idecd: attempt to access beyond end of device

Sebastian Kemper
2006-11-12T12:11:15Z

Hello list,

I'm getting these errors trying to mount a burned DVD-R:

Nov 8 12:39:08 section_eight attempt to access beyond end of device
Nov 8 12:39:08 section_eight hdc: rw=0, want=68, limit=4
Nov 8 12:39:08 section_eight isofs_fill_super: bread failed, dev=hdc,
iso_blknum=16, block=1

The drive is a NEC ND-4550A ATAPI. I use idecd and kernel 2.6.18.2.

DVD+R discs mount just fine. There were no errors while burning the
DVD-R. I tried k3b(-0.12.17),
cdrecord(-2.01.01_alpha10/-2.01.01_alpha20) and growisofs-6.1/-7.0. The
drive is flashed with the latest firmware and the manufacturer claims my
16x DVD-R media is supported.

I can actually mount the burned DVD-R in my other DVD-ROM drive (it's a
read-only device, LITE-ON DVD SOHD-16P9SV).

I'm a bit lost because I can't figure out the proper place to report
this bug. I already posted to k3b-user but got no response. If you could
direct me to the proper person to talk to I'd be happy.

./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux section_eight 2.6.18.2 #1 Mon Nov 6 12:06:35 CET 2006 i686 AMD
Sempron(tm) 2400+ AuthenticAMD GNU/Linux

Gnu C 4.1.1
Gnu make 3.81
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
Linux C Library > libc.2.4
Dynamic linker (ldd) 2.4
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 6.4
udev 087
Modules Loaded rt61 snd_seq_midi snd_seq_midi_event snd_seq
snd_ice1712 snd_ice17xx_ak4xxx snd_ak4xxx_adda snd_cs8427 snd_ac97_codec
snd_pcm snd_timer snd_page_alloc snd_ac97_bus snd_i2c snd_mpu401_uart
snd_rawmidi snd_seq_device snd lirc_serial lirc_dev

Thanks
Sebastian