From: Christian Leber <christian@leber.de>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: Re: [BUG] 2.6.18-rc6: hda is allready "IN USE" when booting / pi futex
Date: Wed, 13 Sep 2006 03:24:47 +0200 [thread overview]
Message-ID: <20060913012447.GA29749@core> (raw)
In-Reply-To: <20060912215510.GA14878@elte.hu>
On Tue, Sep 12, 2006 at 11:55:10PM +0200, Ingo Molnar wrote:
> ok, great. Could you try the patch below ontop of 2.6.18-rc6, does it
> 'fix' your bootup too?
Yes, it does.
> so i'm afraid you managed to trigger a race in the IDE driver that used
> to be dormant until now... To debug such races the best method is to
> create a 'trace' by printk-ing key points of the port/disk detection
> mechanism. [another option would be to use the latency tracer to do a
> _really_ finegrained trace of the incident - assuming that the bug does
> not go away due to tracing overhead.]
I'm looking into it, but i doubt i can find the "race"
The output, when it works it looks like this:
[ 11.275757] ICH2M: IDE controller at PCI slot 0000:00:1f.1
[ 11.275854] ICH2M: chipset revision 3
[ 11.275917] ICH2M: not 100% native mode: will probe irqs later
[ 11.275999] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
[ 11.276170] ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
[ 11.276337] Probing IDE interface ide0...
[ 2.804000] Time: acpi_pm clocksource has been installed.
[ 3.056000] hda: IC25N020ATMR04-0, ATA DISK drive
[ 3.504000] hdb: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
[ 3.560000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.560000] Probing IDE interface ide1...
[ 4.136000] hda: max request size: 512KiB
[ 4.156000] hda: 39070080 sectors (20003 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[ 4.156000] hda: cache flushes supported
[ 4.156000] hda: hda1 hda2 hda3
[ 4.216000] hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
[ 4.216000] Uniform CD-ROM driver Revision: 3.20
[ 4.816000] usbcore: registered new driver usbfs
[ 4.820000] usbcore: registered new driver hub
[ 4.820000] USB Universal Host Controller Interface driver v3.0
When it fails the order is different:
(but not allways the same, of course)
hda: IC25N020ATMR04-0, ATA DISK drive <- the disk is found before the controller?!?
ICH2M: IDE controller at PCI slot 0000:00:1f.1
ICH2M: chipset revision 3
ICH2M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
ide0: I/O resource 0x3F6-0x3F6 not free
hda: ERROR, PORTS ALREADY IN USE
ide0 ad 0x1f0-0x1f7,0x3f6 on irq 14
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
hdb: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
ide1: I/O resource 0x376-0x376 not free
ide1: ports already in use, skipping probe
register_blkdev: cannot get major 3 for ide0
Christian Leber
--
"Omnis enim res, quae dando non deficit, dum habetur et non datur,
nondum habetur, quomodo habenda est." (Aurelius Augustinus)
prev parent reply other threads:[~2006-09-13 1:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-07 13:33 [BUG] 2.6.18-rc6: hda is allready "IN USE" when booting (non-deterministic) Christian Leber
2006-09-12 15:39 ` [BUG] 2.6.18-rc6: hda is allready "IN USE" when booting / pi futex Christian Leber
2006-09-12 17:34 ` Ingo Molnar
2006-09-12 21:48 ` Christian Leber
2006-09-12 21:55 ` Ingo Molnar
2006-09-13 1:24 ` Christian Leber [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060913012447.GA29749@core \
--to=christian@leber.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox