From: Andi Kleen <ak@suse.de>
To: Steve Fox <drfickle@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>,
Martin Bligh <mbligh@mbligh.org>,
vgoyal@in.ibm.com, Andrew Morton <akpm@osdl.org>,
lkml <linux-kernel@vger.kernel.org>,
netdev@vger.kernel.org, kmannth@us.ibm.com,
Andy Whitcroft <apw@shadowen.org>
Subject: Re: 2.6.18-mm2 boot failure on x86-64
Date: Thu, 5 Oct 2006 20:27:02 +0200 [thread overview]
Message-ID: <200610052027.02208.ak@suse.de> (raw)
In-Reply-To: <1160071032.29690.19.camel@flooterbu>
On Thursday 05 October 2006 19:57, Steve Fox wrote:
> On Thu, 2006-10-05 at 17:40 +0200, Andi Kleen wrote:
>
> > Please don't snip the Code: line. It is fairly important.
>
> Sorry about that. The remote console I was using appears to overwrite
> some text after I force the reboot. Here's a clean one.
>
> global ffffffffffffffff
Ok that definitely shouldn't be in there.
I guess we need to track when it gets corrupted. Can you send the full
boot log with this patch applied?
-Andi
Index: linux-2.6.19-rc1-hack/init/main.c
===================================================================
--- linux-2.6.19-rc1-hack.orig/init/main.c
+++ linux-2.6.19-rc1-hack/init/main.c
@@ -75,6 +75,9 @@
static int init(void *);
+extern void bugcheck(char *, int);
+#define CHECK bugcheck(__FILE__, __LINE__)
+
extern void init_IRQ(void);
extern void fork_init(unsigned long);
extern void mca_init(void);
@@ -480,6 +483,8 @@ asmlinkage void __init start_kernel(void
char * command_line;
extern struct kernel_param __start___param[], __stop___param[];
+ CHECK;
+
smp_setup_processor_id();
/*
@@ -502,7 +507,9 @@ asmlinkage void __init start_kernel(void
page_address_init();
printk(KERN_NOTICE);
printk(linux_banner);
+ CHECK;
setup_arch(&command_line);
+ CHECK;
setup_per_cpu_areas();
smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
@@ -517,6 +524,7 @@ asmlinkage void __init start_kernel(void
* fragile until we cpu_idle() for the first time.
*/
preempt_disable();
+ CHECK;
build_all_zonelists();
page_alloc_init();
printk(KERN_NOTICE "Kernel command line: %s\n", saved_command_line);
@@ -525,6 +533,7 @@ asmlinkage void __init start_kernel(void
__stop___param - __start___param,
&unknown_bootoption);
sort_main_extable();
+ CHECK;
trap_init();
rcu_init();
init_IRQ();
@@ -533,8 +542,10 @@ asmlinkage void __init start_kernel(void
hrtimers_init();
softirq_init();
timekeeping_init();
+ CHECK;
time_init();
profile_init();
+ CHECK;
if (!irqs_disabled())
printk("start_kernel(): bug: interrupts were enabled early\n");
early_boot_irqs_on();
@@ -568,7 +579,9 @@ asmlinkage void __init start_kernel(void
#endif
vfs_caches_init_early();
cpuset_init_early();
+ CHECK;
mem_init();
+ CHECK;
kmem_cache_init();
setup_per_cpu_pageset();
numa_policy_init();
@@ -577,6 +590,7 @@ asmlinkage void __init start_kernel(void
calibrate_delay();
pidmap_init();
pgtable_cache_init();
+ CHECK;
prio_tree_init();
anon_vma_init();
#ifdef CONFIG_X86
@@ -586,12 +600,14 @@ asmlinkage void __init start_kernel(void
fork_init(num_physpages);
proc_caches_init();
buffer_init();
+ CHECK;
unnamed_dev_init();
key_init();
security_init();
vfs_caches_init(num_physpages);
radix_tree_init();
signals_init();
+ CHECK;
/* rootfs populating might need page-writeback */
page_writeback_init();
#ifdef CONFIG_PROC_FS
@@ -599,6 +615,7 @@ asmlinkage void __init start_kernel(void
#endif
cpuset_init();
taskstats_init_early();
+ CHECK;
delayacct_init();
check_bugs();
@@ -609,7 +626,7 @@ asmlinkage void __init start_kernel(void
rest_init();
}
-static int __initdata initcall_debug;
+static int __initdata initcall_debug = 1;
static int __init initcall_debug_setup(char *str)
{
@@ -639,7 +656,11 @@ static void __init do_initcalls(void)
printk("\n");
}
+ CHECK;
+
result = (*call)();
+
+ CHECK;
if (result && result != -ENODEV && initcall_debug) {
sprintf(msgbuf, "error code %d", result);
@@ -725,21 +746,32 @@ static int init(void * unused)
smp_prepare_cpus(max_cpus);
+ CHECK;
+
do_pre_smp_initcalls();
smp_init();
+
+ CHECK;
+
sched_init_smp();
cpuset_init_smp();
+ CHECK;
+
/*
* Do this before initcalls, because some drivers want to access
* firmware files.
*/
populate_rootfs();
+ CHECK;
+
do_basic_setup();
+ CHECK;
+
/*
* check if there is an early userspace init. If yes, let it do all
* the work
Index: linux-2.6.19-rc1-hack/net/xfrm/xfrm_policy.c
===================================================================
--- linux-2.6.19-rc1-hack.orig/net/xfrm/xfrm_policy.c
+++ linux-2.6.19-rc1-hack/net/xfrm/xfrm_policy.c
@@ -39,6 +39,16 @@ EXPORT_SYMBOL(xfrm_policy_count);
static DEFINE_RWLOCK(xfrm_policy_afinfo_lock);
static struct xfrm_policy_afinfo *xfrm_policy_afinfo[NPROTO];
+void bugcheck(char *where, int line)
+{
+ int i;
+ for (i = 0; i < NPROTO; i++)
+ if (xfrm_policy_afinfo[i] == (void *)-1UL) {
+ printk("afinfo corrupted at %s:%d\n",where,line);
+ return;
+ }
+}
+
static kmem_cache_t *xfrm_dst_cache __read_mostly;
static struct work_struct xfrm_policy_gc_work;
next prev parent reply other threads:[~2006-10-05 18:27 UTC|newest]
Thread overview: 140+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-28 8:46 2.6.18-mm2 Andrew Morton
2006-09-28 11:54 ` 2.6.18-mm2 Michal Piotrowski
2006-09-29 12:12 ` md deadlock (was Re: 2.6.18-mm2) Peter Zijlstra
2006-09-29 12:52 ` Neil Brown
2006-09-29 14:03 ` Peter Zijlstra
2006-10-02 13:47 ` Peter Zijlstra
2006-10-10 3:53 ` Neil Brown
2006-10-10 6:42 ` Ingo Molnar
2006-09-28 17:50 ` 2.6.18-mm2 Steve Fox
2006-09-28 19:00 ` 2.6.18-mm2 thunder7
2006-09-28 21:01 ` 2.6.18-mm2 Andrew Morton
2006-09-28 22:45 ` 2.6.18-mm2 Stephen Hemminger
2006-10-04 13:42 ` 2.6.18-mm2 boot failure on x86-64 Steve Fox
2006-10-04 15:45 ` Andrew Morton
2006-10-04 15:55 ` Vivek Goyal
2006-10-04 15:56 ` Andi Kleen
2006-10-05 1:57 ` Keith Mannthey
2006-10-04 16:41 ` Steve Fox
2006-10-05 0:06 ` Andrew Morton
2006-10-05 0:51 ` Vivek Goyal
2006-10-05 0:57 ` Andi Kleen
2006-10-05 1:08 ` Martin Bligh
2006-10-05 2:05 ` Keith Mannthey
2006-10-05 14:53 ` Steve Fox
2006-10-05 15:12 ` Badari Pulavarty
2006-10-05 15:32 ` Steve Fox
2006-10-05 15:40 ` Andi Kleen
2006-10-05 17:57 ` Steve Fox
2006-10-05 18:27 ` Andi Kleen [this message]
2006-10-05 18:51 ` Steve Fox
2006-10-05 19:05 ` Andi Kleen
2006-10-05 20:42 ` Steve Fox
2006-10-05 20:50 ` Andi Kleen
2006-10-06 2:23 ` Steve Fox
2006-10-06 14:33 ` Mel Gorman
2006-10-06 15:36 ` Vivek Goyal
2006-10-06 17:11 ` Mel Gorman
2006-10-06 17:34 ` Vivek Goyal
2006-10-06 17:59 ` Vivek Goyal
2006-10-06 18:03 ` Steve Fox
2006-10-06 20:04 ` Vivek Goyal
2006-10-09 9:53 ` Mel Gorman
2006-10-16 18:16 ` Vivek Goyal
2006-10-16 23:58 ` Andrew Morton
2006-10-17 12:18 ` Adrian Bunk
2006-10-17 17:32 ` Mel Gorman
2006-10-05 18:52 ` Vivek Goyal
2006-10-05 19:08 ` Andi Kleen
2006-10-05 20:25 ` Steve Fox
2006-10-05 20:39 ` Mel Gorman
2006-10-05 20:51 ` Andi Kleen
2006-10-05 23:14 ` 2.6.18-mm2 boot failure on x86-64 II Andi Kleen
2006-10-05 23:32 ` keith mannthey
2006-10-05 23:35 ` Andi Kleen
2006-10-05 23:58 ` keith mannthey
2006-10-06 0:02 ` Badari Pulavarty
2006-10-06 0:12 ` Andrew Morton
2006-09-28 22:39 ` 2.6.18-mm2 Jim Cromie
2006-09-28 23:08 ` 2.6.18-mm2 Andi Kleen
2006-09-29 20:14 ` 2.6.18-mm2 Ingo Molnar
2006-09-29 20:36 ` 2.6.18-mm2 Andi Kleen
2006-09-29 20:32 ` 2.6.18-mm2 Ingo Molnar
2006-09-29 20:58 ` 2.6.18-mm2 Andi Kleen
2006-09-29 21:14 ` [patch] fix !apic build breakage Ingo Molnar
2006-09-29 21:44 ` Andi Kleen
2006-09-29 21:41 ` Ingo Molnar
2006-09-29 21:44 ` 2.6.18-mm2 Alan Cox
2006-09-29 21:36 ` 2.6.18-mm2 Dave Jones
2006-09-29 21:46 ` 2.6.18-mm2 Andi Kleen
2006-09-28 22:44 ` 2.6.18-mm2 Matthias Hentges
2006-09-29 3:19 ` 2.6.18-mm2 - oops in cache_alloc_refill() Valdis.Kletnieks
2006-09-29 3:29 ` Andrew Morton
2006-09-29 3:58 ` Valdis.Kletnieks
2006-09-29 15:19 ` Valdis.Kletnieks
2006-09-29 19:45 ` Andrew Morton
2006-09-30 0:01 ` Valdis.Kletnieks
2006-09-30 1:20 ` Andrew Morton
2006-09-30 1:33 ` Jean Tourrilhes
2006-09-30 3:31 ` Valdis.Kletnieks
2006-09-30 7:50 ` Valdis.Kletnieks
2006-09-30 8:33 ` Andrew Morton
2006-09-30 1:40 ` Jean Tourrilhes
2006-09-30 3:31 ` Valdis.Kletnieks
2006-09-30 1:57 ` Makefile for linux modules x z
2006-09-30 8:55 ` Sam Ravnborg
2006-09-30 1:59 ` x z
2006-10-02 17:52 ` 2.6.18-mm2 - oops in cache_alloc_refill() Jean Tourrilhes
2006-10-02 19:57 ` Valdis.Kletnieks
2006-10-03 15:58 ` Samuel Tardieu
2006-10-03 16:34 ` Jean Tourrilhes
2006-10-03 16:45 ` Samuel Tardieu
2006-10-03 17:07 ` Jean Tourrilhes
2006-10-05 22:37 ` Pavel Roskin
2006-10-05 22:42 ` Jean Tourrilhes
2006-09-29 19:47 ` Christoph Lameter
2006-09-29 13:57 ` 2.6.18-mm2 J.A. Magallón
2006-09-29 14:39 ` 2.6.18-mm2 Matthew Wilcox
2006-09-29 17:15 ` 2.6.18-mm2 Alan Cox
2006-09-29 23:50 ` 2.6.18-mm2 Frederik Deweerdt
2006-09-29 23:43 ` 2.6.18-mm2 Alan Cox
2006-09-30 14:09 ` [-mm patch] aic7xxx: check irq validity (was Re: 2.6.18-mm2) Frederik Deweerdt
2006-09-30 14:19 ` Alan Cox
2006-09-30 13:51 ` Willy Tarreau
2006-09-30 23:58 ` Jeff Garzik
2006-10-01 14:28 ` Matthew Wilcox
2006-10-01 19:05 ` Arjan van de Ven
2006-10-01 19:19 ` Jeff Garzik
2006-10-01 19:34 ` Arjan van de Ven
2006-10-01 19:36 ` Matthew Wilcox
2006-10-01 19:42 ` Jeff Garzik
2006-10-02 2:12 ` Arjan van de Ven
2006-10-02 20:00 ` [RFC PATCH] pci_request_irq (was [-mm patch] aic7xxx: check irq validity) Frederik Deweerdt
2006-10-02 18:15 ` Matthew Wilcox
2006-10-02 21:09 ` Frederik Deweerdt
2006-10-02 20:07 ` [RFC PATCH] move aic7xxx to pci_request_irq Frederik Deweerdt
2006-10-02 18:27 ` Matthew Wilcox
2006-10-02 21:02 ` Frederik Deweerdt
2006-10-03 3:45 ` Arjan van de Ven
2006-10-02 20:11 ` [RFC PATCH] move tg3 " Frederik Deweerdt
2006-10-02 18:28 ` Matthew Wilcox
2006-10-02 21:04 ` Frederik Deweerdt
2006-10-03 7:18 ` Arjan van de Ven
2006-10-02 20:12 ` [RFC PATCH] move drm " Frederik Deweerdt
2006-10-02 18:37 ` Matthew Wilcox
2006-10-02 21:07 ` Frederik Deweerdt
2006-10-02 20:36 ` Alan Cox
2006-10-02 22:26 ` Frederik Deweerdt
2006-10-02 23:54 ` Dave Airlie
2006-10-03 7:17 ` Frederik Deweerdt
2006-10-03 3:58 ` [RFC PATCH] pci_request_irq (was [-mm patch] aic7xxx: check irq validity) Randy Dunlap
2006-10-01 21:31 ` [-mm patch] aic7xxx: check irq validity (was Re: 2.6.18-mm2) Frederik Deweerdt
2006-09-30 15:26 ` 2.6.18-mm2 James Bottomley
2006-09-30 16:21 ` 2.6.18-mm2 Matthew Wilcox
2006-09-30 17:20 ` 2.6.18-mm2 Mark Rustad
2006-09-30 20:54 ` 2.6.18-mm2 Alan Cox
2006-09-29 23:15 ` 2.6.18-mm2 J.A. Magallón
2006-09-30 7:04 ` 2.6.18-mm2 - possible recursive locking detected Borislav Petkov
2006-09-30 8:28 ` Andrew Morton
2006-09-30 18:19 ` Davide Libenzi
[not found] ` <20060930133706.GA3291@melchior.yamamaya.is-a-geek.org>
2006-09-30 19:53 ` 2.6.18-mm2 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200610052027.02208.ak@suse.de \
--to=ak@suse.de \
--cc=akpm@osdl.org \
--cc=apw@shadowen.org \
--cc=drfickle@us.ibm.com \
--cc=kmannth@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mbligh@mbligh.org \
--cc=netdev@vger.kernel.org \
--cc=pbadari@us.ibm.com \
--cc=vgoyal@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox