From: David Brownell <david-b@pacbell.net>
To: jffs-dev@axis.com
Cc: dwmw2@infradead.org, Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Re: jffs2 build fixes
Date: Tue, 16 May 2006 07:55:37 -0700 [thread overview]
Message-ID: <200605160755.38606.david-b@pacbell.net> (raw)
In-Reply-To: <200604010831.57875.david-b@pacbell.net>
[-- Attachment #1: Type: text/plain, Size: 368 bytes --]
On Saturday 01 April 2006 8:31 am, David Brownell wrote:
> against today's GIT; there's a section error and
> several printk format warnings. x86_64.
I see that Andrew also got tired of such printk warnings, so his
fix is now in the kernel.org tree ... here's a resend of this
patch, updated against today's GIT by removing two of the printk
warning fixes.
- Dave
[-- Attachment #2: build.patch --]
[-- Type: text/x-diff, Size: 2768 bytes --]
Resolve some JFFS2 build problems:
(a) section mismatch error
(b) wrong printk format warnings
The section mismatch issue was fixed by making a few more routines as
belonging in init or exit sections, but there are more routines that
could (should!) get such annotations.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Index: g26/fs/jffs2/compr.c
===================================================================
--- g26.orig/fs/jffs2/compr.c 2006-05-12 18:48:21.000000000 -0700
+++ g26/fs/jffs2/compr.c 2006-05-12 19:40:08.000000000 -0700
@@ -412,7 +412,7 @@ void jffs2_free_comprbuf(unsigned char *
kfree(comprbuf);
}
-int jffs2_compressors_init(void)
+int __init jffs2_compressors_init(void)
{
/* Registering compressors */
#ifdef CONFIG_JFFS2_ZLIB
@@ -440,7 +440,7 @@ int jffs2_compressors_init(void)
return 0;
}
-int jffs2_compressors_exit(void)
+int __exit jffs2_compressors_exit(void)
{
/* Unregistering compressors */
#ifdef CONFIG_JFFS2_RUBIN
Index: g26/fs/jffs2/compr_zlib.c
===================================================================
--- g26.orig/fs/jffs2/compr_zlib.c 2006-05-12 18:48:21.000000000 -0700
+++ g26/fs/jffs2/compr_zlib.c 2006-05-12 19:40:08.000000000 -0700
@@ -60,7 +60,7 @@ static int __init alloc_workspaces(void)
return 0;
}
-static void free_workspaces(void)
+static void __exit free_workspaces(void)
{
vfree(def_strm.workspace);
vfree(inf_strm.workspace);
@@ -216,7 +216,7 @@ int __init jffs2_zlib_init(void)
return ret;
}
-void jffs2_zlib_exit(void)
+void __exit jffs2_zlib_exit(void)
{
jffs2_unregister_compressor(&jffs2_zlib_comp);
free_workspaces();
Index: g26/fs/jffs2/readinode.c
===================================================================
--- g26.orig/fs/jffs2/readinode.c 2006-05-12 18:48:21.000000000 -0700
+++ g26/fs/jffs2/readinode.c 2006-05-12 19:40:08.000000000 -0700
@@ -204,7 +204,7 @@ static inline int read_dnode(struct jffs
tn = jffs2_alloc_tmp_dnode_info();
if (!tn) {
- JFFS2_ERROR("failed to allocate tn (%d bytes).\n", sizeof(*tn));
+ JFFS2_ERROR("failed to allocate tn (%zd bytes).\n", sizeof(*tn));
return -ENOMEM;
}
@@ -434,7 +434,7 @@ static int read_more(struct jffs2_sb_inf
}
if (retlen < len) {
- JFFS2_ERROR("short read at %#08x: %d instead of %d.\n",
+ JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n",
offs, retlen, len);
return -EIO;
}
@@ -542,7 +542,8 @@ static int jffs2_get_inode_nodes(struct
}
if (retlen < len) {
- JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ref_offset(ref), retlen, len);
+ JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n",
+ ref_offset(ref), retlen, len);
err = -EIO;
goto free_out;
}
next parent reply other threads:[~2006-05-16 14:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200604010831.57875.david-b@pacbell.net>
2006-05-16 14:55 ` David Brownell [this message]
2006-05-16 15:08 ` jffs2 build fixes David Woodhouse
2006-05-25 4:02 ` David Brownell
2006-05-16 15:09 ` Jörn Engel
2006-05-16 15:25 ` David Brownell
2006-05-16 15:33 ` Jörn Engel
2006-05-16 15:34 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200605160755.38606.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=dwmw2@infradead.org \
--cc=jffs-dev@axis.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox