From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>, Ingo Molnar <mingo@elte.hu>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
David Miller <davem@davemloft.net>,
lethal@linux-sh.org
Subject: [RFC][patch 19/44] SH: Use the new IRQF_ constansts
Date: Sat, 01 Jul 2006 14:54:41 -0000 [thread overview]
Message-ID: <20060701145225.418238000@cruncher.tec.linutronix.de> (raw)
In-Reply-To: 20060701145211.856500000@cruncher.tec.linutronix.de
[-- Attachment #1: irqflags-sh.patch --]
[-- Type: text/plain, Size: 9584 bytes --]
Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/sh/boards/snapgear/setup.c | 2 +-
arch/sh/cchips/hd6446x/hd64461/setup.c | 2 +-
arch/sh/cchips/hd6446x/hd64465/gpio.c | 2 +-
arch/sh/cchips/hd6446x/hd64465/setup.c | 2 +-
arch/sh/cchips/voyagergx/irq.c | 2 +-
arch/sh/drivers/dma/dma-g2.c | 2 +-
arch/sh/drivers/dma/dma-pvr2.c | 2 +-
arch/sh/drivers/dma/dma-sh.c | 4 ++--
arch/sh/drivers/pci/pci-st40.c | 2 +-
arch/sh/kernel/timers/timer-tmu.c | 2 +-
include/asm-sh/floppy.h | 9 ++++-----
include/asm-sh/mpc1211/keyboard.h | 2 +-
include/asm-sh/signal.h | 2 --
13 files changed, 16 insertions(+), 19 deletions(-)
Index: linux-2.6.git/include/asm-sh/floppy.h
===================================================================
--- linux-2.6.git.orig/include/asm-sh/floppy.h 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/include/asm-sh/floppy.h 2006-07-01 16:51:36.000000000 +0200
@@ -146,12 +146,11 @@ static int vdma_get_dma_residue(unsigned
static int fd_request_irq(void)
{
if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
- "floppy", NULL);
+ return request_irq(FLOPPY_IRQ, floppy_hardint,
+ IRQF_DISABLED, "floppy", NULL);
else
- return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
- "floppy", NULL);
-
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
}
static unsigned long dma_mem_alloc(unsigned long size)
Index: linux-2.6.git/include/asm-sh/signal.h
===================================================================
--- linux-2.6.git.orig/include/asm-sh/signal.h 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/include/asm-sh/signal.h 2006-07-01 16:51:36.000000000 +0200
@@ -75,7 +75,6 @@ typedef unsigned long sigset_t;
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
@@ -95,7 +94,6 @@ typedef unsigned long sigset_t;
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
Index: linux-2.6.git/include/asm-sh/mpc1211/keyboard.h
===================================================================
--- linux-2.6.git.orig/include/asm-sh/mpc1211/keyboard.h 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/include/asm-sh/mpc1211/keyboard.h 2006-07-01 16:51:36.000000000 +0200
@@ -57,7 +57,7 @@ extern unsigned char pckbd_sysrq_xlate[1
#define AUX_IRQ 12
#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, SA_SHIRQ, "PS2 Mouse", dev_id)
+ request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
Index: linux-2.6.git/arch/sh/boards/snapgear/setup.c
===================================================================
--- linux-2.6.git.orig/arch/sh/boards/snapgear/setup.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/boards/snapgear/setup.c 2006-07-01 16:51:36.000000000 +0200
@@ -50,7 +50,7 @@ static int __init eraseconfig_init(void)
{
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(IRL0_IRQ, eraseconfig_interrupt, SA_INTERRUPT,
+ if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
"Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
IRL0_IRQ);
Index: linux-2.6.git/arch/sh/cchips/hd6446x/hd64461/setup.c
===================================================================
--- linux-2.6.git.orig/arch/sh/cchips/hd6446x/hd64461/setup.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/cchips/hd6446x/hd64461/setup.c 2006-07-01 16:51:36.000000000 +0200
@@ -133,7 +133,7 @@ int hd64461_irq_demux(int irq)
return __irq_demux(irq);
}
-static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64461", NULL, NULL };
+static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL };
int __init setup_hd64461(void)
{
Index: linux-2.6.git/arch/sh/cchips/hd6446x/hd64465/gpio.c
===================================================================
--- linux-2.6.git.orig/arch/sh/cchips/hd6446x/hd64465/gpio.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/cchips/hd6446x/hd64465/gpio.c 2006-07-01 16:51:36.000000000 +0200
@@ -170,7 +170,7 @@ static int __init hd64465_gpio_init(void
if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
return -EBUSY;
if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
- SA_INTERRUPT, MODNAME, 0))
+ IRQF_DISABLED, MODNAME, 0))
goto out_irqfailed;
printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
Index: linux-2.6.git/arch/sh/cchips/hd6446x/hd64465/setup.c
===================================================================
--- linux-2.6.git.orig/arch/sh/cchips/hd6446x/hd64465/setup.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/cchips/hd6446x/hd64465/setup.c 2006-07-01 16:51:36.000000000 +0200
@@ -153,7 +153,7 @@ int hd64465_irq_demux(int irq)
return irq;
}
-static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL};
+static struct irqaction irq0 = { hd64465_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64465", NULL, NULL};
static int __init setup_hd64465(void)
Index: linux-2.6.git/arch/sh/cchips/voyagergx/irq.c
===================================================================
--- linux-2.6.git.orig/arch/sh/cchips/voyagergx/irq.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/cchips/voyagergx/irq.c 2006-07-01 16:51:36.000000000 +0200
@@ -165,7 +165,7 @@ int voyagergx_irq_demux(int irq)
static struct irqaction irq0 = {
.name = "voyagergx",
.handler = voyagergx_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
Index: linux-2.6.git/arch/sh/drivers/dma/dma-g2.c
===================================================================
--- linux-2.6.git.orig/arch/sh/drivers/dma/dma-g2.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/drivers/dma/dma-g2.c 2006-07-01 16:51:36.000000000 +0200
@@ -56,7 +56,7 @@ static irqreturn_t g2_dma_interrupt(int
static struct irqaction g2_dma_irq = {
.name = "g2 DMA handler",
.handler = g2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static int g2_enable_dma(struct dma_channel *chan)
Index: linux-2.6.git/arch/sh/drivers/dma/dma-pvr2.c
===================================================================
--- linux-2.6.git.orig/arch/sh/drivers/dma/dma-pvr2.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/drivers/dma/dma-pvr2.c 2006-07-01 16:51:36.000000000 +0200
@@ -70,7 +70,7 @@ static int pvr2_xfer_dma(struct dma_chan
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
Index: linux-2.6.git/arch/sh/drivers/dma/dma-sh.c
===================================================================
--- linux-2.6.git.orig/arch/sh/drivers/dma/dma-sh.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/drivers/dma/dma-sh.c 2006-07-01 16:51:36.000000000 +0200
@@ -90,7 +90,7 @@ static int sh_dmac_request_dma(struct dm
chan->chan);
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- SA_INTERRUPT, name, chan);
+ IRQF_DISABLED, name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -258,7 +258,7 @@ static int __init sh_dmac_init(void)
#ifdef CONFIG_CPU_SH4
make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
- i = request_irq(DMAE_IRQ, dma_err, SA_INTERRUPT, "DMAC Address Error", 0);
+ i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (i < 0)
return i;
#endif
Index: linux-2.6.git/arch/sh/drivers/pci/pci-st40.c
===================================================================
--- linux-2.6.git.orig/arch/sh/drivers/pci/pci-st40.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/drivers/pci/pci-st40.c 2006-07-01 16:51:36.000000000 +0200
@@ -447,7 +447,7 @@ static int __init pcibios_init(void)
PHYSADDR(memory_end) - PHYSADDR(memory_start));
if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq,
- SA_INTERRUPT, "st40pci", NULL)) {
+ IRQF_DISABLED, "st40pci", NULL)) {
printk(KERN_ERR "st40pci: Cannot hook interrupt\n");
return -EIO;
}
Index: linux-2.6.git/arch/sh/kernel/timers/timer-tmu.c
===================================================================
--- linux-2.6.git.orig/arch/sh/kernel/timers/timer-tmu.c 2006-07-01 16:51:23.000000000 +0200
+++ linux-2.6.git/arch/sh/kernel/timers/timer-tmu.c 2006-07-01 16:51:36.000000000 +0200
@@ -107,7 +107,7 @@ static irqreturn_t tmu_timer_interrupt(i
static struct irqaction tmu_irq = {
.name = "timer",
.handler = tmu_timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
--
next prev parent reply other threads:[~2006-07-01 15:11 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-01 14:54 [RFC][patch 00/44] Consolidate irq_action flags Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 01/44] Consolidate flags for request_irq Thomas Gleixner
2006-07-02 0:49 ` Andrew Morton
2006-07-02 13:09 ` Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 02/44] ALPHA: Use the new IRQF_ constansts Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 03/44] ARM26: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 04/44] ARM: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 05/44] CHRIS: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 06/44] FRV: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 07/44] H8300: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 08/44] I386: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 09/44] IA64: " Thomas Gleixner
2006-07-03 11:36 ` Jes Sorensen
2006-07-03 11:56 ` Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 10/44] M32R: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 11/44] M68KNOMMU: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 12/44] M68K: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 13/44] MIPS: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 14/44] PARISC: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 15/44] POWERPC: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 16/44] PPC: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 17/44] S390: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 18/44] SH64: " Thomas Gleixner
2006-07-01 14:54 ` Thomas Gleixner [this message]
2006-07-01 14:54 ` [RFC][patch 20/44] SPARC64: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 21/44] SPARC: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 22/44] UM: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 23/44] V850: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 24/44] x86_64: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 25/44] XTENSA: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 26/44] generic irq: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 27/44] drivers/block " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 28/44] drivers/char: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 29/44] drivers/drm: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 30/44] ide: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 31/44] firewire: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 32/44] isdn: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 33/44] media: " Thomas Gleixner
2006-07-01 14:54 ` [RFC][patch 34/44] misc drivers: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 35/44] drivers/net: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 36/44] PARISC: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 37/44] pci: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 38/44] rio: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 39/44] scsi: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 40/44] serial: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 41/44] usb: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 42/44] video: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 43/44] sound: " Thomas Gleixner
2006-07-01 14:55 ` [RFC][patch 44/44] Documentation: " Thomas Gleixner
2006-07-01 23:43 ` [RFC][patch 00/44] Consolidate irq_action flags Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060701145225.418238000@cruncher.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=akpm@osdl.org \
--cc=benh@kernel.crashing.org \
--cc=davem@davemloft.net \
--cc=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox