From: Andrew Morton <akpm@osdl.org>
To: Andi Kleen <ak@suse.de>
Cc: linux-kernel@vger.kernel.org, Jan Beulich <jbeulich@novell.com>
Subject: Re: [PATCH for review] [43/145] i386: Redo semaphore and rwlock assembly helpers
Date: Sat, 12 Aug 2006 23:54:07 -0700 [thread overview]
Message-ID: <20060812235407.87f298d7.akpm@osdl.org> (raw)
In-Reply-To: <200608130850.01592.ak@suse.de>
On Sun, 13 Aug 2006 08:50:01 +0200
Andi Kleen <ak@suse.de> wrote:
> On Sunday 13 August 2006 02:53, Andrew Morton wrote:
> > On Thu, 10 Aug 2006 21:35:57 +0200 (CEST)
> > Andi Kleen <ak@suse.de> wrote:
> >
> > > - Move them to a pure assembly file. Previously they were in
> > > a C file that only consisted of inline assembly. Doing it in pure
> > > assembler is much nicer.
> > > - Add a frame.i include with FRAME/ENDFRAME macros to easily
> > > add frame pointers to assembly functions
> > > - Add dwarf2 annotation to them so that the new dwarf2 unwinder
> > > doesn't get stuck on them
> > > [TBD: needs review from someone who knows more about CFA than me, e.g. Jan]
> > > - Random cleanups
> >
> > This patch causes the below crash after some seconds of disk stresstesting.
>
> I can't reproduce this with either LTP nor OraSim.
> Also I looked over the patch and i can't see any mistakes.
>
> Can you double check please?
>
2-way pIII with the below .config crashes in seconds running LTP's
./testcases/bin/growfiles -W gf01 -b -e 1 -u -i 0 -L 20 -w -C 1 -l -I r -T 10 glseek20 glseek20.2
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_KLIBC_ERRLIST=y
CONFIG_KLIBC_ZLIB=y
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_READAHEAD_ALLOW_OVERHEADS is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
CONFIG_IRQBALANCE=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_SECCOMP_DISABLE_TSC is not set
# CONFIG_VGA_NOPROBE is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_DOMAIN_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_EFFECTS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_BRIQ_PANEL is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=y
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82860=y
# CONFIG_EDAC_K8 is not set
CONFIG_EDAC_R82600=y
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
#
# Instrumentation Support
#
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_VM=y
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_RODATA=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
next prev parent reply other threads:[~2006-08-13 6:54 UTC|newest]
Thread overview: 195+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060810 935.775038000@suse.de>
2006-08-10 19:35 ` [PATCH for review] [1/145] x86_64: Update defconfig Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [2/145] i386: " Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [3/145] i386: Allow to use GENERICARCH for UP kernels Andi Kleen
2006-08-10 19:47 ` Dave Hansen
2006-08-10 19:50 ` Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [4/145] x86_64: Temporarily revert parts of the Core 2 nmi nmi watchdog support Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [5/145] x86_64: Add performance counter reservation framework for UP kernels Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [6/145] x86_64: Utilize performance counter reservation framework in oprofile Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [7/145] x86_64: Add SMP support on x86_64 to reservation framework Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [8/145] x86_64: Add SMP support on i386 " Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [9/145] x86_64: Cleanup NMI interrupt path Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [10/145] x86_64: Add TIF_RESTORE_SIGMASK Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [11/145] x86_64: Add ppoll/pselect syscalls Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [12/145] i386/x86-64: Remove un/set_nmi_callback and reserve/release_lapic_nmi functions Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [13/145] x86_64: Add abilty to enable/disable nmi watchdog with sysctl Andi Kleen
2006-08-10 19:48 ` Oleg Verych
2006-08-11 6:44 ` Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [14/145] x86_64: Add abilty to enable/disable nmi watchdog from procfs (update) Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [15/145] x86_64: Allow users to force a panic on NMI Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [16/145] x86_64: x86 clean up nmi panic messages Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [17/145] i386/x86-64: x86 nmi fix Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [18/145] x86_64: x86 nmi fix 2 Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [19/145] x86_64: Fix up panic messages for different NMI panics Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [20/145] x86_64: make functions static Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [21/145] x86_64: kdump x86_64 nmi event notification fix Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [22/145] x86_64: Kdump i386 " Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [23/145] i386: Enable NMI watchdog by default Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [24/145] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [25/145] x86_64: Add macros for rdtscp Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [26/145] x86_64: Add initalization of the RDTSCP auxilliary values Andi Kleen
2006-08-10 21:49 ` Oleg Verych
2006-08-11 4:09 ` Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [27/145] x86_64: Add the vgetcpu vsyscall Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [28/145] x86_64: Add portable getcpu call Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [29/145] x86_64: Clean up asm/smp.h includes Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [30/145] x86_64: x86-64 TIF flags for debug regs and io bitmap in ctxsw Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [31/145] x86_64: Don't print virtual address in HPET initialization Andi Kleen
2006-08-11 16:50 ` Clemens Ladisch
2006-08-10 19:35 ` [PATCH for review] [32/145] x86_64: A few trivial spelling and grammar fixes Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [33/145] i386/x86-64: Don't randomize stack top when no randomization personality is set Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [34/145] i386: Account spinlocks to the caller during profiling for !FP kernels Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [35/145] x86_64: Simplify profile_pc on x86-64 Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [36/145] x86_64: Document backtracer selection options Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [37/145] x86_64: Support patchable lock prefix for pure assembly files Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [38/145] x86_64: Switch rwlocks over to patchable lock prefix Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [39/145] x86_64: Clean up read write lock assembly Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [40/145] i386: Remove const case for rwlocks Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [41/145] x86_64: Add proper alignment to ENTRY Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [42/145] i386: add alternative-asm.h to allow LOCK_PREFIX replacement in .S files Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [43/145] i386: Redo semaphore and rwlock assembly helpers Andi Kleen
2006-08-13 0:53 ` Andrew Morton
2006-08-13 6:50 ` Andi Kleen
2006-08-13 6:54 ` Andrew Morton [this message]
2006-08-13 7:42 ` Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [44/145] x86_64: Remove leftover CVS Id in thunk.S Andi Kleen
2006-08-10 19:35 ` [PATCH for review] [45/145] x86_64: Add some comments what tce.c actually does Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [46/145] x86_64: Remove all ifdefs for local/io apic Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [47/145] x86_64: Remove apic mismatch counter Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [48/145] x86_64: Remove old "focus disabled" chipset errata workaround Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [49/145] x86_64: Clean up and minor fixes to TLB flush Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [50/145] i386: Minor fixes & cleanup to tlb flush Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [51/145] x86_64: Add some comments to entry.S Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [52/145] x86_64: Remove pirq overwrite support Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [53/145] x86_64: Remove leftover MCE/EISA support Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [54/145] x86_64: Remove obsolete PIC mode Andi Kleen
2006-08-16 16:31 ` Len Brown
2006-08-16 16:35 ` Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [55/145] i386/x86-64: Remove obsolete sanity check in mptable parsing Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [56/145] x86_64: Factor out common io apic routing entry access Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [57/145] i386: " Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [58/145] x86_64: AUX_DEVICE_INFO is one byte long, use 'movb' Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [59/145] x86_64: Remove MPS table APIC renumbering Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [60/145] x86_64: Move early chipset quirks out to new file Andi Kleen
2006-08-16 15:36 ` Len Brown
2006-08-10 19:36 ` [PATCH for review] [61/145] x86_64: Replace mp bus array with bitmap for bus not pci Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [62/145] x86_64: Remove useless wrapper in mpparse.c code Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [63/145] x86_64: Remove some unneeded ACPI externs in mpparse.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [64/145] x86_64: Fix up some non linuxy style in ACPI functions " Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [65/145] i386: Clean up code style in mpparse.c ACPI code Andi Kleen
2006-08-16 16:08 ` Len Brown
2006-08-16 16:30 ` Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [66/145] x86_64: Use BUILD_BUG_ON in apic.c build sanity checking Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [67/145] x86_64: Detect CFI support in the assembler at runtime Andi Kleen
[not found] ` <20060811053932.GA4910@mars.ravnborg.org>
2006-08-11 5:55 ` Andi Kleen
2006-08-11 15:16 ` Sam Ravnborg
2006-08-11 16:10 ` Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [68/145] x86_64: Remove obsolete CVS $ from assembler files in arch/x86_64/kernel/* Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [69/145] x86_64: Disable DAC on VIA PCI bridges Andi Kleen
[not found] ` <20060810205554.GE4745@rhun.haifa.ibm.com>
2006-08-11 6:51 ` Andi Kleen
2006-08-11 19:13 ` Muli Ben-Yehuda
2006-08-11 19:36 ` Andi Kleen
2006-08-11 19:41 ` Muli Ben-Yehuda
2006-08-10 19:36 ` [PATCH for review] [70/145] x86_64: initialize end of memory variables as early as possible Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [71/145] x86_64: remove int_delivery_dest Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [72/145] i386: initialize end-of-memory variables as early as possible Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [73/145] x86_64: Add stack documentation document from Keith Owens Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [74/145] x86_64: Calgary IOMMU: rearrange 'struct iommu_table' members Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [75/145] x86_64: Calgary IOMMU: consolidate per bus data structures Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [76/145] x86_64: Calgary IOMMU: break out of pci_find_device_reverse if dev not found Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [77/145] x86_64: Calgary IOMMU: fix error path memleak in calgary_free_tar Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [78/145] x86_64: Calgary IOMMU: fix reference counting of Calgary PCI devices Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [79/145] x86_64: Calgary IOMMU: calgary_init_one_nontraslated() can return void Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [80/145] x86_64: Calgary IOMMU: save a bit of space in bus_info Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [81/145] i386: Remove lock section support in mutex.h, semaphore.h Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [82/145] x86_64: Don't use lock section for mutexes and semaphores Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [83/145] x86_64: fix is_at_popf() for compat tasks Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [84/145] x86_64: annotate arch/x86_64/lib/*.S Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [85/145] x86_64: Fix gdt table size in trampoline.S Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [86/145] x86_64: remove superflous BUG_ON's in nommu and gart Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [87/145] x86_64: remove lock prefix from is_at_popf() tests Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [88/145] x86_64: Use early CPU identify before early command line parsing Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [89/145] x86_64: Allow early_param and identical __setup to exist Andi Kleen
2006-08-16 16:25 ` Len Brown
2006-08-10 19:36 ` [PATCH for review] [90/145] x86_64: Replace i386 open-coded cmdline parsing with Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [91/145] x86_64: Convert x86-64 to early param Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [92/145] x86_64: Remove need for early lockdep init Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [93/145] i386/x86-64: Move acpi_disabled variables into acpi/boot.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [94/145] x86_64: Clean up acpi_numa variable Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [95/145] x86_64: Move e820 map into e820.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [96/145] x86_64: Add sparse annotation to vsyscall.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [97/145] x86_64: Add sparse annotations to quiet sparse in arch/x86_64/mm/fault.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [98/145] x86_64: Fix most sparse warnings in sys_ia32.c Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [99/145] x86_64: Fix sparse warnings in compat aout code Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [100/145] x86_64: Fix broken indentation in iommu_setup Andi Kleen
2006-08-10 19:36 ` [PATCH for review] [101/145] x86_64: Replace local_save_flags+local_irq_disable with Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [102/145] x86_64: Remove unneeded externs in acpi/boot.c Andi Kleen
2006-08-16 15:41 ` Len Brown
2006-08-10 19:37 ` [PATCH for review] [103/145] i386/x86-64: rename is_at_popf(), add iret to tests and fix Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [104/145] x86_64: print whether CONFIG_IOMMU_DEBUG is enabled Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [105/145] x86_64: only verify the allocation bitmap if CONFIG_IOMMU_DEBUG is on Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [106/145] x86_64: remove tce_cache_blast_stress() Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [107/145] x86_64: Calgary IOMMU: eradicate sole remaining 80 chars per line offender Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [108/145] x86_64: Some preparationary cleanup for stack trace Andi Kleen
2006-08-13 6:26 ` Andrew Morton
2006-08-13 6:53 ` Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [109/145] x86_64: Convert modlist_lock to be a raw spinlock Andi Kleen
2006-08-13 5:48 ` Andrew Morton
2006-08-13 6:52 ` Andi Kleen
2006-08-13 7:02 ` Andrew Morton
2006-08-13 7:15 ` Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [110/145] x86_64: Don't access the APIC in safe_smp_processor_id when it is not mapped yet Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [111/145] x86_64: Move unwind_init earlier Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [112/145] x86_64: Merge stacktrace and show_trace Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [113/145] i386: Do stacktracer conversion too Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [114/145] x86_64: Don't force frame pointers for lockdep Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [115/145] x86_64: fix dubious segment register clear in cpu_init() Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [116/145] i386: don't taint UP K7's running SMP kernels Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [117/145] i386: error_code is not safe for kprobes Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [118/145] x86_64: Mark error_entry as forbidden to kprobes Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [119/145] x86_64: X86_64 monotonic_clock goes backwards Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [120/145] i386/x86-64: Improve Kconfig description of CRASH_DUMP Andi Kleen
2006-08-10 21:12 ` Randy.Dunlap
2006-08-10 19:37 ` [PATCH for review] [121/145] x86_64: Make boot_param_data pure BSS Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [122/145] i386: Fix warning in mpparse.c Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [123/145] i386: make fault notifier unconditional and export it Andi Kleen
2006-08-13 15:28 ` Adrian Bunk
2006-08-13 17:11 ` Alan Cox
2006-08-13 17:08 ` Adrian Bunk
2006-08-13 18:04 ` Alan Cox
2006-08-13 20:17 ` Andi Kleen
2006-08-14 0:03 ` Keith Owens
2006-08-10 19:37 ` [PATCH for review] [124/145] " Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [125/145] i376: Make acpi_force static Andi Kleen
2006-08-16 15:47 ` Len Brown
2006-08-16 16:07 ` Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [126/145] i386: Make enable_local_apic static Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [127/145] i386: move kernel_thread_helper into entry.S Andi Kleen
2006-08-11 8:33 ` Jan Beulich
2006-08-11 8:38 ` Andi Kleen
2006-08-11 9:48 ` Jan Beulich
2006-08-11 10:16 ` Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [128/145] i386: Descriptor and trap table cleanups Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [129/145] x86_64: Auto size the per cpu area Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [130/145] i386: clean up topology.c Andi Kleen
2006-08-10 19:50 ` Dave Hansen
2006-08-10 19:55 ` Andi Kleen
2006-08-11 1:32 ` Magnus Damm
2006-08-10 19:37 ` [PATCH for review] [131/145] i386: mark two more functions as __init Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [132/145] x86_64: fix bus numbering format in mmconfig warning Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [133/145] x86_64: Support physical cpu hotplug for x86_64 Andi Kleen
[not found] ` <20060810222056.GA24184@mail.muni.cz>
2006-08-11 4:05 ` Andi Kleen
2006-08-16 16:02 ` Len Brown
2006-08-10 19:37 ` [PATCH for review] [134/145] x86_64: non lazy "sleazy" fpu implementation Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [135/145] x86_64: wire up oops_enter()/oops_exit() Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [136/145] x86_64: x86_64 kernel mapping fix Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [137/145] i386: KPROBE_ENTRY ends up putting code into .fixup Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [138/145] i386: remove redundant generic_identify() calls when identifying cpus Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [139/145] x86_64: mark init_amd() as __cpuinit Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [140/145] i386: mark cpu_dev structures as __cpuinitdata Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [141/145] i386: mark cpu init functions as __cpuinit, data " Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [142/145] i386: mark cpu identify functions as __cpuinit Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [143/145] i386: mark cpu cache " Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [144/145] i386: Disallow kprobes on NMI handlers Andi Kleen
2006-08-10 19:37 ` [PATCH for review] [145/145] " Andi Kleen
[not found] ` <20060810193518.394E413B90__40006.6926530146$1155241071$gmane$org@wotan.suse.de>
2006-08-10 22:42 ` [PATCH for review] [6/145] x86_64: Utilize performance counter reservation framework in oprofile Oleg Verych
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060812235407.87f298d7.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=ak@suse.de \
--cc=jbeulich@novell.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox