From: Francesco Biscani <biscani@pd.astro.it>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libata PATA patch for 2.6.16-rc5
Date: Tue, 28 Feb 2006 23:32:22 +0100 [thread overview]
Message-ID: <200602282332.22672.biscani@pd.astro.it> (raw)
In-Reply-To: <1141054370.3089.0.camel@localhost.localdomain>
On Monday 27 February 2006 16:32, Alan Cox wrote:
> This is at
> http://zeniv.linux.org.uk/~alan/IDE
>
> Some more fixes, and the ALi driver should now work although I've yet to
> finish the MWDMA work or finish chasing down the slow performance.
>
Hello Alan,
on ALi here devices are now recognized successfully. Some excerpts from the
logs:
libata version 1.20 loaded.
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 irq 14
ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3e48 87:4023
88:203f
ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ali
Vendor: ATA Model: IC25N040ATMR04-0 Rev: MO2O
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000
88:0000
ata2: dev 0 ATAPI, max MWDMA2
ata2: dev 0 configured for PIO4
scsi1 : ali
Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: 0C29
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
The improvement from the previous patch is that the cdrom is seen as "sr0" now
(instead of "sdb") and the bogus warnings have disappeared. Performances are
still low, as expected. Please tell me if I can do something else.
Thanks and regards,
Francesco
--
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@pd.astro.it
next prev parent reply other threads:[~2006-02-28 22:32 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-27 15:32 libata PATA patch for 2.6.16-rc5 Alan Cox
2006-02-27 17:55 ` Mathieu Chouquet-Stringer
2006-02-28 0:19 ` Alan Cox
2006-02-28 12:12 ` Krzysztof Halasa
2006-02-28 13:32 ` Alan Cox
2006-02-28 13:34 ` Alan Cox
2006-02-27 20:46 ` Matthieu CASTET
[not found] ` <1141086963.3089.26.camel@localhost.localdomain>
2006-03-05 18:49 ` matthieu castet
[not found] ` <4404D05C.8070407@free.fr>
[not found] ` <1141231247.23170.0.camel@localhost.localdomain>
[not found] ` <44061F96.80900@free.fr>
2006-03-13 19:52 ` matthieu castet
2006-02-28 0:30 ` Christian Trefzer
2006-02-28 9:49 ` Alan Cox
2006-02-28 10:05 ` Christian Trefzer
2006-02-28 10:20 ` [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile (was: Re: libata PATA patch for 2.6.16-rc5) Christian Trefzer
2006-02-28 10:41 ` Christian Trefzer
2006-02-28 10:58 ` Christian Trefzer
2008-10-14 1:28 ` [PATCH] Add pata_pdc_2ß27x to Kconfig and Makefile Tejun Heo
2008-10-14 8:01 ` Christian Trefzer
2008-10-14 8:09 ` Tejun Heo
2006-02-28 22:32 ` Francesco Biscani [this message]
2006-02-28 23:06 ` libata PATA patch for 2.6.16-rc5 Francesco Biscani
-- strict thread matches above, loose matches on Subject: below --
2006-02-28 23:42 Chris Boot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200602282332.22672.biscani@pd.astro.it \
--to=biscani@pd.astro.it \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox