public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* zd1201 failure on sharp zaurus explained
@ 2006-05-30 13:20 Pavel Machek
  2006-05-30 14:11 ` Oliver Neukum
  0 siblings, 1 reply; 3+ messages in thread
From: Pavel Machek @ 2006-05-30 13:20 UTC (permalink / raw)
  To: rpurdie, lenz, kernel list, Russell King, Netdev list,
	Jirka Lenost Benc, pe1rxq

Hi!

Now I found out what went wrong with zd1201 on sharp zaurus (spitz)...

Card is detected and seems to work okay, except that you don't get any
results from iwlist eth1 scan, and card generally does not do anything
involving radio.

And now I have an explanation, too:

If you plug card directly to zaurus, above is what happens.

If you plug it into the hub, hub flashes the lights and shuts down, as
if not enough power is available from the zaurus.

...which is probably the case, because if I connect external 6V power
supply to the hub, it all starts to work.

So... it is

1) hw problem: spitz power supply is not strong enough to drive zd1201

2) usb problem, probably. Should not usb core detect that card
requires too much juice and refuse to power it up?

...and the morale is, always put hub between device and the host so
that you can see the flashy leds :-).
								Pavel 
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2006-05-30 14:50 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-30 13:20 zd1201 failure on sharp zaurus explained Pavel Machek
2006-05-30 14:11 ` Oliver Neukum
2006-05-30 14:49   ` Pavel Machek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox