* [PATCH 6/6] atm/ambassador: use bitrev8
@ 2006-10-18 16:49 Akinobu Mita
0 siblings, 0 replies; only message in thread
From: Akinobu Mita @ 2006-10-18 16:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Chas Williams, Giuliano Procida at Madge Networks
Use bitrev8 for ambassador driver.
Cc: Chas Williams <linux-atm-general@lists.sourceforge.net>
Cc: Giuliano Procida at Madge Networks <gprocida@madge.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
drivers/atm/Kconfig | 1 +
drivers/atm/ambassador.c | 17 +++--------------
2 files changed, 4 insertions(+), 14 deletions(-)
Index: work-fault-inject/drivers/atm/ambassador.c
===================================================================
--- work-fault-inject.orig/drivers/atm/ambassador.c
+++ work-fault-inject/drivers/atm/ambassador.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/poison.h>
+#include <linux/bitrev.h>
#include <asm/atomic.h>
#include <asm/io.h>
@@ -2068,18 +2069,6 @@ static void __devinit amb_ucode_version
PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor);
}
-// swap bits within byte to get Ethernet ordering
-static u8 bit_swap (u8 byte)
-{
- const u8 swap[] = {
- 0x0, 0x8, 0x4, 0xc,
- 0x2, 0xa, 0x6, 0xe,
- 0x1, 0x9, 0x5, 0xd,
- 0x3, 0xb, 0x7, 0xf
- };
- return ((swap[byte & 0xf]<<4) | swap[byte>>4]);
-}
-
// get end station address
static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
u32 lower4;
@@ -2101,9 +2090,9 @@ static void __devinit amb_esi (amb_dev *
PRINTDB (DBG_INIT, "ESI:");
for (i = 0; i < ESI_LEN; ++i) {
if (i < 4)
- esi[i] = bit_swap (lower4>>(8*i));
+ esi[i] = bitrev8(lower4>>(8*i));
else
- esi[i] = bit_swap (upper2>>(8*(i-4)));
+ esi[i] = bitrev8(upper2>>(8*(i-4)));
PRINTDM (DBG_INIT, " %02x", esi[i]);
}
Index: work-fault-inject/drivers/atm/Kconfig
===================================================================
--- work-fault-inject.orig/drivers/atm/Kconfig
+++ work-fault-inject/drivers/atm/Kconfig
@@ -242,6 +242,7 @@ config ATM_IDT77252_USE_SUNI
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
depends on PCI && ATM
+ select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
Networks Ltd. Say Y (or M to compile as a module named ambassador)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-10-18 16:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-18 16:49 [PATCH 6/6] atm/ambassador: use bitrev8 Akinobu Mita
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox