[PATCH] e1000 C style badness

[Jens Axboe <axboe@suse.de>]

Hi,

Recent e1000 updates introduced variable declarations after code. Fix
those up again.

Signed-off-by: Jens Axboe <axboe@suse.de>

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d0a5d16..ca68a04 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2142,9 +2142,11 @@ e1000_leave_82542_rst(struct e1000_adapt
 		e1000_pci_set_mwi(&adapter->hw);
 
 	if(netif_running(netdev)) {
+		struct e1000_rx_ring *ring;
+
 		e1000_configure_rx(adapter);
 		/* No need to loop, because 82542 supports only 1 queue */
-		struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+		ring = &adapter->rx_ring[0];
 		adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
 	}
 }
@@ -3583,8 +3585,8 @@ e1000_clean_rx_irq(struct e1000_adapter 
 	rx_desc = E1000_RX_DESC(*rx_ring, i);
 
 	while(rx_desc->status & E1000_RXD_STAT_DD) {
-		buffer_info = &rx_ring->buffer_info[i];
 		u8 status;
+		buffer_info = &rx_ring->buffer_info[i];
 #ifdef CONFIG_E1000_NAPI
 		if(*work_done >= work_to_do)
 			break;

-- 
Jens Axboe