule communication */
-static int w9968cf_vppmod_detect(struct w9968cf_device*);
-static void w9968cf_vppmod_release(struct w9968cf_device*);
-
 
 
 /****************************************************************************
@@ -2737,9 +2719,7 @@
 	cam->streaming = 0;
 	cam->misconfigured = 0;
 
-	if (!w9968cf_vpp)
-		if ((err = w9968cf_vppmod_detect(cam)))
-			goto out;
+	w9968cf_adjust_configuration(cam);
 
 	if ((err = w9968cf_allocate_memory(cam)))
 		goto deallocate_memory;
@@ -2766,7 +2746,6 @@
 
 deallocate_memory:
 	w9968cf_deallocate_memory(cam);
-out:
 	DBG(2, "Failed to open the video device")
 	up(&cam->dev_sem);
 	up_read(&w9968cf_disconnect);
@@ -2784,8 +2763,6 @@
 
 	w9968cf_stop_transfer(cam);
 
-	w9968cf_vppmod_release(cam);
-
 	if (cam->disconnected) {
 		w9968cf_release_resources(cam);
 		up(&cam->dev_sem);
@@ -3681,106 +3658,6 @@
  * Module init, exit and intermodule communication                          *
  ****************************************************************************/
 
-static int w9968cf_vppmod_detect(struct w9968cf_device* cam)
-{
-	if (!w9968cf_vpp)
-		if (vppmod_load)
-			request_module("w9968cf-vpp");
-
-	down(&w9968cf_vppmod_lock);
-
-	if (!w9968cf_vpp) {
-		DBG(4, "Video post-processing module not detected")
-		w9968cf_adjust_configuration(cam);
-		goto out;
-	}
-
-	if (!try_module_get(w9968cf_vpp->owner)) {
-		DBG(1, "Couldn't increment the reference count of "
-		       "the video post-processing module")
-		up(&w9968cf_vppmod_lock);
-		return -ENOSYS;
-	}
-
-	w9968cf_vpp->busy++;
-
-	DBG(5, "Video post-processing module detected")
-
-out:
-	up(&w9968cf_vppmod_lock);
-	return 0;
-}
-
-
-static void w9968cf_vppmod_release(struct w9968cf_device* cam)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (w9968cf_vpp && w9968cf_vpp->busy) {
-		module_put(w9968cf_vpp->owner);
-		w9968cf_vpp->busy--;
-		wake_up(&w9968cf_vppmod_wait);
-		DBG(5, "Video post-processing module released")
-	}
-
-	up(&w9968cf_vppmod_lock);
-}
-
-
-int w9968cf_vppmod_register(struct w9968cf_vpp_t* vpp)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (w9968cf_vpp) {
-		KDBG(1, "Video post-processing module already registered")
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	w9968cf_vpp = vpp;
-	w9968cf_vpp->busy = 0;
-
-	KDBG(2, "Video post-processing module registered")
-	up(&w9968cf_vppmod_lock);
-	return 0;
-}
-
-
-int w9968cf_vppmod_deregister(struct w9968cf_vpp_t* vpp)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (!w9968cf_vpp) {
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	if (w9968cf_vpp != vpp) {
-		KDBG(1, "Only the owner can unregister the video "
-		        "post-processing module")
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	if (w9968cf_vpp->busy) {
-		KDBG(2, "Video post-processing module busy. Wait for it to be "
-		        "released...")
-		up(&w9968cf_vppmod_lock);
-		wait_event(w9968cf_vppmod_wait, !w9968cf_vpp->busy);
-		w9968cf_vpp = NULL;
-		goto out;
-	}
-
-	w9968cf_vpp = NULL;
-
-	up(&w9968cf_vppmod_lock);
-
-out:
-	KDBG(2, "Video post-processing module unregistered")
-	return 0;
-}
-
-
 static int __init w9968cf_module_init(void)
 {
 	int err;
@@ -3810,6 +3687,3 @@
 module_init(w9968cf_module_init);
 module_exit(w9968cf_module_exit);
 
-
-EXPORT_SYMBOL(w9968cf_vppmod_register);
-EXPORT_SYMBOL(w9968cf_vppmod_deregister);