MMC: When rescanning cards check existing cards after mmc_setup()

[Timo Teras <timo.teras@solidboot.com>]

Some broken cards seem to process CMD1 even in stand-by state. The result is
that the card replies with ILLEGAL_COMMAND error for the next command sent
after rescanning. Currently the next command is select card, which would
return the error. But the CMD7 does actually succeed and retries of the
command will timeout. The solution is to poll card status after the CMD1
which clears the cached error.

Signed-off-by: Timo Teras <timo.teras@solidboot.com>

---

 drivers/mmc/mmc.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

97675ada7049d12523aa9e9908d4613dfd333641
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index ee8863c..3324b6e 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1178,14 +1178,17 @@ static void mmc_rescan(void *data)
 {
 	struct mmc_host *host = data;
 	struct list_head *l, *n;
+	unsigned char power_mode;
 
 	mmc_claim_host(host);
 
-	if (host->ios.power_mode == MMC_POWER_ON)
-		mmc_check_cards(host);
+	power_mode = host->ios.power_mode;
 
 	mmc_setup(host);
 
+	if (power_mode == MMC_POWER_ON)
+		mmc_check_cards(host);
+
 	if (!list_empty(&host->cards)) {
 		/*
 		 * (Re-)calculate the fastest clock rate which the
-- 
1.2.3.g90cc1