Re: Help: DGE-560T not recognized by Linux

[Brian Hall <brihall@pcisys.net>]

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

On Mon, Feb 20, 2006 at 12:43:41PM +0100, Willy Tarreau wrote:
> Today, I had the *exact* same problem on one server equipped with the same
> card. I tried the patch above which did not change anything. However, I
> finally fixed it by simply enabling ACPI. Then it always works with and
> without the patch above. I could not test marvell's driver because it does
> not build on 2.6.16-rc4, but strangely my previous kernel on this machine
> was a 2.6.12-rc4-mm2 patched with marvell's driver and with ACPI disabled.
> 
> So it seems that marvell's driver on 2.6.12 was able to access config space
> even without ACPI while sky2 on 2.6.16-rc4 cannot. I have no idea why,
> unfortunately.
> 
> Just my 2 cents,
> Willy

Thanks for the input. As far as I can tell I do have ACPI enabled, and
sky2 still fails on 2.6.15, 2.6.16-rc3 or -rc4. See my attached dmesg
output and config.

Also, if you get the latest driver from Marvel it does apply to more
recent kernels (install-8_30.tar.bz2), 2.6.15 for sure.

I have the Marvell script generated patches for 2.6.15 and 
2.6.16-rc3 available, but they are 350K each compressed which seems
a bit large to email.

I made them available from my website if you are interested:

http://home.pcisys.net/~brihall/sk98lin_v8.30.2.3_2.6.15_patch.gz

http://home.pcisys.net/~brihall/sk98lin_v8.30.2.3_2.6.16_patch.gz

 
--
Brian Hall
Linux Consultant
http://pcisys.net/~brihall

[-- Attachment #2: config.gz --]
[-- Type: application/octet-stream, Size: 3747 bytes --]

[-- Attachment #3: 2.6.15-ck4.dmesg.txt.gz --]
[-- Type: application/octet-stream, Size: 5420 bytes --]