From: Sergey Vlasov <vsu@altlinux.ru>
To: "Scott J. Harmon" <harmon@ksu.edu>
Cc: linux-kernel@vger.kernel.org, Chris Wedgwood <cw@f00f.org>
Subject: Re: acpi gets wrong interrupt for via sata in 2.6.16.17
Date: Sun, 25 Jun 2006 13:24:57 +0400 [thread overview]
Message-ID: <20060625132457.4b0922b4.vsu@altlinux.ru> (raw)
In-Reply-To: <449DE6BA.2050206@ksu.edu>
[-- Attachment #1: Type: text/plain, Size: 2504 bytes --]
On Sat, 24 Jun 2006 20:28:26 -0500 Scott J. Harmon wrote:
> The short: something that came in 2.6.16.17 has caused my sata to no
> longer work correctly (by work correctly, I mean actually be able to
> detect any drives). I'm no expert, but it seems that it is getting the
> wrong interrupt. In 2.6.16.16 it works fine with the exact same config.
> It also works fine if I append 'pci=noacpi'. This has still happens in
> 2.6.17.
I assume that your root filesystem is on a SATA disk, and therefore you
don't have an easy way to extract dmesg from a broken kernel?
> Here is the output of lspci:
>
> scott@amdg:~$ /sbin/lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
> Host Bridge (rev 80)
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:07.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705
> Gigabit Ethernet (rev 03)
> 00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 46)
> 00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80)
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> 01:00.0 VGA compatible controller: nVidia Corporation NV15DDR [GeForce2
> Ti] (rev a4)
Try to revert these patches:
http://kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff_plain;h=dc0f369552b491d1578e8a8c6f6512e17246241c
http://kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff_plain;h=c72493379d4aaac49ad3366987db1e118bb4f5ba
(revert in the above order - these are two patches which depend on each
other, you need to revert both). You can try it both with 2.6.16.17
and 2.6.17.
Chris: seems that the SATA subdevice (1106:3149) also needs the quirk,
like EHCI, sound and builtin network.
[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]
next prev parent reply other threads:[~2006-06-25 9:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-25 1:28 acpi gets wrong interrupt for via sata in 2.6.16.17 Scott J. Harmon
2006-06-25 9:24 ` Sergey Vlasov [this message]
2006-06-26 3:58 ` Scott J. Harmon
2006-06-28 0:04 ` Scott J. Harmon
2006-07-07 0:30 ` Scott J. Harmon
2006-07-07 1:14 ` Andrew Morton
2006-07-07 3:47 ` Chris Wedgwood
2006-07-07 3:55 ` Andrew Morton
2006-09-01 3:07 ` Scott J. Harmon
2006-09-01 3:11 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060625132457.4b0922b4.vsu@altlinux.ru \
--to=vsu@altlinux.ru \
--cc=cw@f00f.org \
--cc=harmon@ksu.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox