Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
       [not found] <20060725222209.0048ed15.akpm@osdl.org>
@ 2006-07-26 13:44 ` Michael Buesch
  2006-07-26 14:21   ` gmu 2k6
  2006-07-26 14:23   ` gmu 2k6
  0 siblings, 2 replies; 14+ messages in thread
From: Michael Buesch @ 2006-07-26 13:44 UTC (permalink / raw)
  To: gmu 2k6; +Cc: Andrew Morton, linux-kernel

On Wednesday 26 July 2006 07:22, Andrew Morton wrote:
> with latest HEAD of Linus' tree I got /dev/hwrng but although the device
> exists rngtest does not pass as if hwrng does not work correctly.
> actually this case is documented in the README supplied by Debian
> but I'm surprised to hit the problem.
> 
> I'm just curious whether there's a bug in the driver, the hwrng is bad
> or if it is falsely detected and made accessible via /dev/hwrng.
> 
> rngtest 2-unofficial-mt.10
> Copyright (c) 2004 by Henrique de Moraes Holschuh
> This is free software; see the source for copying conditions.  There
> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
> 
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 200032
> rngtest: FIPS 140-2 successes: 0
> rngtest: FIPS 140-2 failures: 10
> rngtest: FIPS 140-2(2001-10-10) Monobit: 10
> rngtest: FIPS 140-2(2001-10-10) Poker: 10
> rngtest: FIPS 140-2(2001-10-10) Runs: 10
> rngtest: FIPS 140-2(2001-10-10) Long run: 10
> rngtest: FIPS 140-2(2001-10-10) Continuous run: 10
> rngtest: input channel speed: (min=1.132; avg=2.157; max=2.794)Mibits/s
> rngtest: FIPS tests speed: (min=202.909; avg=206.647; max=211.928)Mibits/s
> rngtest: Program run time: 89804 microseconds
> 
> 
> lspci
> 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
> 00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev
> 0c)
> 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> oller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> oller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> oller #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> oller #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Cont
> roller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Brid
> ge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
> (rev 02)
> 01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Con
> troller (rev 01)
> 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Pr
> ocessor (rev 01)
> 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
> 9)
> 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
> 9)
> 03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
> rnet (rev 10)
> 03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
> rnet (rev 10)
> 04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
> 1)
> 05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
> 9)
> 05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
> 9)
> 0a:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 03)
> 0b:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
> 1)


I guess you are running the Intel ICH RNG, right?
As the FIPS test is a hardware test, I would simply say it's
failing hardware. But let's not do this. :) Let's check what
actually comes out of the RNG.
Could you do a
hexdump /dev/hwrng
So we can see what actually comes ot of the device. Let's see
if it's all zeros or something.

Does the RNG work, if you use 2.6.17 or earlier?

-- 
Greetings Michael.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 13:44 ` hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks Michael Buesch
@ 2006-07-26 14:21   ` gmu 2k6
  2006-07-26 14:49     ` Michael Buesch
  2006-07-26 14:23   ` gmu 2k6
  1 sibling, 1 reply; 14+ messages in thread
From: gmu 2k6 @ 2006-07-26 14:21 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Andrew Morton, linux-kernel

On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Wednesday 26 July 2006 07:22, Andrew Morton wrote:
> > with latest HEAD of Linus' tree I got /dev/hwrng but although the device
> > exists rngtest does not pass as if hwrng does not work correctly.
> > actually this case is documented in the README supplied by Debian
> > but I'm surprised to hit the problem.
> >
> > I'm just curious whether there's a bug in the driver, the hwrng is bad
> > or if it is falsely detected and made accessible via /dev/hwrng.
> >
> > rngtest 2-unofficial-mt.10
> > Copyright (c) 2004 by Henrique de Moraes Holschuh
> > This is free software; see the source for copying conditions.  There
> > is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE.
> >
> > rngtest: starting FIPS tests...
> > rngtest: bits received from input: 200032
> > rngtest: FIPS 140-2 successes: 0
> > rngtest: FIPS 140-2 failures: 10
> > rngtest: FIPS 140-2(2001-10-10) Monobit: 10
> > rngtest: FIPS 140-2(2001-10-10) Poker: 10
> > rngtest: FIPS 140-2(2001-10-10) Runs: 10
> > rngtest: FIPS 140-2(2001-10-10) Long run: 10
> > rngtest: FIPS 140-2(2001-10-10) Continuous run: 10
> > rngtest: input channel speed: (min=1.132; avg=2.157; max=2.794)Mibits/s
> > rngtest: FIPS tests speed: (min=202.909; avg=206.647; max=211.928)Mibits/s
> > rngtest: Program run time: 89804 microseconds
> >
> >
> > lspci
> > 00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
> > 00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev
> > 0c)
> > 00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
> > 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> > oller #1 (rev 02)
> > 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> > oller #2 (rev 02)
> > 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> > oller #3 (rev 02)
> > 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
> > oller #4 (rev 02)
> > 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Cont
> > roller (rev 02)
> > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> > 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Brid
> > ge (rev 02)
> > 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
> > (rev 02)
> > 01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> > 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Con
> > troller (rev 01)
> > 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Pr
> > ocessor (rev 01)
> > 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
> > 9)
> > 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
> > 9)
> > 03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
> > rnet (rev 10)
> > 03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
> > rnet (rev 10)
> > 04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
> > 1)
> > 05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
> > 9)
> > 05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
> > 9)
> > 0a:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 03)
> > 0b:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
> > 1)
>
>
> I guess you are running the Intel ICH RNG, right?
> As the FIPS test is a hardware test, I would simply say it's
> failing hardware. But let's not do this. :) Let's check what
> actually comes out of the RNG.
> Could you do a
> hexdump /dev/hwrng
> So we can see what actually comes ot of the device. Let's see
> if it's all zeros or something.
>
> Does the RNG work, if you use 2.6.17 or earlier?

it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
whatever that is which is appended as localversion)

svn:~# hexdump /dev/hwrng
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*

with 2.6.17.6:
svn:~# hexdump /dev/hwrng
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*

this was without any rng-tools installed and no rngd running of course.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 14:21   ` gmu 2k6
@ 2006-07-26 14:49     ` Michael Buesch
  2006-07-26 14:52       ` gmu 2k6
  0 siblings, 1 reply; 14+ messages in thread
From: Michael Buesch @ 2006-07-26 14:49 UTC (permalink / raw)
  To: gmu 2k6, Jeff Garzik, Philipp Rumpf; +Cc: Andrew Morton, linux-kernel

On Wednesday 26 July 2006 16:21, gmu 2k6 wrote:
> it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
> whatever that is which is appended as localversion)
> 
> svn:~# hexdump /dev/hwrng
> 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> *
> 
> with 2.6.17.6:
> svn:~# hexdump /dev/hwrng
> 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> *
> 
> this was without any rng-tools installed and no rngd running of course.

Hm, so I would say the hardware either broken, or intel
changed the way to read the random data from it. But I doubt they
would change something like this on the ICH5.

Who wrote the ICH driver? Jeff? Philipp?
What do you think?

-- 
Greetings Michael.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 14:49     ` Michael Buesch
@ 2006-07-26 14:52       ` gmu 2k6
  2006-07-26 15:30         ` Michael Buesch
  0 siblings, 1 reply; 14+ messages in thread
From: gmu 2k6 @ 2006-07-26 14:52 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Jeff Garzik, Philipp Rumpf, Andrew Morton, linux-kernel

On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Wednesday 26 July 2006 16:21, gmu 2k6 wrote:
> > it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
> > whatever that is which is appended as localversion)
> >
> > svn:~# hexdump /dev/hwrng
> > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > *
> >
> > with 2.6.17.6:
> > svn:~# hexdump /dev/hwrng
> > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > *
> >
> > this was without any rng-tools installed and no rngd running of course.
>
> Hm, so I would say the hardware either broken, or intel
> changed the way to read the random data from it. But I doubt they
> would change something like this on the ICH5.
>
> Who wrote the ICH driver? Jeff? Philipp?
> What do you think?

IIRC it was Jeff.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 14:52       ` gmu 2k6
@ 2006-07-26 15:30         ` Michael Buesch
  2006-07-26 15:42           ` gmu 2k6
  2006-07-26 19:44           ` gmu 2k6
  0 siblings, 2 replies; 14+ messages in thread
From: Michael Buesch @ 2006-07-26 15:30 UTC (permalink / raw)
  To: gmu 2k6; +Cc: Jeff Garzik, Philipp Rumpf, Andrew Morton, linux-kernel

On Wednesday 26 July 2006 16:52, gmu 2k6 wrote:
> On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> > On Wednesday 26 July 2006 16:21, gmu 2k6 wrote:
> > > it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
> > > whatever that is which is appended as localversion)
> > >
> > > svn:~# hexdump /dev/hwrng
> > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > *
> > >
> > > with 2.6.17.6:
> > > svn:~# hexdump /dev/hwrng
> > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > *
> > >
> > > this was without any rng-tools installed and no rngd running of course.
> >
> > Hm, so I would say the hardware either broken, or intel
> > changed the way to read the random data from it. But I doubt they
> > would change something like this on the ICH5.
> >
> > Who wrote the ICH driver? Jeff? Philipp?
> > What do you think?
> 
> IIRC it was Jeff.

"What do you think?" was more a question to Jeff or Philipp ;)



But could you try the following patch on top of latest git?
It's just a random test, but I think it's worth trying.
Let's see if it works around the issue.

Index: linux-2.6/drivers/char/hw_random/intel-rng.c
===================================================================
--- linux-2.6.orig/drivers/char/hw_random/intel-rng.c	2006-06-27 17:48:13.000000000 +0200
+++ linux-2.6/drivers/char/hw_random/intel-rng.c	2006-07-26 17:27:03.000000000 +0200
@@ -104,9 +104,14 @@
 	int err = -EIO;
 
 	hw_status = hwstatus_get(mem);
+	hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
+	hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
+#if 0
+	hw_status = hwstatus_get(mem);
 	/* turn RNG h/w on, if it's off */
 	if ((hw_status & INTEL_RNG_ENABLED) == 0)
 		hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
+#endif
 	if ((hw_status & INTEL_RNG_ENABLED) == 0) {
 		printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
 		goto out;


-- 
Greetings Michael.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 15:30         ` Michael Buesch
@ 2006-07-26 15:42           ` gmu 2k6
  2006-07-26 19:44           ` gmu 2k6
  1 sibling, 0 replies; 14+ messages in thread
From: gmu 2k6 @ 2006-07-26 15:42 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Jeff Garzik, Philipp Rumpf, Andrew Morton, linux-kernel

On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Wednesday 26 July 2006 16:52, gmu 2k6 wrote:
> > On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> > > On Wednesday 26 July 2006 16:21, gmu 2k6 wrote:
> > > > it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
> > > > whatever that is which is appended as localversion)
> > > >
> > > > svn:~# hexdump /dev/hwrng
> > > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > > *
> > > >
> > > > with 2.6.17.6:
> > > > svn:~# hexdump /dev/hwrng
> > > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > > *
> > > >
> > > > this was without any rng-tools installed and no rngd running of course.
> > >
> > > Hm, so I would say the hardware either broken, or intel
> > > changed the way to read the random data from it. But I doubt they
> > > would change something like this on the ICH5.
> > >
> > > Who wrote the ICH driver? Jeff? Philipp?
> > > What do you think?
> >
> > IIRC it was Jeff.
>
> "What do you think?" was more a question to Jeff or Philipp ;)
>
>
>
> But could you try the following patch on top of latest git?
> It's just a random test, but I think it's worth trying.
> Let's see if it works around the issue.
>
> Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> ===================================================================
> --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> @@ -104,9 +104,14 @@
>         int err = -EIO;
>
>         hw_status = hwstatus_get(mem);
> +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#if 0
> +       hw_status = hwstatus_get(mem);
>         /* turn RNG h/w on, if it's off */
>         if ((hw_status & INTEL_RNG_ENABLED) == 0)
>                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#endif
>         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
>                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
>                 goto out;

with that diff applied I still seem to get the same result:
svn:~# hexdump /dev/hwrng
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*

maybe the revision of ICH5 in this HP ProLiant box is borked (IIRC without
going down to the datacenter it should be a ProLiant 380 something bought
last year).

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 15:30         ` Michael Buesch
  2006-07-26 15:42           ` gmu 2k6
@ 2006-07-26 19:44           ` gmu 2k6
  2006-07-27 13:29             ` Michael Buesch
  1 sibling, 1 reply; 14+ messages in thread
From: gmu 2k6 @ 2006-07-26 19:44 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Jeff Garzik, Philipp Rumpf, Andrew Morton, linux-kernel

On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Wednesday 26 July 2006 16:52, gmu 2k6 wrote:
> > On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:
> > > On Wednesday 26 July 2006 16:21, gmu 2k6 wrote:
> > > > it just outputs this and stops with 2.6.18-rc2-HEAD (see dmesg for hashcode or
> > > > whatever that is which is appended as localversion)
> > > >
> > > > svn:~# hexdump /dev/hwrng
> > > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > > *
> > > >
> > > > with 2.6.17.6:
> > > > svn:~# hexdump /dev/hwrng
> > > > 0000000 ffff ffff ffff ffff ffff ffff ffff ffff
> > > > *
> > > >
> > > > this was without any rng-tools installed and no rngd running of course.
> > >
> > > Hm, so I would say the hardware either broken, or intel
> > > changed the way to read the random data from it. But I doubt they
> > > would change something like this on the ICH5.
> > >
> > > Who wrote the ICH driver? Jeff? Philipp?
> > > What do you think?
> >
> > IIRC it was Jeff.
>
> "What do you think?" was more a question to Jeff or Philipp ;)
>
>
>
> But could you try the following patch on top of latest git?
> It's just a random test, but I think it's worth trying.
> Let's see if it works around the issue.
>
> Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> ===================================================================
> --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> @@ -104,9 +104,14 @@
>         int err = -EIO;
>
>         hw_status = hwstatus_get(mem);
> +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#if 0
> +       hw_status = hwstatus_get(mem);
>         /* turn RNG h/w on, if it's off */
>         if ((hw_status & INTEL_RNG_ENABLED) == 0)
>                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#endif
>         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
>                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
>                 goto out;

well as it didn't work, are you sure it was not intended to be more like this:
@@ -104,9 +104,14 @@
       int err = -EIO;

       hw_status = hwstatus_get(mem);
+       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
+       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
+#if 0
       /* turn RNG h/w on, if it's off */
       if ((hw_status & INTEL_RNG_ENABLED) == 0)
               hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
+#endif
       if ((hw_status & INTEL_RNG_ENABLED) == 0) {
               printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
               goto out;

?

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 19:44           ` gmu 2k6
@ 2006-07-27 13:29             ` Michael Buesch
  2006-07-27 14:20               ` gmu 2k6
  0 siblings, 1 reply; 14+ messages in thread
From: Michael Buesch @ 2006-07-27 13:29 UTC (permalink / raw)
  To: gmu 2k6; +Cc: Jeff Garzik, Philipp Rumpf, Andrew Morton, linux-kernel

On Wednesday 26 July 2006 21:44, gmu 2k6 wrote:
> > But could you try the following patch on top of latest git?
> > It's just a random test, but I think it's worth trying.
> > Let's see if it works around the issue.
> >
> > Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> > +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> > @@ -104,9 +104,14 @@
> >         int err = -EIO;
> >
> >         hw_status = hwstatus_get(mem);
> > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > +#if 0
> > +       hw_status = hwstatus_get(mem);
> >         /* turn RNG h/w on, if it's off */
> >         if ((hw_status & INTEL_RNG_ENABLED) == 0)
> >                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > +#endif
> >         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> >                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> >                 goto out;
> 
> well as it didn't work, are you sure it was not intended to be more like this:
> @@ -104,9 +104,14 @@
>        int err = -EIO;
> 
>        hw_status = hwstatus_get(mem);
> +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#if 0
>        /* turn RNG h/w on, if it's off */
>        if ((hw_status & INTEL_RNG_ENABLED) == 0)
>                hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> +#endif
>        if ((hw_status & INTEL_RNG_ENABLED) == 0) {
>                printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
>                goto out;
> 
> ?

I don't think that makes a difference to the generated code, does it?

-- 
Greetings Michael.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-27 13:29             ` Michael Buesch
@ 2006-07-27 14:20               ` gmu 2k6
  2006-07-27 14:32                 ` Michael Buesch
  0 siblings, 1 reply; 14+ messages in thread
From: gmu 2k6 @ 2006-07-27 14:20 UTC (permalink / raw)
  To: Michael Buesch; +Cc: linux-kernel

On 7/27/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Wednesday 26 July 2006 21:44, gmu 2k6 wrote:
> > > But could you try the following patch on top of latest git?
> > > It's just a random test, but I think it's worth trying.
> > > Let's see if it works around the issue.
> > >
> > > Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> > > ===================================================================
> > > --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> > > +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> > > @@ -104,9 +104,14 @@
> > >         int err = -EIO;
> > >
> > >         hw_status = hwstatus_get(mem);
> > > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > +#if 0
> > > +       hw_status = hwstatus_get(mem);
> > >         /* turn RNG h/w on, if it's off */
> > >         if ((hw_status & INTEL_RNG_ENABLED) == 0)
> > >                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > +#endif
> > >         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> > >                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> > >                 goto out;
> >
> > well as it didn't work, are you sure it was not intended to be more like this:
> > @@ -104,9 +104,14 @@
> >        int err = -EIO;
> >
> >        hw_status = hwstatus_get(mem);
> > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > +#if 0
> >        /* turn RNG h/w on, if it's off */
> >        if ((hw_status & INTEL_RNG_ENABLED) == 0)
> >                hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > +#endif
> >        if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> >                printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> >                goto out;
> >
> > ?
>
> I don't think that makes a difference to the generated code, does it?

I will test it now as you seem to be interested in the results.

actually I was just curious what sense it made to do
hw_status = hwstatus_get(mem);
twice, though I'm not informed about the semantics there so I could be wrong
in interpreting the API on that level.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-27 14:20               ` gmu 2k6
@ 2006-07-27 14:32                 ` Michael Buesch
  2006-07-27 15:07                   ` gmu 2k6
  0 siblings, 1 reply; 14+ messages in thread
From: Michael Buesch @ 2006-07-27 14:32 UTC (permalink / raw)
  To: gmu 2k6; +Cc: Jan Beulich, linux-kernel

On Thursday 27 July 2006 16:20, gmu 2k6 wrote:
> On 7/27/06, Michael Buesch <mb@bu3sch.de> wrote:
> > On Wednesday 26 July 2006 21:44, gmu 2k6 wrote:
> > > > But could you try the following patch on top of latest git?
> > > > It's just a random test, but I think it's worth trying.
> > > > Let's see if it works around the issue.
> > > >
> > > > Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> > > > ===================================================================
> > > > --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> > > > +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> > > > @@ -104,9 +104,14 @@
> > > >         int err = -EIO;
> > > >
> > > >         hw_status = hwstatus_get(mem);
> > > > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > > > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > +#if 0
> > > > +       hw_status = hwstatus_get(mem);
> > > >         /* turn RNG h/w on, if it's off */
> > > >         if ((hw_status & INTEL_RNG_ENABLED) == 0)
> > > >                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > +#endif
> > > >         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> > > >                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> > > >                 goto out;
> > >
> > > well as it didn't work, are you sure it was not intended to be more like this:
> > > @@ -104,9 +104,14 @@
> > >        int err = -EIO;
> > >
> > >        hw_status = hwstatus_get(mem);
> > > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > +#if 0
> > >        /* turn RNG h/w on, if it's off */
> > >        if ((hw_status & INTEL_RNG_ENABLED) == 0)
> > >                hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > +#endif
> > >        if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> > >                printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> > >                goto out;
> > >
> > > ?
> >
> > I don't think that makes a difference to the generated code, does it?
> 
> I will test it now as you seem to be interested in the results.
> 
> actually I was just curious what sense it made to do
> hw_status = hwstatus_get(mem);
> twice, though I'm not informed about the semantics there so I could be wrong
> in interpreting the API on that level.

Look at the #if 0. The second hwstatus_get is not going to be compiled, anyway.

But Jan Beulich posted an interresting patch to lkml.
Please test it.
http://marc.theaimsgroup.com/?l=linux-kernel&m=115399953714650&q=raw

-- 
Greetings Michael.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-27 14:32                 ` Michael Buesch
@ 2006-07-27 15:07                   ` gmu 2k6
  0 siblings, 0 replies; 14+ messages in thread
From: gmu 2k6 @ 2006-07-27 15:07 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Jan Beulich, linux-kernel

On 7/27/06, Michael Buesch <mb@bu3sch.de> wrote:
> On Thursday 27 July 2006 16:20, gmu 2k6 wrote:
> > On 7/27/06, Michael Buesch <mb@bu3sch.de> wrote:
> > > On Wednesday 26 July 2006 21:44, gmu 2k6 wrote:
> > > > > But could you try the following patch on top of latest git?
> > > > > It's just a random test, but I think it's worth trying.
> > > > > Let's see if it works around the issue.
> > > > >
> > > > > Index: linux-2.6/drivers/char/hw_random/intel-rng.c
> > > > > ===================================================================
> > > > > --- linux-2.6.orig/drivers/char/hw_random/intel-rng.c   2006-06-27 17:48:13.000000000 +0200
> > > > > +++ linux-2.6/drivers/char/hw_random/intel-rng.c        2006-07-26 17:27:03.000000000 +0200
> > > > > @@ -104,9 +104,14 @@
> > > > >         int err = -EIO;
> > > > >
> > > > >         hw_status = hwstatus_get(mem);
> > > > > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > > > > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > > +#if 0
> > > > > +       hw_status = hwstatus_get(mem);
> > > > >         /* turn RNG h/w on, if it's off */
> > > > >         if ((hw_status & INTEL_RNG_ENABLED) == 0)
> > > > >                 hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > > +#endif
> > > > >         if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> > > > >                 printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> > > > >                 goto out;
> > > >
> > > > well as it didn't work, are you sure it was not intended to be more like this:
> > > > @@ -104,9 +104,14 @@
> > > >        int err = -EIO;
> > > >
> > > >        hw_status = hwstatus_get(mem);
> > > > +       hw_status = hwstatus_set(mem, hw_status & ~INTEL_RNG_ENABLED);
> > > > +       hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > +#if 0
> > > >        /* turn RNG h/w on, if it's off */
> > > >        if ((hw_status & INTEL_RNG_ENABLED) == 0)
> > > >                hw_status = hwstatus_set(mem, hw_status | INTEL_RNG_ENABLED);
> > > > +#endif
> > > >        if ((hw_status & INTEL_RNG_ENABLED) == 0) {
> > > >                printk(KERN_ERR PFX "cannot enable RNG, aborting\n");
> > > >                goto out;
> > > >
> > > > ?
> > >
> > > I don't think that makes a difference to the generated code, does it?
> >
> > I will test it now as you seem to be interested in the results.
> >
> > actually I was just curious what sense it made to do
> > hw_status = hwstatus_get(mem);
> > twice, though I'm not informed about the semantics there so I could be wrong
> > in interpreting the API on that level.
>
> Look at the #if 0. The second hwstatus_get is not going to be compiled, anyway.

yep you're right, originally I caught it as because it won't be
included in the gcc output at all and later on false thought it would
be called twice after a long day of work. maybe I should take more
time when replying to mails :D

> But Jan Beulich posted an interresting patch to lkml.
> Please test it.
> http://marc.theaimsgroup.com/?l=linux-kernel&m=115399953714650&q=raw

I saw that too and was thinking about trying it out, will do so now.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-26 13:44 ` hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks Michael Buesch
  2006-07-26 14:21   ` gmu 2k6
@ 2006-07-26 14:23   ` gmu 2k6
  1 sibling, 0 replies; 14+ messages in thread
From: gmu 2k6 @ 2006-07-26 14:23 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Andrew Morton, linux-kernel

On 7/26/06, Michael Buesch <mb@bu3sch.de> wrote:

[snip]

> I guess you are running the Intel ICH RNG, right?

yes as can be seen in dmesg and lspic output it's ICH5

[snip]

^ permalink raw reply	[flat|nested] 14+ messages in thread

* hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
@ 2006-07-25 19:37 gmu 2k6
  2006-07-25 19:44 ` gmu 2k6
  0 siblings, 1 reply; 14+ messages in thread
From: gmu 2k6 @ 2006-07-25 19:37 UTC (permalink / raw)
  To: linux-kernel

with latest HEAD of Linus' tree I got /dev/hwrng but although the device
exists rngtest does not pass as if hwrng does not work correctly.
actually this case is documented in the README supplied by Debian
but I'm surprised to hit the problem.

I'm just curious whether there's a bug in the driver, the hwrng is bad
or if it is falsely detected and made accessible via /dev/hwrng.

rngtest 2-unofficial-mt.10
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There
is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.

rngtest: starting FIPS tests...
rngtest: bits received from input: 200032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10
rngtest: FIPS 140-2(2001-10-10) Monobit: 10
rngtest: FIPS 140-2(2001-10-10) Poker: 10
rngtest: FIPS 140-2(2001-10-10) Runs: 10
rngtest: FIPS 140-2(2001-10-10) Long run: 10
rngtest: FIPS 140-2(2001-10-10) Continuous run: 10
rngtest: input channel speed: (min=1.132; avg=2.157; max=2.794)Mibits/s
rngtest: FIPS tests speed: (min=202.909; avg=206.647; max=211.928)Mibits/s
rngtest: Program run time: 89804 microseconds


lspci
00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev
0c)
00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Contr
oller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Cont
roller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Brid
ge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02)
01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Con
troller (rev 01)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Pr
ocessor (rev 01)
02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
9)
02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
9)
03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
rnet (rev 10)
03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethe
rnet (rev 10)
04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
1)
05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 0
9)
05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 0
9)
0a:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 03)
0b:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 0
1)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks
  2006-07-25 19:37 gmu 2k6
@ 2006-07-25 19:44 ` gmu 2k6
  0 siblings, 0 replies; 14+ messages in thread
From: gmu 2k6 @ 2006-07-25 19:44 UTC (permalink / raw)
  To: linux-kernel

dmesg
Linux version 2.6.18-rc2-g44eb1231 (root@svn) (gcc version 4.0.4
20060507 (prerelease) (Debian 4.0.3-3)) #1 SMP Tue Jul 25 20:52:47
CEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
 BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
 BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000011bfff000 (usable)
3647MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4f80
NX (Execute Disable) protection: active
On node 0 totalpages: 1163263
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 933887 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 HP                                    ) @ 0x000f4f00
ACPI: XSDT (v001 HP     P51      0x00000002 Ò\x04 0x0000162e) @ 0xdfff3300
ACPI: FADT (v003 HP     P51      0x00000002 Ò\x04 0x0000162e) @ 0xdfff3380
ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò\x04 0x0000162e) @ 0xdfff3140
ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0xdfff31c0
ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0xdfff3200
ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x00000000
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec84400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Detected 3000.441 MHz processor.
Built 1 zonelists.  Total pages: 1163263
Kernel command line: root=/dev/cciss/c0d0p1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec80400)
mapped IOAPIC to ffff9000 (fec84000)
mapped IOAPIC to ffff8000 (fec84400)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4086540k/4653052k available (2358k kernel code, 40996k
reserved, 822k data, 212k init, 3211208k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6004.08 BogoMIPS (lpj=30020413)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180
0000641d 00000000 00000000
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Booting processor 1/6 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.44 BogoMIPS (lpj=30002236)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180
0000641d 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
Total of 2 processors activated (12004.52 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=1085
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=12
Setting up standard PCI resources
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0800-083f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
Intel 82802 RNG detected
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
PCI: Cannot allocate resource region 4 of device 0000:00:1d.2
PCI: Cannot allocate resource region 4 of device 0000:00:1d.3
PCI: Device 0000:00:00.0 not found by BIOS
PCI: Bridge: 0000:02:00.0
  IO window: disabled.
  MEM window: fdd00000-fddfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
  IO window: 4000-4fff
  MEM window: fde00000-fdefffff
  PREFETCH window: e2000000-e20fffff
PCI: Bridge: 0000:00:02.0
  IO window: 4000-4fff
  MEM window: fdd00000-fdefffff
  PREFETCH window: e2000000-e20fffff
PCI: Bridge: 0000:05:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:0a:01.0
  IO window: 5000-5fff
  MEM window: fdf00000-fdffffff
  PREFETCH window: e2100000-e21fffff
PCI: Bridge: 0000:05:00.2
  IO window: 5000-5fff
  MEM window: fdf00000-fdffffff
  PREFETCH window: e2100000-e21fffff
PCI: Bridge: 0000:00:06.0
  IO window: 5000-5fff
  MEM window: fdf00000-fdffffff
  PREFETCH window: e2100000-e21fffff
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-3fff
  MEM window: fbf00000-fcffffff
  PREFETCH window: e2200000-e22fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.2 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:05:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
fuse init (API version 7.7)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: Power Button (FF) [PWRF]
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Getting cpuindex for acpiid 0x2
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
ACPI: Getting cpuindex for acpiid 0x5
ACPI: Getting cpuindex for acpiid 0x7
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 2.6.10)
ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 51 (level, low) -> IRQ 17
cciss0: <0x46> at PCI 0000:04:03.0 IRQ 17 using DAC
      blocks= 71122560 block_size= 512
      heads= 255, sectors= 32, cylinders= 8716

      blocks= 71122560 block_size= 512
      heads= 255, sectors= 32, cylinders= 8716

 cciss/c0d0: p1 p2
ACPI: PCI Interrupt 0000:0b:04.0[A] -> GSI 97 (level, low) -> IRQ 18
cciss1: <0x46> at PCI 0000:0b:04.0 IRQ 18 using DAC
      blocks= 497857920 block_size= 512
      heads= 255, sectors= 32, cylinders= 61012

      blocks= 497857920 block_size= 512
      heads= 255, sectors= 32, cylinders= 61012

 cciss/c1d0: p1 p2
usbcore: registered new driver ub
tg3.c:v3.62 (June 30, 2006)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 19
eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:12:79:a5:7d:ff
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 26 (level, low) -> IRQ 20
eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:12:79:a5:7d:fe
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: DV-W28EW, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2193kB Cache
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfbef0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 23, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00006060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
SCTP: Hash tables configured (established 65536 bind 65536)
Starting balanced_irq
Using IPI Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 212k freed
Time: tsc clocksource has been installed.
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Adding 4313444k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1
across:4313444k
EXT3 FS on cciss/c0d0p1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c1d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c1d0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PM: Writing back config space on device 0000:03:01.0 at offset b (was
164814e4, writing d00e11)
PM: Writing back config space on device 0000:03:01.0 at offset 3 (was
804000, writing 804010)
PM: Writing back config space on device 0000:03:01.0 at offset 2 (was
2000000, writing 2000010)
PM: Writing back config space on device 0000:03:01.0 at offset 1 (was
2b00000, writing 2b00146)
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.

.config
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc2
# Tue Jul 25 20:47:50 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
# CONFIG_MODULES is not set

#
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VIDEO_SELECT is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2006-07-27 15:07 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20060725222209.0048ed15.akpm@osdl.org>
2006-07-26 13:44 ` hwrng on 82801EB/ER (ICH5/ICH5R) fails rngtest checks Michael Buesch
2006-07-26 14:21   ` gmu 2k6
2006-07-26 14:49     ` Michael Buesch
2006-07-26 14:52       ` gmu 2k6
2006-07-26 15:30         ` Michael Buesch
2006-07-26 15:42           ` gmu 2k6
2006-07-26 19:44           ` gmu 2k6
2006-07-27 13:29             ` Michael Buesch
2006-07-27 14:20               ` gmu 2k6
2006-07-27 14:32                 ` Michael Buesch
2006-07-27 15:07                   ` gmu 2k6
2006-07-26 14:23   ` gmu 2k6
2006-07-25 19:37 gmu 2k6
2006-07-25 19:44 ` gmu 2k6

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox