From: Oleg Nesterov <oleg@tv-sign.ru>
To: Andrew Morton <akpm@osdl.org>, Alan Cox <alan@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Jean Delvare <jdelvare@suse.de>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH -mm 2/3] proc: convert do_task_stat() to use lock_task_sighand()
Date: Sun, 10 Sep 2006 02:19:34 +0400 [thread overview]
Message-ID: <20060909221934.GA149@oleg> (raw)
On top of tty-stop-the-tty-vanishing-under-procfs-access.patch
Drop tasklist_lock. ->siglock protects almost all interesting data
(including sub-threads traversal) except:
->signal->tty
protected by tty_mutex
->real_parent
the task can't be unhashed while we are holding
->siglock, so ->real_parent can change from under us
but we can safely dereference it under rcu_read_lock()
->pgrp/->session
we can get inconsistent numbers if the task does
sys_setsid/daemonize at the same time. I hope this
is acceptable.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
--- rc6-mm1/fs/proc/array.c~2_stat 2006-09-09 17:47:22.000000000 +0400
+++ rc6-mm1/fs/proc/array.c 2006-09-09 20:36:46.000000000 +0400
@@ -321,7 +321,7 @@ static int do_task_stat(struct task_stru
sigset_t sigign, sigcatch;
char state;
int res;
- pid_t ppid, pgid = -1, sid = -1;
+ pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
struct mm_struct *mm;
unsigned long long start_time;
@@ -329,8 +329,8 @@ static int do_task_stat(struct task_stru
unsigned long min_flt = 0, maj_flt = 0;
cputime_t cutime, cstime, utime, stime;
unsigned long rsslim = 0;
- struct task_struct *t;
char tcomm[sizeof(task->comm)];
+ unsigned long flags;
state = *get_task_state(task);
vsize = eip = esp = 0;
@@ -348,47 +348,54 @@ static int do_task_stat(struct task_stru
cutime = cstime = utime = stime = cputime_zero;
mutex_lock(&tty_mutex);
- read_lock(&tasklist_lock);
- if (task->sighand) {
- spin_lock_irq(&task->sighand->siglock);
- num_threads = atomic_read(&task->signal->count);
- collect_sigign_sigcatch(task, &sigign, &sigcatch);
-
- /* add up live thread stats at the group level */
- if (whole) {
- t = task;
- do {
- min_flt += t->min_flt;
- maj_flt += t->maj_flt;
- utime = cputime_add(utime, t->utime);
- stime = cputime_add(stime, t->stime);
- t = next_thread(t);
- } while (t != task);
- }
-
- spin_unlock_irq(&task->sighand->siglock);
- }
- if (task->signal) {
- if (task->signal->tty) {
- tty_pgrp = task->signal->tty->pgrp;
- tty_nr = new_encode_dev(tty_devnum(task->signal->tty));
- }
- pgid = process_group(task);
- sid = task->signal->session;
- cmin_flt = task->signal->cmin_flt;
- cmaj_flt = task->signal->cmaj_flt;
- cutime = task->signal->cutime;
- cstime = task->signal->cstime;
- rsslim = task->signal->rlim[RLIMIT_RSS].rlim_cur;
- if (whole) {
- min_flt += task->signal->min_flt;
- maj_flt += task->signal->maj_flt;
- utime = cputime_add(utime, task->signal->utime);
- stime = cputime_add(stime, task->signal->stime);
- }
- }
- ppid = pid_alive(task) ? task->group_leader->real_parent->tgid : 0;
- read_unlock(&tasklist_lock);
+ rcu_read_lock();
+ if (lock_task_sighand(task, &flags)) {
+ struct signal_struct *sig = task->signal;
+ struct tty_struct *tty = sig->tty;
+
+ if (tty) {
+ /*
+ * sig->tty is not stable, but tty_mutex
+ * protects us from release_dev(tty)
+ */
+ barrier();
+ tty_pgrp = tty->pgrp;
+ tty_nr = new_encode_dev(tty_devnum(tty));
+ }
+
+ num_threads = atomic_read(&sig->count);
+ collect_sigign_sigcatch(task, &sigign, &sigcatch);
+
+ cmin_flt = sig->cmin_flt;
+ cmaj_flt = sig->cmaj_flt;
+ cutime = sig->cutime;
+ cstime = sig->cstime;
+ rsslim = sig->rlim[RLIMIT_RSS].rlim_cur;
+
+ /* add up live thread stats at the group level */
+ if (whole) {
+ struct task_struct *t = task;
+ do {
+ min_flt += t->min_flt;
+ maj_flt += t->maj_flt;
+ utime = cputime_add(utime, t->utime);
+ stime = cputime_add(stime, t->stime);
+ t = next_thread(t);
+ } while (t != task);
+
+ min_flt += sig->min_flt;
+ maj_flt += sig->maj_flt;
+ utime = cputime_add(utime, sig->utime);
+ stime = cputime_add(stime, sig->stime);
+ }
+
+ sid = sig->session;
+ pgid = process_group(task);
+ ppid = rcu_dereference(task->real_parent)->tgid;
+
+ unlock_task_sighand(task, &flags);
+ }
+ rcu_read_unlock();
mutex_unlock(&tty_mutex);
if (!whole || num_threads<2)
reply other threads:[~2006-09-09 22:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060909221934.GA149@oleg \
--to=oleg@tv-sign.ru \
--cc=akpm@osdl.org \
--cc=alan@redhat.com \
--cc=ebiederm@xmission.com \
--cc=jdelvare@suse.de \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox