Another compile problem with 2.6.15.5 on AMD64

Another compile problem with 2.6.15.5 on AMD64

[Steffen Weber]

I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4 
(does not seem to be related to the NFS one):

   CC      mm/mempolicy.o
mm/mempolicy.c: In function `get_nodes':
mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
this function)
mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
once
mm/mempolicy.c:527: error: for each function it appears in.)

It works fine on x86 machines.

Steffen Weber

Re: Another compile problem with 2.6.15.5 on AMD64

[Jesper Juhl]

On Thursday 02 March 2006 17:18, Steffen Weber wrote:
> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4 
> (does not seem to be related to the NFS one):
> 
>    CC      mm/mempolicy.o
> mm/mempolicy.c: In function `get_nodes':
> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
> this function)
> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
> once
> mm/mempolicy.c:527: error: for each function it appears in.)
> 

Try the following (untested patch).


Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
---

 mm/mempolicy.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

--- linux-2.6.15.5/mm/mempolicy.c~	2006-03-02 18:05:18.000000000 +0100
+++ linux-2.6.15.5/mm/mempolicy.c	2006-03-02 18:05:18.000000000 +0100
@@ -82,7 +82,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/compat.h>
-#include <linux/mempolicy.h>
+#include <linux/types.h>
 #include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 

Re: Another compile problem with 2.6.15.5 on AMD64

[Steffen Weber]

Jesper Juhl wrote:
> On Thursday 02 March 2006 17:18, Steffen Weber wrote:
>> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4 
>> (does not seem to be related to the NFS one):
>>
>>    CC      mm/mempolicy.o
>> mm/mempolicy.c: In function `get_nodes':
>> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
>> this function)
>> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
>> once
>> mm/mempolicy.c:527: error: for each function it appears in.)
>>
> 
> Try the following (untested patch).
Thanks for your reply, but this patch does not solve the problem (same 
error message). I´ve appended my .config in case that might help.

Steffen



CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_LBD=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=32
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_X86_PM_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_UNORDERED_IO=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
CONFIG_IP_NF_MATCH_CONNMARK=y
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

Re: Another compile problem with 2.6.15.5 on AMD64

[Jesper Juhl]

On 3/2/06, Steffen Weber <email@steffenweber.net> wrote:
> Jesper Juhl wrote:
> > On Thursday 02 March 2006 17:18, Steffen Weber wrote:
> >> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4
> >> (does not seem to be related to the NFS one):
> >>
> >>    CC      mm/mempolicy.o
> >> mm/mempolicy.c: In function `get_nodes':
> >> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
> >> this function)
> >> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
> >> once
> >> mm/mempolicy.c:527: error: for each function it appears in.)
> >>
> >
> > Try the following (untested patch).
> Thanks for your reply, but this patch does not solve the problem (same
> error message). I´ve appended my .config in case that might help.
>

Hmm, types.h contains the

#define BITS_PER_BYTE 8

that mmpolicy.c needs, so including that header should do the trick... odd..
I'll look at the code a bit more.

--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

Re: Another compile problem with 2.6.15.5 on AMD64

[Steffen Weber]

Jesper Juhl wrote:
> On 3/2/06, Steffen Weber <email@steffenweber.net> wrote:
>> Jesper Juhl wrote:
>>> On Thursday 02 March 2006 17:18, Steffen Weber wrote:
>>>> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4
>>>> (does not seem to be related to the NFS one):
>>>>
>>>>    CC      mm/mempolicy.o
>>>> mm/mempolicy.c: In function `get_nodes':
>>>> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
>>>> this function)
>>>> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
>>>> once
>>>> mm/mempolicy.c:527: error: for each function it appears in.)
>>>>
>>> Try the following (untested patch).
>> Thanks for your reply, but this patch does not solve the problem (same
>> error message). I´ve appended my .config in case that might help.
>>
> 
> Hmm, types.h contains the
> 
> #define BITS_PER_BYTE 8
> 
> that mmpolicy.c needs, so including that header should do the trick... odd..
> I'll look at the code a bit more.
There is no BITS_PER_BYTE in include/types.h. I´ve grepped through the 
kernel source (2.6.15 and 2.6.15.5) and found that BITS_PER_BYTE is 
defined only in arch/i386/mach-voyager/voyager_cat.c

Steffen

Re: Another compile problem with 2.6.15.5 on AMD64

[Jesper Juhl]

On Thursday 02 March 2006 18:49, Steffen Weber wrote:
> Jesper Juhl wrote:
> > On 3/2/06, Steffen Weber <email@steffenweber.net> wrote:
> >> Jesper Juhl wrote:
> >>> On Thursday 02 March 2006 17:18, Steffen Weber wrote:
> >>>> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4
> >>>> (does not seem to be related to the NFS one):
> >>>>
> >>>>    CC      mm/mempolicy.o
> >>>> mm/mempolicy.c: In function `get_nodes':
> >>>> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
> >>>> this function)
> >>>> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
> >>>> once
> >>>> mm/mempolicy.c:527: error: for each function it appears in.)
> >>>>
> >>> Try the following (untested patch).
> >> Thanks for your reply, but this patch does not solve the problem (same
> >> error message). I´ve appended my .config in case that might help.
> >>
> > 
> > Hmm, types.h contains the
> > 
> > #define BITS_PER_BYTE 8
> > 
> > that mmpolicy.c needs, so including that header should do the trick... odd..
> > I'll look at the code a bit more.
> There is no BITS_PER_BYTE in include/types.h. I´ve grepped through the 
> kernel source (2.6.15 and 2.6.15.5) and found that BITS_PER_BYTE is 
> defined only in arch/i386/mach-voyager/voyager_cat.c
> 

Whoops, I was looking here : http://sosdg.org/~coywolf/lxr/source/include/linux/types.h#L11

Try this patch instead : 



Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
---

 arch/i386/mach-voyager/voyager_cat.c |    1 -
 include/linux/types.h                |    2 ++
 mm/mempolicy.c                       |    2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)

--- linux-2.6.15.5/mm/mempolicy.c~	2006-03-02 18:05:18.000000000 +0100
+++ linux-2.6.15.5/mm/mempolicy.c	2006-03-02 18:05:18.000000000 +0100
@@ -82,7 +82,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/compat.h>
-#include <linux/mempolicy.h>
+#include <linux/types.h>
 #include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 
--- linux-2.6.15.5/arch/i386/mach-voyager/voyager_cat.c~	2006-03-02 18:55:47.000000000 +0100
+++ linux-2.6.15.5/arch/i386/mach-voyager/voyager_cat.c	2006-03-02 18:55:47.000000000 +0100
@@ -114,7 +114,6 @@ static struct resource qic_res = {
  * It writes num_bits of the data buffer in msg starting at start_bit.
  * Note: This function assumes that any unused bit in the data stream
  * is set to zero so that the ors will work correctly */
-#define BITS_PER_BYTE 8
 static void
 cat_pack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits)
 {
--- linux-2.6.15.5/include/linux/types.h~	2006-03-02 18:54:57.000000000 +0100
+++ linux-2.6.15.5/include/linux/types.h	2006-03-02 18:54:57.000000000 +0100
@@ -8,6 +8,8 @@
 	(((bits)+BITS_PER_LONG-1)/BITS_PER_LONG)
 #define DECLARE_BITMAP(name,bits) \
 	unsigned long name[BITS_TO_LONGS(bits)]
+
+#define BITS_PER_BYTE 8
 #endif
 
 #include <linux/posix_types.h>

Re: Another compile problem with 2.6.15.5 on AMD64

[Steffen Weber]

Jesper Juhl wrote:
> On Thursday 02 March 2006 18:49, Steffen Weber wrote:
>> Jesper Juhl wrote:
>>> On 3/2/06, Steffen Weber <email@steffenweber.net> wrote:
>>>> Jesper Juhl wrote:
>>>>> On Thursday 02 March 2006 17:18, Steffen Weber wrote:
>>>>>> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4
>>>>>> (does not seem to be related to the NFS one):
>>>>>>
>>>>>>    CC      mm/mempolicy.o
>>>>>> mm/mempolicy.c: In function `get_nodes':
>>>>>> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
>>>>>> this function)
>>>>>> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
>>>>>> once
>>>>>> mm/mempolicy.c:527: error: for each function it appears in.)
>>>>>>
>>>>> Try the following (untested patch).
>>>> Thanks for your reply, but this patch does not solve the problem (same
>>>> error message). I´ve appended my .config in case that might help.
>>>>
>>> Hmm, types.h contains the
>>>
>>> #define BITS_PER_BYTE 8
>>>
>>> that mmpolicy.c needs, so including that header should do the trick... odd..
>>> I'll look at the code a bit more.
>> There is no BITS_PER_BYTE in include/types.h. I´ve grepped through the 
>> kernel source (2.6.15 and 2.6.15.5) and found that BITS_PER_BYTE is 
>> defined only in arch/i386/mach-voyager/voyager_cat.c
>>
> 
> Whoops, I was looking here : http://sosdg.org/~coywolf/lxr/source/include/linux/types.h#L11
> 
> Try this patch instead : 
This patch solves the problem! :-) I have not yet rebooted the machine 
(it´s a busy webserver), but in case I do not reply again within one day 
you can assume that it works fine. Thank you very much!

Steffen

Re: Another compile problem with 2.6.15.5 on AMD64

[Jesper Juhl]

On Thursday 02 March 2006 19:07, Steffen Weber wrote:
> Jesper Juhl wrote:
> > On Thursday 02 March 2006 18:49, Steffen Weber wrote:
> >> Jesper Juhl wrote:
> >>> On 3/2/06, Steffen Weber <email@steffenweber.net> wrote:
> >>>> Jesper Juhl wrote:
> >>>>> On Thursday 02 March 2006 17:18, Steffen Weber wrote:
> >>>>>> I´m getting a compile error with 2.6.15.5 on x86_64 using GCC 3.4.4
> >>>>>> (does not seem to be related to the NFS one):
> >>>>>>
> >>>>>>    CC      mm/mempolicy.o
> >>>>>> mm/mempolicy.c: In function `get_nodes':
> >>>>>> mm/mempolicy.c:527: error: `BITS_PER_BYTE' undeclared (first use in
> >>>>>> this function)
> >>>>>> mm/mempolicy.c:527: error: (Each undeclared identifier is reported only
> >>>>>> once
> >>>>>> mm/mempolicy.c:527: error: for each function it appears in.)
> >>>>>>
[snip]
> > 
> > Try this patch instead : 
> This patch solves the problem! :-) I have not yet rebooted the machine 
> (it´s a busy webserver), but in case I do not reply again within one day 
> you can assume that it works fine. Thank you very much!
> 

Thank you for the feedback.

Andi, Christoph : would this make sense as a fix for -stable ?
How about mainline ?


Fix build error in mm/mempolicy.c due to missing `BITS_PER_BYTE'.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
---

 arch/i386/mach-voyager/voyager_cat.c |    1 -
 include/linux/types.h                |    2 ++
 mm/mempolicy.c                       |    2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)

--- linux-2.6.15.5/mm/mempolicy.c~	2006-03-02 18:05:18.000000000 +0100
+++ linux-2.6.15.5/mm/mempolicy.c	2006-03-02 18:05:18.000000000 +0100
@@ -82,7 +82,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/compat.h>
-#include <linux/mempolicy.h>
+#include <linux/types.h>
 #include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 
--- linux-2.6.15.5/arch/i386/mach-voyager/voyager_cat.c~	2006-03-02 18:55:47.000000000 +0100
+++ linux-2.6.15.5/arch/i386/mach-voyager/voyager_cat.c	2006-03-02 18:55:47.000000000 +0100
@@ -114,7 +114,6 @@ static struct resource qic_res = {
  * It writes num_bits of the data buffer in msg starting at start_bit.
  * Note: This function assumes that any unused bit in the data stream
  * is set to zero so that the ors will work correctly */
-#define BITS_PER_BYTE 8
 static void
 cat_pack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits)
 {
--- linux-2.6.15.5/include/linux/types.h~	2006-03-02 18:54:57.000000000 +0100
+++ linux-2.6.15.5/include/linux/types.h	2006-03-02 18:54:57.000000000 +0100
@@ -8,6 +8,8 @@
 	(((bits)+BITS_PER_LONG-1)/BITS_PER_LONG)
 #define DECLARE_BITMAP(name,bits) \
 	unsigned long name[BITS_TO_LONGS(bits)]
+
+#define BITS_PER_BYTE 8
 #endif
 
 #include <linux/posix_types.h>

Re: Another compile problem with 2.6.15.5 on AMD64

[Andi Kleen]

On Thursday 02 March 2006 19:16, Jesper Juhl wrote:

> Andi, Christoph : would this make sense as a fix for -stable ?

It's already fixed in stable.

> How about mainline ?

mainline never had this problem. The backport was just bad.

-Andi

Re: Another compile problem with 2.6.15.5 on AMD64

[Jesper Juhl]

On 3/2/06, Andi Kleen <ak@suse.de> wrote:
> On Thursday 02 March 2006 19:16, Jesper Juhl wrote:
>
> > Andi, Christoph : would this make sense as a fix for -stable ?
>
> It's already fixed in stable.
>

Hmm, ok, so it's in the queue for 2.6.15.6 (since it obviously isn't
in current 2.6.15.5 -stable as that's where Steffen hit it), that's
good.

> > How about mainline ?
>
> mainline never had this problem. The backport was just bad.
>

Hmm, I see that at least two things from the patch seems to be
aplicable to at least current -mm (haven't checked latest Linus -git
yet).
The bit that removes BITS_PER_BYTE from
arch/i386/mach-voyager/voyager_cat.c and the bit that removes the
duplicate #include <linux/mempolicy.h> and substitutes it with
#include <linux/types.h>  those bits would seem to apply to
2.6.16-rc5-mm1

include/linux/types.h already has the BITSPER_BYTE define in -mm.


--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

Re: Another compile problem with 2.6.15.5 on AMD64

[Christoph Lameter]

On Thu, 2 Mar 2006, Jesper Juhl wrote:

> include/linux/types.h already has the BITSPER_BYTE define in -mm.

Its already in 2.6.16-rc.

christoph@schroedinger:~/software/linux$ grep BITS_PER_BYTE */include/linux/*
linux-2.6.16-rc2/include/linux/types.h:#define BITS_PER_BYTE 8
linux-2.6.16-rc3/include/linux/types.h:#define BITS_PER_BYTE 8
linux-2.6.16-rc4/include/linux/types.h:#define BITS_PER_BYTE 8
linux-2.6.16-rc5/include/linux/types.h:#define BITS_PER_BYTE 8

(dont have rc1 and 15 in that directory)