From: Parag Warudkar <kernel-stuff@comcast.net>
To: Takashi Iwai <tiwai@suse.de>
Cc: Otavio Salvador <otavio@debian.org>, Adrian Bunk <bunk@stusta.de>,
"S. Umar" <umar@compsci.cas.vanderbilt.edu>,
linux-kernel@vger.kernel.org
Subject: Re: ALSA HDA Intel stoped to work in 2.6.16-*
Date: Sun, 12 Mar 2006 03:11:09 -0500 [thread overview]
Message-ID: <200603120311.09105.kernel-stuff@comcast.net> (raw)
In-Reply-To: <s5hr75fley8.wl%tiwai@suse.de>
On Monday 06 March 2006 11:23, Takashi Iwai wrote:
> At Mon, 06 Mar 2006 13:19:30 -0300,
>
> Otavio Salvador wrote:
> > Takashi Iwai <tiwai@suse.de> writes:
> > >> Shouldn't this fix go into 2.6.16?
> > >
> > > Unfortunately it's involved with many other patches (especially
> > > semahpore->mutex ones) and hard to cherry-pick...
> >
> > I could prepare another patch just to fix it and then put it in on
> > 2.6.16.
I have a DELL E1705 Laptop and snd-intel-hda used to work for me in 2.6.15 -
it no longer works (Silence, no sound, no errors in dmesg) with 2.6.16-rc6.
I have tried to load snd_hda_intel with model=basic but even then it did not
work for me.
cat /proc/asound/cards
0 [01cd ]: HDA-Intel - HDA Intel
HDA Intel at 0xdfebc000 irq 233
cat /proc/asound/01cd/
codec#0 codec#1 id oss_mixer pcm0c/ pcm0p/ pcm1p/
paragw@penguin ~ $ cat /proc/asound/01cd/codec#0
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801cd
Revision Id: 0x102201
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
PCM: rates 0x160, bits 0x0e, types 0x5
Connection: 1
0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
PCM: rates 0x1e0, bits 0x0e, types 0x5
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
Connection: 3
0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN
Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01441340: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 2
0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x9f 0x9f]
Connection: 1
0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 5
0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP
Pin Default 0x0421421f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
Pin-ctls: 0x00:
Connection: 1
0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP
Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT
Pin Default 0x408003fb: [N/A] Line In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1
0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT
Pin Default 0x04a1102e: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x90170311: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x403003fc: [N/A] CD at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
cat /proc/asound/01cd/codec#1
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Parag
next prev parent reply other threads:[~2006-03-12 8:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-27 15:00 ALSA HDA Intel stoped to work in 2.6.16-* S. Umar
2006-02-27 16:00 ` Takashi Iwai
2006-03-04 14:46 ` Adrian Bunk
2006-03-06 14:14 ` Takashi Iwai
2006-03-06 16:19 ` Otavio Salvador
2006-03-06 16:23 ` Takashi Iwai
2006-03-12 8:11 ` Parag Warudkar [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-02-27 15:20 S. Umar
2006-02-27 15:58 ` Takashi Iwai
2006-02-27 13:15 Otavio Salvador
2006-02-27 14:49 ` Diego Calleja
2006-02-28 8:34 ` Otavio Salvador
2006-02-27 15:02 ` Takashi Iwai
2006-02-28 8:51 ` Otavio Salvador
2006-02-28 10:54 ` Takashi Iwai
2006-02-28 20:28 ` Otavio Salvador
2006-03-01 10:29 ` Takashi Iwai
2006-03-02 2:24 ` Otavio Salvador
2006-03-03 18:11 ` Takashi Iwai
2006-03-04 5:29 ` Otavio Salvador
2006-03-04 14:51 ` Adrian Bunk
2006-03-06 14:16 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200603120311.09105.kernel-stuff@comcast.net \
--to=kernel-stuff@comcast.net \
--cc=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=otavio@debian.org \
--cc=tiwai@suse.de \
--cc=umar@compsci.cas.vanderbilt.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox