From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030263AbWF0SaP (ORCPT ); Tue, 27 Jun 2006 14:30:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030272AbWF0SaO (ORCPT ); Tue, 27 Jun 2006 14:30:14 -0400 Received: from ns.virtualhost.dk ([195.184.98.160]:15683 "EHLO virtualhost.dk") by vger.kernel.org with ESMTP id S1030269AbWF0SaM (ORCPT ); Tue, 27 Jun 2006 14:30:12 -0400 Date: Tue, 27 Jun 2006 20:31:47 +0200 From: Jens Axboe To: Dave Jones , linux-kernel@vger.kernel.org Subject: Re: 2.6.17-git broke suspend! Message-ID: <20060627183146.GC32115@suse.de> References: <20060627181045.GA32115@suse.de> <20060627182014.GB7914@redhat.com> <20060627182646.GB32115@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060627182646.GB32115@suse.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Jun 27 2006, Jens Axboe wrote: > I'll boot the older kernel and do a dmesg diff as well... New ACPI, perhaps that is it? --- old-dmesg 2006-06-27 20:26:52.000000000 +0200 +++ new-dmesg 2006-06-27 20:23:14.000000000 +0200 @@ -1,5 +1,4 @@ - BIOS-e820: 000000005fee0000 - 000000005fef5000 (ACPI data) - BIOS-e820: 000000005fef5000 - 000000005ff00000 (ACPI NVS) +00000005fef5000 - 000000005ff00000 (ACPI NVS) BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) @@ -38,24 +37,23 @@ Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) -Built 1 zonelists -Kernel command line: root=/dev/sda1 vga=0x342 libata.atapi_enabled=1 libata.bridge_limits=0 resume=/dev/sda7 +Detected 798.110 MHz processor. +Built 1 zonelists. Total pages: 392928 +Kernel command line: root=/dev/sda1 vga=0x342 libata.atapi_enabled=1 libata.bridge_limits=0 resume=/dev/sda7 fcache.disable=1 Unknown boot option `libata.bridge_limits=0': ignoring mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 -CPU 0 irqstacks, hard=78375000 soft=78374000 +CPU 0 irqstacks, hard=78380000 soft=7837f000 PID hash table entries: 4096 (order: 12, 16384 bytes) -Detected 798.213 MHz processor. -Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) -Memory: 1554664k/1571712k available (1708k kernel code, 16580k reserved, 646k data, 132k init, 0k highmem) +Memory: 1554624k/1571712k available (1740k kernel code, 16620k reserved, 658k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 1597.95 BogoMIPS (lpj=798975) +Calibrating delay using timer specific routine.. 1597.30 BogoMIPS (lpj=798654) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 @@ -66,13 +64,13 @@ Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed +ACPI: Core revision 20060608 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources -ACPI: Subsystem revision 20060127 ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing @@ -101,6 +99,7 @@ Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices +Intel 82802 RNG detected SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub @@ -145,18 +144,15 @@ Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) -ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] -ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] -ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] @@ -165,15 +161,16 @@ vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 5742k, total 65472k vesafb: mode is 1400x1050x16, linelength=2800, pages=21 vesafb: protected mode interface info at c000:5b55 +vesafb: pmi: set display start = 780c5bc3, set palette = 780c5bfd +vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 175x65 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac -hw_random hardware driver 1.0.0 loaded Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled -pnp: Device 00:09 activated. -00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A +pnp: Unable to assign resources to device 00:09. +serial: probe of 00:09 failed with error -16 ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 libata version 1.30 loaded. ata_piix 0000:00:1f.2: version 1.10 @@ -208,93 +202,97 @@ TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 -ieee80211: 802.11 data/management/control stack, git-1.1.7 +ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' Using IPI Shortcut mode -ACPI wakeup devices: - LID SLPB UART EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 AC9M -ACPI: (supports S0 S3 S4 S5) +ACPI: (supports<6>Time: tsc clocksource has been installed. + S0 S3 S4 S5) input: AT Translated Set 2 keyboard as /class/input/input0 +EXT3-fs: INFO: recovery required on readonly filesystem. +EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds +EXT3-fs: sda1: orphan cleanup on readonly fs +ext3_orphan_cleanup: deleting unreferenced inode 883340 +EXT3-fs: sda1: 1 orphan inode deleted +EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input1 EXT3 FS on sda1, internal journal -sd 0:0:0:0: Attached scsi generic sg0 type 0 +Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 -ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 20 -PCI: Setting latency timer of device 0000:00:1d.7 to 64 -ehci_hcd 0000:00:1d.7: EHCI Host Controller -ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 -ehci_hcd 0000:00:1d.7: debug port 1 -PCI: cache line size of 32 is not supported by device 0000:00:1d.7 -ehci_hcd 0000:00:1d.7: irq 20, io mem 0xa8000000 -ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 -usb usb1: configuration #1 chosen from 1 choice -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 8 ports detected -ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 +ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2k ipw2200: Copyright(c) 2003-2006 Intel Corporation +Yenta: ISA IRQ mask 0x04b8, PCI irq 16 +Socket status: 30000006 USB Universal Host Controller Interface driver v3.0 -tg3.c:v3.59 (June 8, 2006) +pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff +pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff +pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff +ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 20 +ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection +sd 0:0:0:0: Attached scsi generic sg0 type 0 +ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) +tg3.c:v3.60 (June 17, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 -eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:10:c6:dd:56:af -eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] -eth0: dma_rwctrl[76180000] dma_mask[64-bit] -ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21 -ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection +eth1: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:10:c6:dd:56:af +eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] +eth1: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller -uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 +uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 +usb usb1: configuration #1 chosen from 1 choice +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 2 ports detected +ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 +PCI: Setting latency timer of device 0000:00:1d.1 to 64 +uhci_hcd 0000:00:1d.1: UHCI Host Controller +uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 +uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 -PCI: Setting latency timer of device 0000:00:1d.1 to 64 -uhci_hcd 0000:00:1d.1: UHCI Host Controller -uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 -uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820 +ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 +PCI: Setting latency timer of device 0000:00:1d.2 to 64 +uhci_hcd 0000:00:1d.2: UHCI Host Controller +uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 +uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 -PCI: Setting latency timer of device 0000:00:1d.2 to 64 -uhci_hcd 0000:00:1d.2: UHCI Host Controller -uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 -uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001840 +ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 +PCI: Setting latency timer of device 0000:00:1d.3 to 64 +uhci_hcd 0000:00:1d.3: UHCI Host Controller +uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 +uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20 -PCI: Setting latency timer of device 0000:00:1d.3 to 64 -uhci_hcd 0000:00:1d.3: UHCI Host Controller -uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 -uhci_hcd 0000:00:1d.3: irq 20, io base 0x00001860 +ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 +PCI: Setting latency timer of device 0000:00:1d.7 to 64 +ehci_hcd 0000:00:1d.7: EHCI Host Controller +ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 +ehci_hcd 0000:00:1d.7: debug port 1 +PCI: cache line size of 32 is not supported by device 0000:00:1d.7 +ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa8000000 +ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found -hub 5-0:1.0: 2 ports detected -usb 4-2: new full speed USB device using uhci_hcd and address 2 -ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) -ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 -Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] -usb 4-2: configuration #1 chosen from 1 choice -Yenta: ISA IRQ mask 0x04b8, PCI irq 16 -Socket status: 30000006 -pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff -pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff -pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff +hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1e.2 to 64 -intel8x0_measure_ac97_clock: measured 50401 usecs +usb 3-2: new full speed USB device using uhci_hcd and address 3 +usb 3-2: configuration #1 chosen from 1 choice +intel8x0_measure_ac97_clock: measured 50410 usecs intel8x0: clocking to 48000 loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds @@ -309,10 +307,12 @@ ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU] (supports 8 throttling states) -ACPI: Thermal Zone [THM0] (47 C) +Time: acpi_pm clocksource has been installed. +ACPI: Thermal Zone [THM0] (46 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.12a ibm_acpi: http://ibm-acpi.sf.net/ ibm_acpi: bay device not present +PM: Writing back config space on device 0000:02:00.0 at offset c (was fcff0000, writing 0) NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver -- Jens Axboe