From: Pavel Machek <pavel@suse.cz>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: LKML <linux-kernel@vger.kernel.org>, Linux PM <linux-pm@osdl.org>
Subject: Re: [RFC][PATCH -mm 5/5] swsusp: Introduce some helpful constants
Date: Wed, 9 Aug 2006 12:36:15 +0200 [thread overview]
Message-ID: <20060809103615.GL3308@elf.ucw.cz> (raw)
In-Reply-To: <200608091213.18418.rjw@sisk.pl>
On Wed 2006-08-09 12:13:18, Rafael J. Wysocki wrote:
> Introduce some constants that hopefully will help improve the readability kernel/power/snapshot.c | 45 +++++++++++++++++++++++++--------------------
> 1 files changed, 25 insertions(+), 20 deletions(-)
>
You probably want to add signed-off-by:... aha, it is below the
patch. Some script went crazy inserting diff at wrong place. Otherwise
ACK.
Pavel
> Index: linux-2.6.18-rc3-mm2/kernel/power/snapshot.c
> ===================================================================
> --- linux-2.6.18-rc3-mm2.orig/kernel/power/snapshot.c
> +++ linux-2.6.18-rc3-mm2/kernel/power/snapshot.c
> @@ -57,6 +57,11 @@ static void *buffer;
> * so that swsusp_free() can release it.
> */
>
> +#define PG_ANY 0
> +#define PG_SAFE 1
> +#define PG_UNSAFE_CLEAR 1
> +#define PG_UNSAFE_KEEP 0
> +
> static unsigned int allocated_unsafe_pages;
>
> static void *get_image_page(gfp_t gfp_mask, int safe_needed)
> @@ -357,7 +362,7 @@ create_memory_bm(struct memory_bitmap *b
> zone_bm = create_zone_bm_list(nr, &ca);
> bm->zone_bm_list = zone_bm;
> if (!zone_bm) {
> - chain_free(&ca, 1);
> + chain_free(&ca, PG_UNSAFE_CLEAR);
> return -ENOMEM;
> }
>
> @@ -410,7 +415,7 @@ create_memory_bm(struct memory_bitmap *b
>
> Free:
> bm->p_list = ca.chain;
> - free_memory_bm(bm, 1);
> + free_memory_bm(bm, PG_UNSAFE_CLEAR);
> return -ENOMEM;
> }
>
> @@ -936,15 +941,15 @@ swsusp_alloc(struct memory_bitmap *orig_
> {
> int error;
>
> - error = create_memory_bm(orig_bm, GFP_ATOMIC, 0);
> + error = create_memory_bm(orig_bm, GFP_ATOMIC, PG_ANY);
> if (error)
> goto Free;
>
> - error = create_memory_bm(copy_bm, GFP_ATOMIC, 0);
> + error = create_memory_bm(copy_bm, GFP_ATOMIC, PG_ANY);
> if (error)
> goto Free;
>
> - error = get_highmem_buffer(0);
> + error = get_highmem_buffer(PG_ANY);
> if (error)
> goto Free;
>
> @@ -1078,7 +1083,7 @@ int snapshot_read_next(struct snapshot_h
>
> if (!buffer) {
> /* This makes the buffer be freed by swsusp_free() */
> - buffer = get_image_page(GFP_ATOMIC, 0);
> + buffer = get_image_page(GFP_ATOMIC, PG_ANY);
> if (!buffer)
> return -ENOMEM;
> }
> @@ -1299,10 +1304,10 @@ prepare_highmem_image(struct memory_bitm
> {
> unsigned int to_alloc;
>
> - if (create_memory_bm(bm, GFP_ATOMIC, 1))
> + if (create_memory_bm(bm, GFP_ATOMIC, PG_SAFE))
> return -ENOMEM;
>
> - if (get_highmem_buffer(1))
> + if (get_highmem_buffer(PG_SAFE))
> return -ENOMEM;
>
> to_alloc = count_free_highmem_pages();
> @@ -1415,8 +1420,8 @@ static inline int last_highmem_page_copi
>
> static inline void free_highmem_data(void)
> {
> - free_memory_bm(safe_highmem_bm, 1);
> - free_image_page(buffer, 1);
> + free_memory_bm(safe_highmem_bm, PG_UNSAFE_CLEAR);
> + free_image_page(buffer, PG_UNSAFE_CLEAR);
> }
> #else
> static inline int get_safe_write_buffer(void) { return 0; }
> @@ -1465,19 +1470,19 @@ prepare_image(struct memory_bitmap *new_
> int error;
>
> /* If there is no highmem, the buffer will not be necessary */
> - free_image_page(buffer, 1);
> + free_image_page(buffer, PG_UNSAFE_CLEAR);
>
> nr_highmem = count_highmem_image_pages(bm);
> error = mark_unsafe_pages(bm);
> if (error)
> goto Free;
>
> - error = create_memory_bm(new_bm, GFP_ATOMIC, 1);
> + error = create_memory_bm(new_bm, GFP_ATOMIC, PG_SAFE);
> if (error)
> goto Free;
>
> duplicate_memory_bitmap(new_bm, bm);
> - free_memory_bm(bm, 0);
> + free_memory_bm(bm, PG_UNSAFE_KEEP);
> if (nr_highmem > 0) {
> error = prepare_highmem_image(bm, &nr_highmem);
> if (error)
> @@ -1494,7 +1499,7 @@ prepare_image(struct memory_bitmap *new_
> nr_pages = nr_copy_pages - nr_highmem - allocated_unsafe_pages;
> nr_pages = DIV_ROUND_UP(nr_pages, PBES_PER_LINKED_PAGE);
> while (nr_pages > 0) {
> - lp = get_image_page(GFP_ATOMIC, 1);
> + lp = get_image_page(GFP_ATOMIC, PG_SAFE);
> if (!lp) {
> error = -ENOMEM;
> goto Free;
> @@ -1525,7 +1530,7 @@ prepare_image(struct memory_bitmap *new_
> /* Free the reserved safe pages so that chain_alloc() can use them */
> while (sp_list) {
> lp = sp_list->next;
> - free_image_page(sp_list, 1);
> + free_image_page(sp_list, PG_UNSAFE_CLEAR);
> sp_list = lp;
> }
> return 0;
> @@ -1604,7 +1609,7 @@ int snapshot_write_next(struct snapshot_
> if (handle->offset == 0) {
> if (!buffer)
> /* This makes the buffer be freed by swsusp_free() */
> - buffer = get_image_page(GFP_ATOMIC, 0);
> + buffer = get_image_page(GFP_ATOMIC, PG_ANY);
>
> if (!buffer)
> return -ENOMEM;
> @@ -1618,7 +1623,7 @@ int snapshot_write_next(struct snapshot_
> if (error)
> return error;
>
> - error = create_memory_bm(©_bm, GFP_ATOMIC, 0);
> + error = create_memory_bm(©_bm, GFP_ATOMIC, PG_ANY);
> if (error)
> return error;
>
> @@ -1668,7 +1673,7 @@ void snapshot_write_finalize(struct snap
> copy_last_highmem_page();
> /* Free only if we have loaded the image entirely */
> if (handle->prev && handle->cur > nr_meta_pages + nr_copy_pages) {
> - free_memory_bm(&orig_bm, 1);
> + free_memory_bm(&orig_bm, PG_UNSAFE_CLEAR);
> free_highmem_data();
> }
> }
> @@ -1710,7 +1715,7 @@ int restore_highmem(void)
> struct highmem_pbe *pbe = highmem_pblist;
> void *buf;
>
> - buf = get_image_page(GFP_ATOMIC, 1);
> + buf = get_image_page(GFP_ATOMIC, PG_SAFE);
> if (!buf)
> return -ENOMEM;
>
> @@ -1718,7 +1723,7 @@ int restore_highmem(void)
> swap_two_pages_data(pbe->copy_page, pbe->orig_page, buf);
> pbe = pbe->next;
> }
> - free_image_page(buf, 1);
> + free_image_page(buf, PG_UNSAFE_CLEAR);
> return 0;
> }
> #endif /* CONFIG_HIGHMEM */
>
> of the code.
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2006-08-09 10:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-09 9:52 [RFC][PATCH -mm 0/5] swsusp: Fix handling of highmem Rafael J. Wysocki
2006-08-09 9:58 ` [RFC][PATCH -mm 1/5] swsusp: Introduce memory bitmaps Rafael J. Wysocki
2006-08-09 10:31 ` Pavel Machek
2006-08-09 10:57 ` Rafael J. Wysocki
2006-08-09 11:27 ` Pavel Machek
2006-08-09 11:36 ` Rafael J. Wysocki
2006-08-09 11:53 ` Pavel Machek
2006-08-09 12:11 ` Rafael J. Wysocki
2006-08-09 11:46 ` Pavel Machek
2006-08-09 12:02 ` Rafael J. Wysocki
2006-08-09 13:35 ` Pavel Machek
2006-08-09 10:04 ` [RFC][PATCH -mm 2/5] swsusp: Use memory bitmaps during resume Rafael J. Wysocki
2006-08-09 10:34 ` Pavel Machek
2006-08-09 11:04 ` Rafael J. Wysocki
2006-08-09 11:33 ` Pavel Machek
2006-08-09 11:51 ` Rafael J. Wysocki
2006-08-09 13:33 ` Pavel Machek
2006-08-09 11:49 ` Pavel Machek
2006-08-09 12:04 ` Rafael J. Wysocki
2006-08-09 12:10 ` Pavel Machek
2006-08-09 10:09 ` [RFC][PATCH -mm 3/5] swsusp: Fix handling of highmem Rafael J. Wysocki
2006-08-09 11:51 ` Pavel Machek
2006-08-09 12:07 ` Rafael J. Wysocki
2006-08-09 13:35 ` Pavel Machek
2006-08-09 10:11 ` [RFC][PATCH -mm 4/5] swsusp: Change the name of pagedir_nosave Rafael J. Wysocki
2006-08-09 10:35 ` Pavel Machek
2006-08-09 10:13 ` [RFC][PATCH -mm 5/5] swsusp: Introduce some helpful constants Rafael J. Wysocki
2006-08-09 10:36 ` Pavel Machek [this message]
2006-08-09 10:47 ` [RFC][PATCH -mm 0/5] swsusp: Fix handling of highmem Nigel Cunningham
2006-08-09 11:38 ` Pavel Machek
2006-08-09 11:52 ` Nigel Cunningham
2006-08-13 22:34 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060809103615.GL3308@elf.ucw.cz \
--to=pavel@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@osdl.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox