From: Arkadiusz Miskiewicz <arekm@pld-linux.org>
To: Jean Tourrilhes <jt@hpl.hp.com>
Cc: linux-kernel@vger.kernel.org
Subject: thinkpad z60m and nsc-ircc
Date: Sun, 25 Jun 2006 11:47:11 +0200 [thread overview]
Message-ID: <200606251147.11694.arekm@pld-linux.org> (raw)
Hi,
I've just upgraded kernel to todays 2.6.17 git version which has some of
nsc-ircc patches merged.
Unfortunately nsc-ircc stopped working for me after this upgrade:
hci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[c0001000-c00017ff]
Max Packet=[2048] IR/IT contexts=[4/4]
usb 2-1: new low speed USB device using uhci_hcd and address 2
Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c]
pnp: Unable to assign resources to device 00:09.
nsc-ircc: probe of 00:09 failed with error -16
nsc-ircc, Found chip at base=0x164e
nsc-ircc, Wrong chip version ff
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
In earlier version (2.6.17 rc X) it was:
pnp: Device 00:09 activated.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
my modprobe setup is:
alias irda0 nsc-ircc
options nsc-ircc dongle_id=0x09 io=0x2f8 irq=3 dma=3
install nsc-ircc /bin/setserial /dev/ttyS1 uart none port 0 irq
0; /sbin/modprobe --ignore-install nsc-ircc
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
reply other threads:[~2006-06-25 9:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606251147.11694.arekm@pld-linux.org \
--to=arekm@pld-linux.org \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox