change eth0 to sn0 ?

change eth0 to sn0 ?

[Ratheesh k]

i m using  fc3


$ ifconfig

eth0      Link encap:Ethernet  HWaddr 00:11:2F:38:07:D9
           inet addr:172.16.7.104  Bcast:172.16.7.255  Mask:255.255.252.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:6506 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5120 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1256 txqueuelen:1000
          RX bytes:1951142 (1.8 Mb)  TX bytes:1027381 (1003.3 Kb)
          Interrupt:23 Base address:0x3800

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:78 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5420 (5.2 Kb)  TX bytes:5420 (5.2 Kb)


     $ ifconfig eth0 down
     $ ifconfig sn0  172.16.8.1   netmask 255.255.252.0

sn0  intreface is added by driver .


what i want is , i want to  use the hw addreess of eth0 , irq of eth0 to sn0 
.

ie , i want  to do

$ ifconfig  sno 172.16.8.1 mtu 1500 irq 193 hw ether 00:11:2f:77:fd:c2

what i have to do ?

_________________________________________________________________
Spice up your IM conversations. New, colorful and animated emoticons. Get 
chatting! http://server1.msn.co.in/SP05/emoticons/

Re: change eth0 to sn0 ?

[Bernd Eckenfels]

Ratheesh k <ratheesh.ksz@hotmail.com> wrote:
> eth0      Link encap:Ethernet  HWaddr 00:11:2F:38:07:D9
>           inet addr:172.16.7.104  Bcast:172.16.7.255  Mask:255.255.252.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:6506 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:5120 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:1256 txqueuelen:1000
>          RX bytes:1951142 (1.8 Mb)  TX bytes:1027381 (1003.3 Kb)
>          Interrupt:23 Base address:0x3800

>     $ ifconfig eth0 down
      # nameif sn0 00:11:2F:38:07:D9

Gruss
Bernd

Re: change eth0 to sn0 ?

[Tomasz Torcz]

[-- Attachment #1: Type: text/plain, Size: 349 bytes --]

On Sat, Jan 14, 2006 at 03:21:14PM +0100, Bernd Eckenfels wrote:
> >     $ ifconfig eth0 down
>       # nameif sn0 00:11:2F:38:07:D9

 Better use standard tools:

 ip link set name sn0 dev nf

-- 
Tomasz Torcz                Only gods can safely risk perfection,
zdzichu@irc.-nie.spam-.pl     it's a dangerous thing for a man.  -- Alia


[-- Attachment #2: Type: application/pgp-signature, Size: 229 bytes --]

change eth0 to sn0 ?

[Ratheesh k]

i m using  fc3


$ ifconfig

eth0      Link encap:Ethernet  HWaddr 00:11:2F:38:07:D9
           inet addr:172.16.7.104  Bcast:172.16.7.255  Mask:255.255.252.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:6506 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5120 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1256 txqueuelen:1000
          RX bytes:1951142 (1.8 Mb)  TX bytes:1027381 (1003.3 Kb)
          Interrupt:23 Base address:0x3800

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:78 errors:0 dropped:0 overruns:0 frame:0
          TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5420 (5.2 Kb)  TX bytes:5420 (5.2 Kb)


     $ ifconfig eth0 down
     $ ifconfig sn0  172.16.8.1   netmask 255.255.252.0

sn0  intreface is added by driver .


what i want is , i want to  use the hw addreess of eth0 , irq of eth0 to sn0 
.

ie , i want  to do

$ ifconfig  sno 172.16.8.1 mtu 1500 irq 193 hw ether 00:11:2f:77:fd:c2

what i have to do ?

_________________________________________________________________
How good are you in a Formula One car? Play now 
http://server1.msn.co.in/sp05/tataracing/onlinegame.asp

Re: change eth0 to sn0 ?

[Jon Masters]

On 1/14/06, Ratheesh k <ratheesh.ksz@hotmail.com> wrote:

> what i want is , i want to  use the hw addreess of eth0 , irq of eth0 to sn0

> $ ifconfig  sno 172.16.8.1 mtu 1500 irq 193 hw ether 00:11:2f:77:fd:c2

You don't want to set the IRQ of sn0 equal to that of eth0 :-)

Jon.