From: Wakko Warner <wakko@animx.eu.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFT] major libata update
Date: Mon, 15 May 2006 19:47:43 -0400 [thread overview]
Message-ID: <20060515234743.GD4699@animx.eu.org> (raw)
In-Reply-To: <1147736327.26686.224.camel@localhost.localdomain>
Alan Cox wrote:
> On Llu, 2006-05-15 at 19:02 -0400, Wakko Warner wrote:
> > How about PATA? Specifically intel's IDE chip. I have a machine that I can
> > blow the hard drive away if I want to.
>
> Give the patch on zeniv.linux.org.uk/~alan/IDE a go in that case and let
> me know how it behaves.
I noticed one hunk failed with 2.6.17-rc4 when using
patch-2.6.17-rc3-ide2.gz
It was only the version string so I should be ok. As I said, if it blows up
on me, that's ok.
I attempted to patch Jeff's libata1 over top of this, it failed miserably.
When I patched Jeff's libata1 over 2.6.17-rc4, it was ok, except for 2
files:
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
32 out of 32 hunks ignored -- saving rejects to file drivers/scsi/ahci.c.rej
patching file drivers/scsi/ata_piix.c
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
5 out of 5 hunks ignored -- saving rejects to file
drivers/scsi/ata_piix.c.rej
If you're curious, alan's patch + jeff's patch:
patching file drivers/scsi/Makefile
Hunk #1 succeeded at 201 (offset 37 lines).
patching file drivers/scsi/ahci.c
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
32 out of 32 hunks ignored -- saving rejects to file drivers/scsi/ahci.c.rej
patching file drivers/scsi/ata_piix.c
Hunk #1 FAILED at 93.
Hunk #2 succeeded at 299 with fuzz 2 (offset 56 lines).
Hunk #3 succeeded at 335 with fuzz 2 (offset 61 lines).
Hunk #4 succeeded at 700 (offset 210 lines).
Hunk #5 succeeded at 805 (offset 234 lines).
1 out of 5 hunks FAILED -- saving rejects to file drivers/scsi/ata_piix.c.rej
patching file drivers/scsi/libata-bmdma.c
patching file drivers/scsi/libata-core.c
Hunk #23 succeeded at 1503 (offset 6 lines).
Hunk #24 succeeded at 1573 (offset 6 lines).
Hunk #25 succeeded at 1587 (offset 6 lines).
Hunk #26 succeeded at 1624 (offset 6 lines).
Hunk #27 succeeded at 1644 (offset 6 lines).
Hunk #28 succeeded at 1674 (offset 6 lines).
Hunk #29 succeeded at 1713 (offset 6 lines).
Hunk #30 succeeded at 1979 (offset 6 lines).
Hunk #31 succeeded at 2218 (offset 6 lines).
Hunk #32 succeeded at 2228 (offset 6 lines).
Hunk #33 succeeded at 2321 (offset 6 lines).
Hunk #34 succeeded at 2348 (offset 6 lines).
Hunk #35 succeeded at 2416 (offset 6 lines).
Hunk #36 succeeded at 2425 (offset 6 lines).
Hunk #37 succeeded at 2463 (offset 6 lines).
Hunk #38 succeeded at 2493 (offset 6 lines).
Hunk #39 succeeded at 2501 (offset 6 lines).
Hunk #40 succeeded at 2519 (offset 6 lines).
Hunk #41 succeeded at 2537 (offset 6 lines).
Hunk #42 succeeded at 2549 (offset 6 lines).
Hunk #43 succeeded at 2628 (offset 6 lines).
Hunk #44 succeeded at 2687 (offset 6 lines).
Hunk #45 succeeded at 2695 (offset 6 lines).
Hunk #46 succeeded at 2720 (offset 6 lines).
Hunk #47 succeeded at 2744 (offset 6 lines).
Hunk #48 succeeded at 2759 (offset 6 lines).
Hunk #49 succeeded at 2830 (offset 6 lines).
Hunk #50 succeeded at 2850 (offset 6 lines).
Hunk #51 succeeded at 2874 (offset 6 lines).
Hunk #52 succeeded at 2886 (offset 6 lines).
Hunk #53 succeeded at 2992 (offset 6 lines).
Hunk #54 FAILED at 3006.
Hunk #55 succeeded at 3068 (offset 1 line).
Hunk #56 succeeded at 3076 (offset 1 line).
Hunk #57 succeeded at 3091 (offset 1 line).
Hunk #58 succeeded at 3101 (offset 1 line).
Hunk #59 succeeded at 3114 (offset 1 line).
Hunk #60 succeeded at 3259 (offset 1 line).
Hunk #61 succeeded at 3496 (offset 1 line).
Hunk #62 succeeded at 3634 (offset -28 lines).
Hunk #63 FAILED at 3659.
Hunk #64 succeeded at 3761 with fuzz 1 (offset -28 lines).
Hunk #65 succeeded at 3786 (offset -28 lines).
Hunk #66 FAILED at 3813.
Hunk #67 FAILED at 3849.
Hunk #68 succeeded at 4207 (offset -27 lines).
Hunk #69 succeeded at 4226 (offset -27 lines).
Hunk #70 succeeded at 4269 (offset -27 lines).
Hunk #71 succeeded at 4450 (offset -27 lines).
Hunk #72 succeeded at 4515 (offset -27 lines).
Hunk #73 succeeded at 4643 (offset -27 lines).
Hunk #74 succeeded at 4711 (offset -27 lines).
Hunk #75 succeeded at 4749 (offset -27 lines).
Hunk #76 succeeded at 4764 (offset -27 lines).
Hunk #77 succeeded at 4937 (offset -27 lines).
Hunk #78 succeeded at 4959 (offset -27 lines).
Hunk #79 succeeded at 5112 (offset -23 lines).
Hunk #80 succeeded at 5126 (offset -23 lines).
Hunk #81 succeeded at 5193 (offset -23 lines).
Hunk #82 succeeded at 5266 (offset -21 lines).
Hunk #83 succeeded at 5318 (offset -15 lines).
Hunk #84 succeeded at 5413 (offset -15 lines).
Hunk #85 succeeded at 5577 (offset -15 lines).
Hunk #86 succeeded at 5636 (offset -15 lines).
Hunk #87 succeeded at 5661 (offset -13 lines).
Hunk #88 succeeded at 5682 (offset -13 lines).
Hunk #89 succeeded at 5721 (offset -13 lines).
4 out of 89 hunks FAILED -- saving rejects to file drivers/scsi/libata-core.c.rej
patching file drivers/scsi/libata-eh.c
patching file drivers/scsi/libata-scsi.c
patching file drivers/scsi/libata.h
patching file drivers/scsi/pdc_adma.c
patching file drivers/scsi/sata_mv.c
Hunk #2 succeeded at 682 (offset 2 lines).
Hunk #3 succeeded at 1311 (offset 2 lines).
Hunk #4 succeeded at 1398 (offset 2 lines).
Hunk #5 succeeded at 1419 (offset 2 lines).
Hunk #6 succeeded at 1936 (offset 2 lines).
Hunk #7 succeeded at 1962 (offset 2 lines).
Hunk #8 succeeded at 1994 (offset 2 lines).
Hunk #9 succeeded at 2025 (offset 2 lines).
patching file drivers/scsi/sata_nv.c
Hunk #2 succeeded at 280 (offset 1 line).
patching file drivers/scsi/sata_promise.c
Hunk #2 succeeded at 438 (offset 2 lines).
Hunk #3 succeeded at 446 (offset 2 lines).
Hunk #4 succeeded at 537 (offset 2 lines).
Hunk #5 succeeded at 680 (offset 2 lines).
patching file drivers/scsi/sata_qstor.c
Hunk #2 succeeded at 176 (offset 1 line).
Hunk #3 succeeded at 395 (offset 1 line).
Hunk #4 succeeded at 428 (offset 1 line).
patching file drivers/scsi/sata_sil.c
Hunk #3 FAILED at 176.
Hunk #4 succeeded at 269 (offset 1 line).
Hunk #5 succeeded at 320 (offset 1 line).
Hunk #6 succeeded at 393 (offset 1 line).
Hunk #7 succeeded at 417 (offset 1 line).
Hunk #8 succeeded at 507 (offset 1 line).
1 out of 8 hunks FAILED -- saving rejects to file drivers/scsi/sata_sil.c.rej
patching file drivers/scsi/sata_sil24.c
Hunk #9 succeeded at 388 with fuzz 2 (offset 1 line).
Hunk #10 succeeded at 415 (offset 1 line).
Hunk #11 succeeded at 425 (offset 1 line).
Hunk #12 succeeded at 434 (offset 1 line).
Hunk #13 succeeded at 442 (offset 1 line).
Hunk #14 succeeded at 510 (offset 1 line).
Hunk #15 succeeded at 580 (offset 1 line).
Hunk #16 succeeded at 661 (offset 1 line).
Hunk #17 succeeded at 687 (offset 1 line).
Hunk #18 succeeded at 699 (offset 1 line).
Hunk #19 succeeded at 709 (offset 1 line).
Hunk #20 succeeded at 729 (offset 1 line).
Hunk #21 succeeded at 890 (offset 1 line).
Hunk #22 succeeded at 903 (offset 1 line).
Hunk #23 succeeded at 940 (offset 1 line).
Hunk #24 succeeded at 1004 (offset 1 line).
Hunk #25 succeeded at 1057 (offset 1 line).
Hunk #26 succeeded at 1115 (offset 1 line).
Hunk #27 succeeded at 1137 (offset 1 line).
patching file drivers/scsi/sata_sis.c
patching file drivers/scsi/sata_svw.c
patching file drivers/scsi/sata_sx4.c
Hunk #2 succeeded at 219 (offset 1 line).
Hunk #3 succeeded at 834 (offset 1 line).
Hunk #4 succeeded at 869 (offset 1 line).
Hunk #5 succeeded at 1377 (offset 1 line).
patching file drivers/scsi/sata_uli.c
patching file drivers/scsi/sata_via.c
patching file drivers/scsi/sata_vsc.c
patching file drivers/scsi/scsi.c
patching file drivers/scsi/scsi_error.c
patching file drivers/scsi/scsi_lib.c
patching file drivers/scsi/scsi_priv.h
patching file include/linux/ata.h
patching file include/linux/libata.h
Hunk #2 succeeded at 45 with fuzz 2.
Hunk #4 FAILED at 123.
Hunk #5 succeeded at 140 (offset 1 line).
Hunk #6 succeeded at 223 (offset 1 line).
Hunk #7 succeeded at 284 (offset 1 line).
Hunk #8 succeeded at 375 (offset 1 line).
Hunk #9 succeeded at 387 (offset 1 line).
Hunk #10 succeeded at 424 (offset 1 line).
Hunk #11 succeeded at 466 (offset 1 line).
Hunk #12 succeeded at 489 (offset 1 line).
Hunk #13 succeeded at 531 (offset 3 lines).
Hunk #14 succeeded at 585 (offset 3 lines).
Hunk #15 succeeded at 610 (offset 3 lines).
Hunk #16 FAILED at 666.
Hunk #17 succeeded at 735 (offset 7 lines).
Hunk #18 succeeded at 821 (offset 7 lines).
Hunk #19 succeeded at 934 (offset 7 lines).
Hunk #20 succeeded at 977 (offset 7 lines).
Hunk #21 succeeded at 1060 (offset 7 lines).
Hunk #22 succeeded at 1097 (offset 7 lines).
2 out of 22 hunks FAILED -- saving rejects to file include/linux/libata.h.rej
patching file include/scsi/scsi_cmnd.h
patching file include/scsi/scsi_eh.h
patching file include/scsi/scsi_host.h
--
Lab tests show that use of micro$oft causes cancer in lab animals
Got Gas???
next prev parent reply other threads:[~2006-05-15 23:42 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-15 17:00 [RFT] major libata update Jeff Garzik
2006-05-15 17:18 ` Andrew Morton
2006-05-15 18:06 ` Jeff Garzik
2006-05-15 19:06 ` Arkadiusz Miskiewicz
2006-05-15 20:45 ` Jeff Garzik
2006-05-15 19:33 ` Mark Lord
2006-05-15 22:52 ` Tejun Heo
2006-05-15 18:15 ` Jeff Garzik
2006-05-15 18:27 ` Andrew Morton
2006-05-15 18:44 ` Jeff Garzik
2006-05-15 18:37 ` Alan Cox
2006-05-15 17:19 ` Alan Cox
2006-05-15 17:13 ` Jeff Garzik
2006-05-15 18:29 ` Tomasz Torcz
2006-05-15 18:43 ` Jeff Garzik
2006-05-15 23:32 ` Tejun Heo
2006-05-15 23:49 ` Jeff Garzik
2006-05-16 0:04 ` Tejun Heo
2006-05-16 2:15 ` Tejun Heo
2006-05-15 19:15 ` Jeff Garzik
2006-05-15 23:02 ` Wakko Warner
2006-05-15 23:00 ` Jeff Garzik
2006-05-15 23:13 ` Wakko Warner
2006-05-15 23:19 ` Jeff Garzik
2006-05-15 23:40 ` Alan Cox
2006-05-15 23:50 ` Wakko Warner
2006-05-15 23:38 ` Alan Cox
2006-05-15 23:47 ` Wakko Warner [this message]
2006-05-15 23:45 ` Jeff Garzik
2006-05-15 23:30 ` Avuton Olrich
2006-05-15 23:36 ` Tejun Heo
2006-05-15 23:54 ` Jeff Garzik
2006-05-16 0:08 ` Avuton Olrich
2006-05-16 3:36 ` Avuton Olrich
2006-05-16 3:51 ` Jeff Garzik
2006-05-16 4:33 ` Avuton Olrich
2006-05-16 14:57 ` Linus Torvalds
2006-05-17 15:25 ` OGAWA Hirofumi
2006-05-17 23:40 ` Linus Torvalds
2006-05-17 23:48 ` Jeff Garzik
2006-05-18 1:48 ` Alan Cox
2006-05-17 23:49 ` Linus Torvalds
2006-05-16 15:02 ` Jeff Garzik
2006-05-16 3:55 ` Tejun Heo
2006-05-16 4:37 ` Avuton Olrich
2006-05-17 2:05 ` Andrew Morton
2006-05-17 4:49 ` Tejun Heo
2006-05-17 4:56 ` Andrew Morton
2006-05-17 5:14 ` Tejun Heo
2006-05-17 6:35 ` Tejun Heo
2006-05-18 11:24 ` Albert Lee
2006-05-18 11:33 ` Tejun Heo
2006-05-19 10:37 ` Albert Lee
2006-05-19 11:03 ` Tejun Heo
2006-05-18 23:07 ` Andrew Morton
2006-05-19 1:14 ` Tejun Heo
2006-05-19 2:06 ` Jeff Garzik
2006-05-19 2:16 ` Tejun Heo
2006-05-22 7:22 ` Jeff Garzik
[not found] <6cOK9-5WZ-21@gated-at.bofh.it>
[not found] ` <6cUPu-6Dh-5@gated-at.bofh.it>
[not found] ` <6cV8V-71t-3@gated-at.bofh.it>
[not found] ` <6cYzI-3yr-3@gated-at.bofh.it>
[not found] ` <6cYT8-3Vy-7@gated-at.bofh.it>
[not found] ` <6cZvL-4Vb-1@gated-at.bofh.it>
2006-05-16 5:33 ` Robert Hancock
-- strict thread matches above, loose matches on Subject: below --
2006-05-17 7:35 Matthieu CASTET
2006-05-18 0:36 Brown, Len
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060515234743.GD4699@animx.eu.org \
--to=wakko@animx.eu.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox