From: Dave Jones <davej@redhat.com>
To: arjan@infradead.org
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@osdl.org>
Subject: deprecate and convert some sleep_on variants.
Date: Tue, 1 Aug 2006 14:06:43 -0400 [thread overview]
Message-ID: <20060801180643.GD22240@redhat.com> (raw)
We've been carrying this for a dogs age in Fedora. It'd be good to get
this in -mm, so that it stands some chance of getting upstreamed at some point.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Dave Jones <davej@redhat.com>
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/block/DAC960.c linux-1070/drivers/block/DAC960.c
--- linux-1060/drivers/block/DAC960.c
+++ linux-1070/drivers/block/DAC960.c
@@ -6132,6 +6132,9 @@ static boolean DAC960_V2_ExecuteUserComm
unsigned long flags;
unsigned char Channel, TargetID, LogicalDriveNumber;
unsigned short LogicalDeviceNumber;
+ wait_queue_t __wait;
+
+ init_waitqueue_entry(&__wait, current);
spin_lock_irqsave(&Controller->queue_lock, flags);
while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
@@ -6314,11 +6317,18 @@ static boolean DAC960_V2_ExecuteUserComm
.SegmentByteCount =
CommandMailbox->ControllerInfo.DataTransferSize;
DAC960_ExecuteCommand(Command);
+ add_wait_queue(&Controller->CommandWaitQueue, &__wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
while (Controller->V2.NewControllerInformation->PhysicalScanActive)
{
DAC960_ExecuteCommand(Command);
- sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
+ schedule_timeout(HZ);
+ set_current_state(TASK_UNINTERRUPTIBLE);
}
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&Controller->CommandWaitQueue, &__wait);
+
DAC960_UserCritical("Discovery Completed\n", Controller);
}
}
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/net/tokenring/ibmtr.c linux-1070/drivers/net/tokenring/ibmtr.c
--- linux-1060/drivers/net/tokenring/ibmtr.c
+++ linux-1070/drivers/net/tokenring/ibmtr.c
@@ -850,6 +850,8 @@ static int tok_init_card(struct net_devi
struct tok_info *ti;
short PIOaddr;
unsigned long i;
+ wait_queue_t __wait;
+ init_waitqueue_entry(&__wait, current);
PIOaddr = dev->base_addr;
ti = (struct tok_info *) dev->priv;
@@ -862,13 +864,18 @@ static int tok_init_card(struct net_devi
current->state=TASK_UNINTERRUPTIBLE;
schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ add_wait_queue(&ti->wait_for_reset, &__wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
outb(0, PIOaddr + ADAPTRESETREL);
#ifdef ENABLE_PAGING
if (ti->page_mask)
writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN);
#endif
writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN);
- i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ);
+ #warning pci posting bug
+ i = schedule_timeout(4 * HZ);
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&ti->wait_for_reset, &__wait);
return i? 0 : -EAGAIN;
}
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/include/linux/wait.h linux-1070/include/linux/wait.h
--- linux-1060/include/linux/wait.h
+++ linux-1070/include/linux/wait.h
@@ -364,10 +364,10 @@ static inline void remove_wait_queue_loc
* They are racy. DO NOT use them, use the wait_event* interfaces above.
* We plan to remove these interfaces during 2.7.
*/
-extern void FASTCALL(sleep_on(wait_queue_head_t *q));
-extern long FASTCALL(sleep_on_timeout(wait_queue_head_t *q,
+extern void __deprecated FASTCALL(sleep_on(wait_queue_head_t *q));
+extern long __deprecated FASTCALL(sleep_on_timeout(wait_queue_head_t *q,
signed long timeout));
-extern void FASTCALL(interruptible_sleep_on(wait_queue_head_t *q));
+extern void __deprecated FASTCALL(interruptible_sleep_on(wait_queue_head_t *q));
extern long FASTCALL(interruptible_sleep_on_timeout(wait_queue_head_t *q,
signed long timeout));
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/kernel/sched.c linux-1070/kernel/sched.c
--- linux-1060/kernel/sched.c
+++ linux-1070/kernel/sched.c
@@ -3118,10 +3118,21 @@ EXPORT_SYMBOL(wait_for_completion_interr
__remove_wait_queue(q, &wait); \
spin_unlock_irqrestore(&q->lock, flags);
+#define SLEEP_ON_BKLCHECK \
+ if (unlikely(!kernel_locked()) && \
+ sleep_on_bkl_warnings < 10) { \
+ sleep_on_bkl_warnings++; \
+ WARN_ON(1); \
+ }
+
+static int sleep_on_bkl_warnings;
+
void fastcall __sched interruptible_sleep_on(wait_queue_head_t *q)
{
SLEEP_ON_VAR
+ SLEEP_ON_BKLCHECK
+
current->state = TASK_INTERRUPTIBLE;
SLEEP_ON_HEAD
@@ -3135,6 +3146,8 @@ long fastcall __sched interruptible_slee
{
SLEEP_ON_VAR
+ SLEEP_ON_BKLCHECK
+
current->state = TASK_INTERRUPTIBLE;
SLEEP_ON_HEAD
@@ -3759,22 +3759,12 @@ interruptible_sleep_on_timeout(wait_queu
}
EXPORT_SYMBOL(interruptible_sleep_on_timeout);
-void fastcall __sched sleep_on(wait_queue_head_t *q)
-{
- SLEEP_ON_VAR
-
- current->state = TASK_UNINTERRUPTIBLE;
-
- SLEEP_ON_HEAD
- schedule();
- SLEEP_ON_TAIL
-}
-EXPORT_SYMBOL(sleep_on);
-
long fastcall __sched sleep_on_timeout(wait_queue_head_t *q, long timeout)
{
SLEEP_ON_VAR
+ SLEEP_ON_BKLCHECK
+
current->state = TASK_UNINTERRUPTIBLE;
SLEEP_ON_HEAD
--
http://www.codemonkey.org.uk
next reply other threads:[~2006-08-01 18:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-01 18:06 Dave Jones [this message]
2006-08-01 18:20 ` deprecate and convert some sleep_on variants Nish Aravamudan
2006-08-01 19:03 ` Steven Rostedt
2006-08-02 1:09 ` Dave Jones
2006-08-02 6:00 ` Rolf Eike Beer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060801180643.GD22240@redhat.com \
--to=davej@redhat.com \
--cc=akpm@osdl.org \
--cc=arjan@infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox