From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932220AbWFYJrT (ORCPT ); Sun, 25 Jun 2006 05:47:19 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932226AbWFYJrS (ORCPT ); Sun, 25 Jun 2006 05:47:18 -0400 Received: from outgoing3.smtp.agnat.pl ([193.239.44.85]:28852 "EHLO outgoing3.smtp.agnat.pl") by vger.kernel.org with ESMTP id S932220AbWFYJrS convert rfc822-to-8bit (ORCPT ); Sun, 25 Jun 2006 05:47:18 -0400 From: Arkadiusz Miskiewicz Organization: SelfOrganizing To: Jean Tourrilhes Subject: thinkpad z60m and nsc-ircc Date: Sun, 25 Jun 2006 11:47:11 +0200 User-Agent: KMail/1.9.3 Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200606251147.11694.arekm@pld-linux.org> X-Authenticated-Id: arekm Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I've just upgraded kernel to todays 2.6.17 git version which has some of nsc-ircc patches merged. Unfortunately nsc-ircc stopped working for me after this upgrade: hci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[c0001000-c00017ff] Max Packet=[2048] IR/IT contexts=[4/4] usb 2-1: new low speed USB device using uhci_hcd and address 2 Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c] pnp: Unable to assign resources to device 00:09. nsc-ircc: probe of 00:09 failed with error -16 nsc-ircc, Found chip at base=0x164e nsc-ircc, Wrong chip version ff Yenta: ISA IRQ mask 0x04b8, PCI irq 169 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff In earlier version (2.6.17 rc X) it was: pnp: Device 00:09 activated. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x164e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 my modprobe setup is: alias irda0 nsc-ircc options nsc-ircc dongle_id=0x09 io=0x2f8 irq=3 dma=3 install nsc-ircc /bin/setserial /dev/ttyS1 uart none port 0 irq 0; /sbin/modprobe --ignore-install nsc-ircc -- Arkadiusz Mi¶kiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/