[PATCH 0/11] sh cleanups

[PATCH 0/11] sh cleanups

[Paul Mundt]

This is a relatively small patch set for cleaning up some of the sh
code. There's also a board update for some of the recent changes
in here, so the defconfig update for that ends up taking a bit of
space..

Let me know if there's something you want dropped, otherwise please
consider for -mm. Against current git.

[PATCH 1/11] sh: SH4-202 microdev updates.

[Paul Mundt]

A few trivial updates for the microdev board support code:

	- Update for __IO_PREFIX changes.
	- Consolidate headers into a single microdev.h.
	- Update the microdev_defconfig.
	- Add init values for the S1D13806 used by s1d13xxxfb.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/boards/superh/microdev/io.c    |  192 +++++++--------
 arch/sh/boards/superh/microdev/irq.c   |    2 
 arch/sh/boards/superh/microdev/setup.c |  168 ++++++++++++-
 arch/sh/configs/microdev_defconfig     |  410 ++++++++++++++++++++------------
 include/asm-sh/microdev.h              |   80 ++++++
 include/asm-sh/microdev/io.h           |   53 ----
 include/asm-sh/microdev/irq.h          |   72 ------
 7 files changed, 583 insertions(+), 394 deletions(-)
 create mode 100644 include/asm-sh/microdev.h
 delete mode 100644 include/asm-sh/microdev/io.h
 delete mode 100644 include/asm-sh/microdev/irq.h

4b4cde7ece5afa9d186ede183d2d865d1cd10758
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index fe83b2c..1ed7f88 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -16,7 +16,7 @@
 #include <linux/pci.h>
 #include <linux/wait.h>
 #include <asm/io.h>
-#include <asm/mach/io.h>
+#include <asm/microdev.h>
 
 	/*
 	 *	we need to have a 'safe' address to re-direct all I/O requests
@@ -52,8 +52,90 @@
 #define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
 #define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
 
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
+/*
+ * map I/O ports to memory-mapped addresses
+ */
+static unsigned long microdev_isa_port2addr(unsigned long offset)
+{
+	unsigned long result;
+
+	if ((offset >= IO_LAN91C111_BASE) &&
+	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+			/*
+			 *	SMSC LAN91C111 Ethernet chip
+			 */
+		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
+	} else if ((offset >= IO_SUPERIO_BASE) &&
+		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Configuration Registers
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+#if 0
+	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
+		   offset == KBD_STATUS_REG) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+#endif
+	} else if (((offset >= IO_IDE1_BASE) &&
+		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE1_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #1
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if (((offset >= IO_IDE2_BASE) &&
+		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE2_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #2
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL1_BASE) &&
+		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #1
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL2_BASE) &&
+		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #2
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_ISP1161_BASE) &&
+		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
+			/*
+			 *	Philips USB ISP1161x chip
+			 */
+		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
+	} else {
+			/*
+			 *	safe default.
+			 */
+		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
+		       __FUNCTION__, offset);
+		result = PVR;
+	}
+
+	return result;
+}
 
+#define PORT2ADDR(x) (microdev_isa_port2addr(x))
 
 static inline void delay(void)
 {
@@ -94,6 +176,17 @@ unsigned int microdev_inl(unsigned long 
 	return *(volatile unsigned int*)PORT2ADDR(port);
 }
 
+void microdev_outw(unsigned short b, unsigned long port)
+{
+#ifdef CONFIG_PCI
+	if (port >= PCIBIOS_MIN_IO) {
+		microdev_pci_outw(b, port);
+		return;
+	}
+#endif
+	*(volatile unsigned short*)PORT2ADDR(port) = b;
+}
+
 void microdev_outb(unsigned char b, unsigned long port)
 {
 #ifdef CONFIG_PCI
@@ -158,17 +251,6 @@ void microdev_outb(unsigned char b, unsi
 	}
 }
 
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outw(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
 void microdev_outl(unsigned int b, unsigned long port)
 {
 #ifdef CONFIG_PCI
@@ -284,87 +366,3 @@ void microdev_outsl(unsigned long port, 
 	while (count--)
 		*port_addr = *buf++;
 }
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-unsigned long microdev_isa_port2addr(unsigned long offset)
-{
-	unsigned long result;
-
-	if ((offset >= IO_LAN91C111_BASE) &&
-	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 *	SMSC LAN91C111 Ethernet chip
-			 */
-		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
-	} else if ((offset >= IO_SUPERIO_BASE) &&
-		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Configuration Registers
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-		   offset == KBD_STATUS_REG) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
-	} else if (((offset >= IO_IDE1_BASE) &&
-		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE1_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #1
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE2_BASE) &&
-		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE2_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #2
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL1_BASE) &&
-		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #1
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL2_BASE) &&
-		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #2
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_ISP1161_BASE) &&
-		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
-			/*
-			 *	Philips USB ISP1161x chip
-			 */
-		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
-	} else {
-			/*
-			 *	safe default.
-			 */
-		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __FUNCTION__, offset);
-		result = PVR;
-	}
-
-	return result;
-}
-
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 1395c1e..efcbd86 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -15,7 +15,7 @@
 
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/mach/irq.h>
+#include <asm/microdev.h>
 
 #define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
 
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 1c1d65f..bf0b381 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
  * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004, 2005 Paul Mundt
  *
  * SuperH SH4-202 MicroDev board support.
  *
@@ -15,11 +15,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
+#include <video/s1d13xxxfb.h>
+#include <asm/microdev.h>
 #include <asm/io.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/io.h>
 #include <asm/machvec.h>
-#include <asm/machvec_init.h>
 
 extern void microdev_heartbeat(void);
 
@@ -51,8 +50,6 @@ struct sh_machine_vector mv_sh4202_micro
 	.mv_outsw		= microdev_outsw,
 	.mv_outsl		= microdev_outsl,
 
-	.mv_isa_port2addr	= microdev_isa_port2addr,
-
 	.mv_init_irq		= init_microdev_irq,
 
 #ifdef CONFIG_HEARTBEAT
@@ -142,16 +139,161 @@ static struct platform_device smc91x_dev
 	.resource	= smc91x_resources,
 };
 
-static int __init smc91x_setup(void)
+#ifdef CONFIG_FB_S1D13XXX
+static struct s1d13xxxfb_regval s1d13806_initregs[] = {
+	{ S1DREG_MISC,			0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x00 },
+	{ S1DREG_GPIO_CNF0,		0x00 },
+	{ S1DREG_GPIO_CNF1,		0x00 },
+	{ S1DREG_GPIO_CTL0,		0x00 },
+	{ S1DREG_GPIO_CTL1,		0x00 },
+	{ S1DREG_CLK_CNF,		0x02 },
+	{ S1DREG_LCD_CLK_CNF,		0x01 },
+	{ S1DREG_CRT_CLK_CNF,		0x03 },
+	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
+	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
+	{ S1DREG_SDRAM_REF_RATE,	0x03 },
+	{ S1DREG_SDRAM_TC0,		0x00 },
+	{ S1DREG_SDRAM_TC1,		0x01 },
+	{ S1DREG_MEM_CNF,		0x80 },
+	{ S1DREG_PANEL_TYPE,		0x25 },
+	{ S1DREG_MOD_RATE,		0x00 },
+	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
+	{ S1DREG_LCD_NDISP_HPER,	0x1e },
+	{ S1DREG_TFT_FPLINE_START,	0x06 },
+	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
+	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_LCD_NDISP_VPER,	0x00 },
+	{ S1DREG_TFT_FPFRAME_START,	0x0a },
+	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
+	{ S1DREG_LCD_DISP_MODE,		0x03 },
+	{ S1DREG_LCD_MISC,		0x00 },
+	{ S1DREG_LCD_DISP_START0,	0x00 },
+	{ S1DREG_LCD_DISP_START1,	0x00 },
+	{ S1DREG_LCD_DISP_START2,	0x00 },
+	{ S1DREG_LCD_MEM_OFF0,		0x90 },
+	{ S1DREG_LCD_MEM_OFF1,		0x01 },
+	{ S1DREG_LCD_PIX_PAN,		0x00 },
+	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
+	{ S1DREG_CRT_NDISP_HPER,	0x1f },
+	{ S1DREG_CRT_HRTC_START,	0x04 },
+	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
+	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_CRT_NDISP_VPER,	0x1b },
+	{ S1DREG_CRT_VRTC_START,	0x00 },
+	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
+	{ S1DREG_TV_OUT_CTL,		0x10 },
+	{ S1DREG_CRT_DISP_MODE,		0x05 },
+	{ S1DREG_CRT_DISP_START0,	0x00 },
+	{ S1DREG_CRT_DISP_START1,	0x00 },
+	{ S1DREG_CRT_DISP_START2,	0x00 },
+	{ S1DREG_CRT_MEM_OFF0,		0x20 },
+	{ S1DREG_CRT_MEM_OFF1,		0x03 },
+	{ S1DREG_CRT_PIX_PAN,		0x00 },
+	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_LCD_CUR_CTL,		0x00 },
+	{ S1DREG_LCD_CUR_START,		0x01 },
+	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
+	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_CUR_CTL,		0x00 },
+	{ S1DREG_CRT_CUR_START,		0x01 },
+	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
+	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_BBLT_CTL0,		0x00 },
+	{ S1DREG_BBLT_CTL1,		0x00 },
+	{ S1DREG_BBLT_CC_EXP,		0x00 },
+	{ S1DREG_BBLT_OP,		0x00 },
+	{ S1DREG_BBLT_SRC_START0,	0x00 },
+	{ S1DREG_BBLT_SRC_START1,	0x00 },
+	{ S1DREG_BBLT_SRC_START2,	0x00 },
+	{ S1DREG_BBLT_DST_START0,	0x00 },
+	{ S1DREG_BBLT_DST_START1,	0x00 },
+	{ S1DREG_BBLT_DST_START2,	0x00 },
+	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
+	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
+	{ S1DREG_BBLT_WIDTH0,		0x00 },
+	{ S1DREG_BBLT_WIDTH1,		0x00 },
+	{ S1DREG_BBLT_HEIGHT0,		0x00 },
+	{ S1DREG_BBLT_HEIGHT1,		0x00 },
+	{ S1DREG_BBLT_BGC0,		0x00 },
+	{ S1DREG_BBLT_BGC1,		0x00 },
+	{ S1DREG_BBLT_FGC0,		0x00 },
+	{ S1DREG_BBLT_FGC1,		0x00 },
+	{ S1DREG_LKUP_MODE,		0x00 },
+	{ S1DREG_LKUP_ADDR,		0x00 },
+	{ S1DREG_PS_CNF,		0x10 },
+	{ S1DREG_PS_STATUS,		0x00 },
+	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x02 },
+};
+
+static struct s1d13xxxfb_pdata s1d13806_platform_data = {
+	.initregs	= s1d13806_initregs,
+	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
+};
+
+static struct resource s1d13806_resources[] = {
+	[0] = {
+		.start		= 0x07200000,
+		.end		= 0x07200000 + 0x00200000 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0x07000000,
+		.end		= 0x07000000 + 0x00200000 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device s1d13806_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s1d13806_resources),
+	.resource	= s1d13806_resources,
+
+	.dev = {
+		.platform_data	= &s1d13806_platform_data,
+	},
+};
+#endif
+
+static struct platform_device *microdev_devices[] __initdata = {
+	&smc91x_device,
+#ifdef CONFIG_FB_S1D13XXX
+	&s1d13806_device,
+#endif
+};
+
+static int __init microdev_devices_setup(void)
 {
-	return platform_device_register(&smc91x_device);
+	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
 }
 
-__initcall(smc91x_setup);
+__initcall(microdev_devices_setup);
 
-	/*
-	 * Initialize the board
-	 */
 void __init platform_setup(void)
 {
 	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
@@ -256,7 +398,7 @@ static int __init smsc_superio_setup(voi
 		/* enable the appropriate GPIO pins for IDE functionality:
 		 * bit[0]   In/Out		1==input;  0==output
 		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
+		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable 
 		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
 		 */
 	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index a3bd280..ab3db76 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,10 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-sh
-# Wed Mar  2 15:09:41 2005
+# Linux kernel version: 2.6.16-rc1
+# Fri Jan 27 19:43:20 2006
 #
 CONFIG_SUPERH=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -17,11 +16,13 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -29,22 +30,29 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -52,6 +60,24 @@ CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_MODULES is not set
 
 #
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System type
 #
 # CONFIG_SH_SOLUTION_ENGINE is not set
@@ -61,9 +87,7 @@ CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_SH_7751_SYSTEMH is not set
 # CONFIG_SH_STB1_HARP is not set
 # CONFIG_SH_STB1_OVERDRIVE is not set
-# CONFIG_SH_HP620 is not set
-# CONFIG_SH_HP680 is not set
-# CONFIG_SH_HP690 is not set
+# CONFIG_SH_HP6XX is not set
 # CONFIG_SH_CQREEK is not set
 # CONFIG_SH_DMIDA is not set
 # CONFIG_SH_EC3104 is not set
@@ -78,45 +102,94 @@ CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_SH_SECUREEDGE5410 is not set
 # CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
 # CONFIG_SH_EDOSK7705 is not set
 CONFIG_SH_SH4202_MICRODEV=y
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
 # CONFIG_SH_UNKNOWN is not set
-# CONFIG_CPU_SH2 is not set
-# CONFIG_CPU_SH3 is not set
+
+#
+# Processor selection
+#
 CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
 # CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
 # CONFIG_CPU_SUBTYPE_SH7300 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
 # CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+CONFIG_CPU_SUBTYPE_SH4_202=y
+
+#
+# ST40 Processor Support
+#
 # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
 # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
 CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200"
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_MEMORY_SET=y
-# CONFIG_MEMORY_OVERRIDE is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_RTC=y
 CONFIG_SH_FPU=y
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_PREEMPT=y
-# CONFIG_UBC_WAKEUP is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
 # CONFIG_SH_STORE_QUEUES is not set
-# CONFIG_SMP is not set
-CONFIG_SH_PCLK_CALC=y
-CONFIG_SH_PCLK_FREQ=65986048
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=66000000
 
 #
 # CPU Frequency scaling
@@ -137,20 +210,31 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 CONFIG_HEARTBEAT=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+# Kernel features
 #
-CONFIG_ISA=y
-# CONFIG_PCI is not set
+# CONFIG_KEXEC is not set
+CONFIG_PREEMPT=y
+# CONFIG_SMP is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# Boot options
 #
-# CONFIG_PCCARD is not set
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
-# PC-card bridges
+# Bus options
 #
-CONFIG_PCMCIA_PROBE=y
+# CONFIG_SUPERHYWAY is not set
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -164,9 +248,79 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
 #
-# SH initrd options
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
 #
-# CONFIG_EMBEDDED_RAMDISK is not set
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -180,6 +334,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 # CONFIG_MTD is not set
@@ -192,13 +351,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -206,17 +362,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -241,9 +387,7 @@ CONFIG_BLK_DEV_IDECD=y
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
-CONFIG_IDE_SH=y
 # CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -251,14 +395,10 @@ CONFIG_IDE_SH=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -266,6 +406,7 @@ CONFIG_IDE_SH=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -276,69 +417,8 @@ CONFIG_IDE_SH=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -346,9 +426,9 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
-# ARCnet devices
+# PHY device support
 #
-# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -356,17 +436,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_STNIC is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -379,7 +449,6 @@ CONFIG_SMC91X=y
 #
 # Token Ring devices
 #
-# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -394,6 +463,8 @@ CONFIG_SMC91X=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -411,20 +482,10 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT is not set
 
 #
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
+# Hardware I/O ports
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 # CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
+# CONFIG_GAMEPORT is not set
 
 #
 # Character devices
@@ -464,24 +525,46 @@ CONFIG_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -508,7 +591,7 @@ CONFIG_RTC=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
@@ -524,13 +607,21 @@ CONFIG_RTC=y
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -540,17 +631,17 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -574,16 +665,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -607,12 +694,14 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -622,6 +711,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -681,8 +771,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_PREEMPT=y
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -706,6 +798,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -730,5 +823,6 @@ CONFIG_CRYPTO_DES=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h
new file mode 100644
index 0000000..018332a
--- /dev/null
+++ b/include/asm-sh/microdev.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA.  should be noted that there
+ * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts.  i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#if defined(CONFIG_PCI)
+unsigned char  microdev_pci_inb(unsigned long port);
+unsigned short microdev_pci_inw(unsigned long port);
+unsigned long  microdev_pci_inl(unsigned long port);
+void           microdev_pci_outb(unsigned char  data, unsigned long port);
+void           microdev_pci_outw(unsigned short data, unsigned long port);
+void           microdev_pci_outl(unsigned long  data, unsigned long port);
+#endif
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/include/asm-sh/microdev/io.h b/include/asm-sh/microdev/io.h
deleted file mode 100644
index f2ca4ac..0000000
--- a/include/asm-sh/microdev/io.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-sh/io_microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * IO functions for the SuperH SH4-202 MicroDev board.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-
-#ifndef _ASM_SH_IO_MICRODEV_H
-#define _ASM_SH_IO_MICRODEV_H
-
-extern unsigned long microdev_isa_port2addr(unsigned long offset);
-
-extern unsigned char microdev_inb(unsigned long port);
-extern unsigned short microdev_inw(unsigned long port);
-extern unsigned int microdev_inl(unsigned long port);
-
-extern void microdev_outb(unsigned char value, unsigned long port);
-extern void microdev_outw(unsigned short value, unsigned long port);
-extern void microdev_outl(unsigned int value, unsigned long port);
-
-extern unsigned char microdev_inb_p(unsigned long port);
-extern unsigned short microdev_inw_p(unsigned long port);
-extern unsigned int microdev_inl_p(unsigned long port);
-
-extern void microdev_outb_p(unsigned char value, unsigned long port);
-extern void microdev_outw_p(unsigned short value, unsigned long port);
-extern void microdev_outl_p(unsigned int value, unsigned long port);
-
-extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
-extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
-extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
-
-extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
-
-#if defined(CONFIG_PCI)
-extern unsigned char  microdev_pci_inb(unsigned long port);
-extern unsigned short microdev_pci_inw(unsigned long port);
-extern unsigned long  microdev_pci_inl(unsigned long port);
-extern void           microdev_pci_outb(unsigned char  data, unsigned long port);
-extern void           microdev_pci_outw(unsigned short data, unsigned long port);
-extern void           microdev_pci_outl(unsigned long  data, unsigned long port);
-#endif
-
-#endif /* _ASM_SH_IO_MICRODEV_H */
-
diff --git a/include/asm-sh/microdev/irq.h b/include/asm-sh/microdev/irq.h
deleted file mode 100644
index 47f6f77..0000000
--- a/include/asm-sh/microdev/irq.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * linux/include/asm-sh/irq_microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * IRQ functions for the SuperH SH4-202 MicroDev board.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-
-#ifndef _ASM_SH_IRQ_MICRODEV_H
-#define _ASM_SH_IRQ_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-
-	/*
-	 *	The following are useful macros for manipulating the
-	 *	interrupt controller (INTC) on the CPU-board FPGA.
-	 *	It should be noted that there is an INTC on the FPGA,
-	 *	and a seperate INTC on the SH4-202 core - these are
-	 *	two different things, both of which need to be prorammed
-	 *	to correctly route - unfortunately, they have the
-	 *	same name and abbreviations!
-	 */
-#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interupt mask to enable/disable INTC in CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-	/*
-	 *	The following are the IRQ numbers for the Linux Kernel for external interrupts.
-	 *	i.e. the numbers seen by 'cat /proc/interrupt'.
-	 */
-#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
-
-	/*
-	 *	The following are the IRQ numbers for the INTC on the FPGA for external interrupts.
-	 *	i.e. the bits in the INTC registers in the FPGA.
-	 */
-#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA		 8
-#define MICRODEV_IRQ_PCI_INTB		 9
-#define MICRODEV_IRQ_PCI_INTC		10
-#define MICRODEV_IRQ_PCI_INTD		11
-
-#endif /* _ASM_SH_IRQ_MICRODEV_H */

[PATCH 2/11] sh: Make peripheral clock frequency setting mandatory.

[Paul Mundt]

Pretty much every subtype does this now anyways, and as we depend
on it in a few places being set to something sensible quite early
on, it's better for a new subtype to simply set a sensible default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/Kconfig            |    6 ------
 arch/sh/kernel/cpu/clock.c |   13 +------------
 2 files changed, 1 insertions(+), 18 deletions(-)

e3efa1355438864fd56f850604722dc62d2aaa1b
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 01bc7d5..504d56f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -396,14 +396,8 @@ source "arch/sh/boards/renesas/hs7751rvo
 
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 
-config SH_PCLK_FREQ_BOOL
-	bool "Set default pclk frequency"
-	default y if !SH_RTC
-	default n
-
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
-	depends on SH_PCLK_FREQ_BOOL
 	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
 	default "60000000" if CPU_SUBTYPE_SH7751
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 989e7fd..97fa37f 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -38,9 +38,7 @@ static DECLARE_MUTEX(clock_list_sem);
 static struct clk master_clk = {
 	.name		= "master_clk",
 	.flags		= CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-#ifdef CONFIG_SH_PCLK_FREQ_BOOL
 	.rate		= CONFIG_SH_PCLK_FREQ,
-#endif
 };
 
 static struct clk module_clk = {
@@ -227,16 +225,7 @@ int __init clk_init(void)
 {
 	int i, ret = 0;
 
-	if (unlikely(!master_clk.rate))
-		/*
-		 * NOTE: This will break if the default divisor has been
-		 * changed.
-		 *
-		 * No one should be changing the default on us however,
-		 * expect that a sane value for CONFIG_SH_PCLK_FREQ will
-		 * be defined in the event of a different divisor.
-		 */
-		master_clk.rate = get_timer_frequency() * 4;
+	BUG_ON(unlikely(!master_clk.rate));
 
 	for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
 		struct clk *clk = onchip_clocks[i];

Re: [PATCH 2/11] sh: Make peripheral clock frequency setting mandatory.

[Andrew Morton]

Paul Mundt <lethal@linux-sh.org> wrote:
>
> +	BUG_ON(unlikely(!master_clk.rate));

BUG_ON() already does unlikely().

[PATCH 3/11] sh: Move TRA/EXPEVT/INTEVT definitions for reuse.

[Paul Mundt]

Currently entry.S is home to these definitions, so we move them
somewhere more sensible. IPR IRQ handling depends on being to
read from INTEVT.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/kernel/entry.S               |   18 +-----------------
 include/asm-sh/cpu-sh3/mmu_context.h |   10 ++++++++++
 include/asm-sh/cpu-sh4/mmu_context.h |    8 ++++++++
 3 files changed, 19 insertions(+), 17 deletions(-)

93492826e1280557092be3ecd5159d85cc4f6e31
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S
index fb63681..a440d36 100644
--- a/arch/sh/kernel/entry.S
+++ b/arch/sh/kernel/entry.S
@@ -16,6 +16,7 @@
 #include <linux/config.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
+#include <asm/cpu/mmu_context.h>
 #include <asm/unistd.h>
 
 #if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
@@ -75,23 +76,6 @@
 ENOSYS = 38
 EINVAL = 22
 
-#if defined(CONFIG_CPU_SH3)
-TRA     = 0xffffffd0
-EXPEVT  = 0xffffffd4
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-INTEVT  = 0xa4000000		! INTEVTE2(0xa4000000)
-#else
-INTEVT  = 0xffffffd8
-#endif
-MMU_TEA = 0xfffffffc		! TLB Exception Address Register
-#elif defined(CONFIG_CPU_SH4)
-TRA     = 0xff000020
-EXPEVT  = 0xff000024
-INTEVT  = 0xff000028
-MMU_TEA = 0xff00000c		! TLB Exception Address Register
-#endif
-
 #if defined(CONFIG_KGDB_NMI)
 NMI_VEC = 0x1c0			! Must catch early for debounce
 #endif
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
index 5cfaa6b..a844ea0 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -24,5 +24,15 @@
 #define MMU_NTLB_WAYS		4
 #define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
 
+#define TRA	0xffffffd0
+#define EXPEVT	0xffffffd4
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
+#else
+#define INTEVT	0xffffffd8
+#endif
+
 #endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
 
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h
index 5b64d04..ff4c5fb 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/include/asm-sh/cpu-sh4/mmu_context.h
@@ -23,7 +23,11 @@
 #define MMU_PAGE_ASSOC_BIT	0x80
 
 #define MMU_NTLB_ENTRIES	64	/* for 7750 */
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMU_CONTROL_INIT	0x05	/* SQMD=0, SV=0, TI=1, AT=1 */
+#else
 #define MMU_CONTROL_INIT	0x205	/* SQMD=1, SV=0, TI=1, AT=1 */
+#endif
 
 #define MMU_ITLB_DATA_ARRAY	0xF3000000
 #define MMU_UTLB_DATA_ARRAY	0xF7000000
@@ -35,5 +39,9 @@
 #define MMU_I_ENTRY_SHIFT	    8
 #define MMU_ITLB_VALID		0x100
 
+#define TRA	0xff000020
+#define EXPEVT	0xff000024
+#define INTEVT	0xff000028
+
 #endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
 

[PATCH 4/11] sh: Cleanup struct sh_cpuinfo for clock framework changes.

[Paul Mundt]

Now that the clock framework changes have been integrated, the manual
clock accounting that was done in sh_cpuinfo can be dropped.

Also correct a bug with running past the end of the CPU flags when
there's a mismatch between the added flags and printed ones.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/kernel/setup.c     |   38 +++++++++++++++-----------------------
 include/asm-sh/processor.h |   36 +++++++++++++++---------------------
 2 files changed, 30 insertions(+), 44 deletions(-)

3e717e73a0c3ab7cbb26725b39b5ab1429cae266
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 036050b..0f1fbe7 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -22,10 +22,10 @@
 #include <linux/cpu.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/io_generic.h>
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
+#include <asm/clock.h>
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
@@ -41,7 +41,7 @@ extern void * __rd_start, * __rd_end;
  * This value will be used at the very early stage of serial setup.
  * The bigger value means no problem.
  */
-struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 0, 10000000, };
+struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
 struct screen_info screen_info;
 
 #if defined(CONFIG_SH_UNKNOWN)
@@ -273,10 +273,10 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = (unsigned long) _end;
 
-	code_resource.start = virt_to_bus(_text);
-	code_resource.end = virt_to_bus(_etext)-1;
-	data_resource.start = virt_to_bus(_etext);
-	data_resource.end = virt_to_bus(_edata)-1;
+	code_resource.start = (unsigned long)virt_to_phys(_text);
+	code_resource.end = (unsigned long)virt_to_phys(_etext)-1;
+	data_resource.start = (unsigned long)virt_to_phys(_etext);
+	data_resource.end = (unsigned long)virt_to_phys(_edata)-1;
 
 	sh_mv_setup(cmdline_p);
 
@@ -435,6 +435,9 @@ static const char *cpu_name[] = {
 	[CPU_ST40GX1]	= "ST40GX1",
 	[CPU_SH4_202]	= "SH4-202",
 	[CPU_SH4_501]	= "SH4-501",
+	[CPU_SH7770]	= "SH7770",
+	[CPU_SH7780]	= "SH7780",
+	[CPU_SH7781]	= "SH7781",
 	[CPU_SH_NONE]	= "Unknown"
 };
 
@@ -445,7 +448,7 @@ const char *get_cpu_subtype(void)
 
 #ifdef CONFIG_PROC_FS
 static const char *cpu_flags[] = {
-	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL
 };
 
 static void show_cpuflags(struct seq_file *m)
@@ -459,7 +462,7 @@ static void show_cpuflags(struct seq_fil
 		return;
 	}
 
-	for (i = 0; i < cpu_data->flags; i++)
+	for (i = 0; cpu_flags[i]; i++)
 		if ((cpu_data->flags & (1 << i)))
 			seq_printf(m, " %s", cpu_flags[i+1]);
 
@@ -472,7 +475,8 @@ static void show_cacheinfo(struct seq_fi
 
 	cache_size = info.ways * info.sets * info.linesz;
 
-	seq_printf(m, "%s size\t: %dKiB\n", type, cache_size >> 10);
+	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
+		   type, cache_size >> 10, info.ways);
 }
 
 /*
@@ -511,21 +515,9 @@ static int show_cpuinfo(struct seq_file 
 		     boot_cpu_data.loops_per_jiffy/(500000/HZ),
 		     (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);
 
-#define PRINT_CLOCK(name, value) \
-	seq_printf(m, name " clock\t: %d.%02dMHz\n", \
-		     ((value) / 1000000), ((value) % 1000000)/10000)
-	
-	PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
-	PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-	PRINT_CLOCK("memory", boot_cpu_data.memory_clock);
-#endif
-	PRINT_CLOCK("module", boot_cpu_data.module_clock);
-
-	return 0;
+	return show_clocks(m);
 }
 
-
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
@@ -596,7 +588,7 @@ static int __init kgdb_parse_options(cha
 		options += map->namelen + 1;
 
 		options = (*options == ',') ? options+1 : options;
-		
+
 		/* Read optional parameters (baud/parity/bits) */
 		baud = simple_strtoul(options, &options, 10);
 		if (baud != 0) {
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index c490479..fa5bd2d 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -12,7 +12,6 @@
 #include <asm/page.h>
 #include <asm/types.h>
 #include <asm/cache.h>
-#include <linux/threads.h>
 #include <asm/ptrace.h>
 
 /*
@@ -30,7 +29,7 @@
  *  CPU type and hardware bug flags. Kept separately for each CPU.
  *
  *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- *  in arch/sh/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
  *  for parsing the subtype in get_cpu_subtype().
  */
 enum cpu_type {
@@ -44,7 +43,7 @@ enum cpu_type {
 	/* SH-4 types */
 	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
 	CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
-	CPU_SH73180,
+	CPU_SH73180, CPU_SH7770, CPU_SH7780, CPU_SH7781,
 
 	/* Unknown subtype */
 	CPU_SH_NONE
@@ -52,14 +51,8 @@ enum cpu_type {
 
 struct sh_cpuinfo {
 	enum cpu_type type;
-	char	hard_math;
 	unsigned long loops_per_jiffy;
 
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-	unsigned int memory_clock;
-#endif
-
 	struct cache_info icache;
 	struct cache_info dcache;
 
@@ -131,7 +124,7 @@ union sh_fpu_union {
 	struct sh_fpu_soft_struct soft;
 };
 
-/* 
+/*
  * Processor flags
  */
 
@@ -140,6 +133,7 @@ union sh_fpu_union {
 #define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
 #define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
 #define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
+#define CPU_HAS_PTEA		0x0020	/* PTEA register */
 
 struct thread_struct {
 	unsigned long sp;
@@ -160,10 +154,10 @@ extern int ubc_usercnt;
 #define INIT_THREAD  {						\
 	sizeof(init_stack) + (long) &init_stack, /* sp */	\
 	0,					 /* pc */	\
-	0, 0, 							\
-	0, 							\
-	0, 							\
-	{{{0,}},} 				/* fpu state */	\
+	0, 0,							\
+	0,							\
+	0,							\
+	{{{0,}},}				/* fpu state */	\
 }
 
 /*
@@ -171,7 +165,7 @@ extern int ubc_usercnt;
  */
 #define start_thread(regs, new_pc, new_sp)	 \
 	set_fs(USER_DS);			 \
-	regs->pr = 0;   		 	 \
+	regs->pr = 0;				 \
 	regs->sr = SR_FD;	/* User mode. */ \
 	regs->pc = new_pc;			 \
 	regs->regs[15] = new_sp
@@ -239,16 +233,16 @@ extern void save_fpu(struct task_struct 
 #define save_fpu(tsk)	do { } while (0)
 #endif
 
-#define unlazy_fpu(tsk, regs) do { 				\
+#define unlazy_fpu(tsk, regs) do {			\
 	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {	\
-		save_fpu(tsk, regs); 				\
+		save_fpu(tsk, regs);			\
 	}						\
 } while (0)
 
-#define clear_fpu(tsk, regs) do { 					\
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { 		\
-		clear_tsk_thread_flag(tsk, TIF_USEDFPU); 	\
-		release_fpu(regs);					\
+#define clear_fpu(tsk, regs) do {				\
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {		\
+		clear_tsk_thread_flag(tsk, TIF_USEDFPU);	\
+		release_fpu(regs);				\
 	}							\
 } while (0)
 

[PATCH 5/11] sh: unknown mach-type updates.

[Paul Mundt]

Trivial cleanup of the unknown machine type for some of the
recent machvec changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/boards/unknown/Makefile |    2 +
 arch/sh/boards/unknown/io.c     |   46 ---------------------------
 arch/sh/boards/unknown/mach.c   |   67 ---------------------------------------
 arch/sh/boards/unknown/setup.c  |   12 ++++++-
 arch/sh/kernel/setup.c          |   13 ++------
 5 files changed, 16 insertions(+), 124 deletions(-)
 delete mode 100644 arch/sh/boards/unknown/io.c
 delete mode 100644 arch/sh/boards/unknown/mach.c

eaa4999ab033f852a67796317073a2d14f31c04d
diff --git a/arch/sh/boards/unknown/Makefile b/arch/sh/boards/unknown/Makefile
index cffc210..7d18f40 100644
--- a/arch/sh/boards/unknown/Makefile
+++ b/arch/sh/boards/unknown/Makefile
@@ -2,5 +2,5 @@
 # Makefile for unknown SH boards 
 #
 
-obj-y	 := mach.o io.o setup.o
+obj-y	 := setup.o
 
diff --git a/arch/sh/boards/unknown/io.c b/arch/sh/boards/unknown/io.c
deleted file mode 100644
index 8f3f172..0000000
--- a/arch/sh/boards/unknown/io.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/kernel/io_unknown.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * I/O routine for unknown hardware.
- */
-
-static unsigned int unknown_handler(void)
-{
-	return 0;
-}
-
-#define UNKNOWN_ALIAS(fn) \
-	void unknown_##fn(void) __attribute__ ((alias ("unknown_handler")));
-
-UNKNOWN_ALIAS(inb)
-UNKNOWN_ALIAS(inw)
-UNKNOWN_ALIAS(inl)
-UNKNOWN_ALIAS(outb)
-UNKNOWN_ALIAS(outw)
-UNKNOWN_ALIAS(outl)
-UNKNOWN_ALIAS(inb_p)
-UNKNOWN_ALIAS(inw_p)
-UNKNOWN_ALIAS(inl_p)
-UNKNOWN_ALIAS(outb_p)
-UNKNOWN_ALIAS(outw_p)
-UNKNOWN_ALIAS(outl_p)
-UNKNOWN_ALIAS(insb)
-UNKNOWN_ALIAS(insw)
-UNKNOWN_ALIAS(insl)
-UNKNOWN_ALIAS(outsb)
-UNKNOWN_ALIAS(outsw)
-UNKNOWN_ALIAS(outsl)
-UNKNOWN_ALIAS(readb)
-UNKNOWN_ALIAS(readw)
-UNKNOWN_ALIAS(readl)
-UNKNOWN_ALIAS(writeb)
-UNKNOWN_ALIAS(writew)
-UNKNOWN_ALIAS(writel)
-UNKNOWN_ALIAS(isa_port2addr)
-UNKNOWN_ALIAS(ioremap)
-UNKNOWN_ALIAS(iounmap)
diff --git a/arch/sh/boards/unknown/mach.c b/arch/sh/boards/unknown/mach.c
deleted file mode 100644
index ad0bcc6..0000000
--- a/arch/sh/boards/unknown/mach.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_unknown.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine specific code for an unknown machine (internal peripherials only)
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io_unknown.h>
-
-#include <asm/rtc.h>
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_unknown __initmv = {
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#endif
-
-	.mv_inb			= unknown_inb,
-	.mv_inw			= unknown_inw,
-	.mv_inl			= unknown_inl,
-	.mv_outb		= unknown_outb,
-	.mv_outw		= unknown_outw,
-	.mv_outl		= unknown_outl,
-
-	.mv_inb_p		= unknown_inb_p,
-	.mv_inw_p		= unknown_inw_p,
-	.mv_inl_p		= unknown_inl_p,
-	.mv_outb_p		= unknown_outb_p,
-	.mv_outw_p		= unknown_outw_p,
-	.mv_outl_p		= unknown_outl_p,
-
-	.mv_insb		= unknown_insb,
-	.mv_insw		= unknown_insw,
-	.mv_insl		= unknown_insl,
-	.mv_outsb		= unknown_outsb,
-	.mv_outsw		= unknown_outsw,
-	.mv_outsl		= unknown_outsl,
-
-	.mv_readb		= unknown_readb,
-	.mv_readw		= unknown_readw,
-	.mv_readl		= unknown_readl,
-	.mv_writeb		= unknown_writeb,
-	.mv_writew		= unknown_writew,
-	.mv_writel		= unknown_writel,
-
-	.mv_ioremap		= unknown_ioremap,
-	.mv_iounmap		= unknown_iounmap,
-
-	.mv_isa_port2addr	= unknown_isa_port2addr,
-};
-ALIAS_MV(unknown)
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index 7d772a6..02e84f0 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -7,10 +7,20 @@
  * License.  See linux/COPYING for more information.
  *
  * Setup code for an unknown machine (internal peripherials only)
+ *
+ * This is the simplest of all boards, and serves only as a quick and dirty
+ * method to start debugging a new board during bring-up until proper board
+ * setup code is written.
  */
-
 #include <linux/config.h>
 #include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/irq.h>
+
+struct sh_machine_vector mv_unknown __initmv = {
+	.mv_nr_irqs		= NR_IRQS,
+};
+ALIAS_MV(unknown)
 
 const char *get_system_type(void)
 {
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 0f1fbe7..a067a34 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -186,7 +186,7 @@ static inline void parse_cmdline (char *
 
 static int __init sh_mv_setup(char **cmdline_p)
 {
-#if defined(CONFIG_SH_UNKNOWN)
+#ifdef CONFIG_SH_UNKNOWN
 	extern struct sh_machine_vector mv_unknown;
 #endif
 	struct sh_machine_vector *mv = NULL;
@@ -196,7 +196,7 @@ static int __init sh_mv_setup(char **cmd
 
 	parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable);
 
-#ifdef CONFIG_SH_GENERIC
+#ifdef CONFIG_SH_UNKNOWN
 	if (mv == NULL) {
 		mv = &mv_unknown;
 		if (*mv_name != '\0') {
@@ -206,9 +206,6 @@ static int __init sh_mv_setup(char **cmd
 	}
 	sh_mv = *mv;
 #endif
-#ifdef CONFIG_SH_UNKNOWN
-	sh_mv = mv_unknown;
-#endif
 
 	/*
 	 * Manually walk the vec, fill in anything that the board hasn't yet
@@ -231,10 +228,8 @@ static int __init sh_mv_setup(char **cmd
 	mv_set(readb);	mv_set(readw);	mv_set(readl);
 	mv_set(writeb);	mv_set(writew);	mv_set(writel);
 
-	mv_set(ioremap);
-	mv_set(iounmap);
-
-	mv_set(isa_port2addr);
+	mv_set(ioport_map);
+	mv_set(ioport_unmap);
 	mv_set(irq_demux);
 
 #ifdef CONFIG_SH_UNKNOWN

[PATCH 6/11] sh: drop maskpos from make_ipr_irq(), remove duplicate irq definitions.

[Paul Mundt]

Clean up some of the subtype IRQ definitions for IPR IRQ, and
consolidate the make_ipr_irq() definitions by dropping maskpos.
SH-4A was the only thing interested in the maskpos, and this
should be handled through INTC2 rather than IPR.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/kernel/cpu/irq/ipr.c |   59 +++++++++++++++++++++---------------------
 include/asm-sh/irq-sh73180.h |   36 +-------------------------
 include/asm-sh/irq-sh7780.h  |   23 ----------------
 include/asm-sh/irq.h         |   10 ++++++-
 4 files changed, 38 insertions(+), 90 deletions(-)

f8f931cba083eba8848230eb02d3e815009daec9
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index fdbd718..e55150e 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -108,8 +108,7 @@ static void end_ipr_irq(unsigned int irq
 		enable_ipr_irq(irq);
 }
 
-void make_ipr_irq(unsigned int irq, unsigned int addr, int pos,
-		  int priority, int maskpos)
+void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority)
 {
 	disable_irq_nosync(irq);
 	ipr_data[irq].addr = addr;
@@ -123,44 +122,44 @@ void make_ipr_irq(unsigned int irq, unsi
 void __init init_IRQ(void)
 {
 #ifndef CONFIG_CPU_SUBTYPE_SH7780
-	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0);
-	make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0);
+	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
+	make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
 #if defined(CONFIG_SH_RTC)
-	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0);
+	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
 #endif
 
 #ifdef SCI_ERI_IRQ
-	make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
-	make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
-	make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+	make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+	make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+	make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
 #endif
 
 #ifdef SCIF1_ERI_IRQ
-	make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
-	make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
-	make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
-	make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+	make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7300)
-	make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0);
-	make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
-	make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
-	make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0);
+	make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY);
+	make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
 #endif
 
 #ifdef SCIF_ERI_IRQ
-	make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
-	make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
-	make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
-	make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+	make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+	make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+	make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+	make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
 #endif
 
 #ifdef IRDA_ERI_IRQ
-	make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
-	make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
-	make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
-	make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+	make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+	make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+	make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+	make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
@@ -175,12 +174,12 @@ void __init init_IRQ(void)
 	 * You should set corresponding bits of PFC to "00"
 	 * to enable these interrupts.
 	 */
-	make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0);
-	make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0);
-	make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0);
-	make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0);
-	make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0);
-	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0);
+	make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY);
+	make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
+	make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
+	make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY);
+	make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY);
+	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY);
 #endif
 #endif
 
diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h
index bf2e431..d705252 100644
--- a/include/asm-sh/irq-sh73180.h
+++ b/include/asm-sh/irq-sh73180.h
@@ -25,11 +25,6 @@
 #undef DMA_IPR_POS
 #undef DMA_PRIORITY
 
-#undef NR_IRQS
-
-#undef __irq_demux
-#undef irq_demux
-
 #undef INTC_IMCR0
 #undef INTC_IMCR1
 #undef INTC_IMCR2
@@ -229,33 +224,6 @@
 #define SIU_IPR_POS	1
 #define SIU_PRIORITY	3
 
-
-/* ONCHIP_NR_IRQS */
-#define NR_IRQS 109
-
-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#define ACTUAL_NR_IRQS NR_IRQS
-
-
-extern void disable_irq(unsigned int);
-extern void disable_irq_nosync(unsigned int);
-extern void enable_irq(unsigned int);
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * Function for "on chip support modules".
- */
-extern void make_ipr_irq(unsigned int irq, unsigned int addr,
-			 int pos,  int priority);
-extern void make_imask_irq(unsigned int irq);
-
 #define PORT_PACR	0xA4050100UL
 #define PORT_PBCR	0xA4050102UL
 #define PORT_PCCR	0xA4050104UL
@@ -343,8 +311,6 @@ extern void make_imask_irq(unsigned int 
 #define IRQ6_PRIORITY	1
 #define IRQ7_PRIORITY	1
 
-extern int shmse_irq_demux(int irq);
-#define __irq_demux(irq) shmse_irq_demux(irq)
-#define irq_demux(irq) __irq_demux(irq)
+int shmse_irq_demux(int irq);
 
 #endif /* __ASM_SH_IRQ_SH73180_H */
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
index 8c8ca12..7f90315 100644
--- a/include/asm-sh/irq-sh7780.h
+++ b/include/asm-sh/irq-sh7780.h
@@ -299,29 +299,6 @@
 #define	GPIO_IPR_POS	2
 #define	GPIO_PRIORITY	3
 
-/* ONCHIP_NR_IRQS */
-#define NR_IRQS 150	/* 111 + 16 */
-
-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#define ACTUAL_NR_IRQS NR_IRQS
-
-extern void disable_irq(unsigned int);
-extern void disable_irq_nosync(unsigned int);
-extern void enable_irq(unsigned int);
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * Function for "on chip support modules".
- */
-extern void make_imask_irq(unsigned int irq);
-
 #define	INTC_TMU0_MSK	0
 #define	INTC_TMU3_MSK	1
 #define	INTC_RTC_MSK	2
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 060ec3c..42b8394 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -245,6 +245,7 @@
 #endif /* ST40STB1 */
 
 #endif /* 775x / SH4-202 / ST40STB1 */
+#endif /* 7780 */
 
 /* NR_IRQS is made from three components:
  *   1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
@@ -274,8 +275,11 @@
 # define ONCHIP_NR_IRQS 72
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
 # define ONCHIP_NR_IRQS 144
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+      defined(CONFIG_CPU_SUBTYPE_SH73180)
 # define ONCHIP_NR_IRQS 109
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+# define ONCHIP_NR_IRQS 111
 #elif defined(CONFIG_SH_UNKNOWN)	/* Most be last */
 # define ONCHIP_NR_IRQS 144
 #endif
@@ -306,6 +310,8 @@
 # define OFFCHIP_NR_IRQS 96
 #elif defined (CONFIG_SH_TITAN)
 # define OFFCHIP_NR_IRQS 4
+#elif defined(CONFIG_SH_R7780RP)
+# define OFFCHIP_NR_IRQS 16
 #elif defined(CONFIG_SH_UNKNOWN)
 # define OFFCHIP_NR_IRQS 16	/* Must also be last */
 #else
@@ -550,7 +556,7 @@ extern int ipr_irq_demux(int irq);
 #define INTC_ICR_IRLM	(1<<7)
 #endif
 
-#else
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
 #include <asm/irq-sh7780.h>
 #endif
 

[PATCH 7/11] sh: convert voyagergx to platform device, drop sh-bus.

[Paul Mundt]

Trivial patch updating the voyagergx cchip code to reference a
platform device instead, now that the dma mask is taken care
of. Given this, there's no longer any reason to drag around the
SH-bus code, so kill that off entirely.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/cchips/voyagergx/consistent.c |   15 +--
 arch/sh/cchips/voyagergx/irq.c        |    7 +
 arch/sh/kernel/cpu/Makefile           |    2 
 arch/sh/kernel/cpu/bus.c              |  197 ---------------------------------
 include/asm-sh/bus-sh.h               |   66 -----------
 5 files changed, 12 insertions(+), 275 deletions(-)
 delete mode 100644 arch/sh/kernel/cpu/bus.c
 delete mode 100644 include/asm-sh/bus-sh.h

29a11ff14a7ec1409a7e3e8b62e5830d2dd1f080
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 3d9a02c..07e8b9c 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <asm/io.h>
-#include <asm/bus-sh.h>
+
 
 struct voya_alloc_entry {
 	struct list_head list;
@@ -30,12 +30,13 @@ static LIST_HEAD(voya_alloc_list);
 #define OHCI_HCCA_SIZE	0x100
 #define OHCI_SRAM_SIZE	0x10000
 
+#define VOYAGER_OHCI_NAME	"voyager-ohci"
+
 void *voyagergx_consistent_alloc(struct device *dev, size_t size,
 				 dma_addr_t *handle, gfp_t flag)
 {
 	struct list_head *list = &voya_alloc_list;
 	struct voya_alloc_entry *entry;
-	struct sh_dev *shdev = to_sh_dev(dev);
 	unsigned long start, end;
 	unsigned long flags;
 
@@ -46,9 +47,7 @@ void *voyagergx_consistent_alloc(struct 
 	 *
 	 * Everything else goes through consistent_alloc().
 	 */
-	if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] ||
-		   (dev->bus == &sh_bus_types[SH_BUS_VIRT] &&
-		    shdev->dev_id != SH_DEV_ID_USB_OHCI))
+	if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME))
 		return NULL;
 
 	start = OHCI_SRAM_START + OHCI_HCCA_SIZE;
@@ -98,12 +97,9 @@ int voyagergx_consistent_free(struct dev
 			      void *vaddr, dma_addr_t handle)
 {
 	struct voya_alloc_entry *entry;
-	struct sh_dev *shdev = to_sh_dev(dev);
 	unsigned long flags;
 
-	if (!dev || dev->bus != &sh_bus_types[SH_BUS_VIRT] ||
-		   (dev->bus == &sh_bus_types[SH_BUS_VIRT] &&
-		    shdev->dev_id != SH_DEV_ID_USB_OHCI))
+	if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME))
 		return -EINVAL;
 
 	spin_lock_irqsave(&voya_list_lock, flags);
@@ -123,4 +119,3 @@ int voyagergx_consistent_free(struct dev
 
 EXPORT_SYMBOL(voyagergx_consistent_alloc);
 EXPORT_SYMBOL(voyagergx_consistent_free);
-
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index 1b6ac52..2ee330b 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -163,7 +163,12 @@ int voyagergx_irq_demux(int irq)
 	return irq;
 }
 
-static struct irqaction irq0  = { voyagergx_interrupt, SA_INTERRUPT, 0, "VOYAGERGX", NULL, NULL};
+static struct irqaction irq0  = {
+	.name		= "voyagergx",
+	.handler	= voyagergx_interrupt,
+	.flags		= SA_INTERRUPT,
+	.mask		= CPU_MASK_NONE,
+};
 
 void __init setup_voyagergx_irq(void)
 {
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 5bfc33b..59d5b74 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Linux/SuperH CPU-specifc backends.
 #
 
-obj-y	+= irq/ init.o bus.o clock.o
+obj-y	+= irq/ init.o clock.o
 
 obj-$(CONFIG_CPU_SH2)		+= sh2/
 obj-$(CONFIG_CPU_SH3)		+= sh3/
diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c
deleted file mode 100644
index fc6c4bd..0000000
--- a/arch/sh/kernel/cpu/bus.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/kernel/cpu/bus.c
- *
- * Virtual bus for SuperH.
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * Shamelessly cloned from arch/arm/mach-omap/bus.c, which was written
- * by:
- *
- *  	Copyright (C) 2003 - 2004 Nokia Corporation
- *  	Written by Tony Lindgren <tony@atomide.com>
- *  	Portions of code based on sa1111.c.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <asm/bus-sh.h>
-
-static int sh_bus_match(struct device *dev, struct device_driver *drv)
-{
-	struct sh_driver *shdrv = to_sh_driver(drv);
-	struct sh_dev *shdev = to_sh_dev(dev);
-
-	return shdev->dev_id == shdrv->dev_id;
-}
-
-static int sh_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct sh_dev *shdev = to_sh_dev(dev);
-	struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
-	if (shdrv && shdrv->suspend)
-		return shdrv->suspend(shdev, state);
-
-	return 0;
-}
-
-static int sh_bus_resume(struct device *dev)
-{
-	struct sh_dev *shdev = to_sh_dev(dev);
-	struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
-	if (shdrv && shdrv->resume)
-		return shdrv->resume(shdev);
-
-	return 0;
-}
-
-static int sh_device_probe(struct device *dev)
-{
-	struct sh_dev *shdev = to_sh_dev(dev);
-	struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
-	if (shdrv && shdrv->probe)
-		return shdrv->probe(shdev);
-
-	return -ENODEV;
-}
-
-static int sh_device_remove(struct device *dev)
-{
-	struct sh_dev *shdev = to_sh_dev(dev);
-	struct sh_driver *shdrv = to_sh_driver(dev->driver);
-
-	if (shdrv && shdrv->remove)
-		return shdrv->remove(shdev);
-
-	return 0;
-}
-
-static struct device sh_bus_devices[SH_NR_BUSES] = {
-	{
-		.bus_id		= SH_BUS_NAME_VIRT,
-	},
-};
-
-struct bus_type sh_bus_types[SH_NR_BUSES] = {
-	{
-		.name		= SH_BUS_NAME_VIRT,
-		.match		= sh_bus_match,
-		.probe		= sh_bus_probe,
-		.remove		= sh_bus_remove,
-		.suspend	= sh_bus_suspend,
-		.resume		= sh_bus_resume,
-	},
-};
-
-int sh_device_register(struct sh_dev *dev)
-{
-	if (!dev)
-		return -EINVAL;
-
-	if (dev->bus_id < 0 || dev->bus_id >= SH_NR_BUSES) {
-		printk(KERN_ERR "%s: bus_id invalid: %s bus: %d\n",
-		       __FUNCTION__, dev->name, dev->bus_id);
-		return -EINVAL;
-	}
-
-	dev->dev.parent = &sh_bus_devices[dev->bus_id];
-	dev->dev.bus    = &sh_bus_types[dev->bus_id];
-
-	/* This is needed for USB OHCI to work */
-	if (dev->dma_mask)
-		dev->dev.dma_mask = dev->dma_mask;
-	if (dev->coherent_dma_mask)
-		dev->dev.coherent_dma_mask = dev->coherent_dma_mask;
-
-	snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u",
-		 dev->name, dev->dev_id);
-
-	printk(KERN_INFO "Registering SH device '%s'. Parent at %s\n",
-	       dev->dev.bus_id, dev->dev.parent->bus_id);
-
-	return device_register(&dev->dev);
-}
-
-void sh_device_unregister(struct sh_dev *dev)
-{
-	device_unregister(&dev->dev);
-}
-
-int sh_driver_register(struct sh_driver *drv)
-{
-	if (!drv)
-		return -EINVAL;
-
-	if (drv->bus_id < 0 || drv->bus_id >= SH_NR_BUSES) {
-		printk(KERN_ERR "%s: bus_id invalid: bus: %d device %d\n",
-		       __FUNCTION__, drv->bus_id, drv->dev_id);
-		return -EINVAL;
-	}
-
-	drv->drv.bus    = &sh_bus_types[drv->bus_id];
-
-	return driver_register(&drv->drv);
-}
-
-void sh_driver_unregister(struct sh_driver *drv)
-{
-	driver_unregister(&drv->drv);
-}
-
-static int __init sh_bus_init(void)
-{
-	int i, ret = 0;
-
-	for (i = 0; i < SH_NR_BUSES; i++) {
-		ret = device_register(&sh_bus_devices[i]);
-		if (ret != 0) {
-			printk(KERN_ERR "Unable to register bus device %s\n",
-			       sh_bus_devices[i].bus_id);
-			continue;
-		}
-
-		ret = bus_register(&sh_bus_types[i]);
-		if (ret != 0) {
-			printk(KERN_ERR "Unable to register bus %s\n",
-			       sh_bus_types[i].name);
-			device_unregister(&sh_bus_devices[i]);
-		}
-	}
-
-	printk(KERN_INFO "SH Virtual Bus initialized\n");
-
-	return ret;
-}
-
-static void __exit sh_bus_exit(void)
-{
-	int i;
-
-	for (i = 0; i < SH_NR_BUSES; i++) {
-		bus_unregister(&sh_bus_types[i]);
-		device_unregister(&sh_bus_devices[i]);
-	}
-}
-
-module_init(sh_bus_init);
-module_exit(sh_bus_exit);
-
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
-MODULE_DESCRIPTION("SH Virtual Bus");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sh_bus_types);
-EXPORT_SYMBOL(sh_device_register);
-EXPORT_SYMBOL(sh_device_unregister);
-EXPORT_SYMBOL(sh_driver_register);
-EXPORT_SYMBOL(sh_driver_unregister);
-
diff --git a/include/asm-sh/bus-sh.h b/include/asm-sh/bus-sh.h
deleted file mode 100644
index e42d63b..0000000
--- a/include/asm-sh/bus-sh.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-sh/bus-sh.h
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_BUS_SH_H
-#define __ASM_SH_BUS_SH_H
-
-extern struct bus_type sh_bus_types[];
-
-struct sh_dev {
-	struct device	dev;
-	char		*name;
-	unsigned int	dev_id;
-	unsigned int	bus_id;
-	struct resource	res;
-	void		*mapbase;
-	unsigned int	irq[6];
-	u64		*dma_mask;
-	u64		coherent_dma_mask;
-};
-
-#define to_sh_dev(d)	container_of((d), struct sh_dev, dev)
-
-#define sh_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define sh_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, (p))
-
-struct sh_driver {
-	struct device_driver	drv;
-	unsigned int		dev_id;
-	unsigned int		bus_id;
-	int (*probe)(struct sh_dev *);
-	int (*remove)(struct sh_dev *);
-	int (*suspend)(struct sh_dev *, pm_message_t);
-	int (*resume)(struct sh_dev *);
-};
-
-#define to_sh_driver(d)	container_of((d), struct sh_driver, drv)
-#define sh_name(d)	((d)->dev.driver->name)
-
-/*
- * Device ID numbers for bus types
- */
-enum {
-	SH_DEV_ID_USB_OHCI,
-};
-
-#define SH_NR_BUSES		1
-#define SH_BUS_NAME_VIRT	"shbus"
-
-enum {
-	SH_BUS_VIRT,
-};
-
-/* arch/sh/kernel/cpu/bus.c */
-extern int sh_device_register(struct sh_dev *dev);
-extern void sh_device_unregister(struct sh_dev *dev);
-extern int sh_driver_register(struct sh_driver *drv);
-extern void sh_driver_unregister(struct sh_driver *drv);
-
-#endif /* __ASM_SH_BUS_SH_H */
-

[PATCH 8/11] sh: sh-sci clock framework updates.

[Paul Mundt]

A couple of updates for the sh-sci serial driver:

	- Update for clock framework on sh.
	- Fix a compile error introduced by some h8300 changes.
	- Add SH7770/SH7780 subtype support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 drivers/serial/sh-sci.c |  225 +++++++++++++++++++++++++++++++++---------------
 drivers/serial/sh-sci.h |  114 ++++++++++++++----------
 2 files changed, 223 insertions(+), 116 deletions(-)

da11fe2659737503709e2159a596224b08e002b8
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a9e0707..12f87d2 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/bitops.h>
+#include <linux/generic_serial.h>
 
 #ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
@@ -53,7 +54,9 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-#include <linux/generic_serial.h>
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <asm/clock.h>
+#endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
@@ -86,9 +89,11 @@ static void sci_stop_rx(struct uart_port
 static int sci_request_irq(struct sci_port *port);
 static void sci_free_irq(struct sci_port *port);
 
-static struct sci_port sci_ports[SCI_NPORTS];
+static struct sci_port sci_ports[];
 static struct uart_driver sci_uart_driver;
 
+#define SCI_NPORTS sci_uart_driver.nr
+
 #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
 
 static void handle_error(struct uart_port *port)
@@ -168,7 +173,7 @@ static void put_string(struct sci_port *
 	int usegdb=0;
 
 #ifdef CONFIG_SH_STANDARD_BIOS
-    	/* This call only does a trap the first time it is
+	/* This call only does a trap the first time it is
 	 * called, and so is safe to do here unconditionally
 	 */
 	usegdb |= sh_bios_in_gdb_mode();
@@ -324,47 +329,46 @@ static void sci_init_pins_sci(struct uar
 	/* tx mark output*/
 	H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
 }
-#else
-static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
-{
-}
 #endif
 #endif
 
 #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+/* SH7300 doesn't use RTS/CTS */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	sci_out(port, SCFCR, 0);
+}
+#elif defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
 	unsigned int fcr_val = 0;
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
-	{
-		unsigned short data;
+	unsigned short data;
+
+	/* We need to set SCPCR to enable RTS/CTS */
+	data = ctrl_inw(SCPCR);
+	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+	ctrl_outw(data & 0x0fcf, SCPCR);
 
-		/* We need to set SCPCR to enable RTS/CTS */
-		data = ctrl_inw(SCPCR);
-		/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
-		ctrl_outw(data&0x0fcf, SCPCR);
-	}
 	if (cflag & CRTSCTS)
 		fcr_val |= SCFCR_MCE;
 	else {
-		unsigned short data;
-
 		/* We need to set SCPCR to enable RTS/CTS */
 		data = ctrl_inw(SCPCR);
 		/* Clear out SCP7MD1,0, SCP4MD1,0,
 		   Set SCP6MD1,0 = {01} (output)  */
-		ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+		ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
 
 		data = ctrl_inb(SCPDR);
 		/* Set /RTS2 (bit6) = 0 */
-		ctrl_outb(data&0xbf, SCPDR);
+		ctrl_outb(data & 0xbf, SCPDR);
 	}
-#endif
+
 	sci_out(port, SCFCR, fcr_val);
 }
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
 static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 {
 	unsigned int fcr_val = 0;
@@ -374,7 +378,7 @@ static void sci_init_pins_irda(struct ua
 
 	sci_out(port, SCFCR, fcr_val);
 }
-
+#endif
 #else
 
 /* For SH7750 */
@@ -385,7 +389,11 @@ static void sci_init_pins_scif(struct ua
 	if (cflag & CRTSCTS) {
 		fcr_val |= SCFCR_MCE;
 	} else {
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+#else
 		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+#endif
 	}
 	sci_out(port, SCFCR, fcr_val);
 }
@@ -422,7 +430,11 @@ static void sci_transmit_chars(struct ua
 
 #if !defined(SCI_ONLY)
 	if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+		txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+#else
 		txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+#endif
 	} else {
 		txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
 	}
@@ -491,7 +503,11 @@ static inline void sci_receive_chars(str
 	while (1) {
 #if !defined(SCI_ONLY)
 		if (port->type == PORT_SCIF) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+			count = sci_in(port, SCRFDR) & 0x7f;
+#else
 			count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+#endif
 		} else {
 			count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
 		}
@@ -652,7 +668,7 @@ static inline int sci_handle_breaks(stru
 	struct tty_struct *tty = port->info->tty;
 	struct sci_port *s = &sci_ports[port->line];
 
-	if (!s->break_flag && status & SCxSR_BRK(port))
+	if (!s->break_flag && status & SCxSR_BRK(port)) {
 #if defined(CONFIG_CPU_SH3)
 		/* Debounce break */
 		s->break_flag = 1;
@@ -783,6 +799,7 @@ static int sci_notifier(struct notifier_
 	    (phase == CPUFREQ_RESUMECHANGE)){
 		for (i = 0; i < SCI_NPORTS; i++) {
 			struct uart_port *port = &sci_ports[i].port;
+			struct clk *clk;
 
 			/*
 			 * Update the uartclk per-port if frequency has
@@ -795,7 +812,9 @@ static int sci_notifier(struct notifier_
 			 *
 			 * Clean this up later..
 			 */
-			port->uartclk = current_cpu_data.module_clock * 16;
+			clk = clk_get("module_clk");
+			port->uartclk = clk_get_rate(clk) * 16;
+			clk_put(clk);
 		}
 
 		printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
@@ -1008,15 +1027,20 @@ static void sci_set_termios(struct uart_
 	sci_out(port, SCSMR, smr_val);
 
 	switch (baud) {
-		case 0:		t = -1;		break;
-		case 2400:	t = BPS_2400;	break;
-		case 4800:	t = BPS_4800;	break;
-		case 9600:	t = BPS_9600;	break;
-		case 19200:	t = BPS_19200;	break;
-		case 38400:	t = BPS_38400;	break;
-		case 57600:	t = BPS_57600;	break;
-		case 115200:	t = BPS_115200;	break;
-		default:	t = SCBRR_VALUE(baud); break;
+		case 0:
+			t = -1;
+			break;
+		default:
+		{
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+			struct clk *clk = clk_get("module_clk");
+			t = SCBRR_VALUE(baud, clk_get_rate(clk));
+			clk_put(clk);
+#else
+			t = SCBRR_VALUE(baud);
+#endif
+		}
+			break;
 	}
 
 	if (t > 0) {
@@ -1030,7 +1054,9 @@ static void sci_set_termios(struct uart_
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	}
 
-	s->init_pins(port, termios->c_cflag);
+	if (likely(s->init_pins))
+		s->init_pins(port, termios->c_cflag);
+
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
 	if ((termios->c_cflag & CREAD) != 0)
@@ -1107,7 +1133,7 @@ static struct uart_ops sci_uart_ops = {
 	.verify_port	= sci_verify_port,
 };
 
-static struct sci_port sci_ports[SCI_NPORTS] = {
+static struct sci_port sci_ports[] = {
 #if defined(CONFIG_CPU_SUBTYPE_SH7708)
 	{
 		.port	= {
@@ -1121,7 +1147,6 @@ static struct sci_port sci_ports[SCI_NPO
 		},
 		.type		= PORT_SCI,
 		.irqs		= SCI_IRQS,
-		.init_pins	= sci_init_pins_sci,
 	},
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 	{
@@ -1165,7 +1190,6 @@ static struct sci_port sci_ports[SCI_NPO
 		},
 		.type		= PORT_SCI,
 		.irqs		= SCI_IRQS,
-		.init_pins	= sci_init_pins_sci,
 	},
 	{
 		.port	= {
@@ -1225,7 +1249,7 @@ static struct sci_port sci_ports[SCI_NPO
 		.irqs		= SH73180_SCIF_IRQS,
 		.init_pins	= sci_init_pins_scif,
 	},
-#elif defined(CONFIG_SH_RTS7751R2D)
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 	{
 		.port	= {
 			.membase	= (void *)0xffe80000,
@@ -1253,7 +1277,6 @@ static struct sci_port sci_ports[SCI_NPO
 		},
 		.type		= PORT_SCI,
 		.irqs		= SCI_IRQS,
-		.init_pins	= sci_init_pins_sci,
 	},
 	{
 		.port	= {
@@ -1312,21 +1335,6 @@ static struct sci_port sci_ports[SCI_NPO
 		.irqs		= SH7760_SCIF2_IRQS,
 		.init_pins	= sci_init_pins_scif,
 	},
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-	{
-		.port	= {
-			.membase	= (void *)0xffe80000,
-			.mapbase	= 0xffe80000,
-			.iotype		= SERIAL_IO_MEM,
-			.irq		= 43,
-			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
-			.line		= 0,
-		},
-		.type		= PORT_SCIF,
-		.irqs		= SH4_SCIF_IRQS,
-		.init_pins	= sci_init_pins_scif,
-	},
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
 	{
 		.port	= {
@@ -1455,6 +1463,78 @@ static struct sci_port sci_ports[SCI_NPO
 		.irqs		= H8S_SCI_IRQS2,
 		.init_pins	= sci_init_pins_sci,
 	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+	{
+		.port   = {
+			.membase	= (void *)0xff923000,
+			.mapbase	= 0xff923000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 61,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7770_SCIF0_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port   = {
+			.membase	= (void *)0xff924000,
+			.mapbase	= 0xff924000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 62,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7770_SCIF1_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port   = {
+			.membase	= (void *)0xff925000,
+			.mapbase	= 0xff925000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 63,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 2,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7770_SCIF2_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+	{
+		.port   = {
+			.membase	= (void *)0xffe00000,
+			.mapbase	= 0xffe00000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 43,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7780_SCIF0_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
+	{
+		.port   = {
+			.membase	= (void *)0xffe10000,
+			.mapbase	= 0xffe10000,
+			.iotype		= SERIAL_IO_MEM,
+			.irq		= 79,
+			.ops		= &sci_uart_ops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+		.type		= PORT_SCIF,
+		.irqs		= SH7780_SCIF1_IRQS,
+		.init_pins	= sci_init_pins_scif,
+	},
 #else
 #error "CPU subtype not defined"
 #endif
@@ -1480,9 +1560,6 @@ static int __init serial_console_setup(s
 	int flow = 'n';
 	int ret;
 
-	if (co->index >= SCI_NPORTS)
-		co->index = 0;
-
 	serial_console_port = &sci_ports[co->index];
 	port = &serial_console_port->port;
 	port->type = serial_console_port->type;
@@ -1496,14 +1573,21 @@ static int __init serial_console_setup(s
 	 * We need to set the initial uartclk here, since otherwise it will
 	 * only ever be setup at sci_init() time.
 	 */
-#if !defined(__H8300H__) && !defined(__H8300S__)
-	port->uartclk = current_cpu_data.module_clock * 16;
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
 	port->uartclk = CONFIG_CPU_CLOCK;
-#endif
+
 #if defined(__H8300S__)
 	h8300_sci_enable(port, sci_enable);
 #endif
+#elif defined(CONFIG_SUPERH64)
+	port->uartclk = current_cpu_info.module_clock * 16;
+#else
+	{
+		struct clk *clk = clk_get("module_clk");
+		port->uartclk = clk_get_rate(clk) * 16;
+		clk_put(clk);
+	}
+#endif
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
@@ -1566,7 +1653,7 @@ int __init kgdb_console_setup(struct con
 	int parity = 'n';
 	int flow = 'n';
 
-	if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+	if (co->index != kgdb_portnum)
 		co->index = kgdb_portnum;
 
 	if (options)
@@ -1606,7 +1693,7 @@ console_initcall(kgdb_console_init);
 #elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
 #define SCI_CONSOLE	&serial_console
 #else
-#define SCI_CONSOLE 	0
+#define SCI_CONSOLE	0
 #endif
 
 static char banner[] __initdata =
@@ -1621,7 +1708,6 @@ static struct uart_driver sci_uart_drive
 	.dev_name	= "ttySC",
 	.major		= SCI_MAJOR,
 	.minor		= SCI_MINOR_START,
-	.nr		= SCI_NPORTS,
 	.cons		= SCI_CONSOLE,
 };
 
@@ -1631,15 +1717,21 @@ static int __init sci_init(void)
 
 	printk("%s", banner);
 
+	sci_uart_driver.nr = ARRAY_SIZE(sci_ports);
+
 	ret = uart_register_driver(&sci_uart_driver);
 	if (ret == 0) {
 		for (chan = 0; chan < SCI_NPORTS; chan++) {
 			struct sci_port *sciport = &sci_ports[chan];
 
-#if !defined(__H8300H__) && !defined(__H8300S__)
-			sciport->port.uartclk = (current_cpu_data.module_clock * 16);
-#else
+#if defined(__H8300H__) || defined(__H8300S__)
 			sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#elif defined(CONFIG_SUPERH64)
+			sciport->port.uartclk = current_cpu_info.module_clock * 16;
+#else
+			struct clk *clk = clk_get("module_clk");
+			sciport->port.uartclk = clk_get_rate(clk) * 16;
+			clk_put(clk);
 #endif
 			uart_add_one_port(&sci_uart_driver, &sciport->port);
 			sciport->break_timer.data = (unsigned long)sciport;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 2892169..1f14bb4 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -46,14 +46,17 @@
 #define H8S_SCI_IRQS1 {92, 93, 94,   0 }
 #define H8S_SCI_IRQS2 {96, 97, 98,   0 }
 #define SH5_SCIF_IRQS {39, 40, 42,   0 }
+#define	SH7770_SCIF0_IRQS {61, 61, 61, 61 }
+#define	SH7770_SCIF1_IRQS {62, 62, 62, 62 }
+#define	SH7770_SCIF2_IRQS {63, 63, 63, 63 }
+#define	SH7780_SCIF0_IRQS {40, 41, 43, 42 }
+#define	SH7780_SCIF1_IRQS {76, 77, 79, 78 }
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define SCI_NPORTS 1
 # define SCSPTR 0xffffff7c /* 8 bit */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-# define SCI_NPORTS 3
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
@@ -61,9 +64,8 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0		0xA4400000
 # define SCIF2		0xA4410000
-# define SCSMR_Ir 	0xA44A0000
-# define IRDA_SCIF 	SCIF0
-# define SCI_NPORTS 2
+# define SCSMR_Ir	0xA44A0000
+# define IRDA_SCIF	SCIF0
 # define SCPCR 0xA4000116
 # define SCPDR 0xA4000136
 
@@ -74,14 +76,11 @@
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 # define SCIF_ONLY
 #elif defined(CONFIG_SH_RTS7751R2D)
-# define SCI_NPORTS 1
-# define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define SCI_NPORTS 2
 # define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -90,34 +89,29 @@
 	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
 # define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define SCI_NPORTS 3
-# define SCSPTR0 0xfe600000 /* 16 bit SCIF */
-# define SCSPTR1 0xfe610000 /* 16 bit SCIF */
-# define SCSPTR2 0xfe620000 /* 16 bit SCIF */
+# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
+# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
+# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define SCI_NPORTS 1
 # define SCPCR  0xA4050116        /* 16 bit SCIF */
 # define SCPDR  0xA4050136        /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-# define SCI_NPORTS 1
 # define SCPDR  0xA4050138        /* 16 bit SCIF */
 # define SCSPTR2 SCPDR
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port)  0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define SCI_NPORTS 1
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define SCI_NPORTS 2
 # define SCSPTR1 0xffe00020 /* 16 bit SCIF */
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -129,26 +123,32 @@
 # define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
 # define SCIF_PTR2_OFFS    0x0000020
 # define SCIF_LSR2_OFFS    0x0000024
-# define SCI_NPORTS 1
-# define SCI_INIT { \
-  { {}, PORT_SCIF, 0, \
-     SH5_SCIF_IRQS, sci_init_pins_scif }  \
-}
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x38                           /* TIE=0,RIE=0,
 							     TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
-# define SCI_NPORTS 3
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
-# define SCI_NPORTS 3
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+# define SCSPTR0 0xff923020 /* 16 bit SCIF */
+# define SCSPTR1 0xff924020 /* 16 bit SCIF */
+# define SCSPTR2 0xff925020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)	0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+# define SCSPTR0	0xffe00024	/* 16 bit SCIF */
+# define SCSPTR1	0xffe10024	/* 16 bit SCIF */
+# define SCIF_OPER	0x0001		/* Overrun error bit */
+# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -158,7 +158,7 @@
 #define SCI_CTRL_FLAGS_RIE  0x40 /* all */
 #define SCI_CTRL_FLAGS_TE   0x20 /* all */
 #define SCI_CTRL_FLAGS_RE   0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
 #else
 #define SCI_CTRL_FLAGS_REIE 0
@@ -213,7 +213,7 @@
 # define SCxSR_RDxF_CLEAR(port)		0xbc
 # define SCxSR_ERROR_CLEAR(port)	0xc4
 # define SCxSR_TDxE_CLEAR(port)		0x78
-# define SCxSR_BREAK_CLEAR(port)   	0xc4
+# define SCxSR_BREAK_CLEAR(port)	0xc4
 #elif defined(SCIF_ONLY)
 # define SCxSR_TEND(port)		SCIF_TEND
 # define SCxSR_ERRORS(port)		SCIF_ERRORS
@@ -237,7 +237,7 @@
 # define SCxSR_RDxF_CLEAR(port)		0x00fc
 # define SCxSR_ERROR_CLEAR(port)	0x0073
 # define SCxSR_TDxE_CLEAR(port)		0x00df
-# define SCxSR_BREAK_CLEAR(port)   	0x00e3
+# define SCxSR_BREAK_CLEAR(port)	0x00e3
 #endif
 #else
 # define SCxSR_TEND(port)	 (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
@@ -285,14 +285,14 @@ struct sci_port {
 
 #define SCI_IN(size, offset)					\
   unsigned int addr = port->mapbase + (offset);			\
-  if ((size) == 8) { 						\
+  if ((size) == 8) {						\
     return ctrl_inb(addr);					\
-  } else {					 		\
+  } else {							\
     return ctrl_inw(addr);					\
   }
 #define SCI_OUT(size, offset, value)				\
   unsigned int addr = port->mapbase + (offset);			\
-  if ((size) == 8) { 						\
+  if ((size) == 8) {						\
     ctrl_outb(value, addr);					\
   } else {							\
     ctrl_outw(value, addr);					\
@@ -301,10 +301,10 @@ struct sci_port {
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
-    if (port->type == PORT_SCI) { 					\
+    if (port->type == PORT_SCI) {					\
       SCI_IN(sci_size, sci_offset)					\
     } else {								\
-      SCI_IN(scif_size, scif_offset);		 			\
+      SCI_IN(scif_size, scif_offset);					\
     }									\
   }									\
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
@@ -319,7 +319,7 @@ struct sci_port {
 #define CPU_SCIF_FNS(name, scif_offset, scif_size)				\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
-    SCI_IN(scif_size, scif_offset);		 			\
+    SCI_IN(scif_size, scif_offset);					\
   }									\
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
   {									\
@@ -329,7 +329,7 @@ struct sci_port {
 #define CPU_SCI_FNS(name, sci_offset, sci_size)				\
   static inline unsigned int sci_##name##_in(struct uart_port* port)	\
   {									\
-    SCI_IN(sci_size, sci_offset);		 			\
+    SCI_IN(sci_size, sci_offset);					\
   }									\
   static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
   {									\
@@ -385,10 +385,17 @@ SCIx_FNS(SCxTDR, 0x06,  8, 0x0c,  8, 0x0
 SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
+#else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCSPTR,                        0,  0, 0x20, 16)
 SCIF_FNS(SCLSR,                         0,  0, 0x24, 16)
 #endif
+#endif
 #define sci_in(port, reg) sci_##reg##_in(port)
 #define sci_out(port, reg, value) sci_##reg##_out(port, value)
 
@@ -518,6 +525,24 @@ static inline int sci_rxd_in(struct uart
 	int ch = (port->mapbase - SMR0) >> 3;
 	return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xff923000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xff924000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xff925000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffe10000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+}
 #endif
 
 /*
@@ -552,22 +577,15 @@ static inline int sci_rxd_in(struct uart
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#define PCLK           (current_cpu_data.module_clock)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
-#elif !defined(__H8300H__) && !defined(__H8300S__)
-#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
-#else
+#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
+#elif defined(CONFIG_SUPERH64)
+#define SCBRR_VALUE(bps) ((current_cpu_data.module_clock+16*bps)/(32*bps)-1)
+#else /* Generic SH */
+#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
 #endif
-#define BPS_2400       SCBRR_VALUE(2400)
-#define BPS_4800       SCBRR_VALUE(4800)
-#define BPS_9600       SCBRR_VALUE(9600)
-#define BPS_19200      SCBRR_VALUE(19200)
-#define BPS_38400      SCBRR_VALUE(38400)
-#define BPS_57600      SCBRR_VALUE(57600)
-#define BPS_115200     SCBRR_VALUE(115200)
 

[PATCH 9/11] sh: Add missing timers directory rule to build.

[Paul Mundt]

This should have been part of the timer framework support that
was merged earlier, but looks to have been accidentally omitted.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/kernel/Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

1e8f7de2d6e5dad3db913b8ff15c4d20c8555c33
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 7a86eeb..f05cd96 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -8,7 +8,7 @@ obj-y	:= process.o signal.o entry.o trap
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
 	io.o io_generic.o sh_ksyms.o
 
-obj-y				+= cpu/
+obj-y				+= cpu/ timers/
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o

[PATCH 10/11] sh: machine_halt()/machine_power_off() cleanups.

[Paul Mundt]

machine_halt() managed to trigger the soft lockup detection
due to not disabling interrupts before going to sleep, so
correct that.

machine_power_off() should be using pm_power_off, which
lets us drop the board-specific hacks from here.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 arch/sh/kernel/process.c |   54 ++++++++++++++++++++++------------------------
 1 files changed, 26 insertions(+), 28 deletions(-)

38550502f429e90b18c2d05cd976593b63d164f0
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index a4dc2b5..9fd1723 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -15,21 +15,18 @@
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/elfcore.h>
-#include <linux/slab.h>
 #include <linux/a.out.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/platform.h>
 #include <linux/kallsyms.h>
+#include <linux/kexec.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/elf.h>
-#if defined(CONFIG_SH_HS7751RVOIP)
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-#elif defined(CONFIG_SH_RTS7751R2D)
-#include <asm/rts7751r2d/rts7751r2d.h>
-#endif
 
 static int hlt_counter=0;
 
@@ -37,6 +34,11 @@ int ubc_usercnt = 0;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
+void (*pm_idle)(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 void disable_hlt(void)
 {
 	hlt_counter++;
@@ -51,17 +53,25 @@ void enable_hlt(void)
 
 EXPORT_SYMBOL(enable_hlt);
 
+void default_idle(void)
+{
+	if (!hlt_counter)
+		cpu_sleep();
+	else
+		cpu_relax();
+}
+
 void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		if (hlt_counter) {
-			while (!need_resched())
-				cpu_relax();
-		} else {
-			while (!need_resched())
-				cpu_sleep();
-		}
+		void (*idle)(void) = pm_idle;
+
+		if (!idle)
+			idle = default_idle;
+
+		while (!need_resched())
+			idle();
 
 		preempt_enable_no_resched();
 		schedule();
@@ -88,28 +98,16 @@ void machine_restart(char * __unused)
 
 void machine_halt(void)
 {
-#if defined(CONFIG_SH_HS7751RVOIP)
-	unsigned short value;
+	local_irq_disable();
 
-	value = ctrl_inw(PA_OUTPORTR);
-	ctrl_outw((value & 0xffdf), PA_OUTPORTR);
-#elif defined(CONFIG_SH_RTS7751R2D)
-	ctrl_outw(0x0001, PA_POWOFF);
-#endif
 	while (1)
 		cpu_sleep();
 }
 
 void machine_power_off(void)
 {
-#if defined(CONFIG_SH_HS7751RVOIP)
-	unsigned short value;
-
-	value = ctrl_inw(PA_OUTPORTR);
-	ctrl_outw((value & 0xffdf), PA_OUTPORTR);
-#elif defined(CONFIG_SH_RTS7751R2D)
-	ctrl_outw(0x0001, PA_POWOFF);
-#endif
+	if (pm_power_off)
+		pm_power_off();
 }
 
 void show_regs(struct pt_regs * regs)

[PATCH 11/11] sh/sh64: Fix bogus TIOCGICOUNT definitions.

[Paul Mundt]

As reported by Russell King, sh and sh64 currently have bogus
definitions for TIOCGICOUNT, particularly referencing a kernel
only structure. Switch to using a sensible ioctl value.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

---

 include/asm-sh/ioctls.h   |    2 +-
 include/asm-sh64/ioctls.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

60ddf0b381277105382046b3181e00046b0f2137
diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h
index 1866f3f..9d84a2d 100644
--- a/include/asm-sh/ioctls.h
+++ b/include/asm-sh/ioctls.h
@@ -94,6 +94,6 @@
 #define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* 0x545B */ /* Set multiport config */
 
 #define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	_IOR('T', 93, struct async_icount) /* 0x545D */	/* read serial port inline interrupt counts */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 
 #endif /* __ASM_SH_IOCTLS_H */
diff --git a/include/asm-sh64/ioctls.h b/include/asm-sh64/ioctls.h
index 08f3c1f..6b0c04f 100644
--- a/include/asm-sh64/ioctls.h
+++ b/include/asm-sh64/ioctls.h
@@ -111,6 +111,6 @@
 #define TIOCSERSETMULTI 0x40a8545b	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
 
 #define TIOCMIWAIT	0x545c		/* _IO('T', 92) wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x802c545d	/* _IOR('T', 93, struct async_icount) 0x545D */	/* read serial port inline interrupt counts */
+#define TIOCGICOUNT	0x545d		/* read serial port inline interrupt counts */
 
 #endif /* __ASM_SH64_IOCTLS_H */