From: Diego Calleja <diegocg@gmail.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: jeff@garzik.org, linux-kernel@vger.kernel.org
Subject: Re: pata_serverworks oopses in latest -git
Date: Wed, 27 Sep 2006 00:21:49 +0200 [thread overview]
Message-ID: <20060927002149.06c934e8.diegocg@gmail.com> (raw)
In-Reply-To: <1159305871.11049.316.camel@localhost.localdomain>
El Tue, 26 Sep 2006 22:24:31 +0100,
Alan Cox <alan@lxorguk.ukuu.org.uk> escribió:
> Doh.. OSB4IDE not OSB4
That made things work! I can confirm I can read CDs, but I wasn't
able to read DVDs, though.
[ 13.023296] ata3: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
[ 13.023356] ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
[ 13.023407] scsi2 : pata_serverworks
[ 13.213080] FDC 0 is a National Semiconductor PC87306
[ 13.329056] ata3.00: ATAPI, max UDMA/33
[ 13.484999] ata3.00: configured for UDMA/33
[ 13.485030] scsi3 : pata_serverworks
[ 13.647669] ATA: abnormal status 0x8 on port 0x177
[ 13.658291] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 13.693611] usbcore: registered new driver hiddev
[ 13.699398] input: Forward USB Optical Mouse as /class/input/input2
[ 13.699479] input: USB HID v1.10 Mouse [Forward USB Optical Mouse] on usb-0000:00:0f.2-2
[ 13.705461] input: PS/2+USB Mouse as /class/input/input3
[ 13.705556] input: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:0f.2-1
[ 13.705581] usbcore: registered new driver usbhid
[ 13.705588] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 13.824876] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 24 (level, low) -> IRQ 18
[ 13.824928] Model 1006 Rev 00000000 Serial 10061102
[ 14.066099] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 14.066113] Uniform CD-ROM driver Revision: 3.20
[ 14.066260] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 14.090382] ts: Compaq touchscreen protocol output
[ 15.228271] NET: Registered protocol family 17
[ 20.190245] ACPI: Power Button (FF) [PWRF]
[ 20.190271] ACPI: Sleep Button (CM) [SLPB]
[ 20.218224] Using specific hotkey driver
[ 23.655420] [drm] Initialized drm 1.0.1 20051102
[ 23.666922] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 30 (level, low) -> IRQ 19
[ 23.668312] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 24.847392] agpgart: Putting AGP V2 device at 0000:00:00.1 into 1x mode
[ 24.847652] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 25.158828] [drm] Setting GART location based on new memory map
[ 25.159052] [drm] Loading R200 Microcode
[ 25.159263] [drm] writeback test succeeded in 1 usecs
[ 35.966143] NET: Registered protocol family 10
[ 35.966719] lo: Disabled Privacy Extensions
[ 35.967014] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.967276] IPv6 over IPv4 tunneling driver
[ 39.931359] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'AMELI_SCN', timestamp 2002/04/05 17:04 (1078)
[ 54.829894] PPP generic driver version 2.4.2
[ 86.083878] PPP BSD Compression module registered
[ 86.134263] PPP Deflate Compression module registered
[ 98.782085] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'AMELI_SCN', timestamp 2002/04/05 17:04 (1078)
[ 129.270661] sr 2:0:0:0: SCSI error: return code = 0x08000002
[ 129.270675] sr0: Current: sense key=0x3
[ 129.270680] ASC=0x10 <<vendor>> ASCQ=0x90
[ 129.270689] end_request: I/O error, dev sr0, sector 86372
[ 129.270698] Buffer I/O error on device sr0, logical block 21593
[ 129.270713] Buffer I/O error on device sr0, logical block 21594
[ 129.270724] Buffer I/O error on device sr0, logical block 21595
[ 129.270731] Buffer I/O error on device sr0, logical block 21596
[ 129.270738] Buffer I/O error on device sr0, logical block 21597
[ 129.270745] Buffer I/O error on device sr0, logical block 21598
[ 129.270751] Buffer I/O error on device sr0, logical block 21599
[ 129.270758] Buffer I/O error on device sr0, logical block 21600
[ 129.270765] Buffer I/O error on device sr0, logical block 21601
[ 129.270772] Buffer I/O error on device sr0, logical block 21602
[ 157.089352] sr 2:0:0:0: SCSI error: return code = 0x08000002
[ 157.089365] sr0: Current: sense key=0x3
[ 157.089374] ASC=0x10 <<vendor>> ASCQ=0x90
[ 157.089385] end_request: I/O error, dev sr0, sector 422912
[ 157.089392] printk: 53 messages suppressed.
next prev parent reply other threads:[~2006-09-26 22:22 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-26 12:00 pata_serverworks oopses in latest -git Diego Calleja
2006-09-26 12:50 ` Alan Cox
2006-09-26 15:56 ` Jeff Garzik
2006-09-26 19:29 ` Diego Calleja
2006-09-26 19:43 ` Jeff Garzik
2006-09-26 20:02 ` Alan Cox
2006-09-26 20:38 ` Diego Calleja
2006-09-26 21:24 ` Alan Cox
2006-09-26 21:25 ` Jeff Garzik
2006-09-26 22:21 ` Diego Calleja [this message]
2006-09-26 23:06 ` Alan Cox
2006-09-26 22:58 ` Diego Calleja
2006-09-26 23:27 ` Diego Calleja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060927002149.06c934e8.diegocg@gmail.com \
--to=diegocg@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox