From: mchehab@infradead.org
To: linux-kernel@vger.kernel.org
Cc: linux-dvb-maintainer@linuxtv.org,
Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@infradead.org>
Subject: [PATCH 025/141] V4L/DVB (3427): audmode and rxsubchans fixes (VIDIOC_G/S_TUNER)
Date: Mon, 20 Mar 2006 12:08:41 -0300 [thread overview]
Message-ID: <20060320150841.PS192117000025@infradead.org> (raw)
In-Reply-To: <20060320150819.PS760228000000@infradead.org>
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: 1138043469 -0200
- Audmode and rxsubchans fixes in msp3400, tuner, tvaudio and cx25840.
- msp3400 cleanups
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index c66c2c1..3acd587 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -753,6 +753,7 @@ static int cx25840_command(struct i2c_cl
memset(input, 0, sizeof(*input));
input->index = state->aud_input;
+ input->capability = V4L2_AUDCAP_STEREO;
break;
}
@@ -763,7 +764,6 @@ static int cx25840_command(struct i2c_cl
case VIDIOC_G_TUNER:
{
u8 mode = cx25840_read(client, 0x804);
- u8 pref = cx25840_read(client, 0x809) & 0xf;
u8 vpres = cx25840_read(client, 0x80a) & 0x10;
int val = 0;
@@ -783,44 +783,49 @@ static int cx25840_command(struct i2c_cl
val |= V4L2_TUNER_SUB_MONO;
if (mode == 2 || mode == 4)
- val |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+ val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
if (mode & 0x10)
val |= V4L2_TUNER_SUB_SAP;
vt->rxsubchans = val;
-
- switch (pref) {
- case 0:
- vt->audmode = V4L2_TUNER_MODE_MONO;
- break;
- case 1:
- case 2:
- vt->audmode = V4L2_TUNER_MODE_LANG2;
- break;
- case 4:
- default:
- vt->audmode = V4L2_TUNER_MODE_STEREO;
- }
+ vt->audmode = state->audmode;
break;
}
case VIDIOC_S_TUNER:
+ if (state->radio)
+ break;
+
switch (vt->audmode) {
case V4L2_TUNER_MODE_MONO:
- case V4L2_TUNER_MODE_LANG1:
- /* Force PREF_MODE to MONO */
+ /* mono -> mono
+ stereo -> mono
+ bilingual -> lang1 */
cx25840_and_or(client, 0x809, ~0xf, 0x00);
break;
- case V4L2_TUNER_MODE_STEREO:
- /* Force PREF_MODE to STEREO */
+ case V4L2_TUNER_MODE_LANG1:
+ /* mono -> mono
+ stereo -> stereo
+ bilingual -> lang1 */
cx25840_and_or(client, 0x809, ~0xf, 0x04);
break;
+ case V4L2_TUNER_MODE_STEREO:
+ /* mono -> mono
+ stereo -> stereo
+ bilingual -> lang1/lang2 */
+ cx25840_and_or(client, 0x809, ~0xf, 0x07);
+ break;
case V4L2_TUNER_MODE_LANG2:
- /* Force PREF_MODE to LANG2 */
+ /* mono -> mono
+ stereo ->stereo
+ bilingual -> lang2 */
cx25840_and_or(client, 0x809, ~0xf, 0x01);
break;
+ default:
+ return -EINVAL;
}
+ state->audmode = vt->audmode;
break;
case VIDIOC_G_FMT:
@@ -901,6 +906,7 @@ static int cx25840_detect_client(struct
state->aud_input = CX25840_AUDIO8;
state->audclk_freq = 48000;
state->pvr150_workaround = 0;
+ state->audmode = V4L2_TUNER_MODE_LANG1;
cx25840_initialize(client, 1);
diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h
diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h
index fd22f30..dd70664 100644
--- a/drivers/media/video/cx25840/cx25840.h
+++ b/drivers/media/video/cx25840/cx25840.h
@@ -78,6 +78,7 @@ struct cx25840_state {
enum cx25840_video_input vid_input;
enum cx25840_audio_input aud_input;
u32 audclk_freq;
+ int audmode;
};
/* ----------------------------------------------------------------------- */
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 994c340..11ea976 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -411,9 +411,9 @@ static int msp_mode_v4l2_to_v4l1(int rxs
if (rxsubchans & V4L2_TUNER_SUB_STEREO)
mode |= VIDEO_SOUND_STEREO;
if (rxsubchans & V4L2_TUNER_SUB_LANG2)
- mode |= VIDEO_SOUND_LANG2;
+ mode |= VIDEO_SOUND_LANG2 | VIDEO_SOUND_STEREO;
if (rxsubchans & V4L2_TUNER_SUB_LANG1)
- mode |= VIDEO_SOUND_LANG1;
+ mode |= VIDEO_SOUND_LANG1 | VIDEO_SOUND_STEREO;
if (mode == 0)
mode |= VIDEO_SOUND_MONO;
return mode;
@@ -430,21 +430,6 @@ static int msp_mode_v4l1_to_v4l2(int mod
return V4L2_TUNER_MODE_MONO;
}
-static void msp_any_detect_stereo(struct i2c_client *client)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (state->opmode) {
- case OPMODE_MANUAL:
- case OPMODE_AUTODETECT:
- autodetect_stereo(client);
- break;
- case OPMODE_AUTOSELECT:
- msp34xxg_detect_stereo(client);
- break;
- }
-}
-
static struct v4l2_queryctrl msp_qctrl_std[] = {
{
.id = V4L2_CID_AUDIO_VOLUME,
@@ -506,22 +491,6 @@ static struct v4l2_queryctrl msp_qctrl_s
};
-static void msp_any_set_audmode(struct i2c_client *client, int audmode)
-{
- struct msp_state *state = i2c_get_clientdata(client);
-
- switch (state->opmode) {
- case OPMODE_MANUAL:
- case OPMODE_AUTODETECT:
- state->watch_stereo = 0;
- msp3400c_setstereo(client, audmode);
- break;
- case OPMODE_AUTOSELECT:
- msp34xxg_set_audmode(client, audmode);
- break;
- }
-}
-
static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
{
struct msp_state *state = i2c_get_clientdata(client);
@@ -656,7 +625,7 @@ static int msp_command(struct i2c_client
msp_set_scart(client, scart, 0);
msp_write_dsp(client, 0x000d, 0x1900);
if (state->opmode != OPMODE_AUTOSELECT)
- msp3400c_setstereo(client, state->audmode);
+ msp_set_audmode(client);
}
msp_wake_thread(client);
break;
@@ -670,8 +639,8 @@ static int msp_command(struct i2c_client
switch (state->opmode) {
case OPMODE_MANUAL:
/* set msp3400 to FM radio mode */
- msp3400c_setmode(client, MSP_MODE_FM_RADIO);
- msp3400c_setcarrier(client, MSP_CARRIER(10.7),
+ msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
+ msp3400c_set_carrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
msp_set_audio(client);
break;
@@ -705,7 +674,7 @@ static int msp_command(struct i2c_client
if (state->radio)
break;
if (state->opmode == OPMODE_AUTOSELECT)
- msp_any_detect_stereo(client);
+ msp_detect_stereo(client);
va->mode = msp_mode_v4l2_to_v4l1(state->rxsubchans);
break;
}
@@ -721,8 +690,9 @@ static int msp_command(struct i2c_client
state->treble = va->treble;
msp_set_audio(client);
- if (va->mode != 0 && state->radio == 0)
- msp_any_set_audmode(client, msp_mode_v4l1_to_v4l2(va->mode));
+ if (va->mode != 0 && state->radio == 0) {
+ state->audmode = msp_mode_v4l1_to_v4l2(va->mode);
+ }
break;
}
@@ -864,7 +834,7 @@ static int msp_command(struct i2c_client
msp_set_scart(client, scart, 0);
msp_write_dsp(client, 0x000d, 0x1900);
}
- msp_any_set_audmode(client, state->audmode);
+ msp_set_audmode(client);
msp_wake_thread(client);
break;
}
@@ -876,7 +846,7 @@ static int msp_command(struct i2c_client
if (state->radio)
break;
if (state->opmode == OPMODE_AUTOSELECT)
- msp_any_detect_stereo(client);
+ msp_detect_stereo(client);
vt->audmode = state->audmode;
vt->rxsubchans = state->rxsubchans;
vt->capability = V4L2_TUNER_CAP_STEREO |
@@ -890,8 +860,9 @@ static int msp_command(struct i2c_client
if (state->radio) /* TODO: add mono/stereo support for radio */
break;
+ state->audmode = vt->audmode;
/* only set audmode */
- msp_any_set_audmode(client, vt->audmode);
+ msp_set_audmode(client);
break;
}
@@ -981,7 +952,7 @@ static int msp_command(struct i2c_client
const char *p;
if (state->opmode == OPMODE_AUTOSELECT)
- msp_any_detect_stereo(client);
+ msp_detect_stereo(client);
v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n",
client->name, state->rev1, state->rev2);
v4l_info(client, "Audio: volume %d%s\n",
@@ -1082,7 +1053,7 @@ static int msp_attach(struct i2c_adapter
memset(state, 0, sizeof(*state));
state->v4l2_std = V4L2_STD_NTSC;
- state->audmode = V4L2_TUNER_MODE_STEREO;
+ state->audmode = V4L2_TUNER_MODE_LANG1;
state->volume = 58880; /* 0db gain */
state->balance = 32768; /* 0db gain */
state->bass = 32768;
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 3235a15..c4668f4 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -109,7 +109,7 @@ static struct msp3400c_init_data_dem {
{-2, -8, -10, 10, 50, 86},
{-4, -12, -9, 23, 79, 126},
MSP_CARRIER(6.5), MSP_CARRIER(6.5),
- 0x00c6, 0x0140, 0x0120, 0x7c03
+ 0x00c6, 0x0140, 0x0120, 0x7c00
},
};
@@ -154,53 +154,60 @@ const char *msp_standard_std_name(int st
return "unknown";
}
-void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2)
+void msp_set_source(struct i2c_client *client, u16 src)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ if (msp_dolby) {
+ msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */
+ msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */
+ } else {
+ msp_write_dsp(client, 0x0008, src);
+ msp_write_dsp(client, 0x0009, src);
+ }
+ msp_write_dsp(client, 0x000a, src);
+ msp_write_dsp(client, 0x000b, src);
+ msp_write_dsp(client, 0x000c, src);
+ if (state->has_scart23_in_scart2_out)
+ msp_write_dsp(client, 0x0041, src);
+}
+
+void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2)
{
msp_write_dem(client, 0x0093, cdo1 & 0xfff);
msp_write_dem(client, 0x009b, cdo1 >> 12);
msp_write_dem(client, 0x00a3, cdo2 & 0xfff);
msp_write_dem(client, 0x00ab, cdo2 >> 12);
- msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/
+ msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */
}
-void msp3400c_setmode(struct i2c_client *client, int type)
+void msp3400c_set_mode(struct i2c_client *client, int mode)
{
struct msp_state *state = i2c_get_clientdata(client);
+ struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode];
int i;
- v4l_dbg(1, msp_debug, client, "setmode: %d\n", type);
- state->mode = type;
+ v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode);
+ state->mode = mode;
state->rxsubchans = V4L2_TUNER_SUB_MONO;
- msp_write_dem(client, 0x00bb, msp3400c_init_data[type].ad_cv);
+ msp_write_dem(client, 0x00bb, data->ad_cv);
for (i = 5; i >= 0; i--) /* fir 1 */
- msp_write_dem(client, 0x0001, msp3400c_init_data[type].fir1[i]);
+ msp_write_dem(client, 0x0001, data->fir1[i]);
msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */
msp_write_dem(client, 0x0005, 0x0040);
msp_write_dem(client, 0x0005, 0x0000);
for (i = 5; i >= 0; i--)
- msp_write_dem(client, 0x0005, msp3400c_init_data[type].fir2[i]);
+ msp_write_dem(client, 0x0005, data->fir2[i]);
- msp_write_dem(client, 0x0083, msp3400c_init_data[type].mode_reg);
+ msp_write_dem(client, 0x0083, data->mode_reg);
- msp3400c_setcarrier(client, msp3400c_init_data[type].cdo1,
- msp3400c_init_data[type].cdo2);
+ msp3400c_set_carrier(client, data->cdo1, data->cdo2);
- msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/
-
- if (msp_dolby) {
- msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */
- msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */
- msp_write_dsp(client, 0x000b, msp3400c_init_data[type].dsp_src);
- } else {
- msp_write_dsp(client, 0x0008, msp3400c_init_data[type].dsp_src);
- msp_write_dsp(client, 0x0009, msp3400c_init_data[type].dsp_src);
- msp_write_dsp(client, 0x000b, msp3400c_init_data[type].dsp_src);
- }
- msp_write_dsp(client, 0x000a, msp3400c_init_data[type].dsp_src);
- msp_write_dsp(client, 0x000e, msp3400c_init_data[type].dsp_matrix);
+ msp_set_source(client, data->dsp_src);
+ msp_write_dsp(client, 0x000e, data->dsp_matrix);
if (state->has_nicam) {
/* nicam prescale */
@@ -208,29 +215,31 @@ void msp3400c_setmode(struct i2c_client
}
}
-/* turn on/off nicam + stereo */
-void msp3400c_setstereo(struct i2c_client *client, int audmode)
+/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
+ nor do they support stereo BTSC. */
+void msp3400c_set_audmode(struct i2c_client *client)
{
static char *strmode[] = { "mono", "stereo", "lang2", "lang1" };
struct msp_state *state = i2c_get_clientdata(client);
- int nicam = 0; /* channel source: FM/AM or nicam */
- int src = 0;
+ char *modestr = (state->audmode >= 0 && state->audmode < 4) ?
+ strmode[state->audmode] : "unknown";
+ int src = 0; /* channel source: FM/AM, nicam or SCART */
if (state->opmode == OPMODE_AUTOSELECT) {
/* this method would break everything, let's make sure
* it's never called
*/
- v4l_dbg(1, msp_debug, client, "setstereo called with mode=%d instead of set_source (ignored)\n",
- audmode);
+ v4l_dbg(1, msp_debug, client,
+ "set_audmode called with mode=%d instead of set_source (ignored)\n",
+ state->audmode);
return;
}
/* switch demodulator */
switch (state->mode) {
case MSP_MODE_FM_TERRA:
- v4l_dbg(1, msp_debug, client, "FM setstereo: %s\n", strmode[audmode]);
- msp3400c_setcarrier(client, state->second, state->main);
- switch (audmode) {
+ v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr);
+ switch (state->audmode) {
case V4L2_TUNER_MODE_STEREO:
msp_write_dsp(client, 0x000e, 0x3001);
break;
@@ -242,50 +251,49 @@ void msp3400c_setstereo(struct i2c_clien
}
break;
case MSP_MODE_FM_SAT:
- v4l_dbg(1, msp_debug, client, "SAT setstereo: %s\n", strmode[audmode]);
- switch (audmode) {
+ v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr);
+ switch (state->audmode) {
case V4L2_TUNER_MODE_MONO:
- msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
+ msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
break;
case V4L2_TUNER_MODE_STEREO:
- msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
+ msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
break;
case V4L2_TUNER_MODE_LANG1:
- msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
+ msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
break;
case V4L2_TUNER_MODE_LANG2:
- msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
+ msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
break;
}
break;
case MSP_MODE_FM_NICAM1:
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
- v4l_dbg(1, msp_debug, client, "NICAM setstereo: %s\n",strmode[audmode]);
- msp3400c_setcarrier(client,state->second,state->main);
+ v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr);
+ msp3400c_set_carrier(client, state->second, state->main);
if (state->nicam_on)
- nicam=0x0100;
+ src = 0x0100; /* NICAM */
break;
case MSP_MODE_BTSC:
- v4l_dbg(1, msp_debug, client, "BTSC setstereo: %s\n",strmode[audmode]);
- nicam=0x0300;
+ v4l_dbg(1, msp_debug, client, "BTSC set_audmode: %s\n",modestr);
break;
case MSP_MODE_EXTERN:
- v4l_dbg(1, msp_debug, client, "extern setstereo: %s\n",strmode[audmode]);
- nicam = 0x0200;
+ v4l_dbg(1, msp_debug, client, "extern set_audmode: %s\n",modestr);
+ src = 0x0200; /* SCART */
break;
case MSP_MODE_FM_RADIO:
- v4l_dbg(1, msp_debug, client, "FM-Radio setstereo: %s\n",strmode[audmode]);
+ v4l_dbg(1, msp_debug, client, "FM-Radio set_audmode: %s\n",modestr);
break;
default:
- v4l_dbg(1, msp_debug, client, "mono setstereo\n");
+ v4l_dbg(1, msp_debug, client, "mono set_audmode\n");
return;
}
/* switch audio */
- switch (audmode) {
+ switch (state->audmode) {
case V4L2_TUNER_MODE_STEREO:
- src = 0x0020 | nicam;
+ src |= 0x0020;
break;
case V4L2_TUNER_MODE_MONO:
if (state->mode == MSP_MODE_AM_NICAM) {
@@ -296,29 +304,22 @@ void msp3400c_setstereo(struct i2c_clien
src = 0x0200;
break;
}
+ if (state->rxsubchans & V4L2_TUNER_SUB_STEREO)
+ src = 0x0030;
+ break;
case V4L2_TUNER_MODE_LANG1:
- src = 0x0000 | nicam;
+ /* switch to stereo for stereo transmission, otherwise
+ keep first language */
+ if (state->rxsubchans & V4L2_TUNER_SUB_STEREO)
+ src |= 0x0020;
break;
case V4L2_TUNER_MODE_LANG2:
- src = 0x0010 | nicam;
+ src |= 0x0010;
break;
}
- v4l_dbg(1, msp_debug, client, "setstereo final source/matrix = 0x%x\n", src);
+ v4l_dbg(1, msp_debug, client, "set_audmode final source/matrix = 0x%x\n", src);
- if (msp_dolby) {
- msp_write_dsp(client, 0x0008, 0x0520);
- msp_write_dsp(client, 0x0009, 0x0620);
- msp_write_dsp(client, 0x000a, src);
- msp_write_dsp(client, 0x000b, src);
- } else {
- msp_write_dsp(client, 0x0008, src);
- msp_write_dsp(client, 0x0009, src);
- msp_write_dsp(client, 0x000a, src);
- msp_write_dsp(client, 0x000b, src);
- msp_write_dsp(client, 0x000c, src);
- if (state->has_scart23_in_scart2_out)
- msp_write_dsp(client, 0x0041, src);
- }
+ msp_set_source(client, src);
}
static void msp3400c_print_mode(struct i2c_client *client)
@@ -346,12 +347,12 @@ static void msp3400c_print_mode(struct i
/* ----------------------------------------------------------------------- */
-int autodetect_stereo(struct i2c_client *client)
+static int msp3400c_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
int val;
int rxsubchans = state->rxsubchans;
- int newnicam = state->nicam_on;
+ int newnicam = state->nicam_on;
int update = 0;
switch (state->mode) {
@@ -361,7 +362,7 @@ int autodetect_stereo(struct i2c_client
val -= 65536;
v4l_dbg(2, msp_debug, client, "stereo detect register: %d\n", val);
if (val > 4096) {
- rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
+ rxsubchans = V4L2_TUNER_SUB_STEREO;
} else if (val < -4096) {
rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
} else {
@@ -385,14 +386,11 @@ int autodetect_stereo(struct i2c_client
break;
case 1:
case 9:
- rxsubchans = V4L2_TUNER_SUB_MONO
- | V4L2_TUNER_SUB_LANG1;
+ rxsubchans = V4L2_TUNER_SUB_MONO;
break;
case 2:
case 10:
- rxsubchans = V4L2_TUNER_SUB_MONO
- | V4L2_TUNER_SUB_LANG1
- | V4L2_TUNER_SUB_LANG2;
+ rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
break;
default:
rxsubchans = V4L2_TUNER_SUB_MONO;
@@ -404,30 +402,17 @@ int autodetect_stereo(struct i2c_client
rxsubchans = V4L2_TUNER_SUB_MONO;
}
break;
- case MSP_MODE_BTSC:
- val = msp_read_dem(client, 0x200);
- v4l_dbg(2, msp_debug, client, "status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
- val,
- (val & 0x0002) ? "no" : "yes",
- (val & 0x0004) ? "no" : "yes",
- (val & 0x0040) ? "stereo" : "mono",
- (val & 0x0080) ? ", nicam 2nd mono" : "",
- (val & 0x0100) ? ", bilingual/SAP" : "");
- rxsubchans = V4L2_TUNER_SUB_MONO;
- if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO;
- if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1;
- break;
}
if (rxsubchans != state->rxsubchans) {
update = 1;
- v4l_dbg(1, msp_debug, client, "watch: rxsubchans %d => %d\n",
- state->rxsubchans,rxsubchans);
+ v4l_dbg(1, msp_debug, client, "watch: rxsubchans %02x => %02x\n",
+ state->rxsubchans, rxsubchans);
state->rxsubchans = rxsubchans;
}
if (newnicam != state->nicam_on) {
update = 1;
v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n",
- state->nicam_on,newnicam);
+ state->nicam_on, newnicam);
state->nicam_on = newnicam;
}
return update;
@@ -442,13 +427,8 @@ static void watch_stereo(struct i2c_clie
{
struct msp_state *state = i2c_get_clientdata(client);
- if (autodetect_stereo(client)) {
- if (state->rxsubchans & V4L2_TUNER_SUB_STEREO)
- msp3400c_setstereo(client, V4L2_TUNER_MODE_STEREO);
- else if (state->rxsubchans & V4L2_TUNER_SUB_LANG1)
- msp3400c_setstereo(client, V4L2_TUNER_MODE_LANG1);
- else
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
+ if (msp3400c_detect_stereo(client)) {
+ msp3400c_set_audmode(client);
}
if (msp_once)
@@ -460,7 +440,7 @@ int msp3400c_thread(void *data)
struct i2c_client *client = data;
struct msp_state *state = i2c_get_clientdata(client);
struct msp3400c_carrier_detect *cd;
- int count, max1,max2,val1,val2, val,this;
+ int count, max1, max2, val1, val2, val, this;
v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n");
@@ -470,7 +450,7 @@ int msp3400c_thread(void *data)
v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n");
restart:
- v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
+ v4l_dbg(2, msp_debug, client, "thread: restart scan\n");
state->restart = 0;
if (kthread_should_stop())
break;
@@ -484,13 +464,14 @@ int msp3400c_thread(void *data)
/* mute */
msp_set_mute(client);
- msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ );
+ msp3400c_set_mode(client, MSP_MODE_AM_DETECT /* +1 */ );
val1 = val2 = 0;
max1 = max2 = -1;
state->watch_stereo = 0;
+ state->nicam_on = 0;
/* some time for the tuner to sync */
- if (msp_sleep(state,200))
+ if (msp_sleep(state, 200))
goto restart;
/* carrier detect pass #1 -- main carrier */
@@ -505,7 +486,7 @@ int msp3400c_thread(void *data)
}
for (this = 0; this < count; this++) {
- msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
+ msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo);
if (msp_sleep(state,100))
goto restart;
val = msp_read_dsp(client, 0x1b);
@@ -541,7 +522,7 @@ int msp3400c_thread(void *data)
max2 = 0;
}
for (this = 0; this < count; this++) {
- msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
+ msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo);
if (msp_sleep(state,100))
goto restart;
val = msp_read_dsp(client, 0x1b);
@@ -553,22 +534,20 @@ int msp3400c_thread(void *data)
}
/* program the msp3400 according to the results */
- state->main = msp3400c_carrier_detect_main[max1].cdo;
+ state->main = msp3400c_carrier_detect_main[max1].cdo;
switch (max1) {
case 1: /* 5.5 */
if (max2 == 0) {
/* B/G FM-stereo */
state->second = msp3400c_carrier_detect_55[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
+ msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
state->watch_stereo = 1;
} else if (max2 == 1 && state->has_nicam) {
/* B/G NICAM */
state->second = msp3400c_carrier_detect_55[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
+ msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
+ msp3400c_set_carrier(client, state->second, state->main);
state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
state->watch_stereo = 1;
} else {
goto no_second;
@@ -577,35 +556,31 @@ int msp3400c_thread(void *data)
case 2: /* 6.0 */
/* PAL I NICAM */
state->second = MSP_CARRIER(6.552);
- msp3400c_setmode(client, MSP_MODE_FM_NICAM2);
+ msp3400c_set_mode(client, MSP_MODE_FM_NICAM2);
+ msp3400c_set_carrier(client, state->second, state->main);
state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
state->watch_stereo = 1;
break;
case 3: /* 6.5 */
if (max2 == 1 || max2 == 2) {
/* D/K FM-stereo */
state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
+ msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
state->watch_stereo = 1;
} else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) {
/* L NICAM or AM-mono */
state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_AM_NICAM);
- state->nicam_on = 0;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
- msp3400c_setcarrier(client, state->second, state->main);
+ msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
+ msp3400c_set_carrier(client, state->second, state->main);
/* volume prescale for SCART (AM mono input) */
msp_write_dsp(client, 0x000d, 0x1900);
state->watch_stereo = 1;
} else if (max2 == 0 && state->has_nicam) {
/* D/K NICAM */
state->second = msp3400c_carrier_detect_65[max2].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_NICAM1);
+ msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
+ msp3400c_set_carrier(client, state->second, state->main);
state->nicam_on = 1;
- msp3400c_setcarrier(client, state->second, state->main);
state->watch_stereo = 1;
} else {
goto no_second;
@@ -615,23 +590,25 @@ int msp3400c_thread(void *data)
default:
no_second:
state->second = msp3400c_carrier_detect_main[max1].cdo;
- msp3400c_setmode(client, MSP_MODE_FM_TERRA);
- state->nicam_on = 0;
- msp3400c_setcarrier(client, state->second, state->main);
+ msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
+ msp3400c_set_carrier(client, state->second, state->main);
state->rxsubchans = V4L2_TUNER_SUB_MONO;
- msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
break;
}
/* unmute */
msp_set_audio(client);
+ msp3400c_set_audmode(client);
if (msp_debug)
msp3400c_print_mode(client);
- /* monitor tv audio mode */
+ /* monitor tv audio mode, the first time don't wait
+ so long to get a quick stereo/bilingual result */
+ if (msp_sleep(state, 1000))
+ goto restart;
while (state->watch_stereo) {
- if (msp_sleep(state,5000))
+ if (msp_sleep(state, 5000))
goto restart;
watch_stereo(client);
}
@@ -655,7 +632,7 @@ int msp3410d_thread(void *data)
v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n");
restart:
- v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
+ v4l_dbg(2, msp_debug, client, "thread: restart scan\n");
state->restart = 0;
if (kthread_should_stop())
break;
@@ -680,9 +657,10 @@ int msp3410d_thread(void *data)
else
std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
state->watch_stereo = 0;
+ state->nicam_on = 0;
if (msp_debug)
- v4l_dbg(1, msp_debug, client, "setting standard: %s (0x%04x)\n",
+ v4l_dbg(2, msp_debug, client, "setting standard: %s (0x%04x)\n",
msp_standard_std_name(std), std);
if (std != 1) {
@@ -699,7 +677,7 @@ int msp3410d_thread(void *data)
val = msp_read_dem(client, 0x7e);
if (val < 0x07ff)
break;
- v4l_dbg(1, msp_debug, client, "detection still in progress\n");
+ v4l_dbg(2, msp_debug, client, "detection still in progress\n");
}
}
for (i = 0; msp_stdlist[i].name != NULL; i++)
@@ -738,46 +716,34 @@ int msp3410d_thread(void *data)
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
state->nicam_on = 1;
state->watch_stereo = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO);
break;
case 0x0009:
state->mode = MSP_MODE_AM_NICAM;
state->rxsubchans = V4L2_TUNER_SUB_MONO;
state->nicam_on = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_MONO);
state->watch_stereo = 1;
break;
case 0x0020: /* BTSC */
- /* just turn on stereo */
+ /* The pre-'G' models only have BTSC-mono */
state->mode = MSP_MODE_BTSC;
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->nicam_on = 0;
- state->watch_stereo = 1;
- msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO);
+ state->rxsubchans = V4L2_TUNER_SUB_MONO;
break;
case 0x0040: /* FM radio */
state->mode = MSP_MODE_FM_RADIO;
state->rxsubchans = V4L2_TUNER_SUB_STEREO;
- state->nicam_on = 0;
- state->watch_stereo = 0;
/* not needed in theory if we have radio, but
short programming enables carrier mute */
- msp3400c_setmode(client, MSP_MODE_FM_RADIO);
- msp3400c_setcarrier(client, MSP_CARRIER(10.7),
+ msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
+ msp3400c_set_carrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
- /* scart routing */
+ /* scart routing (this doesn't belong here I think) */
msp_set_scart(client,SCART_IN2,0);
- /* msp34xx does radio decoding */
- msp_write_dsp(client, 0x08, 0x0020);
- msp_write_dsp(client, 0x09, 0x0020);
- msp_write_dsp(client, 0x0b, 0x0020);
break;
case 0x0003:
case 0x0004:
case 0x0005:
state->mode = MSP_MODE_FM_TERRA;
state->rxsubchans = V4L2_TUNER_SUB_MONO;
- state->nicam_on = 0;
state->watch_stereo = 1;
break;
}
@@ -788,11 +754,16 @@ int msp3410d_thread(void *data)
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
- /* monitor tv audio mode */
+ msp3400c_set_audmode(client);
+
+ /* monitor tv audio mode, the first time don't wait
+ so long to get a quick stereo/bilingual result */
+ if (msp_sleep(state, 1000))
+ goto restart;
while (state->watch_stereo) {
- if (msp_sleep(state,5000))
- goto restart;
watch_stereo(client);
+ if (msp_sleep(state, 5000))
+ goto restart;
}
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
@@ -810,7 +781,7 @@ int msp3410d_thread(void *data)
* the value for source is the same as bit 15:8 of DSP registers 0x08,
* 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
*
- * this function replaces msp3400c_setstereo
+ * this function replaces msp3400c_set_audmode
*/
static void msp34xxg_set_source(struct i2c_client *client, int source)
{
@@ -823,12 +794,7 @@ static void msp34xxg_set_source(struct i
int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20);
v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value);
- /* Loudspeaker Output */
- msp_write_dsp(client, 0x08, value);
- /* SCART1 DA Output */
- msp_write_dsp(client, 0x0a, value);
- /* Quasi-peak detector */
- msp_write_dsp(client, 0x0c, value);
+ msp_set_source(client, value);
/*
* set identification threshold. Personally, I
* I set it to a higher value that the default
@@ -945,13 +911,14 @@ int msp34xxg_thread(void *data)
if (msp_write_dsp(client, 0x13, state->acb))
return -1;
- msp_write_dem(client, 0x40, state->i2s_mode);
+ if (state->has_i2s_conf)
+ msp_write_dem(client, 0x40, state->i2s_mode);
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
-void msp34xxg_detect_stereo(struct i2c_client *client)
+static void msp34xxg_detect_stereo(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
@@ -961,11 +928,11 @@ void msp34xxg_detect_stereo(struct i2c_c
state->rxsubchans = 0;
if (is_stereo)
- state->rxsubchans |= V4L2_TUNER_SUB_STEREO;
+ state->rxsubchans = V4L2_TUNER_SUB_STEREO;
else
- state->rxsubchans |= V4L2_TUNER_SUB_MONO;
+ state->rxsubchans = V4L2_TUNER_SUB_MONO;
if (is_bilingual) {
- state->rxsubchans |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+ state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
/* I'm supposed to check whether it's SAP or not
* and set only LANG2/SAP in this case. Yet, the MSP
* does a lot of work to hide this and handle everything
@@ -977,12 +944,12 @@ void msp34xxg_detect_stereo(struct i2c_c
status, is_stereo, is_bilingual, state->rxsubchans);
}
-void msp34xxg_set_audmode(struct i2c_client *client, int audmode)
+void msp34xxg_set_audmode(struct i2c_client *client)
{
struct msp_state *state = i2c_get_clientdata(client);
int source;
- switch (audmode) {
+ switch (state->audmode) {
case V4L2_TUNER_MODE_MONO:
source = 0; /* mono only */
break;
@@ -997,11 +964,40 @@ void msp34xxg_set_audmode(struct i2c_cli
source = 4; /* stereo or B */
break;
default:
- audmode = 0;
source = 1;
break;
}
- state->audmode = audmode;
msp34xxg_set_source(client, source);
}
+void msp_set_audmode(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_AUTODETECT:
+ state->watch_stereo = 0;
+ msp3400c_set_audmode(client);
+ break;
+ case OPMODE_AUTOSELECT:
+ msp34xxg_set_audmode(client);
+ break;
+ }
+}
+
+void msp_detect_stereo(struct i2c_client *client)
+{
+ struct msp_state *state = i2c_get_clientdata(client);
+
+ switch (state->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_AUTODETECT:
+ msp3400c_detect_stereo(client);
+ break;
+ case OPMODE_AUTOSELECT:
+ msp34xxg_detect_stereo(client);
+ break;
+ }
+}
+
diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400.h
diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400.h
index a9ac57d..4182830 100644
--- a/drivers/media/video/msp3400.h
+++ b/drivers/media/video/msp3400.h
@@ -104,14 +104,13 @@ int msp_sleep(struct msp_state *state, i
/* msp3400-kthreads.c */
const char *msp_standard_std_name(int std);
-void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2);
-void msp3400c_setmode(struct i2c_client *client, int type);
-void msp3400c_setstereo(struct i2c_client *client, int mode);
-int autodetect_stereo(struct i2c_client *client);
+void msp_set_source(struct i2c_client *client, u16 src);
+void msp_set_audmode(struct i2c_client *client);
+void msp_detect_stereo(struct i2c_client *client);
int msp3400c_thread(void *data);
int msp3410d_thread(void *data);
int msp34xxg_thread(void *data);
-void msp34xxg_detect_stereo(struct i2c_client *client);
-void msp34xxg_set_audmode(struct i2c_client *client, int audmode);
+void msp3400c_set_mode(struct i2c_client *client, int mode);
+void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2);
#endif /* MSP3400_H */
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 2995b22..af3e7bb 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -398,15 +398,16 @@ static void tuner_status(struct i2c_clie
tuner_info("Tuner mode: %s\n", p);
tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction);
tuner_info("Standard: 0x%08llx\n", t->std);
- if (t->mode == V4L2_TUNER_RADIO) {
- if (t->has_signal) {
- tuner_info("Signal strength: %d\n", t->has_signal(client));
- }
- if (t->is_stereo) {
- tuner_info("Stereo: %s\n", t->is_stereo(client) ? "yes" : "no");
- }
+ if (t->mode != V4L2_TUNER_RADIO)
+ return;
+ if (t->has_signal) {
+ tuner_info("Signal strength: %d\n", t->has_signal(client));
+ }
+ if (t->is_stereo) {
+ tuner_info("Stereo: %s\n", t->is_stereo(client) ? "yes" : "no");
}
}
+
/* ---------------------------------------------------------------------- */
/* static var Used only in tuner_attach and tuner_probe */
@@ -737,33 +738,29 @@ static int tuner_command(struct i2c_clie
return 0;
switch_v4l2();
- if (V4L2_TUNER_RADIO == t->mode) {
-
- if (t->has_signal)
- tuner->signal = t->has_signal(client);
-
- if (t->is_stereo) {
- if (t->is_stereo(client)) {
- tuner->rxsubchans =
- V4L2_TUNER_SUB_STEREO |
- V4L2_TUNER_SUB_MONO;
- } else {
- tuner->rxsubchans =
- V4L2_TUNER_SUB_MONO;
- }
- }
-
- tuner->capability |=
- V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
-
- tuner->audmode = t->audmode;
-
- tuner->rangelow = radio_range[0] * 16000;
- tuner->rangehigh = radio_range[1] * 16000;
- } else {
+ tuner->type = t->mode;
+ if (t->mode != V4L2_TUNER_RADIO) {
tuner->rangelow = tv_range[0] * 16;
tuner->rangehigh = tv_range[1] * 16;
+ break;
}
+
+ /* radio mode */
+ if (t->has_signal)
+ tuner->signal = t->has_signal(client);
+
+ tuner->rxsubchans =
+ V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+ if (t->is_stereo) {
+ tuner->rxsubchans = t->is_stereo(client) ?
+ V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
+ }
+
+ tuner->capability |=
+ V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+ tuner->audmode = t->audmode;
+ tuner->rangelow = radio_range[0] * 16000;
+ tuner->rangehigh = radio_range[1] * 16000;
break;
}
case VIDIOC_S_TUNER:
@@ -775,10 +772,11 @@ static int tuner_command(struct i2c_clie
switch_v4l2();
- if (V4L2_TUNER_RADIO == t->mode) {
- t->audmode = tuner->audmode;
- set_radio_freq(client, t->radio_freq);
- }
+ /* do nothing unless we're a radio tuner */
+ if (t->mode != V4L2_TUNER_RADIO)
+ break;
+ t->audmode = tuner->audmode;
+ set_radio_freq(client, t->radio_freq);
break;
}
case VIDIOC_LOG_STATUS:
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index c8e5ad0..4efb01b 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -130,6 +130,7 @@ struct CHIPSTATE {
struct timer_list wt;
int done;
int watch_stereo;
+ int audmode;
};
/* ---------------------------------------------------------------------- */
@@ -1514,6 +1515,7 @@ static int chip_attach(struct i2c_adapte
chip->type = desc-chiplist;
chip->shadow.count = desc->registers+1;
chip->prevmode = -1;
+ chip->audmode = V4L2_TUNER_MODE_LANG1;
/* register */
i2c_attach_client(&chip->c);
@@ -1671,6 +1673,8 @@ static int chip_command(struct i2c_clien
struct v4l2_tuner *vt = arg;
int mode = 0;
+ if (chip->radio)
+ break;
switch (vt->audmode) {
case V4L2_TUNER_MODE_MONO:
mode = VIDEO_SOUND_MONO;
@@ -1685,8 +1689,9 @@ static int chip_command(struct i2c_clien
mode = VIDEO_SOUND_LANG2;
break;
default:
- break;
+ return -EINVAL;
}
+ chip->audmode = vt->audmode;
if (desc->setmode && mode) {
chip->watch_stereo = 0;
@@ -1704,7 +1709,7 @@ static int chip_command(struct i2c_clien
if (chip->radio)
break;
- vt->audmode = 0;
+ vt->audmode = chip->audmode;
vt->rxsubchans = 0;
vt->capability = V4L2_TUNER_CAP_STEREO |
V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
@@ -1716,19 +1721,12 @@ static int chip_command(struct i2c_clien
vt->rxsubchans |= V4L2_TUNER_SUB_MONO;
if (mode & VIDEO_SOUND_STEREO)
vt->rxsubchans |= V4L2_TUNER_SUB_STEREO;
+ /* Note: for SAP it should be mono/lang2 or stereo/lang2.
+ When this module is converted fully to v4l2, then this
+ should change for those chips that can detect SAP. */
if (mode & VIDEO_SOUND_LANG1)
- vt->rxsubchans |= V4L2_TUNER_SUB_LANG1 |
- V4L2_TUNER_SUB_LANG2;
-
- mode = chip->mode;
- if (mode & VIDEO_SOUND_MONO)
- vt->audmode = V4L2_TUNER_MODE_MONO;
- if (mode & VIDEO_SOUND_STEREO)
- vt->audmode = V4L2_TUNER_MODE_STEREO;
- if (mode & VIDEO_SOUND_LANG1)
- vt->audmode = V4L2_TUNER_MODE_LANG1;
- if (mode & VIDEO_SOUND_LANG2)
- vt->audmode = V4L2_TUNER_MODE_LANG2;
+ vt->rxsubchans = V4L2_TUNER_SUB_LANG1 |
+ V4L2_TUNER_SUB_LANG2;
break;
}
next prev parent reply other threads:[~2006-03-20 15:56 UTC|newest]
Thread overview: 158+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-20 15:08 [PATCH 000/141] V4L/DVB updates part 1 mchehab
2006-03-20 15:08 ` [PATCH 001/141] V4L/DVB (3392): Add PCI ID for DigitalNow DVB-T Dual, rebranded DViCO FusionHDTV DVB-T Dual mchehab
2006-03-20 15:08 ` [PATCH 003/141] V4L/DVB (3393): Move all IR keymaps to ir-common module mchehab
2006-03-20 15:08 ` [PATCH 009/141] V4L/DVB (3406): Added credits for em28xx-video.c mchehab
2006-03-20 15:08 ` [PATCH 006/141] V4L/DVB (3403): Add probe check for the tda9840 mchehab
2006-03-20 15:08 ` [PATCH 011/141] V4L/DVB (3408): Included new sliced VBI types to videodev2.h and tvp5150 mchehab
2006-03-20 15:08 ` [PATCH 005/141] V4L/DVB (3402): Fix handling of VIDIOC_G_TUNER audmode in msp3400 mchehab
2006-03-20 15:08 ` [PATCH 008/141] V4L/DVB (3405): Fixes tvp5150a/am1 detection mchehab
2006-03-20 15:08 ` [PATCH 010/141] V4L/DVB (3407): added some code for VBI processing and cleanup debug dump mchehab
2006-03-20 15:08 ` [PATCH 007/141] V4L/DVB: VIDEO_CX88_ALSA must select SND_PCM mchehab
2006-03-20 15:08 ` [PATCH 017/141] V4L/DVB (3416): Recognise Hauppauge card #34519 mchehab
2006-03-20 15:08 ` [PATCH 013/141] V4L/DVB (3410): Implemented sliced VBI set on VIDIOC_S_FMT mchehab
2006-03-20 15:08 ` [PATCH 015/141] V4L/DVB (3413): Kill nxt2002 in favor of the nxt200x module mchehab
2006-03-20 15:08 ` [PATCH 016/141] V4L/DVB (3414): rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv mchehab
2006-03-20 15:08 ` [PATCH 014/141] V4L/DVB (3411): group dvb-bt8xx Subsystem ID's together, in order mchehab
2006-03-20 15:08 ` [PATCH 020/141] V4L/DVB (3419): added some VBI macros and moved minor definitions to header file mchehab
2006-03-20 15:08 ` [PATCH 022/141] V4L/DVB (3421): Several fixes to prepare for VBI mchehab
2006-03-20 15:08 ` [PATCH 019/141] V4L/DVB (3418): Cause tda9887 to use I2C_DRIVERID_TDA9887 mchehab
2006-03-20 15:08 ` [PATCH 021/141] V4L/DVB (3420): Added iocls to configure VBI on tvp5150 mchehab
2006-03-20 15:08 ` [PATCH 023/141] V4L/DVB (3422): Implemented VIDIOC_G_FMT/S_FMT for sliced VBI mchehab
2006-03-20 15:08 ` [PATCH 018/141] V4L/DVB (3417): make VP-3054 Secondary I2C Bus Support a Kconfig option mchehab
2006-03-20 15:08 ` [PATCH 026/141] V4L/DVB (3428): drivers/media/dvb/ possible cleanups mchehab
2006-03-20 15:08 ` [PATCH 029/141] V4L/DVB (3431): fixed spelling error, exectuted --> executed mchehab
2006-03-20 15:08 ` mchehab [this message]
2006-03-20 15:08 ` [PATCH 024/141] V4L/DVB (3423): CodingStyle fixes mchehab
2006-03-20 15:08 ` [PATCH 028/141] V4L/DVB (3430): Add new internal VIDIOC_INT commands mchehab
2006-03-20 15:08 ` [PATCH 027/141] V4L/DVB (3429): Missing break statement on tuner-core mchehab
2006-03-20 15:08 ` [PATCH 030/141] V4L/DVB (3432): Hauppauge HVR 900 Composite support mchehab
2006-03-20 15:08 ` [PATCH 035/141] V4L/DVB (3439): removed duplicated tuner_ranges mchehab
2006-03-20 15:08 ` [PATCH 033/141] V4L/DVB (3435): rename cb variable names in tuner structures for global consistency mchehab
2006-03-20 15:08 ` [PATCH 032/141] V4L/DVB (3434): changed comment in tuner-core.c mchehab
2006-03-20 15:08 ` [PATCH 031/141] V4L/DVB (3433): Fix printk type warning mchehab
2006-03-20 15:08 ` [PATCH 034/141] V4L/DVB (3436): move config byte from tuner_params to tuner_range struct mchehab
2006-03-20 15:08 ` [PATCH 036/141] V4L/DVB (3439a): media video stradis memory fix mchehab
2006-03-20 15:08 ` [PATCH 040/141] V4L/DVB (3266): Fix NICAM buzz on analog sound mchehab
2006-03-20 15:08 ` [PATCH 038/141] V4L/DVB (3453a): Alters MAINTAINERS file to point to newer v4l-dvb email mchehab
2006-03-20 15:08 ` [PATCH 037/141] V4L/DVB (3442): Allow tristate build for cx88-vp3054-i2c mchehab
2006-03-20 15:08 ` [PATCH 041/141] V4L/DVB (3267): Add support for the Avermedia 777 DVB-T card mchehab
2006-03-20 15:08 ` [PATCH 039/141] V4L/DVB (3265): Add count to tunertype struct mchehab
2006-03-20 15:08 ` [PATCH 042/141] V4L/DVB (3268): Move video std detection to top of set_tv_freq function mchehab
2006-03-20 15:08 ` [PATCH 047/141] V4L/DVB (3276): Added terratec hybrid xs and kworld 2800rf support mchehab
2006-03-20 15:08 ` [PATCH 045/141] V4L/DVB (3271): Update tuner comments mchehab
2006-03-20 15:08 ` [PATCH 043/141] V4L/DVB (3269): Allow multiple tuner params in each tuner definition mchehab
2006-03-20 15:08 ` [PATCH 046/141] V4L/DVB (3275): Allow SAA7134 to fall back to AM sound when there is NICAM-L mchehab
2006-03-20 15:08 ` [PATCH 044/141] V4L/DVB (3270): Tuner_dbg will show tuner param and range selected mchehab
2006-03-20 15:08 ` [PATCH 050/141] V4L/DVB (3280): Changed description of KWorld PVR TV 2800RF mchehab
2006-03-20 15:08 ` [PATCH 051/141] V4L/DVB (3281): Added signal detection support to tvp5150 mchehab
2006-03-20 15:08 ` [PATCH 052/141] V4L/DVB (3294): Fix [Bug 5895] to correct snd_87x autodetect mchehab
2006-03-20 15:08 ` [PATCH 049/141] V4L/DVB (3278): Show debug for tuners trying to use unsupported video standards mchehab
2006-03-20 15:08 ` [PATCH 048/141] V4L/DVB (3277): Use default tuner_params if desired_type not available mchehab
2006-03-20 15:08 ` [PATCH 053/141] V4L/DVB (3297): Add IR support to KWorld DVB-T (cx22702-based) mchehab
2006-03-20 15:08 ` [PATCH 057/141] V4L/DVB (3303): TDA8290 update mchehab
2006-03-20 15:08 ` [PATCH 059/141] V4L/DVB (3305): Added support for the ADS Instant TV DUO Cardbus PTV331 mchehab
2006-03-20 15:08 ` [PATCH 056/141] V4L/DVB (3302): Added support for the LifeView FlyDVB-T LR301 card mchehab
2006-03-20 15:08 ` [PATCH 054/141] V4L/DVB (3299): Kconfig: DVB_USB_CXUSB depends on DVB_LGDT330X and DVB_MT352 mchehab
2006-03-20 15:08 ` [PATCH 055/141] V4L/DVB (3300): Add standard for South Korean NTSC-M using A2 audio mchehab
2006-03-20 15:08 ` [PATCH 058/141] V4L/DVB (3304): TDA10046 Driver update mchehab
2006-03-20 15:08 ` [PATCH 060/141] V4L/DVB (3306): Fixed i2c return value, conversion mdelay to msleep mchehab
2006-03-20 15:08 ` [PATCH 062/141] V4L/DVB (3308): Use parallel transport for FusionHDTV Dual Digital USB mchehab
2006-03-20 15:08 ` [PATCH 061/141] V4L/DVB (3307): Support for Galaxis DVB-S rev1.3 mchehab
2006-03-20 15:08 ` [PATCH 063/141] V4L/DVB (3310): Use MT352 parallel transport function for all Bluebird FusionHDTV DVB-T boxes mchehab
2006-03-20 15:08 ` [PATCH 064/141] V4L/DVB (3312): FIX: Multiple usage of VP7045-based devices mchehab
2006-03-20 15:08 ` [PATCH 065/141] V4L/DVB (3313): FIX: Check if FW was downloaded or not + new firmware file mchehab
2006-03-20 15:08 ` [PATCH 069/141] V4L/DVB (3318a): Makes Some symbols static mchehab
2006-03-20 15:08 ` [PATCH 071/141] V4L/DVB (3318c): fix saa7146 kobject register failure mchehab
2006-03-20 15:08 ` [PATCH 068/141] V4L/DVB (3316): Add initial support for KWorld HardwareMpegTV XPert mchehab
2006-03-20 15:08 ` [PATCH 066/141] V4L/DVB (3314): Fixed em28xx based system lockup mchehab
2006-03-20 15:08 ` [PATCH 067/141] V4L/DVB (3315): Added support for the Tevion DVB-T 220RF card mchehab
2006-03-20 15:08 ` [PATCH 074/141] V4L/DVB (3325): Disabled debug on by default in tvp5150 mchehab
2006-03-20 15:08 ` [PATCH 077/141] V4L/DVB (3300b): .gitignore should also ignore StGit generated dirs mchehab
2006-03-21 12:20 ` Andrew Morton
2006-03-20 15:08 ` [PATCH 072/141] V4L/DVB (3318e): DVB: remove the at76c651/tda80xx frontends mchehab
2006-03-20 15:08 ` [PATCH 075/141] V4L/DVB (3326): Adding support for Terratec Prodigy XS mchehab
2006-03-20 15:08 ` [PATCH 073/141] V4L/DVB (3324): Fix Samsung tuner frequency ranges mchehab
2006-03-20 15:08 ` [PATCH 076/141] V4L/DVB (3300a): Removing personal email from DVB maintainers mchehab
2006-03-20 15:08 ` [PATCH 081/141] V4L/DVB (3332): XC3028 code marked with an special define option mchehab
2006-03-20 15:08 ` [PATCH 078/141] V4L/DVB (3291): Added support for xc3028 analogue tuner (Hauppauge HVR900, Terratec Hybrid XS) mchehab
2006-03-20 15:08 ` [PATCH 080/141] V4L/DVB (3293): Fixed amux hauppauge hvr900/terratec hybrid xs mchehab
2006-03-20 15:08 ` [PATCH 079/141] V4L/DVB (3292): Fixed xc3028 firmware extractor, added terratec fw support mchehab
2006-03-20 15:08 ` [PATCH 083/141] V4L/DVB (3335): Fix in-kernel build mchehab
2006-03-20 15:08 ` [PATCH 082/141] V4L/DVB (3334): Added ET61X251 fourcc type mchehab
2006-03-20 15:08 ` [PATCH 089/141] V4L/DVB (3344): KWorld HardwareMpegTV XPert must set gpio2 mchehab
2006-03-20 15:08 ` [PATCH 088/141] V4L/DVB (3343): KWorld HardwareMpegTV XPert: Add radio support mchehab
2006-03-20 15:08 ` [PATCH 086/141] V4L/DVB (3340): Make a struct static mchehab
2006-03-20 15:08 ` [PATCH 085/141] V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups mchehab
2006-03-20 15:08 ` [PATCH 084/141] V4L/DVB (3336): Bt8xx documentation authors fix mchehab
2006-03-20 15:08 ` [PATCH 087/141] V4L/DVB (3341): Upstream sync - make 2 structs static mchehab
2006-03-20 15:08 ` [PATCH 095/141] V4L/DVB (3354): Fix maximum for the saturation and contrast controls mchehab
2006-03-20 15:08 ` [PATCH 094/141] V4L/DVB (3352): Cxusb: fix lgdt3303 naming mchehab
2006-03-20 15:08 ` [PATCH 090/141] V4L/DVB (3346): Add saa713x card: ELSA EX-VISION 700TV (saa7130) mchehab
2006-03-20 15:08 ` [PATCH 093/141] V4L/DVB (3349): Remote control codes for BTTV_BOARD_CONTVFMI mchehab
2006-03-20 15:08 ` [PATCH 091/141] V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input mchehab
2006-03-20 15:08 ` [PATCH 092/141] V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards mchehab
2006-03-20 15:08 ` [PATCH 097/141] V4L/DVB (3362): KWorld ATSC110: implement set_pll_input mchehab
2006-03-20 15:08 ` [PATCH 100/141] V4L/DVB (3366): Kworld ATSC110: initialize the tuner for analog mode on module load mchehab
2006-03-20 15:08 ` [PATCH 096/141] V4L/DVB (3361): Add support for Kworld ATSC110 mchehab
2006-03-20 15:08 ` [PATCH 098/141] V4L/DVB (3363): Kworld ATSC110: enable composite and svideo inputs mchehab
2006-03-20 15:08 ` [PATCH 099/141] V4L/DVB (3365): Kworld ATSC110: cleanups mchehab
2006-03-20 15:08 ` [PATCH 101/141] V4L/DVB (3368): KWorld HardwareMpegTV XPert: update comments mchehab
2006-03-20 15:08 ` [PATCH 103/141] V4L/DVB (3371): Add debug to ioctl arguments mchehab
2006-03-20 15:08 ` [PATCH 107/141] V4L/DVB (3375): Add AUDIO_GET_PTS and VIDEO_GET_PTS ioctls mchehab
2006-03-20 15:08 ` [PATCH 106/141] V4L/DVB (3374): Adds debuging v4l2_memory enum mchehab
2006-03-20 15:08 ` [PATCH 105/141] V4L/DVB (3373): Debug messages for ioctl improved mchehab
2006-03-20 15:08 ` [PATCH 104/141] V4L/DVB (3372): Fix a small bug when constructing fps and line numbers mchehab
2006-03-20 15:08 ` [PATCH 102/141] V4L/DVB (3369): LifeView FlyDVB-T Duo: add support for remote control mchehab
2006-03-20 15:08 ` [PATCH 109/141] V4L/DVB (3377): Support for Satelco EasyWatch DVB-S light mchehab
2006-03-20 15:08 ` [PATCH 112/141] V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146) mchehab
2006-03-20 15:08 ` [PATCH 110/141] V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe mchehab
2006-03-20 15:08 ` [PATCH 111/141] V4L/DVB (3380): TUV1236d: declare buffer as static const mchehab
2006-03-20 15:08 ` [PATCH 114/141] V4L/DVB (3386): Dvb-core: remove dead code mchehab
2006-03-20 15:08 ` [PATCH 116/141] V4L/DVB (3389): Fix broken IF-OUT Relay handling mchehab
2006-03-20 15:08 ` [PATCH 118/141] V4L/DVB (3391): Documentation update mchehab
2006-03-20 15:08 ` [PATCH 113/141] V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver mchehab
2006-03-20 15:08 ` [PATCH 117/141] V4L/DVB (3390): Fix module parameters mchehab
2006-03-20 15:56 ` Duncan Sands
2006-03-20 19:10 ` Edgar Toernig
2006-03-21 11:18 ` Duncan Sands
2006-03-20 15:08 ` [PATCH 115/141] V4L/DVB (3388): Ignore DiSEqC messages > 6 and < 3 mchehab
2006-03-20 15:08 ` [PATCH 120/141] V4L/DVB (3392a): XC3028 code removed from -git versions mchehab
2006-03-20 15:08 ` [PATCH 124/141] V4L/DVB (3396): Add DVB-T support for the LifeView DVB Trio PCI card mchehab
2006-03-20 15:08 ` [PATCH 122/141] V4L/DVB (3394): Bttv: correct bttv_risc_packed buffer size mchehab
2006-03-20 15:08 ` [PATCH 123/141] V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support mchehab
2006-03-20 15:08 ` [PATCH 121/141] V4L/DVB (3393): Cx88: reduce excessive logging mchehab
2006-03-20 15:08 ` [PATCH 119/141] V4L/DVB (3392): Do a RESYNC for all cards mchehab
2006-03-20 15:08 ` [PATCH 128/141] V4L/DVB (3399a): cpia2/cpia2_v4l.c cleanups mchehab
2006-03-20 15:08 ` [PATCH 125/141] V4L/DVB (3398): ELSA EX-VISION 700TV: fix incorrect PCI subsystem ID mchehab
2006-03-20 15:08 ` [PATCH 131/141] V4L/DVB (3403): Workaround to fix initialization for Nexus CA mchehab
2006-03-20 15:08 ` [PATCH 126/141] V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID mchehab
2006-03-20 15:08 ` [PATCH 129/141] V4L/DVB (3400): Fixes for Lifeview Trio non fatal bugs mchehab
2006-03-20 15:08 ` [PATCH 130/141] V4L/DVB (3401): Coding style fixes in saa7134-dvb.c mchehab
2006-03-20 15:08 ` [PATCH 127/141] V4L/DVB (3197a): IR keymaps are exported by the ir-common module now mchehab
2006-03-20 15:08 ` [PATCH 132/141] V4L/DVB (3404): Refactored LNBP21 and BSBE1 support mchehab
2006-03-20 15:08 ` [PATCH 137/141] V4L/DVB (3410): Move DViCO hybrid initialisation data from stack mchehab
2006-03-20 15:08 ` [PATCH 134/141] V4L/DVB (3406): Use refactored LNBP21 and BSBE1 code mchehab
2006-03-20 15:08 ` [PATCH 133/141] V4L/DVB (3405): TechnoTrend S-1500 card handling moved from budget.c to budget-ci.c mchehab
2006-03-20 15:08 ` [PATCH 135/141] V4L/DVB (3408): DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV DVB-T Plus support mchehab
2006-03-20 15:08 ` [PATCH 136/141] V4L/DVB (3409): Kconfig: fix in-kernel build for cx88-dvb: zl10353 frontend mchehab
2006-03-20 15:09 ` [PATCH 141/141] V4L/DVB (3415): Msp3400-kthreads.c: make 3 functions static mchehab
2006-03-20 15:09 ` [PATCH 140/141] V4L/DVB (3414): Saa7134: document that there's also a 220RF from KWorld mchehab
2006-03-20 15:09 ` [PATCH 139/141] V4L/DVB (3413): Typos grab bag of the month mchehab
2006-03-20 15:09 ` [PATCH 138/141] V4L/DVB (3411): FE6600 is a Thomson tuner mchehab
2006-03-20 15:49 ` [PATCH 000/141] V4L/DVB updates part 1 Kyle McMartin
2006-03-20 15:50 ` Arjan van de Ven
2006-03-20 17:51 ` Valdis.Kletnieks
2006-03-20 17:55 ` Mauro Carvalho Chehab
2006-03-21 15:47 ` Linus Torvalds
2006-03-21 16:26 ` Linus Torvalds
2006-03-21 17:43 ` Mauro Carvalho Chehab
2006-03-21 18:03 ` Linus Torvalds
2006-03-21 18:24 ` Mauro Carvalho Chehab
2006-03-21 18:42 ` Linus Torvalds
2006-03-21 19:15 ` Mauro Carvalho Chehab
2006-03-21 19:32 ` Linus Torvalds
2006-03-21 23:53 ` Daniel Barkalow
2006-03-22 0:33 ` Linus Torvalds
2006-03-22 21:32 ` Junio C Hamano
2006-03-23 3:31 ` Linus Torvalds
2006-03-22 12:05 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060320150841.PS192117000025@infradead.org \
--to=mchehab@infradead.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-dvb-maintainer@linuxtv.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox