From: Nigel Cunningham <nigel@suspend2.net>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>,
Nick Piggin <nickpiggin@yahoo.com.au>,
Linux PM <linux-pm@osdl.org>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [RFC][PATCH] swsusp: support creating bigger images
Date: Wed, 26 Apr 2006 10:49:33 +1000 [thread overview]
Message-ID: <200604261049.39592.nigel@suspend2.net> (raw)
In-Reply-To: <200604260043.03481.rjw@sisk.pl>
[-- Attachment #1: Type: text/plain, Size: 3727 bytes --]
Hi.
On Wednesday 26 April 2006 08:43, Rafael J. Wysocki wrote:
> Hi,
>
> On Wednesday 26 April 2006 00:25, Pavel Machek wrote:
> > > > It does apply to all of the LRU pages. This is what I've been doing
> > > > for years now. The only corner case I've come across is XFS. It still
> > > > wants to write data even when there's nothing to do and it's threads
> > > > are frozen (IIRC - haven't looked at it for a while). I got around
> > > > that by freezing bdevs when freezing processes.
> > >
> > > This means if we freeze bdevs, we'll be able to save all of the LRU
> > > pages, except for the pages mapped by the current task, without
> > > copying. I think we can try to do this, but we'll need a patch to
> > > freeze bdevs for this purpose. ;-)
> >
> > ...adding more dependencies to how vm/blockdevs work. I'd say current
> > code is complex enough...
>
> Well, why don't we see the patch? If it's too complex, we can just decide
> not to use it. :-)
In Suspend2, I'm still using a different version of process.c to what you guys
have. In my version, I thaw kernelspace, then thaw bdevs, then thaw userspace.
The version below just thaws bdevs after thawing all processes. I think that
might need modification, but thought I'd post this now so you can see how
complicated or otherwise it is.
Regards,
Nigel
diff -ruN linux-2.6.17-rc2/kernel/power/process.c bdev-freeze/kernel/power/process.c
--- linux-2.6.17-rc2/kernel/power/process.c 2006-04-19 14:27:36.000000000 +1000
+++ bdev-freeze/kernel/power/process.c 2006-04-26 10:44:56.000000000 +1000
@@ -19,6 +19,56 @@
*/
#define TIMEOUT (20 * HZ)
+struct frozen_fs
+{
+ struct list_head fsb_list;
+ struct super_block *sb;
+};
+
+LIST_HEAD(frozen_fs_list);
+
+void freezer_make_fses_rw(void)
+{
+ struct frozen_fs *fs, *next_fs;
+
+ list_for_each_entry_safe(fs, next_fs, &frozen_fs_list, fsb_list) {
+ thaw_bdev(fs->sb->s_bdev, fs->sb);
+
+ list_del(&fs->fsb_list);
+ kfree(fs);
+ }
+}
+
+/*
+ * Done after userspace is frozen, so there should be no danger of
+ * fses being unmounted while we're in here.
+ */
+int freezer_make_fses_ro(void)
+{
+ struct frozen_fs *fs;
+ struct super_block *sb;
+
+ /* Generate the list */
+ list_for_each_entry(sb, &super_blocks, s_list) {
+ if (!sb->s_root || !sb->s_bdev ||
+ (sb->s_frozen == SB_FREEZE_TRANS) ||
+ (sb->s_flags & MS_RDONLY))
+ continue;
+
+ fs = kmalloc(sizeof(struct frozen_fs), GFP_ATOMIC);
+ fs->sb = sb;
+ list_add_tail(&fs->fsb_list, &frozen_fs_list);
+ };
+
+ /* Do the freezing in reverse order so filesystems dependant
+ * upon others are frozen in the right order. (Eg loopback
+ * on ext3). */
+ list_for_each_entry_reverse(fs, &frozen_fs_list, fsb_list)
+ freeze_bdev(fs->sb->s_bdev);
+
+ return 0;
+}
+
static inline int freezeable(struct task_struct * p)
{
@@ -77,6 +127,7 @@
printk( "Stopping tasks: " );
start_time = jiffies;
user_frozen = 0;
+ bdevs_frozen = 0;
do {
nr_user = todo = 0;
read_lock(&tasklist_lock);
@@ -107,6 +158,10 @@
start_time = jiffies;
}
user_frozen = !nr_user;
+
+ if (user_frozen && !bdevs_frozen)
+ freezer_make_fses_ro();
+
yield(); /* Yield is okay here */
if (todo && time_after(jiffies, start_time + TIMEOUT))
break;
@@ -156,6 +211,8 @@
printk(KERN_INFO " Strange, %s not stopped\n", p->comm );
} while_each_thread(g, p);
+ freezer_make_fses_rw();
+
read_unlock(&tasklist_lock);
schedule();
printk( " done\n" );
--
See our web page for Howtos, FAQs, the Wiki and mailing list info.
http://www.suspend2.net IRC: #suspend2 on Freenode
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2006-04-26 0:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-24 21:55 [RFC][PATCH] swsusp: support creating bigger images Rafael J. Wysocki
2006-04-24 22:16 ` Pavel Machek
2006-04-25 8:26 ` Rafael J. Wysocki
2006-04-25 10:04 ` Pavel Machek
2006-04-25 10:31 ` Rafael J. Wysocki
2006-04-27 15:27 ` Rafael J. Wysocki
2006-04-27 20:55 ` Pavel Machek
2006-04-28 9:19 ` Rafael J. Wysocki
2006-04-28 9:23 ` Pavel Machek
2006-04-25 10:28 ` Nick Piggin
2006-04-25 15:39 ` Rafael J. Wysocki
2006-04-25 20:32 ` Pavel Machek
2006-04-25 21:12 ` Rafael J. Wysocki
2006-04-25 21:18 ` Nigel Cunningham
2006-04-25 22:21 ` Rafael J. Wysocki
2006-04-25 22:24 ` Nigel Cunningham
2006-04-25 22:38 ` Rafael J. Wysocki
2006-04-25 22:25 ` Pavel Machek
2006-04-25 22:30 ` Nigel Cunningham
2006-04-25 22:36 ` Pavel Machek
2006-04-25 22:43 ` Rafael J. Wysocki
2006-04-26 0:49 ` Nigel Cunningham [this message]
2006-04-30 12:27 ` Rafael J. Wysocki
2006-05-01 1:49 ` Nigel Cunningham
2006-04-26 2:24 ` Nick Piggin
2006-04-26 3:41 ` Nigel Cunningham
2006-04-26 16:22 ` Nick Piggin
2006-04-26 21:16 ` Rafael J. Wysocki
2006-04-26 8:10 ` Pavel Machek
2006-04-27 19:53 ` [RFC][PATCH] swsusp: support creating bigger images (rev. 2) Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200604261049.39592.nigel@suspend2.net \
--to=nigel@suspend2.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@osdl.org \
--cc=nickpiggin@yahoo.com.au \
--cc=pavel@ucw.cz \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox