[PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundation

Doug Thompson
2006-05-09T00:06:11Z

PATCH against the 2.6.17-rc3 release.

Currently, the EDAC (error detection and correction) modules that are in the kernel
contain some features that need to be moved. After some good feedback on the PCI
Parity detection code and interface
(http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this patch ADDs an
new attribute to the pci_dev structure: Namely the 'broken_parity_status' bit.

When set this indicates that the respective hardware generates false positives of
Parity errors.

The EDAC "blacklist" solution was inferior and will be removed in a future patch.

Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card which
generates false positive parity errors.

I am requesting comments on this AND on the possibility of a exposing this
'broken_parity_status' bit to userland via the PCI device sysfs directory for
devices. This access would allow for enabling of this feature on new devices and for
old devices that have their drivers updated. (SLES 9 SP3 did this on an ATI
motherboard video device). There is a need to update such a PCI attribute between
kernel releases.

This patch just adds a storage place for the attribute and a quirk entry for a known
bad PCI device. PCI Parity reaper/harvestor operations are in EDAC itself and will
be refactored to use this PCI attribute instead of its own mechanisms (which are
currently disabled) in the future.

Signed-off-by: Doug Thompson <norsk5@xmission.com>
---

drivers/pci/quirks.c | 11 +++++++++++
include/linux/pci.h | 1 +
include/linux/pci_ids.h | 1 +
3 files changed, 13 insertions(+)

diff -uprN -X orig/Documentation/dontdiff orig/drivers/pci/quirks.c
new/drivers/pci/quirks.c
--- orig/drivers/pci/quirks.c 2006-03-21 10:19:58.000000000 -0700
+++ new/drivers/pci/quirks.c 2006-05-08 15:54:17.000000000 -0600
@@ -24,6 +24,17 @@
#include <linux/acpi.h>
#include "pci.h"

+/* The Mellanox Tavor device gives false positive parity errors
+ * Mark this device with a broken_parity_status, to allow
+ * PCI scanning code to "skip" this now blacklisted device.
+ */
+static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
+{
+ dev->broken_parity_status = 1; /* This device gives false positives */
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor
);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor
);
+
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
static void __devinit quirk_passive_release(struct pci_dev *dev)
diff -uprN -X orig/Documentation/dontdiff orig/include/linux/pci.h
new/include/linux/pci.h
--- orig/include/linux/pci.h 2006-03-21 10:20:00.000000000 -0700
+++ new/include/linux/pci.h 2006-05-08 15:20:46.000000000 -0600
@@ -152,6 +152,7 @@ struct pci_dev {
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
+ unsigned int broken_parity_status:1; /* Device generates false positive parity */

u32 saved_config_space[16]; /* config space saved at suspend time */
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
diff -uprN -X orig/Documentation/dontdiff orig/include/linux/pci_ids.h
new/include/linux/pci_ids.h
--- orig/include/linux/pci_ids.h 2006-03-21 10:20:12.000000000 -0700
+++ new/include/linux/pci_ids.h 2006-05-08 15:54:05.000000000 -0600
@@ -1914,6 +1914,7 @@

#define PCI_VENDOR_ID_MELLANOX 0x15b3
#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44
+#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46
#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282
#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c