[2.6 patch] ALSA-Configuration.txt: snd-hda-intel: document model=basic

[Adrian Bunk <bunk@stusta.de>]

On Wed, Mar 01, 2006 at 11:29:03AM +0100, Takashi Iwai wrote:
> At Tue, 28 Feb 2006 17:28:36 -0300,
> Otavio Salvador wrote:
> > 
> > Takashi Iwai <tiwai@suse.de> writes:
> > 
> > > At Tue, 28 Feb 2006 05:51:26 -0300,
> > > Otavio Salvador wrote:
> > >> 
> > >> > This kind of problem is likely due to a broken BIOS.  The current code
> > >> > parses the default pin configuration set up via BIOS while the older
> > >> > version used  the fixed pin assignment (depending on the codec chip,
> > >> > though).
> > >> > In most cases, it can be recovered by specifying a proper model module
> > >> > option.  See ALSA-Configuration.txt for details.
> > >> 
> > >> I wasn't able to do it.
> > >
> > > Didn't it worked?  Which module parameter did you use?
> > 
> > I tried model=hp, model=fujistsu and priority_fix={1,2}. Neither did
> > it work.
> 
> Try model=basic.  It's the old default.
> (seems that it's missing in the documentation...)

What about the patch below for 2.6.16?

> Takashi

cu
Adrian


<--  snip  -->


Document the model=basic option in the snd-hda-intel driver.


Signed-off-by: Adrian Bunk <bunk@stusta.de>

--- linux-2.6.16-rc5-mm2-full/Documentation/sound/alsa/ALSA-Configuration.txt.old	2006-03-04 15:52:50.000000000 +0100
+++ linux-2.6.16-rc5-mm2-full/Documentation/sound/alsa/ALSA-Configuration.txt	2006-03-04 15:57:10.000000000 +0100
@@ -705,6 +705,7 @@
 			$CONFIG_SND_DEBUG=y
 
 	ALC260
+	  basic		base mode
 	  hp		HP machines
 	  fujitsu	Fujitsu S7020