Java Zombies

Martin Lorenz
2006-10-04T12:05:29Z

[-- Attachment #1: Type: text/plain, Size: 1035 bytes --]

Another strange behaviour...

I just got back into my java code and experienced really strange things:

I run a java app for a while, stop it, start it, do things with it
(development tasks...) and suddenly java becomes defunct.

all running java processes are zombies and no trick will kill them. java gui
stays onscreen but doesen't refresh.

and, even more strange: while CPUs stay at about 2 to 8% activity load
increases. it's at 7 now after around 2 minutes

I attach some info about my system (X60s 1702-55G)

oops: cat /proc/cpuinfo hangs!!

...after that I could not even shutdown cleanly.
I had to use SysRq keys to halt the system

gruss
mlo
--
Dipl.-Ing. Martin Lorenz

They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin

please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D

ICQ UIN: 33588107

[-- Attachment #2: system --]
[-- Type: text/plain, Size: 92413 bytes --]

Linux gimli 2.6.18tpsmapi+ieee80211+libata+ibmtherm+ibmfan #1 SMP Mon Oct 2 00:00:47 CEST 2006 i686 GNU/Linux

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18tpsmapi+ieee80211+libata+ibmtherm+ibmfan
# Sun Oct 1 23:53:21 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_THINKPAD_EC=y
CONFIG_TP_SMAPI=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda13"
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_NETLABEL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_IDEDMA_PCI is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
# CONFIG_IPW2200_QOS is not set
# CONFIG_IPW2200_DEBUG is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_I810=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
# CONFIG_DVB_CORE_ATTACH is not set

#
# Supported SAA7146 based PCI Adapters
#

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set

#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUNER_MT2060 is not set

#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not set
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TEST=m

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82860=y
CONFIG_EDAC_R82600=y
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_FS=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

7.747756] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000
[ 7.747761] Intel machine check architecture supported.
[ 7.747766] Intel machine check reporting enabled on CPU#1.
[ 7.747814] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08
[ 7.748895] Total of 2 processors activated (6652.96 BogoMIPS).
[ 7.749178] ENABLING IO-APIC IRQs
[ 7.749454] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.861214] checking TSC synchronization across 2 CPUs:
[ 0.000080] CPU#0 had -172 usecs TSC skew, fixed it up.
[ 0.000168] CPU#1 had 172 usecs TSC skew, fixed it up.
[ 0.000952] Brought up 2 CPUs
[ 0.061691] migration_cost=34
[ 0.062294] NET: Registered protocol family 16
[ 0.062454] ACPI: bus type pci registered
[ 0.062548] PCI: Using MMCONFIG
[ 0.063384] Setting up standard PCI resources
[ 0.066218] ACPI: Found ECDT
[ 0.075663] ACPI: Interpreter enabled
[ 0.075748] ACPI: Using IOAPIC for interrupt routing
[ 0.076704] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11)
[ 0.077864] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11)
[ 0.079013] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11)
[ 0.080170] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[ 0.081326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.082483] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.083635] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.084788] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.085705] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.085795] PCI: Probing PCI hardware (bus 00)
[ 0.089074] Boot video device is 0000:00:02.0
[ 0.089762] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 0.091086] PCI: Transparent bridge - 0000:00:1e.0
[ 0.091294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.095822] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[ 0.096310] ACPI: Power Resource [PUBS] (on)
[ 0.098015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.098207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.098397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.098625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.098871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.100526] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.100624] pnp: PnP ACPI init
[ 0.104939] pnp: PnP ACPI: found 12 devices
[ 0.105052] intel_rng: FWH not detected
[ 0.105250] SCSI subsystem initialized
[ 0.105393] PCI: Using ACPI for IRQ routing
[ 0.105482] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.106575] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.106668] PCI: Bridge: 0000:00:1c.0
[ 0.106756] IO window: 2000-2fff
[ 0.106858] MEM window: ee000000-ee0fffff
[ 0.106946] PREFETCH window: disabled.
[ 0.107035] PCI: Bridge: 0000:00:1c.1
[ 0.107121] IO window: 3000-4fff
[ 0.107209] MEM window: ec000000-edffffff
[ 0.107298] PREFETCH window: e4000000-e40fffff
[ 0.107389] PCI: Bridge: 0000:00:1c.2
[ 0.107476] IO window: 5000-6fff
[ 0.107564] MEM window: e8000000-e9ffffff
[ 0.107653] PREFETCH window: e4100000-e41fffff
[ 0.107744] PCI: Bridge: 0000:00:1c.3
[ 0.107836] IO window: 7000-8fff
[ 0.107925] MEM window: ea000000-ebffffff
[ 0.108014] PREFETCH window: e4200000-e42fffff
[ 0.108108] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[ 0.108196] IO window: 00009000-000090ff
[ 0.108286] IO window: 00009400-000094ff
[ 0.108375] PREFETCH window: e0000000-e1ffffff
[ 0.108466] MEM window: e6000000-e7ffffff
[ 0.108555] PCI: Bridge: 0000:00:1e.0
[ 0.108642] IO window: 9000-cfff
[ 0.108730] MEM window: e4300000-e7ffffff
[ 0.108825] PREFETCH window: e0000000-e3ffffff
[ 0.108934] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 169
[ 0.109106] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.109125] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 177
[ 0.109296] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.109314] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
[ 0.109486] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.109504] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 193
[ 0.109675] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.109684] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
[ 0.109781] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.109796] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 0.109968] PCI: Setting latency timer of device 0000:15:00.0 to 64
[ 0.109991] NET: Registered protocol family 2
[ 0.122791] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.122987] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.124902] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.125454] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.125546] TCP reno registered
[ 0.125821] Simple Boot Flag at 0x35 set to 0x1
[ 0.126343] audit: initializing netlink socket (disabled)
[ 0.126444] audit(1159951914.579:1): initialized
[ 0.126598] highmem bounce pool size: 64 pages
[ 0.126870] io scheduler noop registered
[ 0.126999] io scheduler anticipatory registered
[ 0.127128] io scheduler deadline registered
[ 0.127267] io scheduler cfq registered (default)
[ 0.127672] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.127719] assign_interrupt_mode Found MSI capability
[ 0.127865] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.127902] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.127939] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.128033] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.128078] assign_interrupt_mode Found MSI capability
[ 0.128994] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.129026] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.129057] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.129148] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.129193] assign_interrupt_mode Found MSI capability
[ 0.129321] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.129352] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.129386] Allocate Port Service[0000:00:1c.2:pcie03]
[ 0.129476] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.129522] assign_interrupt_mode Found MSI capability
[ 0.129649] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.129682] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.129712] Allocate Port Service[0000:00:1c.3:pcie03]
[ 0.150761] Real Time Clock Driver v1.12ac
[ 0.150894] hpet_resources: 0xfed00000 is busy
[ 0.150914] Linux agpgart interface v0.101 (c) Dave Jones
[ 0.151033] agpgart: Detected an Intel 945GM Chipset.
[ 0.152378] agpgart: Detected 7932K stolen memory.
[ 0.167719] agpgart: AGP aperture is 256M @ 0xd0000000
[ 0.167845] [drm] Initialized drm 1.0.1 20051102
[ 0.168195] loop: loaded (max 8 devices)
[ 0.168282] Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
[ 0.168372] Copyright (c) 1999-2006 Intel Corporation.
[ 0.168516] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 0.168707] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 0.215726] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:22:9b:82
[ 0.261439] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 0.261620] netconsole: not configured, aborting
[ 0.261782] libata version 2.00 loaded.
[ 0.261813] ahci 0000:00:1f.2: version 2.0
[ 0.261828] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201
[ 1.263964] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.263971] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.264105] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.264264] ata1: SATA max UDMA/133 cmd 0xF8824500 ctl 0x0 bmdma 0x0 irq 58
[ 1.264410] ata2: SATA max UDMA/133 cmd 0xF8824580 ctl 0x0 bmdma 0x0 irq 58
[ 1.264555] ata3: SATA max UDMA/133 cmd 0xF8824600 ctl 0x0 bmdma 0x0 irq 58
[ 1.264701] ata4: SATA max UDMA/133 cmd 0xF8824680 ctl 0x0 bmdma 0x0 irq 58
[ 1.264799] scsi0 : ahci
[ 1.722225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.722672] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32)
[ 1.722802] ata1.00: ata1: dev 0 multi count 16
[ 1.725218] ata1.00: configured for UDMA/100
[ 1.725314] scsi1 : ahci
[ 2.028724] ata2: SATA link down (SStatus 0 SControl 0)
[ 2.028825] scsi2 : ahci
[ 2.332242] ata3: SATA link down (SStatus 0 SControl 0)
[ 2.332337] scsi3 : ahci
[ 2.635760] ata4: SATA link down (SStatus 0 SControl 0)
[ 2.635935] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0084 PQ: 0 ANSI: 5
[ 2.636150] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 2.636248] sda: Write Protect is off
[ 2.636333] sda: Mode Sense: 00 3a 00 00
[ 2.636348] SCSI device sda: drive cache: write back
[ 2.636472] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 2.636568] sda: Write Protect is off
[ 2.636653] sda: Mode Sense: 00 3a 00 00
[ 2.636667] SCSI device sda: drive cache: write back
[ 2.636756] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[ 2.803996] sd 0:0:0:0: Attached scsi disk sda
[ 2.804210] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.813021] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.814063] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.814255] mice: PS/2 mouse device common for all mice
[ 2.814343] i2c /dev entries driver
[ 2.815726] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 193
[ 2.815969] hdaps: LENOVO ThinkPad X60 detected, inverting axes
[ 2.833694] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.833857] hdaps: initial mode latch is 0x05
[ 2.834002] hdaps: setting ec_rate=250, filter_order=2
[ 2.834039] hdaps: fake_data_mode set to 0
[ 2.834259] hdaps: device successfully initialized.
[ 2.834395] input: hdaps as /class/input/input1
[ 2.834484] hdaps: driver successfully loaded.
[ 2.834570] EDAC MC: Ver: 2.0.1 Oct 1 2006
[ 2.835061] thinkpad_ec: thinkpad_ec 0.30 loaded.
[ 2.835238] TCP bic registered
[ 2.835327] NET: Registered protocol family 1
[ 2.835417] NET: Registered protocol family 17
[ 2.835539] Starting balanced_irq
[ 2.835631] Using IPI No-Shortcut mode
[ 2.836038] ACPI: (supports S0 S3 S4 S5)
[ 2.836378] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.836576] Time: tsc clocksource has been installed.
[ 2.838926] VFS: Mounted root (ext2 filesystem) readonly.
[ 2.839112] Freeing unused kernel memory: 176k freed
[ 6.088813] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 6.088965] sdhci: Copyright(c) Pierre Ossman
[ 6.089089] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18)
[ 6.089239] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 66
[ 6.090910] PCI: Setting latency timer of device 0000:15:00.2 to 64
[ 6.092968] mmc0: SDHCI at 0xe4301800 irq 66 DMA
[ 6.159931] input: PC Speaker as /class/input/input2
[ 6.522964] ieee1394: Initialized config rom entry `ip1394'
[ 6.524735] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 74
[ 6.524922] PCI: Setting latency timer of device 0000:15:00.1 to 64
[ 6.576006] irda_init()
[ 6.576018] NET: Registered protocol family 23
[ 6.578134] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[74] MMIO=[e4301000-e43017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.600878] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 6.600969] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 6.622388] usbcore: registered new interface driver usbfs
[ 6.622507] usbcore: registered new interface driver hub
[ 6.622640] usbcore: registered new device driver usb
[ 6.646655] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c]
[ 6.655649] pnp: Device 00:0a activated.
[ 6.655745] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 7 ; dma 1.
[ 6.655768] nsc-ircc, chip->init
[ 6.655863] nsc-ircc, Found chip at base=0x164e
[ 6.655986] nsc-ircc, driver loaded (Dag Brattli)
[ 6.656132] IrDA: Registered device irda0
[ 6.656279] nsc-ircc, Found dongle: No dongle connected
[ 6.656374] nsc_ircc_init_dongle_interface(), No dongle connected
[ 6.661600] ieee80211_crypt: registered algorithm 'NULL'
[ 6.663551] ieee80211: 802.11 data/management/control stack, 1.2.15
[ 6.663645] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 6.673687] USB Universal Host Controller Interface driver v3.0
[ 6.673832] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 6.674020] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 6.674024] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.674282] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 6.674452] uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001820
[ 6.674662] usb usb1: configuration #1 chosen from 1 choice
[ 6.674781] hub 1-0:1.0: USB hub found
[ 6.674875] hub 1-0:1.0: 2 ports detected
[ 6.758172] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d
[ 6.758317] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 6.769988] Yenta: ISA IRQ mask 0x0438, PCI irq 201
[ 6.770087] Socket status: 30000006
[ 6.770175] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[ 6.770269] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[ 6.770362] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[ 6.776633] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74
[ 6.776815] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 6.776819] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.776928] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 6.777084] uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001840
[ 6.777265] usb usb2: configuration #1 chosen from 1 choice
[ 6.777373] hub 2-0:1.0: USB hub found
[ 6.777462] hub 2-0:1.0: 2 ports detected
[ 6.841084] ohci1394: fw-host0: Running dma failed because Node ID is not valid
[ 6.879123] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
[ 6.879303] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.879308] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.879423] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 6.879578] uhci_hcd 0000:00:1d.2: irq 66, io base 0x00001860
[ 6.879754] usb usb3: configuration #1 chosen from 1 choice
[ 6.879865] hub 3-0:1.0: USB hub found
[ 6.879954] hub 3-0:1.0: 2 ports detected
[ 6.981933] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 82
[ 6.982110] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 6.982114] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.982226] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 6.982381] uhci_hcd 0000:00:1d.3: irq 82, io base 0x00001880
[ 6.982553] usb usb4: configuration #1 chosen from 1 choice
[ 6.982661] hub 4-0:1.0: USB hub found
[ 6.982750] hub 4-0:1.0: 2 ports detected
[ 7.084128] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 82
[ 7.084306] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 7.084310] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.084420] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 7.084575] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.084664] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 7.084670] ehci_hcd 0000:00:1d.7: irq 82, io mem 0xee444000
[ 7.088652] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7.088853] usb usb5: configuration #1 chosen from 1 choice
[ 7.088963] hub 5-0:1.0: USB hub found
[ 7.089066] hub 5-0:1.0: 8 ports detected
[ 7.190656] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
[ 7.190912] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.191546] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.213225] input: TPPS/2 IBM TrackPoint as /class/input/input3
[ 7.585923] ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
[ 7.586116] ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
[ 7.832509] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 7.843607] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40600192017]
[ 7.861468] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
[ 7.994024] usb 4-1: configuration #1 chosen from 1 choice
[ 8.058838] Bluetooth: Core ver 2.10
[ 8.059299] NET: Registered protocol family 31
[ 8.059392] Bluetooth: HCI device and connection manager initialized
[ 8.059487] Bluetooth: HCI socket layer initialized
[ 8.082086] Bluetooth: HCI USB driver ver 2.9
[ 8.202915] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 8.235859] hda_intel: azx_get_response timeout, switching to polling mode...
[ 8.368449] usb 4-2: configuration #1 chosen from 1 choice
[ 8.373505] usbcore: registered new interface driver hci_usb
[ 9.235272] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[ 19.418359] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74
[ 19.418599] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 19.418664] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 20.600215] Adding 1951856k swap on /dev/sda12. Priority:-1 extents:1 across:1951856k
[ 20.601255] Adding 2931820k swap on /dev/sda13. Priority:-2 extents:1 across:2931820k
[ 22.591255] Non-volatile memory driver v1.2
[ 22.620215] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 22.620311] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 22.636319] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
[ 22.636411] ibm_acpi: http://ibm-acpi.sf.net/
[ 22.645308] tp_smapi 0.30 loading...
[ 22.645506] tp_smapi successfully loaded (smapi_port=0xb2).
[ 22.656265] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 22.656801] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 22.657794] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 22.658056] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 22.658813] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 22.659316] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 22.660354] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 22.660615] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 22.524000] Time: hpet clocksource has been installed.
[ 40.626000] ReiserFS: sda14: found reiserfs format "3.6" with standard journal
[ 40.626000] ReiserFS: sda14: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.626000] ReiserFS: sda14: warning: - it is slow mode for debugging.
[ 40.626000] ReiserFS: sda14: using ordered data mode
[ 40.651000] ReiserFS: sda14: journal params: device sda14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.651000] ReiserFS: sda14: checking transaction log (sda14)
[ 40.652000] ReiserFS: sda14: journal-1153: found in header: first_unflushed_offset 6367, last_flushed_trans_id 15167
[ 40.665000] ReiserFS: sda14: journal-1206: Starting replay from offset 65146063952095, trans_id 4294967290
[ 40.665000] ReiserFS: sda14: journal-1299: Setting newest_mount_id to 120
[ 40.707000] ReiserFS: sda14: Using r5 hash to sort names
[ 40.748000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[ 40.748000] ReiserFS: sda8: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.748000] ReiserFS: sda8: warning: - it is slow mode for debugging.
[ 40.748000] ReiserFS: sda8: using ordered data mode
[ 40.755000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.756000] ReiserFS: sda8: checking transaction log (sda8)
[ 40.756000] ReiserFS: sda8: journal-1153: found in header: first_unflushed_offset 1582, last_flushed_trans_id 438337
[ 40.768000] ReiserFS: sda8: journal-1206: Starting replay from offset 1882647374595630, trans_id 4294967290
[ 40.768000] ReiserFS: sda8: journal-1299: Setting newest_mount_id to 120
[ 40.784000] ReiserFS: sda8: Using r5 hash to sort names
[ 40.821000] ReiserFS: sda11: found reiserfs format "3.6" with standard journal
[ 40.822000] ReiserFS: sda11: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.822000] ReiserFS: sda11: warning: - it is slow mode for debugging.
[ 40.822000] ReiserFS: sda11: using ordered data mode
[ 40.827000] ReiserFS: sda11: journal params: device sda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.828000] ReiserFS: sda11: checking transaction log (sda11)
[ 40.828000] ReiserFS: sda11: journal-1153: found in header: first_unflushed_offset 2478, last_flushed_trans_id 6296
[ 40.843000] ReiserFS: sda11: journal-1206: Starting replay from offset 27045409065390, trans_id 4294967290
[ 40.843000] ReiserFS: sda11: journal-1299: Setting newest_mount_id to 120
[ 40.849000] ReiserFS: sda11: Using r5 hash to sort names
[ 40.866000] ReiserFS: sda10: found reiserfs format "3.6" with standard journal
[ 40.866000] ReiserFS: sda10: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.866000] ReiserFS: sda10: warning: - it is slow mode for debugging.
[ 40.866000] ReiserFS: sda10: using ordered data mode
[ 40.876000] ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.878000] ReiserFS: sda10: checking transaction log (sda10)
[ 40.878000] ReiserFS: sda10: journal-1153: found in header: first_unflushed_offset 2478, last_flushed_trans_id 6296
[ 40.887000] ReiserFS: sda10: journal-1206: Starting replay from offset 27045409065390, trans_id 4294967290
[ 40.887000] ReiserFS: sda10: journal-1299: Setting newest_mount_id to 120
[ 40.932000] ReiserFS: sda10: Using r5 hash to sort names
[ 40.949000] ReiserFS: sda9: found reiserfs format "3.6" with standard journal
[ 40.949000] ReiserFS: sda9: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.949000] ReiserFS: sda9: warning: - it is slow mode for debugging.
[ 40.949000] ReiserFS: sda9: using ordered data mode
[ 40.956000] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 40.956000] ReiserFS: sda9: checking transaction log (sda9)
[ 40.956000] ReiserFS: sda9: journal-1153: found in header: first_unflushed_offset 4686, last_flushed_trans_id 49611
[ 40.959000] ReiserFS: sda9: journal-1206: Starting replay from offset 213081917493838, trans_id 4112031768
[ 40.959000] ReiserFS: sda9: journal-1299: Setting newest_mount_id to 120
[ 40.979000] ReiserFS: sda9: Using r5 hash to sort names
[ 41.032000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 41.032000] ReiserFS: sda7: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.032000] ReiserFS: sda7: warning: - it is slow mode for debugging.
[ 41.032000] ReiserFS: sda7: using ordered data mode
[ 41.037000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.037000] ReiserFS: sda7: checking transaction log (sda7)
[ 41.038000] ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 7979, last_flushed_trans_id 471407
[ 41.045000] ReiserFS: sda7: journal-1206: Starting replay from offset 2024681943080747, trans_id 14000000
[ 41.045000] ReiserFS: sda7: journal-1299: Setting newest_mount_id to 120
[ 41.087000] ReiserFS: sda7: Using r5 hash to sort names
[ 41.148000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[ 41.149000] ReiserFS: sda6: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.149000] ReiserFS: sda6: warning: - it is slow mode for debugging.
[ 41.149000] ReiserFS: sda6: using ordered data mode
[ 41.163000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.164000] ReiserFS: sda6: checking transaction log (sda6)
[ 41.164000] ReiserFS: sda6: journal-1153: found in header: first_unflushed_offset 5453, last_flushed_trans_id 572175
[ 41.175000] ReiserFS: sda6: journal-1006: found valid transaction start offset 4294972749, len 570688 id 4096
[ 41.175000] ReiserFS: sda6: journal-1206: Starting replay from offset 2457477207561549, trans_id 16000000
[ 41.175000] ReiserFS: sda6: journal-1037: journal_read_transaction, offset 4294972749, len 119 mount_id 0
[ 41.175000] ReiserFS: sda6: journal-1039: journal_read_trans skipping because 5453 is too old
[ 41.175000] ReiserFS: sda6: journal-1299: Setting newest_mount_id to 120
[ 41.212000] ReiserFS: sda6: Using r5 hash to sort names
[ 48.985000] tun: Universal TUN/TAP device driver, 1.6
[ 48.985000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 49.305000] ACPI: AC Adapter [AC] (on-line)
[ 49.323000] ACPI: Battery Slot [BAT0] (battery present)
[ 49.333000] ACPI: Power Button (FF) [PWRF]
[ 49.333000] ACPI: Lid Switch [LID]
[ 49.333000] ACPI: Sleep Button (CM) [SLPB]
[ 49.343000] ACPI: ACPI Dock Station Driver
[ 49.375000] ACPI: Thermal Zone [THM0] (46 C)
[ 49.377000] ACPI: Thermal Zone [THM1] (48 C)
[ 49.387000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 49.387000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 55.488000] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 55.692000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
[ 60.982000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 61.095000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102)
[ 61.095000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74
[ 61.095000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 64.445000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
[ 64.445000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[ 74.869000] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 75.076000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
[ 76.518000] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 76.725000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
[ 91.152000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 91.152000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 91.463000] usb 5-6: new high speed USB device using ehci_hcd and address 4
[ 91.577000] usb 5-6: configuration #1 chosen from 1 choice
[ 91.577000] hub 5-6:1.0: USB hub found
[ 91.577000] hub 5-6:1.0: 4 ports detected
[ 91.585000] ACPI: docking
[ 91.825000] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 91.856000] usb 5-6.1: new low speed USB device using ehci_hcd and address 5
[ 91.947000] usb 5-6.1: configuration #1 chosen from 1 choice
[ 92.030000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
[ 92.126000] usb 5-6.3: new low speed USB device using ehci_hcd and address 6
[ 92.233000] usb 5-6.3: configuration #1 chosen from 1 choice
[ 93.438000] usbcore: registered new interface driver hiddev
[ 93.441000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[ 93.442000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-6.1
[ 93.449000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5
[ 93.450000] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3
[ 93.460000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input6
[ 93.460000] input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3
[ 93.460000] usbcore: registered new interface driver usbhid
[ 93.460000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 94.153000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 94.396000] smapi smapi: set_real_thresh: set start to 39 for bat=0
[ 94.600000] smapi smapi: set_real_thresh: set stop to 75 for bat=0
[ 1902.453000] usb 5-6.2: new high speed USB device using ehci_hcd and address 7
[ 1902.538000] usb 5-6.2: configuration #1 chosen from 1 choice
[ 1902.607000] Initializing USB Mass Storage driver...
[ 1902.608000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1902.608000] usb-storage: device found at 7
[ 1902.608000] usb-storage: waiting for device to settle before scanning
[ 1902.608000] usbcore: registered new interface driver usb-storage
[ 1902.608000] USB Mass Storage support registered.
[ 1907.610000] scsi 4:0:0:0: Direct-Access USB 2.0 memory 0.00 PQ: 0 ANSI: 2
[ 1907.611000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB)
[ 1907.612000] sdb: Write Protect is off
[ 1907.612000] sdb: Mode Sense: 00 00 00 00
[ 1907.612000] sdb: assuming drive cache: write through
[ 1907.614000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB)
[ 1907.614000] sdb: Write Protect is off
[ 1907.614000] sdb: Mode Sense: 00 00 00 00
[ 1907.614000] sdb: assuming drive cache: write through
[ 1907.614000] sdb: sdb1
[ 1907.802000] sd 4:0:0:0: Attached scsi removable disk sdb
[ 1907.803000] usb-storage: device scan complete
[ 2134.493000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 2341.033000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 4501.073000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 4990.213000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 5153.973000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 8151.193000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[ 9460.003000] usb 5-6.2: USB disconnect, address 7
[11697.313000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[15217.513000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
[15546.593000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80
CPU0 CPU1
0: 17136535 0 IO-APIC-edge timer
1: 24 0 IO-APIC-edge i8042
8: 158 0 IO-APIC-edge rtc
9: 87747 0 IO-APIC-level acpi
12: 150 0 IO-APIC-edge i8042
58: 22283 153260 PCI-MSI libata
66: 0 0 IO-APIC-level sdhci:slot0, uhci_hcd:usb3
74: 6 0 IO-APIC-level ohci1394, uhci_hcd:usb2, ipw3945
82: 198842 0 IO-APIC-level uhci_hcd:usb4, ehci_hcd:usb5
90: 968 0 PCI-MSI HDA Intel
98: 108197 0 PCI-MSI eth0
201: 0 0 IO-APIC-level yenta, uhci_hcd:usb1, i915@pci:0000:00:02.0
NMI: 0 0
LOC: 17136376 17136730
ERR: 0
MIS: 0

nls_cp437 6272 0 - Live 0xf930a000
vfat 12928 0 - Live 0xf9305000
fat 51100 1 vfat, Live 0xf931d000
usb_storage 78912 0 - Live 0xf9401000
usbhid 39008 0 - Live 0xf9312000
i915 19584 2 - Live 0xf8b10000
snd_hda_intel 19480 1 - Live 0xf8ab5000
snd_hda_codec 161536 1 snd_hda_intel, Live 0xf932b000
snd_pcm_oss 42400 0 - Live 0xf8afc000
snd_mixer_oss 16896 1 snd_pcm_oss, Live 0xf8aaf000
snd_pcm 78084 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8a8c000
snd_timer 22660 1 snd_pcm, Live 0xf8a65000
snd 52836 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 0xf8a6d000
soundcore 9056 1 snd, Live 0xf8a58000
snd_page_alloc 10504 2 snd_hda_intel,snd_pcm, Live 0xf8869000
binfmt_misc 11912 1 - Live 0xf92f3000
cpufreq_ondemand 8716 3 - Live 0xf92ea000
container 4992 0 - Live 0xf92db000
video 17156 0 - Live 0xf92df000
thermal 15112 0 - Live 0xf92bb000
i2c_ec 5632 0 - Live 0xf92d5000
fan 5380 0 - Live 0xf92d2000
dock 8204 0 - Live 0xf92ce000
button 7312 0 - Live 0xf92cb000
battery 10756 0 - Live 0xf92c7000
ac 5764 0 - Live 0xf92c4000
tun 11392 1 - Live 0xf92c0000
speedstep_centrino 11296 2 - Live 0xf8b76000
freq_table 6024 2 cpufreq_ondemand,speedstep_centrino, Live 0xf8b18000
processor 33208 2 thermal,speedstep_centrino, Live 0xf8b8d000
tp_smapi 24080 0 - Live 0xf8b7a000
ibm_acpi 28928 0 - Live 0xf8b51000
sbp2 23940 0 - Live 0xf8b5a000
nvram 9224 1 - Live 0xf8b1d000
hci_usb 17180 0 - Live 0xf8acf000
bluetooth 52196 1 hci_usb, Live 0xf8b63000
eth1394 19972 0 - Live 0xf8ad5000
pcmcia 37012 0 - Live 0xf8a7f000
irtty_sir 8832 0 - Live 0xf8a19000
ipw3945 188832 0 - Live 0xf8b21000
sir_dev 16772 1 irtty_sir, Live 0xf8a27000
generic 5380 0 [permanent], Live 0xf8a1d000
psmouse 38664 0 - Live 0xf89cb000
ehci_hcd 31752 0 - Live 0xf8a10000
uhci_hcd 23308 0 - Live 0xf8a09000
ieee80211 32200 1 ipw3945, Live 0xf88f4000
ieee80211_crypt 6528 1 ieee80211, Live 0xf882a000
nsc_ircc 23184 0 - Live 0xf89c4000
serio_raw 7428 0 - Live 0xf88e4000
yenta_socket 27020 1 - Live 0xf89bc000
rsrc_nonstatic 12544 1 yenta_socket, Live 0xf88ef000
evdev 9984 3 - Live 0xf88eb000
usbcore 133508 6 usb_storage,usbhid,hci_usb,ehci_hcd,uhci_hcd, Live 0xf8a32000
firmware_class 10496 2 pcmcia,ipw3945, Live 0xf88e7000
ide_core 106780 2 usb_storage,generic, Live 0xf899e000
irda 192444 3 irtty_sir,sir_dev,nsc_ircc, Live 0xf89d9000
ohci1394 33968 0 - Live 0xf88d8000
ieee1394 95288 3 sbp2,eth1394,ohci1394, Live 0xf8981000
pcmcia_core 40212 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xf88c1000
pcspkr 3584 0 - Live 0xf882d000
sdhci 18188 0 - Live 0xf883a000
mmc_core 25600 1 sdhci, Live 0xf8861000
crc_ccitt 2560 1 irda, Live 0xf8828000

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 201
Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 90
Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ee000000-ee0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00006fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
I/O behind bridge: 00007000-00008fff
Memory behind bridge: ea000000-ebffffff
Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 201
Region 4: I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 74
Region 4: I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 66
Region 4: I/O ports at 1860 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 82
Region 4: I/O ports at 1880 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 82
Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00009000-0000cfff
Memory behind bridge: e4300000-e7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 255
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1810 [size=16]

00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 0: I/O ports at 18d0 [size=8]
Region 1: I/O ports at 18c4 [size=4]
Region 2: I/O ports at 18c8 [size=8]
Region 3: I/O ports at 18c0 [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at ee444400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Lenovo Thinkpad R60e model 0657
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 193
Region 4: I/O ports at 18e0 [size=32]

02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Subsystem: Lenovo Thinkpad X60s
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 98
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Capabilities: <access denied>

03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Subsystem: Intel Corporation Thinkpad X60s, R60e model 0657
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b4)
Subsystem: Lenovo Thinkpad X60s
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 201
Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: e0000000-e1fff000 (prefetchable)
Memory window 1: e6000000-e7fff000
I/O window 0: 00009000-000090ff
I/O window 1: 00009400-000094ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 09) (prog-if 10 [OHCI])
Subsystem: Lenovo Thinkpad X60s
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 74
Region 0: Memory at e4301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

15:00.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 18)
Subsystem: Lenovo Thinkpad X60s
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin C routed to IRQ 66
Region 0: Memory at e4301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>