From: Magnus Damm <magnus@valinux.co.jp>
To: linux-kernel@vger.kernel.org
Cc: akpm@osdl.org, Magnus Damm <magnus@valinux.co.jp>, ak@suse.de
Subject: [PATCH 03/06] i386: mark cpu init functions as __cpuinit, data as __cpuinitdata
Date: Wed, 9 Aug 2006 10:03:07 +0900 (JST) [thread overview]
Message-ID: <20060809010355.25458.34804.sendpatchset@cherry.local> (raw)
In-Reply-To: <20060809010345.25458.86096.sendpatchset@cherry.local>
i386: mark cpu init functions as __cpuinit, data as __cpuinitdata
Mark i386-specific cpu init functions as __cpuinit. They are all
only called from arch/i386/common.c:identify_cpu() that already is marked as
__cpuinit. This patch also removes the empty function init_umc().
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
---
amd.c | 2 +-
centaur.c | 20 ++++++++++----------
common.c | 2 +-
cyrix.c | 32 ++++++++++++++++----------------
nexgen.c | 2 +-
rise.c | 2 +-
transmeta.c | 2 +-
umc.c | 6 ------
8 files changed, 31 insertions(+), 37 deletions(-)
--- 0003/arch/i386/kernel/cpu/amd.c
+++ work/arch/i386/kernel/cpu/amd.c 2006-08-09 08:53:37.000000000 +0900
@@ -22,7 +22,7 @@
extern void vide(void);
__asm__(".align 4\nvide: ret");
-static void __init init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
{
u32 l, h;
int mbytes = num_physpages >> (20-PAGE_SHIFT);
--- 0001/arch/i386/kernel/cpu/centaur.c
+++ work/arch/i386/kernel/cpu/centaur.c 2006-08-09 08:53:37.000000000 +0900
@@ -9,7 +9,7 @@
#ifdef CONFIG_X86_OOSTORE
-static u32 __init power2(u32 x)
+static u32 __cpuinit power2(u32 x)
{
u32 s=1;
while(s<=x)
@@ -22,7 +22,7 @@ static u32 __init power2(u32 x)
* Set up an actual MCR
*/
-static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
{
u32 lo, hi;
@@ -40,7 +40,7 @@ static void __init centaur_mcr_insert(in
* Shortcut: We know you can't put 4Gig of RAM on a winchip
*/
-static u32 __init ramtop(void) /* 16388 */
+static u32 __cpuinit ramtop(void) /* 16388 */
{
int i;
u32 top = 0;
@@ -91,7 +91,7 @@ static u32 __init ramtop(void) /* 16388
* Compute a set of MCR's to give maximum coverage
*/
-static int __init centaur_mcr_compute(int nr, int key)
+static int __cpuinit centaur_mcr_compute(int nr, int key)
{
u32 mem = ramtop();
u32 root = power2(mem);
@@ -166,7 +166,7 @@ static int __init centaur_mcr_compute(in
return ct;
}
-static void __init centaur_create_optimal_mcr(void)
+static void __cpuinit centaur_create_optimal_mcr(void)
{
int i;
/*
@@ -189,7 +189,7 @@ static void __init centaur_create_optima
wrmsr(MSR_IDT_MCR0+i, 0, 0);
}
-static void __init winchip2_create_optimal_mcr(void)
+static void __cpuinit winchip2_create_optimal_mcr(void)
{
u32 lo, hi;
int i;
@@ -227,7 +227,7 @@ static void __init winchip2_create_optim
* Handle the MCR key on the Winchip 2.
*/
-static void __init winchip2_unprotect_mcr(void)
+static void __cpuinit winchip2_unprotect_mcr(void)
{
u32 lo, hi;
u32 key;
@@ -239,7 +239,7 @@ static void __init winchip2_unprotect_mc
wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
}
-static void __init winchip2_protect_mcr(void)
+static void __cpuinit winchip2_protect_mcr(void)
{
u32 lo, hi;
@@ -257,7 +257,7 @@ static void __init winchip2_protect_mcr(
#define RNG_ENABLED (1 << 3)
#define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */
-static void __init init_c3(struct cpuinfo_x86 *c)
+static void __cpuinit init_c3(struct cpuinfo_x86 *c)
{
u32 lo, hi;
@@ -303,7 +303,7 @@ static void __init init_c3(struct cpuinf
display_cacheinfo(c);
}
-static void __init init_centaur(struct cpuinfo_x86 *c)
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
enum {
ECX8=1<<1,
--- 0003/arch/i386/kernel/cpu/common.c
+++ work/arch/i386/kernel/cpu/common.c 2006-08-09 08:53:37.000000000 +0900
@@ -36,7 +36,7 @@ struct cpu_dev * cpu_devs[X86_VENDOR_NUM
extern int disable_pse;
-static void default_init(struct cpuinfo_x86 * c)
+static void __cpuinit default_init(struct cpuinfo_x86 * c)
{
/* Not much we can do here... */
/* Check if at least it has cpuid */
--- 0003/arch/i386/kernel/cpu/cyrix.c
+++ work/arch/i386/kernel/cpu/cyrix.c 2006-08-09 08:55:57.000000000 +0900
@@ -52,25 +52,25 @@ static void __cpuinit do_cyrix_devid(uns
* Actually since bugs.h doesn't even reference this perhaps someone should
* fix the documentation ???
*/
-static unsigned char Cx86_dir0_msb __initdata = 0;
+static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
-static char Cx86_model[][9] __initdata = {
+static char Cx86_model[][9] __cpuinitdata = {
"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
"M II ", "Unknown"
};
-static char Cx486_name[][5] __initdata = {
+static char Cx486_name[][5] __cpuinitdata = {
"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
"SRx2", "DRx2"
};
-static char Cx486S_name[][4] __initdata = {
+static char Cx486S_name[][4] __cpuinitdata = {
"S", "S2", "Se", "S2e"
};
-static char Cx486D_name[][4] __initdata = {
+static char Cx486D_name[][4] __cpuinitdata = {
"DX", "DX2", "?", "?", "?", "DX4"
};
-static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __initdata = "12??43";
-static char cyrix_model_mult2[] __initdata = "12233445";
+static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __cpuinitdata = "12??43";
+static char cyrix_model_mult2[] __cpuinitdata = "12233445";
/*
* Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
@@ -82,7 +82,7 @@ static char cyrix_model_mult2[] __initda
extern void calibrate_delay(void) __init;
-static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
{
unsigned long flags;
@@ -107,7 +107,7 @@ static void __init check_cx686_slop(stru
}
-static void __init set_cx86_reorder(void)
+static void __cpuinit set_cx86_reorder(void)
{
u8 ccr3;
@@ -122,7 +122,7 @@ static void __init set_cx86_reorder(void
setCx86(CX86_CCR3, ccr3);
}
-static void __init set_cx86_memwb(void)
+static void __cpuinit set_cx86_memwb(void)
{
u32 cr0;
@@ -137,7 +137,7 @@ static void __init set_cx86_memwb(void)
setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
}
-static void __init set_cx86_inc(void)
+static void __cpuinit set_cx86_inc(void)
{
unsigned char ccr3;
@@ -158,7 +158,7 @@ static void __init set_cx86_inc(void)
* Configure later MediaGX and/or Geode processor.
*/
-static void __init geode_configure(void)
+static void __cpuinit geode_configure(void)
{
unsigned long flags;
u8 ccr3, ccr4;
@@ -184,14 +184,14 @@ static void __init geode_configure(void)
#ifdef CONFIG_PCI
-static struct pci_device_id __initdata cyrix_55x0[] = {
+static struct pci_device_id __cpuinitdata cyrix_55x0[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
{ },
};
#endif
-static void __init init_cyrix(struct cpuinfo_x86 *c)
+static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
@@ -346,7 +346,7 @@ static void __init init_cyrix(struct cpu
/*
* Handle National Semiconductor branded processors
*/
-static void __init init_nsc(struct cpuinfo_x86 *c)
+static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
{
/* There may be GX1 processors in the wild that are branded
* NSC and not Cyrix.
--- 0003/arch/i386/kernel/cpu/nexgen.c
+++ work/arch/i386/kernel/cpu/nexgen.c 2006-08-09 08:53:37.000000000 +0900
@@ -27,7 +27,7 @@ static int __cpuinit deep_magic_nexgen_p
return ret;
}
-static void __init init_nexgen(struct cpuinfo_x86 * c)
+static void __cpuinit init_nexgen(struct cpuinfo_x86 * c)
{
c->x86_cache_size = 256; /* A few had 1 MB... */
}
--- 0001/arch/i386/kernel/cpu/rise.c
+++ work/arch/i386/kernel/cpu/rise.c 2006-08-09 08:53:37.000000000 +0900
@@ -5,7 +5,7 @@
#include "cpu.h"
-static void __init init_rise(struct cpuinfo_x86 *c)
+static void __cpuinit init_rise(struct cpuinfo_x86 *c)
{
printk("CPU: Rise iDragon");
if (c->x86_model > 2)
--- 0003/arch/i386/kernel/cpu/transmeta.c
+++ work/arch/i386/kernel/cpu/transmeta.c 2006-08-09 08:53:37.000000000 +0900
@@ -5,7 +5,7 @@
#include <asm/msr.h>
#include "cpu.h"
-static void __init init_transmeta(struct cpuinfo_x86 *c)
+static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
{
unsigned int cap_mask, uk, max, dummy;
unsigned int cms_rev1, cms_rev2;
--- 0001/arch/i386/kernel/cpu/umc.c
+++ work/arch/i386/kernel/cpu/umc.c 2006-08-09 08:53:37.000000000 +0900
@@ -5,11 +5,6 @@
/* UMC chips appear to be only either 386 or 486, so no special init takes place.
*/
-static void __init init_umc(struct cpuinfo_x86 * c)
-{
-
-}
-
static struct cpu_dev umc_cpu_dev __initdata = {
.c_vendor = "UMC",
.c_ident = { "UMC UMC UMC" },
@@ -21,7 +16,6 @@ static struct cpu_dev umc_cpu_dev __init
}
},
},
- .c_init = init_umc,
};
int __init umc_init_cpu(void)
next prev parent reply other threads:[~2006-08-09 1:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-09 1:02 [PATCH 01/06] i386: mark cpu identify functions as __cpuinit Magnus Damm
2006-08-09 1:03 ` [PATCH 02/06] i386: remove redundant generic_identify() calls when identifying cpus Magnus Damm
2006-08-09 2:20 ` Andi Kleen
2006-08-09 1:03 ` Magnus Damm [this message]
2006-08-09 1:03 ` [PATCH 04/06] i386: mark cpu cache functions as __cpuinit Magnus Damm
2006-08-09 1:03 ` [PATCH 05/06] i386: mark cpu_dev structures as __cpuinitdata Magnus Damm
2006-08-09 1:03 ` [PATCH 06/06] x86_64: mark init_amd() as __cpuinit Magnus Damm
2006-08-09 2:17 ` Andi Kleen
2006-08-09 1:03 ` [PATCH] i386: mark tsc_init() as __init Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060809010355.25458.34804.sendpatchset@cherry.local \
--to=magnus@valinux.co.jp \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox