public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drivers/acpi/Kconfig typos
@ 2006-07-05  0:52 Matt LaPlante
  0 siblings, 0 replies; only message in thread
From: Matt LaPlante @ 2006-07-05  0:52 UTC (permalink / raw)
  To: linux-kernel; +Cc: trivial

Three typos in drivers/acpi/Kconfig...

-- 
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
kernel1@cyberdogtech.com

--

--- a/drivers/acpi/Kconfig	2006-07-04 20:18:01.000000000 -0400
+++ b/drivers/acpi/Kconfig	2006-07-04 20:52:34.000000000 -0400
@@ -254,7 +254,7 @@
 	depends on !STANDALONE
 	default n 
 	help
-	  Thist option is to load a custom ACPI DSDT
+	  This option is to load a custom ACPI DSDT
 	  If you don't know what that is, say N.
 
 config ACPI_CUSTOM_DSDT_FILE
@@ -311,7 +311,7 @@
 	  The Power Management Timer is available on all ACPI-capable,
 	  in most cases even if ACPI is unusable or blacklisted.
 
-	  This timing source is not affected by powermanagement features
+	  This timing source is not affected by power management features
 	  like aggressive processor idling, throttling, frequency and/or
 	  voltage scaling, unlike the commonly used Time Stamp Counter
 	  (TSC) timing source.
@@ -346,7 +346,7 @@
 	  Enabling this driver assumes that your platform hardware
 	  and firmware have support for hot-plugging physical memory. If
 	  your system does not support physically adding or ripping out 
-	  memory DIMMs at some platfrom defined granularity (individually 
+	  memory DIMMs at some platform defined granularity (individually 
 	  or as a bank) at runtime, then you need not enable this driver.
 
 	  If one selects "m," this driver can be loaded using the following


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2006-07-05  0:53 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-05  0:52 [PATCH] drivers/acpi/Kconfig typos Matt LaPlante

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox