From: Greg KH <gregkh@suse.de>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz
Subject: [GIT PATCH] PCI patches for 2.6.15 - retry
Date: Mon, 9 Jan 2006 12:37:11 -0800 [thread overview]
Message-ID: <20060109203711.GA25023@kroah.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 7682 bytes --]
Here are some PCI patches against your latest git tree. They have all
been in the -mm tree for a while with no problems. I've pulled out all
of the offending patches that people objected to, or ones that crashed
older machines from the last series I sent you.
The thing that touches so many different files are the change from the
pci_module_init() to pci_register_driver() that was done by Richard
Knutsson. Other big stuff is the addition of the pci error recovery
framework, after many different revisions and reworks.
There are also some pci hotplug fixes, and quirks added.
Please pull from:
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6.git/
or if master.kernel.org hasn't synced up yet:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6.git/
The full patches will be sent to the linux-pci mailing list, if anyone
wants to see them.
thanks,
greg k-h
Documentation/filesystems/sysfs-pci.txt | 21 +-
Documentation/pci-error-recovery.txt | 246 +++++++++++++++++++++++++++
MAINTAINERS | 7
arch/alpha/kernel/sys_alcor.c | 3
arch/alpha/kernel/sys_sio.c | 6
arch/frv/mb93090-mb00/pci-frv.c | 8
arch/frv/mb93090-mb00/pci-irq.c | 4
arch/i386/kernel/scx200.c | 2
arch/i386/pci/acpi.c | 2
arch/i386/pci/fixup.c | 7
arch/i386/pci/irq.c | 42 ++--
arch/mips/vr41xx/common/vrc4173.c | 2
arch/ppc/kernel/pci.c | 21 +-
arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 11 -
arch/sparc64/kernel/ebus.c | 15 -
drivers/acpi/pci_irq.c | 7
drivers/block/DAC960.c | 2
drivers/block/cciss.c | 2
drivers/block/sx8.c | 2
drivers/block/umem.c | 2
drivers/hwmon/vt8231.c | 2
drivers/media/radio/radio-gemtek-pci.c | 2
drivers/media/radio/radio-maxiradio.c | 2
drivers/media/video/bttv-driver.c | 2
drivers/media/video/saa7134/saa7134-core.c | 2
drivers/parport/parport_serial.c | 2
drivers/pci/hotplug/acpiphp_glue.c | 6
drivers/pci/hotplug/cpqphp.h | 8
drivers/pci/hotplug/cpqphp_core.c | 127 +++++++------
drivers/pci/hotplug/cpqphp_ctrl.c | 28 ---
drivers/pci/hotplug/cpqphp_sysfs.c | 138 ++++++++++++---
drivers/pci/hotplug/ibmphp_pci.c | 2
drivers/pci/hotplug/pciehp_core.c | 92 +++++-----
drivers/pci/hotplug/pciehp_hpc.c | 19 +-
drivers/pci/hotplug/pciehp_pci.c | 52 +++--
drivers/pci/hotplug/pciehprm_acpi.c | 13 -
drivers/pci/hotplug/rpadlpar_core.c | 27 --
drivers/pci/hotplug/rpaphp_pci.c | 47 -----
drivers/pci/hotplug/shpchp.h | 4
drivers/pci/hotplug/shpchp_core.c | 16 +
drivers/pci/hotplug/shpchp_ctrl.c | 37 ----
drivers/pci/hotplug/shpchp_hpc.c | 138 +++++++++------
drivers/pci/hotplug/shpchp_pci.c | 19 +-
drivers/pci/pci.c | 7
drivers/pci/pci.h | 5
drivers/pci/pcie/portdrv_core.c | 4
drivers/pci/probe.c | 49 ++++-
drivers/pci/proc.c | 3
drivers/pci/quirks.c | 26 ++
drivers/pci/remove.c | 3
drivers/pcmcia/vrc4173_cardu.c | 2
drivers/serial/serial_txx9.c | 2
drivers/video/cyblafb.c | 1
include/linux/pci.h | 69 +++++++
sound/oss/ad1889.c | 2
sound/oss/btaudio.c | 2
sound/oss/cmpci.c | 2
sound/oss/cs4281/cs4281m.c | 2
sound/oss/cs46xx.c | 2
sound/oss/emu10k1/main.c | 2
sound/oss/es1370.c | 2
sound/oss/es1371.c | 2
sound/oss/ite8172.c | 2
sound/oss/kahlua.c | 2
sound/oss/maestro.c | 2
sound/oss/nec_vrc5477.c | 2
sound/oss/nm256_audio.c | 2
sound/oss/rme96xx.c | 2
sound/oss/sonicvibes.c | 2
sound/oss/ymfpci.c | 2
70 files changed, 956 insertions(+), 444 deletions(-)
Adrian Bunk:
PCI Hotplug: cpqphp_ctrl.c: remove dead code
PCI: drivers/pci: some cleanups
Benjamin Herrenschmidt:
PCI: Export pci_cfg_space_size
Daniel Marjamäki:
PCI: irq.c: trivial printk and DBG updates
Daniel Yeisley:
PCI Quirk: 1K I/O space granularity on Intel P64H2
Dominik Brodowski:
PCI: use bus numbers sparsely, if necessary
Greg Kroah-Hartman:
PCI Hotplug: fix up the sysfs file in the compaq pci hotplug driver
drivers/sound/oss: Replace pci_module_init() with pci_register_driver()
Hanna Linder:
PCI: arch/i386/pci/acpi.c: use for_each_pci_dev
Jesper Juhl:
PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/cpqphp_core.c
PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/rpaphp_pci.c
PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.c
PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/pciehprm_acpi.c
Jesse Barnes:
PCI: document sysfs rom file interface
PCI: update Toshiba ohci quirk DMI table
Jiri Slaby:
PCI: pci_find_device remove (ppc/platforms/85xx/mpc85xx_cds_common.c)
PCI: pci_find_device remove (alpha/kernel/sys_sio.c)
PCI: pci_find_device remove (alpha/kernel/sys_alcor.c)
PCI: pci_find_device remove (ppc/kernel/pci.c)
PCI: arch: pci_find_device remove (frv/mb93090-mb00/pci-irq.c)
PCI: pci_find_device remove (frv/mb93090-mb00/pci-frv.c)
PCI: pci_find_device remove (sparc64/kernel/ebus.c)
Jordan, William P:
PCI Hotplug: ibmphp_pci.c copy-n-paste fix
Kenji Kaneshige:
shpchp: fix improper reference to Slot Avail Regsister
shpchp: fix improper reference to Mode 1 ECC Capability" bit
shpchp: replace pci_find_slot() with pci_get_slot()
shpchp: fix improper mmio mapping
shpchp: fix improper wait for command completion
shpchp: fix improper write to Command Completion Detect bit
shpchp: Implement get_address callback
Kristen Accardi:
pci: use pin stored in pci_dev
apci: use pin stored in pci_dev
pci: store PCI_INTERRUPT_PIN in pci_dev
pci: call pci_read_irq for bridges
acpiphp: only size new bus
linas:
PCI Error Recovery: header file patch
linas@austin.ibm.com:
PCI Hotplug/powerpc: remove duplicated code
PCI Hotplug/powerpc: more removal of duplicated code
PCI Error Recovery: documentation
Rajesh Shah:
pciehp: allow bridged card hotplug
Richard Knutsson:
arch: Replace pci_module_init() with pci_register_driver()
drivers/block: Replace pci_module_init() with pci_register_driver()
drivers/*rest*: Replace pci_module_init() with pci_register_driver()
Sergey Vlasov:
PCIE: make bus_id for PCI Express devices unique
Thomas Schaefer:
pciehp: handle sticky power-fault status
next reply other threads:[~2006-01-09 20:37 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-09 20:37 Greg KH [this message]
2006-01-10 0:00 ` [GIT PATCH] PCI patches for 2.6.15 - retry Linus Torvalds
2006-01-10 0:44 ` Andrew Morton
2006-01-10 1:49 ` Alan Cox
2006-01-10 1:49 ` Andrew Morton
2006-01-10 10:03 ` Reuben Farrelly
2006-01-12 3:55 ` Reuben Farrelly
2006-01-12 4:29 ` Andrew Morton
2006-01-12 4:55 ` Reuben Farrelly
2006-01-12 11:42 ` Alan Cox
2006-01-12 20:59 ` Jeff Garzik
2006-01-16 13:11 ` Reuben Farrelly
2006-01-12 20:55 ` Jeff Garzik
2006-01-13 0:16 ` Alan Cox
2006-01-10 2:28 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060109203711.GA25023@kroah.com \
--to=gregkh@suse.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox