From: Eric Schoeller <eric@junker.org>
To: linux-kernel@vger.kernel.org
Subject: sata_sil driver dev 0 failed to IDENTIFY (INIT_DEV_PARAMS failed)
Date: Mon, 14 Aug 2006 03:41:38 -0400 (EDT) [thread overview]
Message-ID: <20060814034028.C66081@junker.org> (raw)
howdy,
i am using the sata_sil driver with a Silicon Image, Inc. SiI 3112
Controller and have recently started receiving these messages on driver
load:
[17179867.424000] libata version 1.20 loaded.
[17179958.936000] sata_sil 0000:02:0b.0: version 0.9
[17179958.936000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] ->
GSI 3 (level, low) -> IRQ 3
[17179958.936000] ata1: SATA max UDMA/100 cmd 0xD0838080 ctl 0xD083808A
bmdma 0xD0838000 irq 3
[17179958.936000] ata2: SATA max UDMA/100 cmd 0xD08380C0 ctl 0xD08380CA
bmdma 0xD0838008 irq 3
[17179966.296000] ata1 is slow to respond, please be patient
[17179975.928000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179975.928000] ata1: dev 0 failed to IDENTIFY (INIT_DEV_PARAMS failed)
[17179975.928000] scsi0 : sata_sil
[17179976.132000] ata2: SATA link down (SStatus 0)
As a result, the maxtor 250gb drive fails to be detected :(
I'm roughly 1900 miles away from this box so I have no ability to
physically inspect the device. I'm worried that the drive is blown (sure
wish smartmontools was compatible with libata so I might have seen this
coming sooner!) but after checking the usual sources I'm still not
entirely sure what this error message means exactly.
Any insights are greatly appreciated!
Eric Schoeller
Linux 2.6.17.8 #1 SMP Sun Aug 13 17:49:13 MDT 2006 i686 Intel(R)
Pentium(R) 4 CPU 1400MHz GNU/Linux
next reply other threads:[~2006-08-14 7:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-14 7:41 Eric Schoeller [this message]
2006-08-14 8:29 ` sata_sil driver dev 0 failed to IDENTIFY (INIT_DEV_PARAMS failed) Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060814034028.C66081@junker.org \
--to=eric@junker.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox