public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Re. 2.6.15-mm1
@ 2006-01-05 17:01 Alexander Gran
  2006-01-05 22:47 ` Andrew Morton
  0 siblings, 1 reply; 14+ messages in thread
From: Alexander Gran @ 2006-01-05 17:01 UTC (permalink / raw)
  To: Andrew Morton, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 3814 bytes --]

Hi,

just tried 2.6.15-mm1 on my thinkpad. Various aspects that didn't work / look 
good:
Jan  5 16:22:38 t40 kernel: pnp: PnP ACPI init
Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
Jan  5 16:22:39 t40 last message repeated 10 times
Jan  5 16:22:39 t40 kernel: pnp: PnP ACPI: found 0 devices
All over the place logs like this:
Jan  5 16:22:43 t40 kernel: **** SET: Misaligned resource pointer: f7db5502 
Type 07 Len 0
Unknown to me so far..
When X startet, the laptops crashed:
Jan  5 16:22:43 t40 kernel: <4>reiser4[syslogd(2729)]: disable_write_barrier 
(fs/reiser4/wander.c:233)[zam-1055]:
Jan  5 16:22:43 t40 kernel: WARNING: disabling write barrier
Jan  5 16:22:43 t40 kernel:
Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 
0xe0000000,0x4000000
Jan  5 16:22:48 t40 last message repeated 2 times
Jan  5 16:22:48 t40 kernel: agpgart: Found an AGP 2.0 compliant device at 
0000:00:00.0.
Jan  5 16:22:48 t40 kernel: c028b7cf
Jan  5 16:22:48 t40 kernel: Modules linked in: irtty_sir sir_dev cfq_iosched 
ehci_hcd uhci_hcd
Jan  5 16:22:48 t40 kernel: EIP:    0060:[<c028b7cf>]    Not tainted VLI
Jan  5 16:22:48 t40 kernel: EFLAGS: 00013202   (2.6.15-mm1)
Jan  5 16:22:48 t40 kernel:        <0>c028b9e9 f762ff08 00000002 00000000 
c19720ec 00000000 1f000217 c1a79400
Jan  5 16:22:48 t40 kernel:        <0>00000032 00000001 c028bfb5 c0297262 
c1a79400 c02972af 1f000207 c029727f
Jan  5 16:22:48 t40 kernel:  <3>[drm:drm_release] *ERROR* Device busy: 1 0
Jan  5 16:22:58 t40 kernel: SysRq : Emergency Sync
Jan  5 16:22:58 t40 kernel: <4>reiser4[pdflush(172)]: disable_write_barrier 
(fs/reiser4/wander.c:233)[zam-1055]:
Jan  5 16:22:58 t40 kernel: WARNING: disabling write barrier
Jan  5 16:22:59 t40 kernel:

Dunno why. Sysrq worked, however
lspci:
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O 
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller 
(rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 
EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface 
Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller 
(rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf 
[FireGL 9000] (rev 02)
0000:02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
Controller (rev 01)
0000:02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
Controller (rev 01)
0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet 
Controller (Mobile) (rev 03)
0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5211 802.11ab 
NIC (rev 01)

.config and full bootlog attached.


regards
Alex
-- 
Encrypted Mails welcome.
PGP-Key at http://zodiac.dnsalias.org/misc/pgpkey.asc | Key-ID: 0x6D7DD291

[-- Attachment #1.2: 15-mm1 --]
[-- Type: text/plain, Size: 31963 bytes --]

Jan  5 09:16:21 t40 kernel: Memory: 1033264k/1047872k available (3072k kernel code, 13804k reserved, 1176k data, 168k init, 130368k highmem)
Jan  5 09:16:21 t40 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan  5 09:16:21 t40 kernel: Calibrating delay using timer specific routine.. 3193.38 BogoMIPS (lpj=6386778)
Jan  5 09:16:21 t40 kernel: Mount-cache hash table entries: 512
Jan  5 09:16:21 t40 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan  5 09:16:21 t40 kernel: CPU: L2 cache: 1024K
Jan  5 09:16:21 t40 kernel: Intel machine check architecture supported.
Jan  5 09:16:21 t40 kernel: Intel machine check reporting enabled on CPU#0.
Jan  5 09:16:21 t40 kernel: mtrr: v2.0 (20020519)
Jan  5 09:16:21 t40 kernel: CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
Jan  5 09:16:21 t40 kernel: Enabling fast FPU save and restore... done.
Jan  5 09:16:21 t40 kernel: Enabling unmasked SIMD FPU exception support... done.
Jan  5 09:16:21 t40 kernel: Checking 'hlt' instruction... OK.
Jan  5 09:16:21 t40 kernel: ACPI: setting ELCR to 0200 (from 0820)
Jan  5 09:16:21 t40 kernel: softlockup thread 0 started up.
Jan  5 09:16:21 t40 kernel: NET: Registered protocol family 16
Jan  5 09:16:21 t40 kernel: ACPI: bus type pci registered
Jan  5 09:16:21 t40 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
Jan  5 09:16:21 t40 kernel: PCI: Using configuration type 1
Jan  5 09:16:21 t40 kernel: ACPI: Subsystem revision 20050408
Jan  5 09:16:21 t40 kernel: ACPI: Found ECDT
Jan  5 09:16:21 t40 kernel: ACPI: Interpreter enabled
Jan  5 09:16:21 t40 kernel: ACPI: Using PIC for interrupt routing
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 09:16:21 t40 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 09:16:21 t40 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan  5 09:16:21 t40 kernel: PCI: Probing PCI hardware (bus 00)
Jan  5 09:16:21 t40 kernel: ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Jan  5 09:16:21 t40 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jan  5 09:16:21 t40 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan  5 09:16:21 t40 kernel: ACPI: Embedded Controller [EC] (gpe 28)
Jan  5 09:16:21 t40 kernel: ACPI: Power Resource [PUBS] (on)
Jan  5 16:21:04 t40 irattach: got SIGTERM or SIGINT 
Jan  5 16:21:04 t40 irattach: Stopping device irda0
Jan  5 16:21:05 t40 irattach: exiting ... 
Jan  5 16:21:36 t40 kernel: Kernel logging (proc) stopped.
Jan  5 16:21:36 t40 kernel: Kernel log daemon terminating.
Jan  5 16:21:36 t40 exiting on signal 15
Jan  5 09:16:22 t40 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan  5 09:16:22 t40 kernel: pnp: PnP ACPI init
Jan  5 09:16:22 t40 kernel: pnp: PnP ACPI: found 12 devices
Jan  5 09:16:22 t40 kernel: SCSI subsystem initialized
Jan  5 09:16:22 t40 kernel: usbcore: registered new driver usbfs
Jan  5 09:16:22 t40 kernel: usbcore: registered new driver hub
Jan  5 09:16:22 t40 kernel: PCI: Using ACPI for IRQ routing
Jan  5 09:16:22 t40 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan  5 09:16:22 t40 kernel: NET: Registered protocol family 23
Jan  5 09:16:22 t40 kernel: Bluetooth: Core ver 2.7
Jan  5 09:16:22 t40 kernel: NET: Registered protocol family 31
Jan  5 09:16:22 t40 kernel: Bluetooth: HCI device and connection manager initialized
Jan  5 09:16:22 t40 kernel: Bluetooth: HCI socket layer initialized
Jan  5 09:16:22 t40 kernel: Simple Boot Flag at 0x35 set to 0x1
Jan  5 09:16:22 t40 kernel: Machine check exception polling timer started.
Jan  5 09:16:22 t40 kernel: highmem bounce pool size: 64 pages
Jan  5 09:16:22 t40 kernel: inotify device minor=63
Jan  5 09:16:22 t40 kernel: Initializing Cryptographic API
Jan  5 09:16:22 t40 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan  5 09:16:22 t40 kernel: PCI: setting IRQ 11 as level-triggered
Jan  5 09:16:22 t40 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 09:16:22 t40 kernel: radeonfb: Retreived PLL infos from BIOS
Jan  5 09:16:22 t40 kernel: radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
Jan  5 09:16:22 t40 kernel: radeonfb: PLL min 20000 max 35000
Jan  5 09:16:22 t40 kernel: Non-DDC laptop panel detected
Jan  5 09:16:22 t40 kernel: radeonfb: Monitor 1 type LCD found
Jan  5 09:16:22 t40 kernel: radeonfb: Monitor 2 type no found
Jan  5 09:16:22 t40 kernel: radeonfb: panel ID string: SXGA+ Single (85MHz)    
Jan  5 09:16:22 t40 kernel: radeonfb: detected LVDS panel size from BIOS: 1400x1050
Jan  5 09:16:22 t40 kernel: radeondb: BIOS provided dividers will be used
Jan  5 09:16:22 t40 kernel: radeonfb: Dynamic Clock Power Management enabled
Jan  5 09:16:22 t40 kernel: Console: switching to colour frame buffer device 175x65
Jan  5 09:16:22 t40 kernel: radeonfb (0000:01:00.0): ATI Radeon Lf 
Jan  5 09:16:22 t40 kernel: ACPI: AC Adapter [AC] (on-line)
Jan  5 09:16:22 t40 kernel: ACPI: Battery Slot [BAT0] (battery present)
Jan  5 09:16:22 t40 kernel: ACPI: Power Button (FF) [PWRF]
Jan  5 16:22:34 t40 syslogd 1.4.1#18: restart.
Jan  5 16:22:34 t40 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Jan  5 16:22:36 t40 kernel: Cannot open map file: /boot/System.map-2.6.15-mm1.
Jan  5 16:22:36 t40 kernel: No module symbols loaded - kernel modules not enabled. 
Jan  5 16:22:36 t40 kernel: Linux version 2.6.15-mm1 (root@t40) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #1 PREEMPT Thu Jan 5 15:49:14 CET 2006
Jan  5 16:22:36 t40 kernel: BIOS-provided physical RAM map:
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 0000000000100000 - 000000003ff50000 (usable)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 000000003ff50000 - 000000003ff67000 (ACPI data)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 000000003ff67000 - 000000003ff79000 (ACPI NVS)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
Jan  5 16:22:36 t40 kernel:  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Jan  5 16:22:36 t40 kernel: 127MB HIGHMEM available.
Jan  5 16:22:36 t40 kernel: 896MB LOWMEM available.
Jan  5 16:22:36 t40 kernel: DMI present.
Jan  5 16:22:37 t40 kernel: ACPI: PM-Timer IO Port: 0x1008
Jan  5 16:22:37 t40 kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
Jan  5 16:22:37 t40 kernel: Detected 1594.926 MHz processor.
Jan  5 16:22:37 t40 kernel: Built 1 zonelists
Jan  5 16:22:37 t40 kernel: Enabling fast FPU save and restore... done.
Jan  5 16:22:38 t40 kernel: Enabling unmasked SIMD FPU exception support... done.
Jan  5 16:22:38 t40 kernel: Initializing CPU#0
Jan  5 16:22:38 t40 kernel: Kernel command line: BOOT_IMAGE=Linux-acpi ro root=306 quiet
Jan  5 16:22:38 t40 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Jan  5 16:22:38 t40 kernel: Console: colour VGA+ 80x25
Jan  5 16:22:38 t40 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan  5 16:22:38 t40 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  5 16:22:38 t40 kernel: Memory: 1033444k/1047872k available (3244k kernel code, 13852k reserved, 1024k data, 180k init, 130368k highmem)
Jan  5 16:22:38 t40 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan  5 16:22:38 t40 kernel: Calibrating delay using timer specific routine.. 3191.68 BogoMIPS (lpj=6383360)
Jan  5 16:22:38 t40 kernel: Mount-cache hash table entries: 512
Jan  5 16:22:38 t40 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jan  5 16:22:38 t40 kernel: CPU: L2 cache: 1024K
Jan  5 16:22:38 t40 kernel: Intel machine check architecture supported.
Jan  5 16:22:38 t40 kernel: Intel machine check reporting enabled on CPU#0.
Jan  5 16:22:38 t40 kernel: mtrr: v2.0 (20020519)
Jan  5 16:22:38 t40 kernel: CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
Jan  5 16:22:38 t40 kernel: Checking 'hlt' instruction... OK.
Jan  5 16:22:38 t40 kernel: ACPI: setting ELCR to 0200 (from 0820)
Jan  5 16:22:38 t40 kernel: NET: Registered protocol family 16
Jan  5 16:22:38 t40 kernel: ACPI: bus type pci registered
Jan  5 16:22:38 t40 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
Jan  5 16:22:38 t40 kernel: PCI: Using configuration type 1
Jan  5 16:22:38 t40 kernel: ACPI: Subsystem revision 20051216
Jan  5 16:22:38 t40 kernel: ACPI: Found ECDT
Jan  5 16:22:38 t40 kernel: ACPI: Interpreter enabled
Jan  5 16:22:38 t40 kernel: ACPI: Using PIC for interrupt routing
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
Jan  5 16:22:38 t40 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Jan  5 16:22:38 t40 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan  5 16:22:38 t40 kernel: PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
Jan  5 16:22:38 t40 kernel: PCI quirk: region 1180-11bf claimed by ICH4 GPIO
Jan  5 16:22:38 t40 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jan  5 16:22:38 t40 kernel: PCI: Transparent bridge - 0000:00:1e.0
Jan  5 16:22:38 t40 kernel: ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
Jan  5 16:22:38 t40 kernel: ACPI: Power Resource [PUBS] (on)
Jan  5 16:22:38 t40 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan  5 16:22:38 t40 kernel: pnp: PnP ACPI init
Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
Jan  5 16:22:38 t40 irattach: executing: 'echo t40 > /proc/sys/net/irda/devname'
Jan  5 16:22:38 t40 irattach: Starting device irda0
Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
Jan  5 16:22:39 t40 last message repeated 10 times
Jan  5 16:22:39 t40 kernel: pnp: PnP ACPI: found 0 devices
Jan  5 16:22:39 t40 kernel: SCSI subsystem initialized
Jan  5 16:22:39 t40 kernel: usbcore: registered new driver usbfs
Jan  5 16:22:39 t40 kernel: usbcore: registered new driver hub
Jan  5 16:22:39 t40 kernel: PCI: Using ACPI for IRQ routing
Jan  5 16:22:39 t40 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan  5 16:22:39 t40 kernel: NET: Registered protocol family 23
Jan  5 16:22:39 t40 kernel: Bluetooth: Core ver 2.8
Jan  5 16:22:39 t40 kernel: NET: Registered protocol family 31
Jan  5 16:22:39 t40 kernel: Bluetooth: HCI device and connection manager initialized
Jan  5 16:22:39 t40 kernel: Bluetooth: HCI socket layer initialized
Jan  5 16:22:39 t40 kernel: PCI: Bridge: 0000:00:01.0
Jan  5 16:22:39 t40 kernel:   IO window: 3000-3fff
Jan  5 16:22:39 t40 kernel:   MEM window: c0100000-c01fffff
Jan  5 16:22:39 t40 kernel:   PREFETCH window: e0000000-e7ffffff
Jan  5 16:22:39 t40 kernel: PCI: Bus 3, cardbus bridge: 0000:02:00.0
Jan  5 16:22:39 t40 kernel:   IO window: 00004000-000040ff
Jan  5 16:22:39 t40 kernel:   IO window: 00004400-000044ff
Jan  5 16:22:39 t40 kernel:   PREFETCH window: e8000000-e9ffffff
Jan  5 16:22:39 t40 kernel:   MEM window: c2000000-c3ffffff
Jan  5 16:22:39 t40 kernel: PCI: Bus 7, cardbus bridge: 0000:02:00.1
Jan  5 16:22:39 t40 kernel:   IO window: 00004800-000048ff
Jan  5 16:22:39 t40 kernel:   IO window: 00004c00-00004cff
Jan  5 16:22:39 t40 kernel:   PREFETCH window: ea000000-ebffffff
Jan  5 16:22:39 t40 kernel:   MEM window: c4000000-c5ffffff
Jan  5 16:22:39 t40 kernel: PCI: Bridge: 0000:00:1e.0
Jan  5 16:22:39 t40 kernel:   IO window: 4000-8fff
Jan  5 16:22:39 t40 kernel:   MEM window: c0200000-cfffffff
Jan  5 16:22:39 t40 kernel:   PREFETCH window: e8000000-efffffff
Jan  5 16:22:39 t40 kernel: **** SET: Misaligned resource pointer: c19d3502 Type 07 Len 0
Jan  5 16:22:39 t40 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan  5 16:22:39 t40 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:39 t40 kernel: **** SET: Misaligned resource pointer: c19d3502 Type 07 Len 0
Jan  5 16:22:39 t40 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Jan  5 16:22:39 t40 kernel: ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  5 16:22:39 t40 kernel: Simple Boot Flag at 0x35 set to 0x1
Jan  5 16:22:39 t40 kernel: Machine check exception polling timer started.
Jan  5 16:22:39 t40 kernel: highmem bounce pool size: 64 pages
Jan  5 16:22:39 t40 kernel: Loading Reiser4. See www.namesys.com for a description of Reiser4.
Jan  5 16:22:40 t40 kernel: Initializing Cryptographic API
Jan  5 16:22:40 t40 kernel: io scheduler noop registered
Jan  5 16:22:40 t40 kernel: io scheduler anticipatory registered
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:40 t40 kernel: radeonfb: Retrieved PLL infos from BIOS
Jan  5 16:22:40 t40 kernel: radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
Jan  5 16:22:40 t40 kernel: radeonfb: PLL min 20000 max 35000
Jan  5 16:22:40 t40 kernel: Non-DDC laptop panel detected
Jan  5 16:22:40 t40 kernel: radeonfb: Monitor 1 type LCD found
Jan  5 16:22:40 t40 kernel: radeonfb: Monitor 2 type no found
Jan  5 16:22:40 t40 kernel: radeonfb: panel ID string: SXGA+ Single (85MHz)    
Jan  5 16:22:40 t40 kernel: radeonfb: detected LVDS panel size from BIOS: 1400x1050
Jan  5 16:22:40 t40 kernel: radeondb: BIOS provided dividers will be used
Jan  5 16:22:40 t40 kernel: Time: tsc clocksource has been installed.
Jan  5 16:22:40 t40 kernel: radeonfb: Dynamic Clock Power Management enabled
Jan  5 16:22:40 t40 kernel: Console: switching to colour frame buffer device 175x65
Jan  5 16:22:40 t40 kernel: radeonfb (0000:01:00.0): ATI Radeon Lf 
Jan  5 16:22:40 t40 kernel: ACPI: AC Adapter [AC] (on-line)
Jan  5 16:22:40 t40 kernel: ACPI: Battery Slot [BAT0] (battery present)
Jan  5 16:22:40 t40 kernel: ACPI: Power Button (FF) [PWRF]
Jan  5 16:22:40 t40 kernel: ACPI: Lid Switch [LID]
Jan  5 16:22:40 t40 kernel: ACPI: Sleep Button (CM) [SLPB]
Jan  5 16:22:40 t40 kernel: ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Jan  5 16:22:40 t40 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Jan  5 16:22:40 t40 kernel: ACPI: Processor [CPU] (supports 8 throttling states)
Jan  5 16:22:40 t40 kernel: ACPI: Thermal Zone [THM0] (56 C)
Jan  5 16:22:40 t40 kernel: ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
Jan  5 16:22:40 t40 kernel: ibm_acpi: http://ibm-acpi.sf.net/
Jan  5 16:22:40 t40 kernel: lp: driver loaded but no devices found
Jan  5 16:22:40 t40 kernel: Real Time Clock Driver v1.12
Jan  5 16:22:40 t40 kernel: Non-volatile memory driver v1.2
Jan  5 16:22:40 t40 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jan  5 16:22:40 t40 kernel: agpgart: Detected an Intel 855PM Chipset.
Jan  5 16:22:40 t40 kernel: agpgart: AGP aperture is 256M @ 0xd0000000
Jan  5 16:22:40 t40 kernel: [drm] Initialized drm 1.0.1 20051102
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:40 t40 kernel: [drm] Initialized radeon 1.21.0 20051229 on minor 0
Jan  5 16:22:40 t40 kernel: PNP: No PS/2 controller found. Probing ports directly.
Jan  5 16:22:40 t40 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan  5 16:22:40 t40 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan  5 16:22:40 t40 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
Jan  5 16:22:40 t40 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  5 16:22:40 t40 kernel: ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Jan  5 16:22:40 t40 kernel: parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
Jan  5 16:22:40 t40 kernel: parport0: irq 7 detected
Jan  5 16:22:40 t40 kernel: Time: pit clocksource has been installed.
Jan  5 16:22:40 t40 kernel: lp0: using parport0 (polling).
Jan  5 16:22:40 t40 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jan  5 16:22:40 t40 kernel: loop: loaded (max 8 devices)
Jan  5 16:22:40 t40 kernel: pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Jan  5 16:22:40 t40 kernel: Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Jan  5 16:22:40 t40 kernel: Copyright (c) 1999-2005 Intel Corporation.
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:40 t40 kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan  5 16:22:40 t40 kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  5 16:22:40 t40 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  5 16:22:40 t40 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan  5 16:22:40 t40 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan  5 16:22:40 t40 kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1
Jan  5 16:22:40 t40 kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jan  5 16:22:40 t40 kernel: **** SET: Misaligned resource pointer: c1a1bc02 Type 07 Len 0
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Jan  5 16:22:40 t40 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:40 t40 kernel: ICH4: chipset revision 1
Jan  5 16:22:40 t40 kernel: ICH4: not 100%% native mode: will probe irqs later
Jan  5 16:22:40 t40 kernel:     ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
Jan  5 16:22:40 t40 kernel:     ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Jan  5 16:22:40 t40 kernel: hda: IC25N040ATCS05-0, ATA DISK drive
Jan  5 16:22:40 t40 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan  5 16:22:40 t40 kernel: hdc: UJDA745 DVD/CDRW, ATAPI CD/DVD-ROM drive
Jan  5 16:22:40 t40 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan  5 16:22:40 t40 kernel: hda: max request size: 128KiB
Jan  5 16:22:41 t40 kernel: hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100)
Jan  5 16:22:41 t40 kernel: hda: cache flushes not supported
Jan  5 16:22:41 t40 kernel:  hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
Jan  5 16:22:41 t40 kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jan  5 16:22:41 t40 kernel: Uniform CD-ROM driver Revision: 3.20
Jan  5 16:22:41 t40 kernel: QLogic Fibre Channel HBA Driver
Jan  5 16:22:41 t40 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:41 t40 kernel: Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
Jan  5 16:22:41 t40 kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
Jan  5 16:22:41 t40 kernel: Yenta: Routing CardBus interrupts to PCI
Jan  5 16:22:41 t40 kernel: Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
Jan  5 16:22:41 t40 kernel: Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Jan  5 16:22:41 t40 kernel: Socket status: 30000006
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Jan  5 16:22:41 t40 kernel: ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  5 16:22:41 t40 kernel: Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
Jan  5 16:22:41 t40 kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
Jan  5 16:22:41 t40 kernel: Yenta: Routing CardBus interrupts to PCI
Jan  5 16:22:41 t40 kernel: Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
Jan  5 16:22:41 t40 kernel: Yenta: ISA IRQ mask 0x04d8, PCI irq 5
Jan  5 16:22:41 t40 kernel: Socket status: 30000006
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
Jan  5 16:22:41 t40 kernel: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Jan  5 16:22:41 t40 kernel: usbmon: debugfs is not available
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver usblp
Jan  5 16:22:41 t40 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jan  5 16:22:41 t40 kernel: Initializing USB Mass Storage driver...
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver usb-storage
Jan  5 16:22:41 t40 kernel: USB Mass Storage support registered.
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver hiddev
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver usbhid
Jan  5 16:22:41 t40 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver usbserial
Jan  5 16:22:41 t40 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan  5 16:22:41 t40 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
Jan  5 16:22:41 t40 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
Jan  5 16:22:41 t40 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver visor
Jan  5 16:22:41 t40 kernel: drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
Jan  5 16:22:41 t40 kernel: mice: PS/2 mouse device common for all mice
Jan  5 16:22:41 t40 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jan  5 16:22:41 t40 kernel: input: PC Speaker as /class/input/input1
Jan  5 16:22:41 t40 kernel: device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
Jan  5 16:22:41 t40 kernel: Bluetooth: HCI USB driver ver 2.9
Jan  5 16:22:41 t40 kernel: usbcore: registered new driver hci_usb
Jan  5 16:22:41 t40 kernel: MC: drivers/edac/edac_mc.c version edac_mc  Ver: 2.0.0 Jan  5 2006
Jan  5 16:22:41 t40 kernel: Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
Jan  5 16:22:41 t40 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  5 16:22:42 t40 kernel: Time: acpi_pm clocksource has been installed.
Jan  5 16:22:42 t40 kernel: Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
Jan  5 16:22:42 t40 kernel: serio: Synaptics pass-through port at isa0060/serio1/input0
Jan  5 16:22:42 t40 kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input2
Jan  5 16:22:42 t40 kernel: intel8x0_measure_ac97_clock: measured 55368 usecs
Jan  5 16:22:42 t40 kernel: intel8x0: clocking to 48000
Jan  5 16:22:42 t40 kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Jan  5 16:22:42 t40 kernel: ALSA device list:
Jan  5 16:22:42 t40 kernel:   #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 5
Jan  5 16:22:42 t40 kernel:   #1: Intel 82801DB-ICH4 Modem at 0x2400, irq 5
Jan  5 16:22:42 t40 kernel: NET: Registered protocol family 2
Jan  5 16:22:42 t40 kernel: IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  5 16:22:42 t40 kernel: TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
Jan  5 16:22:42 t40 kernel: TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
Jan  5 16:22:42 t40 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jan  5 16:22:42 t40 kernel: TCP reno registered
Jan  5 16:22:42 t40 kernel: TCP bic registered
Jan  5 16:22:42 t40 kernel: Initializing IPsec netlink socket
Jan  5 16:22:42 t40 kernel: NET: Registered protocol family 1
Jan  5 16:22:42 t40 kernel: NET: Registered protocol family 17
Jan  5 16:22:42 t40 kernel: NET: Registered protocol family 15
Jan  5 16:22:42 t40 kernel: IrCOMM protocol (Dag Brattli)
Jan  5 16:22:42 t40 kernel: Bluetooth: L2CAP ver 2.8
Jan  5 16:22:42 t40 kernel: Bluetooth: L2CAP socket layer initialized
Jan  5 16:22:42 t40 kernel: Bluetooth: SCO (Voice Link) ver 0.5
Jan  5 16:22:42 t40 kernel: Bluetooth: SCO socket layer initialized
Jan  5 16:22:42 t40 kernel: Bluetooth: RFCOMM socket layer initialized
Jan  5 16:22:42 t40 kernel: Bluetooth: RFCOMM TTY layer initialized
Jan  5 16:22:42 t40 kernel: Bluetooth: RFCOMM ver 1.6
Jan  5 16:22:42 t40 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Jan  5 16:22:42 t40 kernel: Bluetooth: BNEP filters: protocol multicast
Jan  5 16:22:42 t40 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Jan  5 16:22:42 t40 kernel: Using IPI Shortcut mode
Jan  5 16:22:42 t40 kernel: ACPI wakeup devices: 
Jan  5 16:22:42 t40 kernel:  LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M 
Jan  5 16:22:42 t40 kernel: ACPI: (supports S0 S3 S4 S5)
Jan  5 16:22:42 t40 kernel: VFS: Mounted root (reiser4 filesystem) readonly.
Jan  5 16:22:42 t40 kernel: Freeing unused kernel memory: 180k freed
Jan  5 16:22:42 t40 kernel: Adding 498920k swap on /dev/hda5.  Priority:-1 extents:1 across:498920k
Jan  5 16:22:42 t40 kernel: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Jan  5 16:22:42 t40 kernel: input: TPPS/2 IBM TrackPoint as /class/input/input3
Jan  5 16:22:42 t40 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  5 16:22:42 t40 kernel: kjournald starting.  Commit interval 5 seconds
Jan  5 16:22:42 t40 kernel: kjournald starting.  Commit interval 600 seconds
Jan  5 16:22:42 t40 kernel: EXT3 FS on hda7, internal journal
Jan  5 16:22:42 t40 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  5 16:22:42 t40 kernel: USB Universal Host Controller Interface driver v3.0
Jan  5 16:22:42 t40 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
Jan  5 16:22:42 t40 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  5 16:22:42 t40 kernel: hub 1-0:1.0: USB hub found
Jan  5 16:22:42 t40 kernel: hub 1-0:1.0: 2 ports detected
Jan  5 16:22:42 t40 kernel: **** SET: Misaligned resource pointer: c1b1a2c2 Type 07 Len 0
Jan  5 16:22:42 t40 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jan  5 16:22:42 t40 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jan  5 16:22:42 t40 kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
Jan  5 16:22:42 t40 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan  5 16:22:42 t40 kernel: hub 2-0:1.0: USB hub found
Jan  5 16:22:42 t40 kernel: hub 2-0:1.0: 2 ports detected
Jan  5 16:22:43 t40 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:43 t40 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan  5 16:22:43 t40 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jan  5 16:22:43 t40 kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
Jan  5 16:22:43 t40 kernel: usb usb3: configuration #1 chosen from 1 choice
Jan  5 16:22:43 t40 kernel: hub 3-0:1.0: USB hub found
Jan  5 16:22:43 t40 kernel: hub 3-0:1.0: 2 ports detected
Jan  5 16:22:43 t40 kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jan  5 16:22:43 t40 kernel: usb 3-1: configuration #1 chosen from 1 choice
Jan  5 16:22:43 t40 kernel: **** SET: Misaligned resource pointer: f7db5502 Type 07 Len 0
Jan  5 16:22:43 t40 kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Jan  5 16:22:43 t40 kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Jan  5 16:22:43 t40 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan  5 16:22:43 t40 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jan  5 16:22:43 t40 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Jan  5 16:22:43 t40 kernel: ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
Jan  5 16:22:43 t40 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  5 16:22:43 t40 kernel: usb usb4: configuration #1 chosen from 1 choice
Jan  5 16:22:43 t40 kernel: hub 4-0:1.0: USB hub found
Jan  5 16:22:43 t40 kernel: hub 4-0:1.0: 6 ports detected
Jan  5 16:22:43 t40 kernel: usb 3-1: USB disconnect, address 2
Jan  5 16:22:43 t40 kernel: usb 3-1: new full speed USB device using uhci_hcd and address 3
Jan  5 16:22:43 t40 kernel: usb 3-1: configuration #1 chosen from 1 choice
Jan  5 16:22:43 t40 kernel: pcmcia: Detected deprecated PCMCIA ioctl usage.
Jan  5 16:22:43 t40 kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Jan  5 16:22:43 t40 kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Jan  5 16:22:43 t40 kernel: io scheduler cfq registered
Jan  5 16:22:43 t40 kernel: <4>reiser4[syslogd(2729)]: disable_write_barrier (fs/reiser4/wander.c:233)[zam-1055]:
Jan  5 16:22:43 t40 kernel: WARNING: disabling write barrier
Jan  5 16:22:43 t40 kernel: 
Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
Jan  5 16:22:48 t40 last message repeated 2 times
Jan  5 16:22:48 t40 kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jan  5 16:22:48 t40 kernel: c028b7cf
Jan  5 16:22:48 t40 kernel: Modules linked in: irtty_sir sir_dev cfq_iosched ehci_hcd uhci_hcd
Jan  5 16:22:48 t40 kernel: EIP:    0060:[<c028b7cf>]    Not tainted VLI
Jan  5 16:22:48 t40 kernel: EFLAGS: 00013202   (2.6.15-mm1) 
Jan  5 16:22:48 t40 kernel:        <0>c028b9e9 f762ff08 00000002 00000000 c19720ec 00000000 1f000217 c1a79400 
Jan  5 16:22:48 t40 kernel:        <0>00000032 00000001 c028bfb5 c0297262 c1a79400 c02972af 1f000207 c029727f 
Jan  5 16:22:48 t40 kernel:  <3>[drm:drm_release] *ERROR* Device busy: 1 0
Jan  5 16:22:58 t40 kernel: SysRq : Emergency Sync
Jan  5 16:22:58 t40 kernel: <4>reiser4[pdflush(172)]: disable_write_barrier (fs/reiser4/wander.c:233)[zam-1055]:
Jan  5 16:22:58 t40 kernel: WARNING: disabling write barrier
Jan  5 16:22:59 t40 kernel: 

[-- Attachment #1.3: .config --]
[-- Type: text/plain, Size: 38580 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-mm1
# Thu Jan  5 15:33:23 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda5"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRNET is not set
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
# CONFIG_ACX is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
CONFIG_TCG_TPM=m
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI_ARCH_HAS_MASTER=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_IP is not set

#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_GOTEMP is not set
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BULKTRANSFER is not set
# CONFIG_MMC_WBSD is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# EDAC - error detection and reporting (RAS)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 17:01 Re. 2.6.15-mm1 Alexander Gran
@ 2006-01-05 22:47 ` Andrew Morton
  2006-01-05 23:33   ` Alexander Gran
                     ` (2 more replies)
  0 siblings, 3 replies; 14+ messages in thread
From: Andrew Morton @ 2006-01-05 22:47 UTC (permalink / raw)
  To: Alexander Gran
  Cc: linux-kernel, linux-acpi, Brown, Len, Adam Belay, reiserfs-dev,
	Dave Airlie, Vladimir V. Saveliev

Alexander Gran <alex@zodiac.dnsalias.org> wrote:
>
> Hi,
> 
> just tried 2.6.15-mm1 on my thinkpad. Various aspects that didn't work / look 
> good:

Thanks.  A few people have some work to do before they are ready to merge to 2.6.16.

> Jan  5 16:22:38 t40 kernel: pnp: PnP ACPI init
> Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
> Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
> Jan  5 16:22:39 t40 last message repeated 10 times
> Jan  5 16:22:39 t40 kernel: pnp: PnP ACPI: found 0 devices

pnpacpi is unhappy.

> All over the place logs like this:
> Jan  5 16:22:43 t40 kernel: **** SET: Misaligned resource pointer: f7db5502 
> Type 07 Len 0
> Unknown to me so far..

acpi is unhappy.

> When X startet, the laptops crashed:
> Jan  5 16:22:43 t40 kernel: <4>reiser4[syslogd(2729)]: disable_write_barrier 
> (fs/reiser4/wander.c:233)[zam-1055]:
> Jan  5 16:22:43 t40 kernel: WARNING: disabling write barrier

Vladimir, is that expected?

> Jan  5 16:22:43 t40 kernel:
> Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 
> 0xe0000000,0x4000000
> Jan  5 16:22:48 t40 last message repeated 2 times

Is that new?

> Jan  5 16:22:48 t40 kernel: agpgart: Found an AGP 2.0 compliant device at 
> 0000:00:00.0.
> Jan  5 16:22:48 t40 kernel: c028b7cf
> Jan  5 16:22:48 t40 kernel: Modules linked in: irtty_sir sir_dev cfq_iosched 
> ehci_hcd uhci_hcd
> Jan  5 16:22:48 t40 kernel: EIP:    0060:[<c028b7cf>]    Not tainted VLI
> Jan  5 16:22:48 t40 kernel: EFLAGS: 00013202   (2.6.15-mm1)
> Jan  5 16:22:48 t40 kernel:        <0>c028b9e9 f762ff08 00000002 00000000 
> c19720ec 00000000 1f000217 c1a79400
> Jan  5 16:22:48 t40 kernel:        <0>00000032 00000001 c028bfb5 c0297262 
> c1a79400 c02972af 1f000207 c029727f

hm, it's not clear what oopsed.   Can you get a cleaner copy of this?

> Jan  5 16:22:48 t40 kernel:  <3>[drm:drm_release] *ERROR* Device busy: 1 0

drm is unhappy


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
@ 2006-01-05 23:31 Etienne Lorrain
  2006-01-06  0:15 ` Andrew Morton
  0 siblings, 1 reply; 14+ messages in thread
From: Etienne Lorrain @ 2006-01-05 23:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: Andrew Morton

  I have my own OOPs with 2.6.15-mm1, this kind:

Jan  5 22:40:04 localhost fstab-sync[1919]: added mount point /media/floppy
for /dev/fd0
Jan  5 22:41:37 localhost kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000010
Jan  5 22:41:37 localhost kernel:  printing eip:
Jan  5 22:41:37 localhost kernel: c013da3a
Jan  5 22:41:37 localhost kernel: *pde = 1d165067
Jan  5 22:41:37 localhost kernel: *pte = 00000000
Jan  5 22:41:37 localhost kernel: Oops: 0000 [#1]
Jan  5 22:41:37 localhost kernel: last sysfs file: /class/vc/vcs7/dev
Jan  5 22:41:37 localhost kernel: Modules linked in: autofs4 pcmcia
ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables vfat fat
yenta_socket rsrc_nonstatic pcmcia_core uhci_hcd ehci_hcd i2c_viapro
i2c_core snd_via82xx snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ext3
jbd
Jan  5 22:41:37 localhost kernel: CPU:    0
Jan  5 22:41:37 localhost kernel: EIP:    0060:[<c013da3a>]    Not tainted
VLI
Jan  5 22:41:37 localhost kernel: EFLAGS: 00013256   (2.6.15-mm1)
Jan  5 22:41:37 localhost kernel: EIP is at __audit_inode+0xba/0x190
Jan  5 22:41:37 localhost kernel: eax: 00000008   ebx: 00000000   ecx:
dcbf02c0   edx: d9343268
Jan  5 22:41:37 localhost kernel: esi: d922ef44   edi: d9fd3000   ebp:
dcbf02c0   esp: d922ee88
Jan  5 22:41:37 localhost kernel: ds: 007b   es: 007b   ss: 0068
Jan  5 22:41:37 localhost kernel: Process X (pid: 2192, threadinfo=d922e000
task=d8abcff0)
Jan  5 22:41:37 localhost kernel: Stack: <0>00000003 00000000 dcbf02c0
fffffffe d922ef44 d9fd3000 00000003 c017002c
Jan  5 22:41:37 localhost kernel:        <0>d9fd3000 d9343268 00000101
00000101 00000101 d922ef44 ffffffe9 00000003
Jan  5 22:41:37 localhost kernel:        <0>c0170096 d922e000 00000002
d922ef44 00000006 c017011f d9fd3000 00000001
Jan  5 22:41:38 localhost gdm[2183]: gdm_slave_xioerror_handler: Fatal X
error - Restarting :0
Jan  5 22:41:38 localhost kernel: Call Trace:
Jan  5 22:41:39 localhost kernel:  [<c017002c>] path_lookup+0x1ac/0x1d0
Jan  5 22:41:40 localhost kernel:  [<c0170096>]
__path_lookup_intent_open+0x46/0xa0
Jan  5 22:41:41 localhost kernel:  [<c017011f>] path_lookup_open+0x2f/0x40
Jan  5 22:41:41 localhost kernel:  [<c0170b33>] open_namei+0x73/0x530
Jan  5 22:41:42 localhost kernel:  [<c0144cdd>] __alloc_pages+0x5d/0x390
Jan  5 22:41:42 localhost kernel:  [<c015e8b8>] filp_open+0x38/0x60
Jan  5 22:41:42 localhost kernel:  [<c015eaf0>] get_unused_fd+0xb0/0xe0
Jan  5 22:41:42 localhost kernel:  [<c015ec45>] do_sys_open+0x55/0x100
Jan  5 22:41:42 localhost kernel:  [<c01031a5>] syscall_call+0x7/0xb
Jan  5 22:41:43 localhost kernel: Code: 42 38 89 d8 c1 e0 05 8d 04 98 c7 44
10 3c 00 00 00 00 89 d8 8b 54 24 24 8b 4c 24 08 c1 e0 05 8d 04 98 8d 2c 08
8b 82 c4 00 00 00 <8b> 40 08 89 45 48 0f b7 42 28 66 89 45 4c 8b 42 30 89 45
50 8b
Jan  5 22:44:05 localhost shutdown: shutting down for system reboot
Jan  5 22:44:05 localhost init: Switching to runlevel: 6
Jan  5 22:44:17 localhost shutdown: shutting down for system reboot
Jan  5 22:44:26 localhost dbus: avc:  2 AV entries and 2/512 buckets used,
longest chain length 1
Jan  5 22:44:32 localhost xfs[1848]: terminating
Jan  5 22:44:34 localhost shutdown: shutting down for system reboot
Jan  5 22:44:41 localhost last message repeated 7 times
Jan  5 22:44:58 localhost kernel:  <6>[drm] Initialized drm 1.0.1 20051102
Jan  5 22:44:59 localhost kernel: [drm] Initialized radeon 1.21.0 20051229
on minor 0
Jan  5 22:45:01 localhost kernel: mtrr: 0xd0000000,0x8000000 overlaps
existing 0xd0000000,0x4000000
Jan  5 22:45:01 localhost kernel: agpgart: Found an AGP 3.5 compliant device
at 0000:00:00.0.
Jan  5 22:45:01 localhost kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000020
Jan  5 22:45:01 localhost kernel:  printing eip:
Jan  5 22:45:01 localhost kernel: c0250b08
Jan  5 22:45:01 localhost kernel: *pde = 1d4d1067
Jan  5 22:45:01 localhost kernel: *pte = 00000000
Jan  5 22:45:01 localhost kernel: Oops: 0000 [#2]
Jan  5 22:45:01 localhost kernel: last sysfs file: /class/drm/card0/dev
Jan  5 22:45:01 localhost kernel: Modules linked in: radeon drm autofs4
pcmcia ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables vfat fat
yenta_socket rsrc_nonstatic pcmcia_core uhci_hcd ehci_hcd i2c_viapro
i2c_core snd_via82xx snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss
snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ext3
jbd
Jan  5 22:45:01 localhost kernel: CPU:    0
Jan  5 22:45:01 localhost kernel: EIP:    0060:[<c0250b08>]    Not tainted
VLI
Jan  5 22:45:01 localhost kernel: EFLAGS: 00013282   (2.6.15-mm1)
Jan  5 22:45:01 localhost kernel: EIP is at
agp_collect_device_status+0x18/0x130
Jan  5 22:45:01 localhost kernel: eax: 00000058   ebx: df8cd008   ecx:
00003092   edx: 00000058
Jan  5 22:45:01 localhost kernel: esi: 00000032   edi: 00000001   ebp:
ddfb3900   esp: d978ceb4
Jan  5 22:45:01 localhost kernel: ds: 007b   es: 007b   ss: 0068
Jan  5 22:45:01 localhost kernel: Process X (pid: 2266, threadinfo=d978c000
task=db21a960)
Jan  5 22:45:01 localhost kernel: Stack: <0>00000000 00000084 00000004
d978cec4 1f000a07 df8cd008 00000032 00000001
Jan  5 22:45:01 localhost kernel:        <0>ddfb3900 c0250ddd df8cd008
1f000201 1f000a07 d978cef0 ddfb3900 1f000a07
Jan  5 22:45:01 localhost kernel:        <0>da0c6060 e14acd9f df8cd008
1f000201 da0c6060 e14ace09 da0c6060 1f000201
Jan  5 22:45:02 localhost kernel: Call Trace:
Jan  5 22:45:02 localhost kernel:  [<c0250ddd>]
agp_generic_enable+0x8d/0x160
Jan  5 22:45:02 localhost kernel:  [<e14acd9f>] drm_agp_enable+0x3f/0x60
[drm]
Jan  5 22:45:04 localhost kernel:  [<e14ace09>]
drm_agp_enable_ioctl+0x49/0x60 [drm]
Jan  5 22:45:05 localhost kernel:  [<e14acdc0>]
drm_agp_enable_ioctl+0x0/0x60 [drm]
Jan  5 22:45:05 localhost kernel:  [<e14a80ba>] drm_ioctl+0xaa/0x216 [drm]
Jan  5 22:45:05 localhost kernel:  [<c0173c41>] do_ioctl+0x81/0x90
Jan  5 22:45:06 localhost kernel:  [<c0173db0>] vfs_ioctl+0x60/0x1f0
Jan  5 22:45:06 localhost kernel:  [<c0173fc8>] sys_ioctl+0x88/0xa0
Jan  5 22:45:06 localhost kernel:  [<c01031a5>] syscall_call+0x7/0xb
Jan  5 22:45:06 localhost kernel: Code: c4 08 89 f2 5b 5e 0f b6 c2 c3 89 f6
8d bc 27 00 00 00 00 83 ec 24 89 5c 24 14 89 74 24 18 89 7c 24 1c 89 6c 24
20 e8 98 ff ff ff <8b> 15 20 00 00 00 8b 0d 10 00 00 00 8d 6c 24 10 0f b6 c0
83 c0
Jan  5 22:45:07 localhost kernel:  <3>[drm:drm_release] *ERROR* Device busy:
1 0
Jan  5 22:45:15 localhost shutdown: shutting down for system reboot

 But because my command line is:
Jan  5 22:39:29 localhost kernel: Kernel command line:
/boot/linux-2.6.15-mm1a.kgz video=vesa keyboard=uk NumLock=on
mouse=/dev/psaux COLS=160 LINES=64 LANG=en  rhgb ro root=/dev/hda3
ide0=0x1f0,0x3f6,14 ide1=0x170,0x376
 those may not count - even if it is unrelated.

 I have:
Jan  5 22:39:29 localhost kernel: Linux version 2.6.15-mm1
(etienne@localhost.localdomain) (gcc version 4.0.1 20050727 (Red Hat
4.0.1-5)) #1 Thu Jan 5 21:25:17 GMT 2006


 The only other strange thing is:
Jan  5 22:39:29 localhost kernel: PCI: Using IRQ router VIA [1106/3177] at
0000:00:11.0
Jan  5 22:39:29 localhost kernel:
Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:06.0 doesn't
match PIRQ mask - try pci=usepirqmask
Jan  5 22:39:29 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:10.1
Jan  5 22:39:29 localhost kernel:
Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:11.1 doesn't
match PIRQ mask - try pci=usepirqmask
 but it is not new with -mm1.

  Etienne.


	

	
		
___________________________________________________________________________ 
Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.
Téléchargez sur http://fr.messenger.yahoo.com

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 22:47 ` Andrew Morton
@ 2006-01-05 23:33   ` Alexander Gran
  2006-01-06  0:21     ` Andrew Morton
  2006-01-06  9:30   ` Hans Reiser
  2006-01-06 18:29   ` Alexander Zarochentsev
  2 siblings, 1 reply; 14+ messages in thread
From: Alexander Gran @ 2006-01-05 23:33 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-kernel, linux-acpi, Brown, Len, Adam Belay, reiserfs-dev,
	Dave Airlie, Vladimir V. Saveliev


[-- Attachment #1.1: Type: text/plain, Size: 4557 bytes --]

Am Donnerstag, 5. Januar 2006 23:47 schrieb Andrew Morton:
> > Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing
> > 0xe0000000,0x4000000
> > Jan  5 16:22:48 t40 last message repeated 2 times
>
> Is that new?

Umm, no. I just thought it could be related to the X oops.

> hm, it's not clear what oopsed.   Can you get a cleaner copy of this?

Hmm. I just rebooted to 2.6.15-mm1 runlevel one, fired up network and an sshd. 
So I could ssh back to the oops machine. Well. X is clearer but even more 
errors are in the logs now ;).
First the X oops:
EDAC PCI- Detected Parity Error on 0000:00:1e.0
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Unable to handle kernel NULL pointer dereference at virtual address 00000020
 printing eip:
c028b7cf
*pde = 372d4067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT
last sysfs file: /block/hda/queue/scheduler
Modules linked in: aes_i586 cfq_iosched ehci_hcd uhci_hcd
CPU:    0
EIP:    0060:[<c028b7cf>]    Not tainted VLI
EFLAGS: 00013202   (2.6.15-mm1)
EIP is at agp_collect_device_status+0x14/0xd4
eax: 00000058   ebx: f75c1f08   ecx: 00000000   edx: 00000058
esi: 1f000207   edi: c19a80c0   ebp: c19af428   esp: f75c1ed0
ds: 007b   es: 007b   ss: 0068
Process Xorg (pid: 3843, threadinfo=f75c0000 task=f7890550)
Stack: <0>00003246 1f000217 1f000207 1f000217 f75c1f08 1f000207 c19a80c0 
c19af428
       <0>c028b9e9 f75c1f08 00000002 00000000 c19720ec 00000000 1f000217 
c19af400
       <0>00000032 00000001 c028bfb5 c0297262 c19af400 c02972af 1f000207 
c029727f
Call Trace:
 [<c028b9e9>] agp_generic_enable+0x72/0x10f
 [<c028bfb5>] agp_enable+0xa/0xb
 [<c0297262>] drm_agp_enable+0x2c/0x49
 [<c02972af>] drm_agp_enable_ioctl+0x30/0x39
 [<c029727f>] drm_agp_enable_ioctl+0x0/0x39
 [<c029311d>] drm_ioctl+0x93/0x1e4
 [<c0163664>] do_ioctl+0x64/0x6d
 [<c01637a9>] vfs_ioctl+0x50/0x1be
 [<c01ae603>] write_unix_file+0x0/0x500
 [<c016394b>] sys_ioctl+0x34/0x51
 [<c0102d0f>] sysenter_past_esp+0x54/0x75
Code: 02 00 00 00 e8 94 66 f9 ff 89 c6 84 c0 74 de 89 f2 0f b6 c2 5b 5e c3 55 
57 56 53 83 ec 10 89 54 24 08 89 4c 24 04 e8 bc ff ff ff <8b> 15 20 00 00 00 
8b 1d 10 00 00 0
0 0f b6 c0 8d 48 04 8d 6c 24
 <3>[drm:drm_release] *ERROR* Device busy: 1 0
EDAC PCI- Detected Parity Error on 0000:00:1e.0

Additionally every second or so I got these console (and kernel of cource) 
message:
EDAC PCI- Detected Parity Error on 0000:00:1e.0
lspci:
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O 
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller 
(rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 
EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface 
Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller 
(rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf 
[FireGL 9000] (rev 02)
0000:02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
Controller (rev 01)
0000:02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
Controller (rev 01)
0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet 
Controller (Mobile) (rev 03)
0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5211 802.11ab 
NIC (rev 01)

Full log again attached

-- 
Encrypted Mails welcome.
PGP-Key at http://zodiac.dnsalias.org/misc/pgpkey.asc | Key-ID: 0x6D7DD291

[-- Attachment #1.2: mm1-2 --]
[-- Type: text/plain, Size: 40877 bytes --]

Linux version 2.6.15-mm1 (root@t40) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #1 PREEMPT Thu Jan 5 15:49:14 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff50000 (usable)
 BIOS-e820: 000000003ff50000 - 000000003ff67000 (ACPI data)
 BIOS-e820: 000000003ff67000 - 000000003ff79000 (ACPI NVS)
 BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261968
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32592 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v002 IBM                                   ) @ 0x000f6d70
ACPI: XSDT (v001 IBM    TP-1R    0x00003160  LTP 0x00000000) @ 0x3ff5a6cd
ACPI: FADT (v003 IBM    TP-1R    0x00003160 IBM  0x00000001) @ 0x3ff5a800
ACPI: SSDT (v001 IBM    TP-1R    0x00003160 MSFT 0x0100000e) @ 0x3ff5a9b4
ACPI: ECDT (v001 IBM    TP-1R    0x00003160 IBM  0x00000001) @ 0x3ff66ebc
ACPI: TCPA (v001 IBM    TP-1R    0x00003160 PTL  0x00000001) @ 0x3ff66f0e
ACPI: BOOT (v001 IBM    TP-1R    0x00003160  LTP 0x00000001) @ 0x3ff66fd8
ACPI: DSDT (v001 IBM    TP-1R    0x00003160 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
Detected 1594.846 MHz processor.
Built 1 zonelists
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Kernel command line: BOOT_IMAGE=Linux-acpi ro root=306 quiet 1
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033444k/1047872k available (3244k kernel code, 13852k reserved, 1024k data, 180k init, 130368k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3191.67 BogoMIPS (lpj=6383342)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0820)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
ACPI: Subsystem revision 20051216
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0a03
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for IBM0057
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__PRS failure for PNP0501
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
pnp: PnPACPI: unknown resource type 7
pnp: PnPACPI: METHOD_NAME__CRS failure for IBM0071
pnp: PnP ACPI: found 0 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 23
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: c0100000-c01fffff
  PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
  IO window: 00004000-000040ff
  IO window: 00004400-000044ff
  PREFETCH window: e8000000-e9ffffff
  MEM window: c2000000-c3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
  IO window: 00004800-000048ff
  IO window: 00004c00-00004cff
  PREFETCH window: ea000000-ebffffff
  MEM window: c4000000-c5ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-8fff
  MEM window: c0200000-cfffffff
  PREFETCH window: e8000000-efffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
**** SET: Misaligned resource pointer: c19d5502 Type 07 Len 0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
**** SET: Misaligned resource pointer: c19d5502 Type 07 Len 0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: SXGA+ Single (85MHz)    
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
Time: tsc clocksource has been installed.
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon Lf 
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (56 C)
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.21.0 20051229 on minor 0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
parport0: irq 7 detected
Time: pit clocksource has been installed.
lp0: using parport0 (polling).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
**** SET: Misaligned resource pointer: c1984c02 Type 07 Len 0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATCS05-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA745 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04d8, PCI irq 5
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
usbmon: debugfs is not available
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
usbcore: registered new driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
MC: drivers/edac/edac_mc.c version edac_mc  Ver: 2.0.0 Jan  5 2006
EDAC PCI- Detected Parity Error on 0000:00:1e.0
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
EDAC PCI- Detected Parity Error on 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Time: acpi_pm clocksource has been installed.
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
intel8x0_measure_ac97_clock: measured 55464 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA device list:
  #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 5
  #1: Intel 82801DB-ICH4 Modem at 0x2400, irq 5
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
IrCOMM protocol (Dag Brattli)
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.6
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda5
PM: Checking swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices: 
 LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M 
ACPI: (supports S0 S3 S4 S5)
EDAC PCI- Detected Parity Error on 0000:00:1e.0
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 180k freed
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
Adding 498920k swap on /dev/hda5.  Priority:-1 extents:1 across:498920k
EDAC PCI- Detected Parity Error on 0000:00:1e.0
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input3
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
kjournald starting.  Commit interval 600 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
**** SET: Misaligned resource pointer: f7f24602 Type 07 Len 0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
EDAC PCI- Detected Parity Error on 0000:00:1e.0
usb 2-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
**** SET: Misaligned resource pointer: c1b1a3c2 Type 07 Len 0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hci_usb_probe: Can't set isoc interface settings
hub 2-1:1.0: hub_port_status failed (err = -71)
hub 2-1:1.0: hub_port_status failed (err = -71)
hub 2-1:1.0: hub_port_status failed (err = -71)
hub 2-1:1.0: hub_port_status failed (err = -71)
usb 3-1: USB disconnect, address 2
EDAC PCI- Detected Parity Error on 0000:00:1e.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
usb 2-2: USB disconnect, address 3
usb 4-3: new high speed USB device using ehci_hcd and address 2
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
EDAC PCI- Detected Parity Error on 0000:00:1e.0
usb 4-4: new high speed USB device using ehci_hcd and address 3
usb 4-4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 4-3.1: new high speed USB device using ehci_hcd and address 5
usb 4-3.1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 4-3.3: new low speed USB device using ehci_hcd and address 6
EDAC PCI- Detected Parity Error on 0000:00:1e.0
usb 4-3.3: configuration #1 chosen from 1 choice
input: Microsoft Microsoft IntelliMouse® Explorer as /class/input/input4
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.7-3.3
usb 4-3.4: new full speed USB device using ehci_hcd and address 7
usb 4-3.4: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
  Vendor: TOSHIBA   Model: MK3017GAP         Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
sda: Write Protect is off
sda: Mode Sense: 33 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
sda: Write Protect is off
sda: Mode Sense: 33 00 00 00
sda: assuming drive cache: write through
 sda:<2>EDAC PCI- Detected Parity Error on 0000:00:1e.0
 sda1
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
  Vendor: USB 2.0   Model: Storage Device    Rev: 0100
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 08 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 08 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1 sdb2
sd 2:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
io scheduler cfq registered
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Unable to handle kernel NULL pointer dereference at virtual address 00000020
 printing eip:
c028b7cf
*pde = 372d4067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT 
last sysfs file: /block/hda/queue/scheduler
Modules linked in: aes_i586 cfq_iosched ehci_hcd uhci_hcd
CPU:    0
EIP:    0060:[<c028b7cf>]    Not tainted VLI
EFLAGS: 00013202   (2.6.15-mm1) 
EIP is at agp_collect_device_status+0x14/0xd4
eax: 00000058   ebx: f75c1f08   ecx: 00000000   edx: 00000058
esi: 1f000207   edi: c19a80c0   ebp: c19af428   esp: f75c1ed0
ds: 007b   es: 007b   ss: 0068
Process Xorg (pid: 3843, threadinfo=f75c0000 task=f7890550)
Stack: <0>00003246 1f000217 1f000207 1f000217 f75c1f08 1f000207 c19a80c0 c19af428 
       <0>c028b9e9 f75c1f08 00000002 00000000 c19720ec 00000000 1f000217 c19af400 
       <0>00000032 00000001 c028bfb5 c0297262 c19af400 c02972af 1f000207 c029727f 
Call Trace:
 [<c028b9e9>] agp_generic_enable+0x72/0x10f
 [<c028bfb5>] agp_enable+0xa/0xb
 [<c0297262>] drm_agp_enable+0x2c/0x49
 [<c02972af>] drm_agp_enable_ioctl+0x30/0x39
 [<c029727f>] drm_agp_enable_ioctl+0x0/0x39
 [<c029311d>] drm_ioctl+0x93/0x1e4
 [<c0163664>] do_ioctl+0x64/0x6d
 [<c01637a9>] vfs_ioctl+0x50/0x1be
 [<c01ae603>] write_unix_file+0x0/0x500
 [<c016394b>] sys_ioctl+0x34/0x51
 [<c0102d0f>] sysenter_past_esp+0x54/0x75
Code: 02 00 00 00 e8 94 66 f9 ff 89 c6 84 c0 74 de 89 f2 0f b6 c2 5b 5e c3 55 57 56 53 83 ec 10 89 54 24 08 89 4c 24 04 e8 bc ff ff ff <8b> 15 20 00 00 00 8b 1d 10 00 00 00 0f b6 c0 8d 48 04 8d 6c 24 
 <3>[drm:drm_release] *ERROR* Device busy: 1 0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0
EDAC PCI- Detected Parity Error on 0000:00:1e.0

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 23:31 Etienne Lorrain
@ 2006-01-06  0:15 ` Andrew Morton
  2006-01-06  0:36   ` Linus Torvalds
  0 siblings, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2006-01-06  0:15 UTC (permalink / raw)
  To: Etienne Lorrain
  Cc: linux-kernel, Linus Torvalds, Ivan Kokshaysky, Greg KH,
	David Woodhouse, Dave Airlie

Etienne Lorrain <etienne_lorrain@yahoo.fr> wrote:
>
>   I have my own OOPs with 2.6.15-mm1, this kind:

Thanks for the report.  This kernel seems to have been a bit of a disaster
- too much eggnog or something.

> Jan  5 22:40:04 localhost fstab-sync[1919]: added mount point /media/floppy
> for /dev/fd0
> Jan  5 22:41:37 localhost kernel: Unable to handle kernel NULL pointer
> dereference at virtual address 00000010
> Jan  5 22:41:37 localhost kernel:  printing eip:
> Jan  5 22:41:37 localhost kernel: c013da3a
> Jan  5 22:41:37 localhost kernel: *pde = 1d165067
> Jan  5 22:41:37 localhost kernel: *pte = 00000000
> Jan  5 22:41:37 localhost kernel: Oops: 0000 [#1]
> Jan  5 22:41:37 localhost kernel: last sysfs file: /class/vc/vcs7/dev
> Jan  5 22:41:37 localhost kernel: Modules linked in: autofs4 pcmcia
> ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables vfat fat
> yenta_socket rsrc_nonstatic pcmcia_core uhci_hcd ehci_hcd i2c_viapro
> i2c_core snd_via82xx snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
> snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ext3
> jbd
> Jan  5 22:41:37 localhost kernel: CPU:    0
> Jan  5 22:41:37 localhost kernel: EIP:    0060:[<c013da3a>]    Not tainted
> VLI
> Jan  5 22:41:37 localhost kernel: EFLAGS: 00013256   (2.6.15-mm1)
> Jan  5 22:41:37 localhost kernel: EIP is at __audit_inode+0xba/0x190
> Jan  5 22:41:37 localhost kernel: eax: 00000008   ebx: 00000000   ecx:
> dcbf02c0   edx: d9343268
> Jan  5 22:41:37 localhost kernel: esi: d922ef44   edi: d9fd3000   ebp:
> dcbf02c0   esp: d922ee88
> Jan  5 22:41:37 localhost kernel: ds: 007b   es: 007b   ss: 0068
> Jan  5 22:41:37 localhost kernel: Process X (pid: 2192, threadinfo=d922e000
> task=d8abcff0)
> Jan  5 22:41:37 localhost kernel: Stack: <0>00000003 00000000 dcbf02c0
> fffffffe d922ef44 d9fd3000 00000003 c017002c
> Jan  5 22:41:37 localhost kernel:        <0>d9fd3000 d9343268 00000101
> 00000101 00000101 d922ef44 ffffffe9 00000003
> Jan  5 22:41:37 localhost kernel:        <0>c0170096 d922e000 00000002
> d922ef44 00000006 c017011f d9fd3000 00000001
> Jan  5 22:41:38 localhost gdm[2183]: gdm_slave_xioerror_handler: Fatal X
> error - Restarting :0
> Jan  5 22:41:38 localhost kernel: Call Trace:
> Jan  5 22:41:39 localhost kernel:  [<c017002c>] path_lookup+0x1ac/0x1d0
> Jan  5 22:41:40 localhost kernel:  [<c0170096>]
> __path_lookup_intent_open+0x46/0xa0
> Jan  5 22:41:41 localhost kernel:  [<c017011f>] path_lookup_open+0x2f/0x40
> Jan  5 22:41:41 localhost kernel:  [<c0170b33>] open_namei+0x73/0x530
> Jan  5 22:41:42 localhost kernel:  [<c0144cdd>] __alloc_pages+0x5d/0x390
> Jan  5 22:41:42 localhost kernel:  [<c015e8b8>] filp_open+0x38/0x60
> Jan  5 22:41:42 localhost kernel:  [<c015eaf0>] get_unused_fd+0xb0/0xe0
> Jan  5 22:41:42 localhost kernel:  [<c015ec45>] do_sys_open+0x55/0x100
> Jan  5 22:41:42 localhost kernel:  [<c01031a5>] syscall_call+0x7/0xb
> Jan  5 22:41:43 localhost kernel: Code: 42 38 89 d8 c1 e0 05 8d 04 98 c7 44
> 10 3c 00 00 00 00 89 d8 8b 54 24 24 8b 4c 24 08 c1 e0 05 8d 04 98 8d 2c 08
> 8b 82 c4 00 00 00 <8b> 40 08 89 45 48 0f b7 42 28 66 89 45 4c 8b 42 30 89 45
> 50 8b

The audit tree.

> Jan  5 22:44:05 localhost shutdown: shutting down for system reboot
> Jan  5 22:44:05 localhost init: Switching to runlevel: 6
> Jan  5 22:44:17 localhost shutdown: shutting down for system reboot
> Jan  5 22:44:26 localhost dbus: avc:  2 AV entries and 2/512 buckets used,
> longest chain length 1
> Jan  5 22:44:32 localhost xfs[1848]: terminating
> Jan  5 22:44:34 localhost shutdown: shutting down for system reboot
> Jan  5 22:44:41 localhost last message repeated 7 times
> Jan  5 22:44:58 localhost kernel:  <6>[drm] Initialized drm 1.0.1 20051102
> Jan  5 22:44:59 localhost kernel: [drm] Initialized radeon 1.21.0 20051229
> on minor 0
> Jan  5 22:45:01 localhost kernel: mtrr: 0xd0000000,0x8000000 overlaps
> existing 0xd0000000,0x4000000
> Jan  5 22:45:01 localhost kernel: agpgart: Found an AGP 3.5 compliant device
> at 0000:00:00.0.
> Jan  5 22:45:01 localhost kernel: Unable to handle kernel NULL pointer
> dereference at virtual address 00000020
> Jan  5 22:45:01 localhost kernel:  printing eip:
> Jan  5 22:45:01 localhost kernel: c0250b08
> Jan  5 22:45:01 localhost kernel: *pde = 1d4d1067
> Jan  5 22:45:01 localhost kernel: *pte = 00000000
> Jan  5 22:45:01 localhost kernel: Oops: 0000 [#2]
> Jan  5 22:45:01 localhost kernel: last sysfs file: /class/drm/card0/dev
> Jan  5 22:45:01 localhost kernel: Modules linked in: radeon drm autofs4
> pcmcia ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables vfat fat
> yenta_socket rsrc_nonstatic pcmcia_core uhci_hcd ehci_hcd i2c_viapro
> i2c_core snd_via82xx snd_ac97_codec snd_ac97_bus snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
> snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ext3
> jbd
> Jan  5 22:45:01 localhost kernel: CPU:    0
> Jan  5 22:45:01 localhost kernel: EIP:    0060:[<c0250b08>]    Not tainted
> VLI
> Jan  5 22:45:01 localhost kernel: EFLAGS: 00013282   (2.6.15-mm1)
> Jan  5 22:45:01 localhost kernel: EIP is at
> agp_collect_device_status+0x18/0x130
> Jan  5 22:45:01 localhost kernel: eax: 00000058   ebx: df8cd008   ecx:
> 00003092   edx: 00000058
> Jan  5 22:45:01 localhost kernel: esi: 00000032   edi: 00000001   ebp:
> ddfb3900   esp: d978ceb4
> Jan  5 22:45:01 localhost kernel: ds: 007b   es: 007b   ss: 0068
> Jan  5 22:45:01 localhost kernel: Process X (pid: 2266, threadinfo=d978c000
> task=db21a960)
> Jan  5 22:45:01 localhost kernel: Stack: <0>00000000 00000084 00000004
> d978cec4 1f000a07 df8cd008 00000032 00000001
> Jan  5 22:45:01 localhost kernel:        <0>ddfb3900 c0250ddd df8cd008
> 1f000201 1f000a07 d978cef0 ddfb3900 1f000a07
> Jan  5 22:45:01 localhost kernel:        <0>da0c6060 e14acd9f df8cd008
> 1f000201 da0c6060 e14ace09 da0c6060 1f000201
> Jan  5 22:45:02 localhost kernel: Call Trace:
> Jan  5 22:45:02 localhost kernel:  [<c0250ddd>]
> agp_generic_enable+0x8d/0x160
> Jan  5 22:45:02 localhost kernel:  [<e14acd9f>] drm_agp_enable+0x3f/0x60
> [drm]
> Jan  5 22:45:04 localhost kernel:  [<e14ace09>]
> drm_agp_enable_ioctl+0x49/0x60 [drm]
> Jan  5 22:45:05 localhost kernel:  [<e14acdc0>]
> drm_agp_enable_ioctl+0x0/0x60 [drm]
> Jan  5 22:45:05 localhost kernel:  [<e14a80ba>] drm_ioctl+0xaa/0x216 [drm]
> Jan  5 22:45:05 localhost kernel:  [<c0173c41>] do_ioctl+0x81/0x90
> Jan  5 22:45:06 localhost kernel:  [<c0173db0>] vfs_ioctl+0x60/0x1f0
> Jan  5 22:45:06 localhost kernel:  [<c0173fc8>] sys_ioctl+0x88/0xa0
> Jan  5 22:45:06 localhost kernel:  [<c01031a5>] syscall_call+0x7/0xb
> Jan  5 22:45:06 localhost kernel: Code: c4 08 89 f2 5b 5e 0f b6 c2 c3 89 f6
> 8d bc 27 00 00 00 00 83 ec 24 89 5c 24 14 89 74 24 18 89 7c 24 1c 89 6c 24
> 20 e8 98 ff ff ff <8b> 15 20 00 00 00 8b 0d 10 00 00 00 8d 6c 24 10 0f b6 c0
> 83 c0
> Jan  5 22:45:07 localhost kernel:  <3>[drm:drm_release] *ERROR* Device busy:
> 1 0
> Jan  5 22:45:15 localhost shutdown: shutting down for system reboot

DRM problems.

>  But because my command line is:
> Jan  5 22:39:29 localhost kernel: Kernel command line:
> /boot/linux-2.6.15-mm1a.kgz video=vesa keyboard=uk NumLock=on
> mouse=/dev/psaux COLS=160 LINES=64 LANG=en  rhgb ro root=/dev/hda3
> ide0=0x1f0,0x3f6,14 ide1=0x170,0x376
>  those may not count - even if it is unrelated.

I think it's legitimate - we've had another report of this.

>  I have:
> Jan  5 22:39:29 localhost kernel: Linux version 2.6.15-mm1
> (etienne@localhost.localdomain) (gcc version 4.0.1 20050727 (Red Hat
> 4.0.1-5)) #1 Thu Jan 5 21:25:17 GMT 2006
> 
> 
>  The only other strange thing is:
> Jan  5 22:39:29 localhost kernel: PCI: Using IRQ router VIA [1106/3177] at
> 0000:00:11.0
> Jan  5 22:39:29 localhost kernel:
> Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:06.0 doesn't
> match PIRQ mask - try pci=usepirqmask
> Jan  5 22:39:29 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:10.1
> Jan  5 22:39:29 localhost kernel:
> Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:11.1 doesn't
> match PIRQ mask - try pci=usepirqmask
>  but it is not new with -mm1.

hm.  That warning was added by a john@deater.net four years ago.  Various
PCI people cc'ed for suggestions, please.


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 23:33   ` Alexander Gran
@ 2006-01-06  0:21     ` Andrew Morton
  2006-01-06  0:28       ` Dave Airlie
  2006-01-06  0:38       ` Dave Jones
  0 siblings, 2 replies; 14+ messages in thread
From: Andrew Morton @ 2006-01-06  0:21 UTC (permalink / raw)
  To: Alexander Gran
  Cc: linux-kernel, linux-acpi, len.brown, ambx1, reiserfs-dev, airlied,
	vs, Dave Jones, Seth, Rohit

Alexander Gran <alex@zodiac.dnsalias.org> wrote:
>
> Am Donnerstag, 5. Januar 2006 23:47 schrieb Andrew Morton:
> > > Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing
> > > 0xe0000000,0x4000000
> > > Jan  5 16:22:48 t40 last message repeated 2 times
> >
> > Is that new?
> 
> Umm, no. I just thought it could be related to the X oops.

OK.  I don't know how common this is, nor whether it'll cause problems. 
David(s), do you know?

> > hm, it's not clear what oopsed.   Can you get a cleaner copy of this?
> 
> Hmm. I just rebooted to 2.6.15-mm1 runlevel one, fired up network and an sshd. 
> So I could ssh back to the oops machine. Well. X is clearer but even more 
> errors are in the logs now ;).
> First the X oops:
> EDAC PCI- Detected Parity Error on 0000:00:1e.0
> mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
> mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
> mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> Unable to handle kernel NULL pointer dereference at virtual address 00000020
>  printing eip:
> c028b7cf
> *pde = 372d4067
> *pte = 00000000
> Oops: 0000 [#1]
> PREEMPT
> last sysfs file: /block/hda/queue/scheduler
> Modules linked in: aes_i586 cfq_iosched ehci_hcd uhci_hcd
> CPU:    0
> EIP:    0060:[<c028b7cf>]    Not tainted VLI
> EFLAGS: 00013202   (2.6.15-mm1)
> EIP is at agp_collect_device_status+0x14/0xd4
> eax: 00000058   ebx: f75c1f08   ecx: 00000000   edx: 00000058
> esi: 1f000207   edi: c19a80c0   ebp: c19af428   esp: f75c1ed0
> ds: 007b   es: 007b   ss: 0068
> Process Xorg (pid: 3843, threadinfo=f75c0000 task=f7890550)
> Stack: <0>00003246 1f000217 1f000207 1f000217 f75c1f08 1f000207 c19a80c0 
> c19af428
>        <0>c028b9e9 f75c1f08 00000002 00000000 c19720ec 00000000 1f000217 
> c19af400
>        <0>00000032 00000001 c028bfb5 c0297262 c19af400 c02972af 1f000207 
> c029727f
> Call Trace:
>  [<c028b9e9>] agp_generic_enable+0x72/0x10f
>  [<c028bfb5>] agp_enable+0xa/0xb
>  [<c0297262>] drm_agp_enable+0x2c/0x49
>  [<c02972af>] drm_agp_enable_ioctl+0x30/0x39
>  [<c029727f>] drm_agp_enable_ioctl+0x0/0x39
>  [<c029311d>] drm_ioctl+0x93/0x1e4
>  [<c0163664>] do_ioctl+0x64/0x6d
>  [<c01637a9>] vfs_ioctl+0x50/0x1be
>  [<c01ae603>] write_unix_file+0x0/0x500
>  [<c016394b>] sys_ioctl+0x34/0x51
>  [<c0102d0f>] sysenter_past_esp+0x54/0x75
> Code: 02 00 00 00 e8 94 66 f9 ff 89 c6 84 c0 74 de 89 f2 0f b6 c2 5b 5e c3 55 
> 57 56 53 83 ec 10 89 54 24 08 89 4c 24 04 e8 bc ff ff ff <8b> 15 20 00 00 00 
> 8b 1d 10 00 00 0
> 0 0f b6 c0 8d 48 04 8d 6c 24
>  <3>[drm:drm_release] *ERROR* Device busy: 1 0
> EDAC PCI- Detected Parity Error on 0000:00:1e.0

OK.  I've been assuming that this is a DRM bug but I note that the AGP tree
has been dinking with agp_collect_device_status(), so perhaps I had the wrong
David.

> Additionally every second or so I got these console (and kernel of cource) 
> message:
> EDAC PCI- Detected Parity Error on 0000:00:1e.0

Alan, Rohit: do we expect that the EDAC fixes which you're cooking up will
address this?  I think not?

> lspci:
> 0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O 
> Controller (rev 03)
> 0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller 
> (rev 03)
> 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM 
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
> 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM 
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
> 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM 
> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
> 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 
> EHCI Controller (rev 01)
> 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
> 0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface 
> Bridge (rev 01)
> 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller 
> (rev 01)
> 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
> SMBus Controller (rev 01)
> 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM 
> (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
> 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
> AC'97 Modem Controller (rev 01)
> 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf 
> [FireGL 9000] (rev 02)
> 0000:02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
> Controller (rev 01)
> 0000:02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus 
> Controller (rev 01)
> 0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet 
> Controller (Mobile) (rev 03)
> 0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5211 802.11ab 
> NIC (rev 01)
> 
> Full log again attached
> 
> -- 
> Encrypted Mails welcome.
> PGP-Key at http://zodiac.dnsalias.org/misc/pgpkey.asc | Key-ID: 0x6D7DD291
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-06  0:21     ` Andrew Morton
@ 2006-01-06  0:28       ` Dave Airlie
  2006-01-06  0:38       ` Dave Jones
  1 sibling, 0 replies; 14+ messages in thread
From: Dave Airlie @ 2006-01-06  0:28 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Alexander Gran, linux-kernel, linux-acpi, len.brown, ambx1,
	reiserfs-dev, vs, Dave Jones, Seth, Rohit


> > Unable to handle kernel NULL pointer dereference at virtual address 00000020
> >  printing eip:
> > c028b7cf
> > *pde = 372d4067
> > *pte = 00000000
> > Oops: 0000 [#1]
> > PREEMPT
> > last sysfs file: /block/hda/queue/scheduler
> > Modules linked in: aes_i586 cfq_iosched ehci_hcd uhci_hcd
> > CPU:    0
> > EIP:    0060:[<c028b7cf>]    Not tainted VLI
> > EFLAGS: 00013202   (2.6.15-mm1)
> > EIP is at agp_collect_device_status+0x14/0xd4
> > eax: 00000058   ebx: f75c1f08   ecx: 00000000   edx: 00000058
> > esi: 1f000207   edi: c19a80c0   ebp: c19af428   esp: f75c1ed0
> > ds: 007b   es: 007b   ss: 0068
> > Process Xorg (pid: 3843, threadinfo=f75c0000 task=f7890550)
> > Stack: <0>00003246 1f000217 1f000207 1f000217 f75c1f08 1f000207 c19a80c0
> > c19af428
> >        <0>c028b9e9 f75c1f08 00000002 00000000 c19720ec 00000000 1f000217
> > c19af400
> >        <0>00000032 00000001 c028bfb5 c0297262 c19af400 c02972af 1f000207
> > c029727f
> > Call Trace:
> >  [<c028b9e9>] agp_generic_enable+0x72/0x10f
> >  [<c028bfb5>] agp_enable+0xa/0xb
> >  [<c0297262>] drm_agp_enable+0x2c/0x49
> >  [<c02972af>] drm_agp_enable_ioctl+0x30/0x39
> >  [<c029727f>] drm_agp_enable_ioctl+0x0/0x39
> >  [<c029311d>] drm_ioctl+0x93/0x1e4
> >  [<c0163664>] do_ioctl+0x64/0x6d
> >  [<c01637a9>] vfs_ioctl+0x50/0x1be
> >  [<c01ae603>] write_unix_file+0x0/0x500
> >  [<c016394b>] sys_ioctl+0x34/0x51
> >  [<c0102d0f>] sysenter_past_esp+0x54/0x75
> > Code: 02 00 00 00 e8 94 66 f9 ff 89 c6 84 c0 74 de 89 f2 0f b6 c2 5b 5e c3 55
> > 57 56 53 83 ec 10 89 54 24 08 89 4c 24 04 e8 bc ff ff ff <8b> 15 20 00 00 00
> > 8b 1d 10 00 00 0
> > 0 0f b6 c0 8d 48 04 8d 6c 24
> >  <3>[drm:drm_release] *ERROR* Device busy: 1 0
> > EDAC PCI- Detected Parity Error on 0000:00:1e.0
>
> OK.  I've been assuming that this is a DRM bug but I note that the AGP tree
> has been dinking with agp_collect_device_status(), so perhaps I had the wrong
> David.


Nothing in the DRM code in that area has changed enough to cuase that I
don't think... I'd guess AGP problems.. so I'll let DaveJ take a look and
prove its my fault :-)

Dave.

-- 
David Airlie, Software Engineer
http://www.skynet.ie/~airlied / airlied at skynet.ie
Linux kernel - DRI, VAX / pam_smb / ILUG


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-06  0:15 ` Andrew Morton
@ 2006-01-06  0:36   ` Linus Torvalds
  2006-01-06 10:04     ` Etienne Lorrain
  0 siblings, 1 reply; 14+ messages in thread
From: Linus Torvalds @ 2006-01-06  0:36 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Etienne Lorrain, linux-kernel, Ivan Kokshaysky, Greg KH,
	David Woodhouse, Dave Airlie



On Thu, 5 Jan 2006, Andrew Morton wrote:
> > 
> >  The only other strange thing is:
> > Jan  5 22:39:29 localhost kernel: PCI: Using IRQ router VIA [1106/3177] at
> > 0000:00:11.0
> > Jan  5 22:39:29 localhost kernel:
> > Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:06.0 doesn't
> > match PIRQ mask - try pci=usepirqmask
> > Jan  5 22:39:29 localhost kernel: PCI: Sharing IRQ 5 with 0000:00:10.1
> > Jan  5 22:39:29 localhost kernel:
> > Jan  5 22:39:29 localhost kernel: PCI: IRQ 0 for device 0000:00:11.1 doesn't
> > match PIRQ mask - try pci=usepirqmask
> >  but it is not new with -mm1.
> 
> hm.  That warning was added by a john@deater.net four years ago.  Various
> PCI people cc'ed for suggestions, please.

That warning is totally bogus. It shouldn't be printed out at all when 
"newirq" is 0 (as in this case). 

Even for a non-zero newirq, I suspect that 99% of the time, 
"pci=usepirqmask" would end up causing more problems than it could ever 
solve.

But this diff would seem to be the minimal fix.

The other problems _look_ like they are -mm related, not in plain 2.6.15. 
Etienne, can you confirm?

			Linus
---
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 19e6f48..ee8e016 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -846,7 +846,7 @@ static int pcibios_lookup_irq(struct pci
 	 * reported by the device if possible.
 	 */
 	newirq = dev->irq;
-	if (!((1 << newirq) & mask)) {
+	if (newirq && !((1 << newirq) & mask)) {
 		if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
 		else printk(KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n", newirq, pci_name(dev));
 	}

^ permalink raw reply related	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-06  0:21     ` Andrew Morton
  2006-01-06  0:28       ` Dave Airlie
@ 2006-01-06  0:38       ` Dave Jones
  1 sibling, 0 replies; 14+ messages in thread
From: Dave Jones @ 2006-01-06  0:38 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Alexander Gran, linux-kernel, linux-acpi, len.brown, ambx1,
	reiserfs-dev, airlied, vs, Seth, Rohit

On Thu, Jan 05, 2006 at 04:21:51PM -0800, Andrew Morton wrote:

 > > Am Donnerstag, 5. Januar 2006 23:47 schrieb Andrew Morton:
 > > > > Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing
 > > > > 0xe0000000,0x4000000
 > > > > Jan  5 16:22:48 t40 last message repeated 2 times
 > > >
 > > > Is that new?
 > > 
 > > Umm, no. I just thought it could be related to the X oops.
 > 
 > OK.  I don't know how common this is, nor whether it'll cause problems. 
 > David(s), do you know?

at worse, a video performance hit.

 > > EIP is at agp_collect_device_status+0x14/0xd4
 > OK.  I've been assuming that this is a DRM bug but I note that the AGP tree
 > has been dinking with agp_collect_device_status(), so perhaps I had the wrong
 > David.

I'm a moron. I'll fix it up.
I only tested the 'have no agp' case which this changed, and didn't test
the commoncase 'have agp'.  Doh.

		Dave


^ permalink raw reply	[flat|nested] 14+ messages in thread

* RE: Re. 2.6.15-mm1
@ 2006-01-06  2:05 Seth, Rohit
  0 siblings, 0 replies; 14+ messages in thread
From: Seth, Rohit @ 2006-01-06  2:05 UTC (permalink / raw)
  To: Andrew Morton, Alexander Gran
  Cc: linux-kernel, linux-acpi, Brown, Len, ambx1, reiserfs-dev,
	airlied, vs, Dave Jones

From: Andrew Morton Thursday, January 05, 2006 4:22 PM

>> 8b 1d 10 00 00 0
>> 0 0f b6 c0 8d 48 04 8d 6c 24
>>  <3>[drm:drm_release] *ERROR* Device busy: 1 0
>> EDAC PCI- Detected Parity Error on 0000:00:1e.0
>
>OK.  I've been assuming that this is a DRM bug but I note that the AGP
tree
>has been dinking with agp_collect_device_status(), so perhaps I had the
>wrong David.
>
>> Additionally every second or so I got these console (and kernel of
>cource)
>> message:
>> EDAC PCI- Detected Parity Error on 0000:00:1e.0
>
>Alan, Rohit: do we expect that the EDAC fixes which you're cooking up
will
>address this?  I think not?
>

Nops.  That one patch does not address this issue.

-rohit

^ permalink raw reply	[flat|nested] 14+ messages in thread

* RE: Re. 2.6.15-mm1
@ 2006-01-06  5:36 Brown, Len
  0 siblings, 0 replies; 14+ messages in thread
From: Brown, Len @ 2006-01-06  5:36 UTC (permalink / raw)
  To: Andrew Morton, Alexander Gran
  Cc: linux-kernel, linux-acpi, Adam Belay, reiserfs-dev, Dave Airlie,
	Vladimir V. Saveliev, linux-acpi


>> Jan  5 16:22:38 t40 kernel: pnp: PnP ACPI init
>> Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
>> Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
>> Jan  5 16:22:39 t40 last message repeated 10 times
>> Jan  5 16:22:39 t40 kernel: pnp: PnP ACPI: found 0 devices
>
>pnpacpi is unhappy.

pnpacpi is fixed:
http://lkml.org/lkml/2006/1/5/287

>> Jan  5 16:22:43 t40 kernel: **** SET: Misaligned resource pointer: f7db5502 
>
>acpi is unhappy.

Yes, that one is ours.  We'll track it here:

http://bugme.osdl.org/show_bug.cgi?id=5841

thanks,
-Len

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 22:47 ` Andrew Morton
  2006-01-05 23:33   ` Alexander Gran
@ 2006-01-06  9:30   ` Hans Reiser
  2006-01-06 18:29   ` Alexander Zarochentsev
  2 siblings, 0 replies; 14+ messages in thread
From: Hans Reiser @ 2006-01-06  9:30 UTC (permalink / raw)
  To: Andrew Morton
  Cc: Alexander Gran, linux-kernel, linux-acpi, Brown, Len, Adam Belay,
	reiserfs-dev, Dave Airlie, Vladimir V. Saveliev,
	Alexander Zarochentcev

Andrew Morton wrote:

>
>
>  
>
>>When X startet, the laptops crashed:
>>Jan  5 16:22:43 t40 kernel: <4>reiser4[syslogd(2729)]: disable_write_barrier 
>>(fs/reiser4/wander.c:233)[zam-1055]:
>>Jan  5 16:22:43 t40 kernel: WARNING: disabling write barrier
>>    
>>
>
>Vladimir, is that expected?
>  
>
Vladimir is in France skiing, as this is Russian Christmas right now. 

Zam says that this merely means that the underlying device does not
support write barriers, and the code uses synchronous writes for commits
instead of write barriers when this happens.  It should not affect
correctness.  He will comment more this evening (russian time) when he
gets home.   He suggests that he should change it from warning to
notice.  He also suggests that this code is new code, so it is possible
it has bugs.....

>  
>
>>Jan  5 16:22:43 t40 kernel:
>>Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 
>>0xe0000000,0x4000000
>>Jan  5 16:22:48 t40 last message repeated 2 times
>>    
>>
>
>Is that new?
>
>  
>
>>Jan  5 16:22:48 t40 kernel: agpgart: Found an AGP 2.0 compliant device at 
>>0000:00:00.0.
>>Jan  5 16:22:48 t40 kernel: c028b7cf
>>Jan  5 16:22:48 t40 kernel: Modules linked in: irtty_sir sir_dev cfq_iosched 
>>ehci_hcd uhci_hcd
>>Jan  5 16:22:48 t40 kernel: EIP:    0060:[<c028b7cf>]    Not tainted VLI
>>Jan  5 16:22:48 t40 kernel: EFLAGS: 00013202   (2.6.15-mm1)
>>Jan  5 16:22:48 t40 kernel:        <0>c028b9e9 f762ff08 00000002 00000000 
>>c19720ec 00000000 1f000217 c1a79400
>>Jan  5 16:22:48 t40 kernel:        <0>00000032 00000001 c028bfb5 c0297262 
>>c1a79400 c02972af 1f000207 c029727f
>>    
>>
>
>hm, it's not clear what oopsed.   Can you get a cleaner copy of this?
>
>  
>
>>Jan  5 16:22:48 t40 kernel:  <3>[drm:drm_release] *ERROR* Device busy: 1 0
>>    
>>
>
>drm is unhappy
>
>
>
>  
>


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-06  0:36   ` Linus Torvalds
@ 2006-01-06 10:04     ` Etienne Lorrain
  0 siblings, 0 replies; 14+ messages in thread
From: Etienne Lorrain @ 2006-01-06 10:04 UTC (permalink / raw)
  To: Linus Torvalds, Andrew Morton
  Cc: Etienne Lorrain, linux-kernel, Ivan Kokshaysky, Greg KH,
	David Woodhouse, Dave Airlie

--- Linus Torvalds <torvalds@osdl.org> wrote :
> The other problems _look_ like they are -mm related, not in
> plain 2.6.15. 
> Etienne, can you confirm?

  Plain linux-2.6.15 is perfectly working for me, excluding the
 small "pci=usepirqmask" warning, even when I use the Gujin
 bootloader.
  I still sometimes have strange early reboot problem when
 the kernel is not loaded and run at 1 Mbyte but at a higher
 address - but that can be considered as still "unsupported
 configuration". It may even be my fault...

  Etienne.


	
	
		
___________________________________________________________________________ 
Nouveau : téléphonez moins cher avec Yahoo! Messenger. Appelez le monde entier à partir de 0,012 €/minute ! 
Téléchargez sur http://fr.messenger.yahoo.com

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Re. 2.6.15-mm1
  2006-01-05 22:47 ` Andrew Morton
  2006-01-05 23:33   ` Alexander Gran
  2006-01-06  9:30   ` Hans Reiser
@ 2006-01-06 18:29   ` Alexander Zarochentsev
  2 siblings, 0 replies; 14+ messages in thread
From: Alexander Zarochentsev @ 2006-01-06 18:29 UTC (permalink / raw)
  To: reiserfs-dev
  Cc: Andrew Morton, Alexander Gran, linux-kernel, linux-acpi,
	Brown, Len, Adam Belay, Dave Airlie, Vladimir V. Saveliev

On Friday 06 January 2006 01:47, Andrew Morton wrote:
> Alexander Gran <alex@zodiac.dnsalias.org> wrote:
> > Hi,
> >
> > just tried 2.6.15-mm1 on my thinkpad. Various aspects that didn't work /
> > look good:
>
> Thanks.  A few people have some work to do before they are ready to merge
> to 2.6.16.
>
> > Jan  5 16:22:38 t40 kernel: pnp: PnP ACPI init
> > Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
> > Jan  5 16:22:38 t40 kernel: pnp: PnPACPI: unknown resource type 7
> > Jan  5 16:22:39 t40 last message repeated 10 times
> > Jan  5 16:22:39 t40 kernel: pnp: PnP ACPI: found 0 devices
>
> pnpacpi is unhappy.
>
> > All over the place logs like this:
> > Jan  5 16:22:43 t40 kernel: **** SET: Misaligned resource pointer:
> > f7db5502 Type 07 Len 0
> > Unknown to me so far..
>
> acpi is unhappy.
>
> > When X startet, the laptops crashed:
> > Jan  5 16:22:43 t40 kernel: <4>reiser4[syslogd(2729)]:
> > disable_write_barrier (fs/reiser4/wander.c:233)[zam-1055]:
> > Jan  5 16:22:43 t40 kernel: WARNING: disabling write barrier

It means submit_bio(WRITE_BARRIER, bio) fails and reiser4 falls back to 
synchronous write in the transaction commit code.  

Ext3, reiserfs do similar checks in their code and all issue warnings if those 
checks fail.  But only ext3, it seems, has write barrier support disabled by 
default.

> Vladimir, is that expected?
>
> > Jan  5 16:22:43 t40 kernel:
> > Jan  5 16:22:47 t40 kernel: mtrr: 0xe0000000,0x8000000 overlaps existing
> > 0xe0000000,0x4000000
> > Jan  5 16:22:48 t40 last message repeated 2 times
>
> Is that new?
>
> > Jan  5 16:22:48 t40 kernel: agpgart: Found an AGP 2.0 compliant device at
> > 0000:00:00.0.
> > Jan  5 16:22:48 t40 kernel: c028b7cf
> > Jan  5 16:22:48 t40 kernel: Modules linked in: irtty_sir sir_dev
> > cfq_iosched ehci_hcd uhci_hcd
> > Jan  5 16:22:48 t40 kernel: EIP:    0060:[<c028b7cf>]    Not tainted VLI
> > Jan  5 16:22:48 t40 kernel: EFLAGS: 00013202   (2.6.15-mm1)
> > Jan  5 16:22:48 t40 kernel:        <0>c028b9e9 f762ff08 00000002 00000000
> > c19720ec 00000000 1f000217 c1a79400
> > Jan  5 16:22:48 t40 kernel:        <0>00000032 00000001 c028bfb5 c0297262
> > c1a79400 c02972af 1f000207 c029727f
>
> hm, it's not clear what oopsed.   Can you get a cleaner copy of this?
>
> > Jan  5 16:22:48 t40 kernel:  <3>[drm:drm_release] *ERROR* Device busy: 1
> > 0
>
> drm is unhappy

-- 
Alex.

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2006-01-06 18:30 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-05 17:01 Re. 2.6.15-mm1 Alexander Gran
2006-01-05 22:47 ` Andrew Morton
2006-01-05 23:33   ` Alexander Gran
2006-01-06  0:21     ` Andrew Morton
2006-01-06  0:28       ` Dave Airlie
2006-01-06  0:38       ` Dave Jones
2006-01-06  9:30   ` Hans Reiser
2006-01-06 18:29   ` Alexander Zarochentsev
  -- strict thread matches above, loose matches on Subject: below --
2006-01-05 23:31 Etienne Lorrain
2006-01-06  0:15 ` Andrew Morton
2006-01-06  0:36   ` Linus Torvalds
2006-01-06 10:04     ` Etienne Lorrain
2006-01-06  2:05 Seth, Rohit
2006-01-06  5:36 Brown, Len

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox