[PATCH] typo: buad -> baud - Horst Schirmeier

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

From: Horst Schirmeier <horst@schirmeier.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, trivial@kernel.org
Subject: [PATCH] typo: buad -> baud
Date: Thu, 13 Apr 2006 13:37:51 +0200	[thread overview]
Message-ID: <20060413113751.GK2335@quickstop.soohrt.org> (raw)

Replacing mistyped "buad" with "baud" where applicable.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>

---

 arch/mips/ddb5xxx/ddb5476/dbg_io.c        |    2 +-
 arch/mips/ddb5xxx/ddb5477/kgdb_io.c       |    2 +-
 arch/mips/gt64120/ev64120/serialGT.c      |    2 +-
 arch/mips/gt64120/momenco_ocelot/dbg_io.c |    2 +-
 arch/mips/ite-boards/generic/dbg_io.c     |    2 +-
 arch/mips/momentum/jaguar_atx/dbg_io.c    |    2 +-
 arch/mips/momentum/ocelot_c/dbg_io.c      |    2 +-
 arch/mips/momentum/ocelot_g/dbg_io.c      |    2 +-
 include/asm-arm/arch-l7200/serial_l7200.h |    2 +-
 include/asm-arm/arch-l7200/uncompress.h   |    2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e50..f2296a9 100644
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, 
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d59..385bbdb 100644
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, 
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a5..8f0d835 100644
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned lo
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530..6a7ccaf 100644
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac8..d7dea0a 100644
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595..b1008a9 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
 #define UARTDR			0x00	/* Tx/Rx data */
 #define RXSTAT			0x04	/* Rx status */
 #define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
 #define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
 #define UARTCON			0x14	/* control register */
 #define UARTFLG			0x18	/* flag register */
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40a..04be2a0 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000	SJH	Created
  *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded buad rate
+ *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>

-- 
PGP-Key 0xD40E0E7A

next             reply	other threads:[~2006-04-13 11:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-04-13 11:37 Horst Schirmeier [this message]
2006-06-05  9:46 ` [PATCH] typo: buad -> baud Russell King

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:85e9e50 dfblob:f2296a9 dfblob:1d18d59 dfblob:385bbdb
dfblob:16e34a5 dfblob:8f0d835 dfblob:8720bcc dfblob:f0a6a38
dfblob:c4f8530 dfblob:6a7ccaf dfblob:542eac8 dfblob:d7dea0a
dfblob:8720bcc dfblob:f0a6a38 dfblob:8720bcc dfblob:f0a6a38
dfblob:238c595 dfblob:b1008a9 dfblob:9fcd40a dfblob:04be2a0 )
 OR (
bs:"[PATCH] typo: buad -> baud" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060413113751.GK2335@quickstop.soohrt.org \
    --to=horst@schirmeier.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox