* [PATCH] Add quirks required to make a Shuttle PN-31 remote control work
@ 2006-03-20 22:59 Bernhard Rosenkraenzer
2006-03-21 7:16 ` Vojtech Pavlik
0 siblings, 1 reply; 3+ messages in thread
From: Bernhard Rosenkraenzer @ 2006-03-20 22:59 UTC (permalink / raw)
To: linux-usb-devel; +Cc: vojtech, akpm, linux-kernel
Add some quirks to make a Shuttle PN-31 remote control work.
Shuttle PN31 remote controls are supposed to act as a USB keyboard and mouse,
but they (in particular the mouse part) don't follow the standards.
5 quirks are needed to get this device to work, 2 of which are unique to this
device so far (it sets a superfluous extra bit on the GenericDesktop keycodes,
and the mouse flags are wrong (_Constant_, Variable, Relative).
Tested with 2.6.16-rc6-mm1 and 2.6.16-rc6-mm2.
Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
---
--- linux-2.6.15/drivers/usb/input/hid.h.pn31~ 2006-01-22 18:12:59.000000000
+0100
+++ linux-2.6.15/drivers/usb/input/hid.h 2006-01-22 19:47:13.000000000 +0100
@@ -249,6 +249,9 @@
#define HID_QUIRK_CYMOTION 0x00000800
#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000
#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000
+#define HID_QUIRK_BAD_LOGICAL_RANGE 0x00004000
+#define HID_QUIRK_WRONG_CONSTANT 0x00008000
+#define HID_QUIRK_GENDESK_EXTRA_BIT 0x00010000
/*
* This is the global environment of the parser. This information is
--- linux-2.6.15/drivers/usb/input/hid-input.c.pn31~ 2006-01-22
18:12:59.000000000 +0100
+++ linux-2.6.15/drivers/usb/input/hid-input.c 2006-01-22 18:13:35.000000000
+0100
@@ -243,7 +243,7 @@
printk(" ---> ");
#endif
- if (field->flags & HID_MAIN_ITEM_CONSTANT)
+ if ((field->flags & HID_MAIN_ITEM_CONSTANT) && !(device->quirks &
HID_QUIRK_WRONG_CONSTANT))
goto ignore;
switch (usage->hid & HID_USAGE_PAGE) {
@@ -326,16 +326,21 @@
break;
}
- switch (usage->hid) {
+ if (device->quirks & HID_QUIRK_GENDESK_EXTRA_BIT)
+ code = usage->hid & 0xfff9ffff;
+ else
+ code = usage->hid;
+
+ switch (code) {
/* These usage IDs map directly to the usage codes. */
case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
if (field->flags & HID_MAIN_ITEM_RELATIVE)
- map_rel(usage->hid & 0xf);
+ map_rel(code & 0xf);
else
- map_abs(usage->hid & 0xf);
+ map_abs(code & 0xf);
break;
case HID_GD_HATSWITCH:
@@ -569,6 +574,12 @@
set_bit(usage->type, input->evbit);
+ if ((usage->type == EV_REL) &&
+ (device->quirks & HID_QUIRK_BAD_LOGICAL_RANGE) && (field->logical_minimum
== field->logical_maximum)) {
+ field->logical_minimum = -127;
+ field->logical_maximum = 127;
+ }
+
while (usage->code <= max && test_and_set_bit(usage->code, bit))
usage->code = find_next_zero_bit(bit, max + 1, usage->code);
--- linux-2.6.15/drivers/usb/input/hid-core.c.pn31~ 2006-01-22
18:13:18.000000000 +0100
+++ linux-2.6.15/drivers/usb/input/hid-core.c 2006-01-22 18:13:35.000000000
+0100
@@ -1449,6 +1449,9 @@
* Alphabetically sorted blacklist by quirk type.
*/
+#define USB_VENDOR_ID_SHUTTLE_REMOTE 0x4572
+#define USB_DEVICE_ID_SHUTTLE_PN31 0x4572
+
static const struct hid_blacklist {
__u16 idVendor;
__u16 idProduct;
@@ -1585,6 +1588,8 @@
{ USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_SHUTTLE_REMOTE, USB_DEVICE_ID_SHUTTLE_PN31,
HID_QUIRK_BAD_LOGICAL_RANGE | HID_QUIRK_HIDDEV | HID_QUIRK_MULTI_INPUT |
HID_QUIRK_WRONG_CONSTANT | HID_QUIRK_GENDESK_EXTRA_BIT },
+
{ 0, 0 }
};
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Add quirks required to make a Shuttle PN-31 remote control work
2006-03-20 22:59 [PATCH] Add quirks required to make a Shuttle PN-31 remote control work Bernhard Rosenkraenzer
@ 2006-03-21 7:16 ` Vojtech Pavlik
2006-03-23 17:51 ` Bernhard Rosenkraenzer
0 siblings, 1 reply; 3+ messages in thread
From: Vojtech Pavlik @ 2006-03-21 7:16 UTC (permalink / raw)
To: Bernhard Rosenkraenzer; +Cc: linux-usb-devel, akpm, linux-kernel
On Mon, Mar 20, 2006 at 11:59:24PM +0100, Bernhard Rosenkraenzer wrote:
> Add some quirks to make a Shuttle PN-31 remote control work.
>
> Shuttle PN31 remote controls are supposed to act as a USB keyboard and mouse,
> but they (in particular the mouse part) don't follow the standards.
>
> 5 quirks are needed to get this device to work, 2 of which are unique to this
> device so far (it sets a superfluous extra bit on the GenericDesktop keycodes,
> and the mouse flags are wrong (_Constant_, Variable, Relative).
>
> Tested with 2.6.16-rc6-mm1 and 2.6.16-rc6-mm2.
Can you send me the #define DEBUG output from hid-core and hid-input?
I'm quite curious how much broken the device is and if it weren't easier
to implement a way how to replace the HID Report descriptor inside
hid-core instead of adding more quirks.
>
> Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
>
> ---
>
> --- linux-2.6.15/drivers/usb/input/hid.h.pn31~ 2006-01-22 18:12:59.000000000
> +0100
> +++ linux-2.6.15/drivers/usb/input/hid.h 2006-01-22 19:47:13.000000000 +0100
> @@ -249,6 +249,9 @@
> #define HID_QUIRK_CYMOTION 0x00000800
> #define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000
> #define HID_QUIRK_POWERBOOK_FN_ON 0x00002000
> +#define HID_QUIRK_BAD_LOGICAL_RANGE 0x00004000
> +#define HID_QUIRK_WRONG_CONSTANT 0x00008000
> +#define HID_QUIRK_GENDESK_EXTRA_BIT 0x00010000
>
> /*
> * This is the global environment of the parser. This information is
> --- linux-2.6.15/drivers/usb/input/hid-input.c.pn31~ 2006-01-22
> 18:12:59.000000000 +0100
> +++ linux-2.6.15/drivers/usb/input/hid-input.c 2006-01-22 18:13:35.000000000
> +0100
> @@ -243,7 +243,7 @@
> printk(" ---> ");
> #endif
>
> - if (field->flags & HID_MAIN_ITEM_CONSTANT)
> + if ((field->flags & HID_MAIN_ITEM_CONSTANT) && !(device->quirks &
> HID_QUIRK_WRONG_CONSTANT))
> goto ignore;
>
> switch (usage->hid & HID_USAGE_PAGE) {
> @@ -326,16 +326,21 @@
> break;
> }
>
> - switch (usage->hid) {
> + if (device->quirks & HID_QUIRK_GENDESK_EXTRA_BIT)
> + code = usage->hid & 0xfff9ffff;
> + else
> + code = usage->hid;
> +
> + switch (code) {
>
> /* These usage IDs map directly to the usage codes. */
> case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
> case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
> case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL:
> if (field->flags & HID_MAIN_ITEM_RELATIVE)
> - map_rel(usage->hid & 0xf);
> + map_rel(code & 0xf);
> else
> - map_abs(usage->hid & 0xf);
> + map_abs(code & 0xf);
> break;
>
> case HID_GD_HATSWITCH:
> @@ -569,6 +574,12 @@
>
> set_bit(usage->type, input->evbit);
>
> + if ((usage->type == EV_REL) &&
> + (device->quirks & HID_QUIRK_BAD_LOGICAL_RANGE) && (field->logical_minimum
> == field->logical_maximum)) {
> + field->logical_minimum = -127;
> + field->logical_maximum = 127;
> + }
> +
> while (usage->code <= max && test_and_set_bit(usage->code, bit))
> usage->code = find_next_zero_bit(bit, max + 1, usage->code);
>
> --- linux-2.6.15/drivers/usb/input/hid-core.c.pn31~ 2006-01-22
> 18:13:18.000000000 +0100
> +++ linux-2.6.15/drivers/usb/input/hid-core.c 2006-01-22 18:13:35.000000000
> +0100
> @@ -1449,6 +1449,9 @@
> * Alphabetically sorted blacklist by quirk type.
> */
>
> +#define USB_VENDOR_ID_SHUTTLE_REMOTE 0x4572
> +#define USB_DEVICE_ID_SHUTTLE_PN31 0x4572
> +
> static const struct hid_blacklist {
> __u16 idVendor;
> __u16 idProduct;
> @@ -1585,6 +1588,8 @@
> { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
> { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
>
> + { USB_VENDOR_ID_SHUTTLE_REMOTE, USB_DEVICE_ID_SHUTTLE_PN31,
> HID_QUIRK_BAD_LOGICAL_RANGE | HID_QUIRK_HIDDEV | HID_QUIRK_MULTI_INPUT |
> HID_QUIRK_WRONG_CONSTANT | HID_QUIRK_GENDESK_EXTRA_BIT },
> +
> { 0, 0 }
> };
>
>
>
--
Vojtech Pavlik
Director SuSE Labs
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Add quirks required to make a Shuttle PN-31 remote control work
2006-03-21 7:16 ` Vojtech Pavlik
@ 2006-03-23 17:51 ` Bernhard Rosenkraenzer
0 siblings, 0 replies; 3+ messages in thread
From: Bernhard Rosenkraenzer @ 2006-03-23 17:51 UTC (permalink / raw)
To: Vojtech Pavlik; +Cc: linux-usb-devel, akpm, linux-kernel
On Tuesday, 21. March 2006 08:16, Vojtech Pavlik wrote:
> On Mon, Mar 20, 2006 at 11:59:24PM +0100, Bernhard Rosenkraenzer wrote:
> > Add some quirks to make a Shuttle PN-31 remote control work.
>
> Can you send me the #define DEBUG output from hid-core and hid-input?
> I'm quite curious how much broken the device is and if it weren't easier
> to implement a way how to replace the HID Report descriptor inside
> hid-core instead of adding more quirks.
Unfortunately not ATM, I don't have the hardware anymore (it was part of the
"If you get any new hardware, give it to me for a day before selling it, to
make sure it supports Linux" deal I have with a local computer shop).
I'll gather the debug output if/when he sells another one.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-03-23 17:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-20 22:59 [PATCH] Add quirks required to make a Shuttle PN-31 remote control work Bernhard Rosenkraenzer
2006-03-21 7:16 ` Vojtech Pavlik
2006-03-23 17:51 ` Bernhard Rosenkraenzer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox